from me: change from OSL+GPL to GPL (with approval)

from Mark: Gets rid of an unneeded control bit, slightly increasing
throughput.

Patch to fix sata_nv handling of NVIDIA MCP51/55
Signed-off-by: NAndy Currid <acurrid@nvidia.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

This patch adds support for sil_3131 and sil_3531.  Both are
identical to 3124 except that they have only one port.  Bits 30 and 31
of ata_port_info->host_flags is used to encode available port numbers.
Version number is bumped to 0.22.

Edward Falk supplied all the necessary information and preliminary
patch.
Signed-off-by: NTejun Heo <htejun@gmail.com>

This patch removes unused NR_PORTS macro and adds termination entry
to sil24_pci_tbl.
Signed-off-by: NTejun Heo <htejun@gmail.com>

  - change "xlat" and "fill" actors in libata-scsi so
    they are responsible for SCSI status and sense data
    when they return 1. This allows GOOD status or a
    specialized error to be set.
  - yield an error for mode sense requests for saved
    values [sat-r06]
  - remove static inlines for ata_bad_scsiop() and
    ata_bad_cdb() which are no longer used
Signed-off-by: NDouglas Gilbert <dougg@torque.net>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

  - add extern ata_scsi_set_sense() to build SCSI
    fixed sense data and corresponding SCSI status
Signed-off-by: NDouglas Gilbert <dougg@torque.net>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

The nameidata "last.name" is always allocated with "__getname()", and
should always be free'd with "__putname()".

Using "putname()" without the underscores will leak memory, because the
allocation will have been hidden from the AUDITSYSCALL code.

Arguably the real bug is that the AUDITSYSCALL code is really broken,
but in the meantime this fixes the problem people see.

Reported by Robert Derr, patch by Rick Lindsley.
Acked-by: NAl Viro <viro@ftp.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I've noticed a kernel hang during a storm of CMC interrupts, which was
tracked down to the continual execution of the interrupt handler.

There's code in the CMC handler that's supposed to disable CMC
interrupts and switch to polling mode when it sees a bunch of CMCs.
Because disabling CMCs across all CPUs isn't safe in interrupt context,
the disable is done with a schedule_work().  But with continual CMC
interrupts, the schedule_work() never gets executed.

The following patch immediately disables CMC interrupts for the current
CPU.  This then allows (at least) one CPU to ignore CMC interrupts,
execute the schedule_work() code, and disable CMC interrupts on the rest
of the CPUs.
Acked-by: NKeith Owens <kaos@sgi.com>
Signed-off-by: NBryan Sutula <Bryan.Sutula@hp.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

 Hello, guys.

 This patch implements ->tf_read callback for sil24.  It didn't use to
be necessary but new ata_gen_fixed_sense now makes use of ->tf_read
callback.  This patch is taken from Edward Falk's driver.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

drivers/mfd/ucb1x00-core.c:555: error: static declaration of 'ucb1x00_class' follows non-static declaration
drivers/mfd/ucb1x00.h:109: error: previous declaration of 'ucb1x00_class' was here

Since ucb1x00_class isn't used by anything, remove the extern
declaration and the symbol export.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

03_sil24_add-tf-reading.patch

	This patch implements proper TF register reading back and
	caching and bumps up version to 0.22.  This is taken from
	Edward's driver.
Signed-off-by: NTejun Heo <htejun@gmail.com>

 sata_sil24.c |   50 +++++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 45 insertions(+), 5 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

02_sil24_remove-cmderr-clearing.patch

	CMDERR register doesn't need clearing.  This is from Edward's
	driver.
Signed-off-by: NTejun Heo <htejun@gmail.com>

 sata_sil24.c |    4 ----
 1 file changed, 4 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

01_sil24_ignore-non-error-exception-irqs.patch

	Do not error-finish commands for non-error exception irqs -
	just ignore them.  This is taken from Edward's driver.
Signed-off-by: NTejun Heo <htejun@gmail.com>

 sata_sil24.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

A few code shuffles, to make merging future code easier.

Add (DRIVER_SENSE << 24) to certain result codes, as noted by Douglas
Gilbert.

By allocating early memory for the firmware page tables, we
can write over the beginning of the initrd image.

So what we do now is:

1) Read in firmware translations table while still on the
   firmware's trap table.
2) Switch to Linux trap table.
3) Init bootmem.
4) Build firmware page tables using __alloc_bootmem().

And this keeps the initrd from being clobbered.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Patch from Catalin Marinas

There is no reason to not allow these config options. They are useful when
the hardware has problems.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

shuffle ifdef location to fix the following warning:
drivers/scsi/sata_mv.c:471: warning: 'mv_dump_mem' defined but not used

adds helpful function header comments.
Signed-off-by: NBrett Russ <russb@emc.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

This should fix up lockups that people were seeing due to
improper spinlock placement.  Also, the start/stop DMA routines put
guarded trust in the cached state of DMA.
Signed-off-by: NBrett Russ <russb@emc.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

No content changes, just moving code around.

Remove some duplicated items due to the inclusion of the general
drivers/Kconfig file. These are now taken from drivers/char/Kconfig,
and can be turned off there as well (which is desirable sometimes).
Signed-off-by: NMartin Habets <errandir_news@mph.eclipse.co.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since changeset 98a82feb AX.25 is passing
received IP and ARP packets to the stack through netif_rx() but we don't
set the skb->mac.raw to right value which may result in a crash with
applications that use a packet socket.
Signed-off-by: NRalf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Here is a patch that adds a helper called xfrm_policy_id2dir to
document the fact that the policy direction can be and is derived
from the index.

This is based on a patch by YOSHIFUJI Hideaki and 210313105@suda.edu.cn.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Timer set up by pneigh_enqueue() ended up calling ndisc_rcv()
via pndisc_redo(), which clears LOCALLY_ENQUEUED flag in
NEIGH_CB(skb) and NS was queued again.
Let's call ndisc_recv_ns() directly to avoid the loop.
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Missing parenthesis in causes BIC to be slow in increasing congestion
window.

Spotted by Injong Rhee.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-Off-By: NYan Zheng <yanzheng@21cn.com>
Acked-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Acked-by: NDavid L Stevens <dlstevens@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1) note urgent bug, that completes command twice

2) only fix up INQUIRY data if the SCSI version is zero (typically
indicates ATAPI MMC-ish device)

3) if there is a problem on the ATA bus, don't bother with REQUEST
SENSE, just directly handle the error based on Status/Error registers.

Just enables some extra printk's, but still..  Only the sysadmin should
be able to do that.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Older Macs which uses the VIA chip timers to calibrate the timebase used
some code that wouldn't work if HZ wasn't divisible by 100...

This fixes it at least for 250.  Not totally perfect but should be
enough for now (so it at least works with the default value which is now
250).

There is still a potential issue with the core using CLOCK_TICK_RATE to
maintain xtime and CLOCK_TICK_RATE value on ppc32 is pure crap, but that
is a different problem, this patch at least brings us back to our
previous situation.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If we switch extern inline to static inline, we'd better switch the
pre-declarations we use to say that these puppies have
__attribute_const__ on them.

Otherwise we get extern declaration followed by static inline one.
Which makes gcc unhappy, and for a good reason...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>