The variable pm_flags is used to prevent APM from being enabled
along with ACPI, which would lead to problems.  However, acpi_init()
is always called before apm_init() and after acpi_init() has
returned, it is known whether or not ACPI will be used.  Namely, if
acpi_disabled is not set after acpi_init() has returned, this means
that ACPI is enabled.  Thus, it is sufficient to check acpi_disabled
in apm_init() to prevent APM from being enabled in parallel with
ACPI.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NLen Brown <len.brown@intel.com>

The dpm_prepare() function increments the runtime PM reference
counters of all devices to prevent pm_runtime_suspend() from
executing subsystem-level callbacks.  However, this was supposed to
guard against a specific race condition that cannot happen, because
the power management workqueue is freezable, so pm_runtime_suspend()
can only be called synchronously during system suspend and we can
rely on subsystems and device drivers to avoid doing that
unnecessarily.

Make dpm_prepare() drop the runtime PM reference to each device
after making sure that runtime resume is not pending for it.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NKevin Hilman <khilman@ti.com>

CONFIG_PM_SLEEP_ADVANCED_DEBUG is not used any more, so drop it
and CONFIG_CAN_PM_TRACE need not depend on EXPERIMENTAL, so remove
that dependency.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

After redefining CONFIG_PM to depend on (CONFIG_PM_SLEEP ||
CONFIG_PM_RUNTIME) the CONFIG_PM_OPS option is redundant and can be
replaced with CONFIG_PM.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Reorder configuration options in kernel/power/Kconfig so that
the options depended on are at the top of the list.

This patch doesn't introduce any functional changes.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

From the users' point of view CONFIG_PM is really only used for
making it possible to set CONFIG_SUSPEND, CONFIG_HIBERNATION,
CONFIG_PM_RUNTIME and (surprisingly enough) CONFIG_XEN_SAVE_RESTORE
(CONFIG_PM_OPP also depends on CONFIG_PM, but quite artificially).
However, both CONFIG_SUSPEND and CONFIG_HIBERNATION require platform
support (independent of CONFIG_PM) and it is not quite obvious that
CONFIG_PM has to be set for CONFIG_XEN_SAVE_RESTORE to be available.
Thus, from the users' point of view, it would be more logical to
automatically select CONFIG_PM if any of the above options depending
on it are set.

Make CONFIG_PM depend on (CONFIG_PM_SLEEP || CONFIG_PM_RUNTIME),
which will cause it to be selected when any of CONFIG_SUSPEND,
CONFIG_HIBERNATION, CONFIG_PM_RUNTIME, CONFIG_XEN_SAVE_RESTORE is
set and will clarify its meaning.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

If direct references to pm_flags are removed from drivers/acpi/bus.c,
CONFIG_ACPI will not need to depend on CONFIG_PM any more.  Make that
happen.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NLen Brown <len.brown@intel.com>

Currently, wakeup sysfs attributes are created for all devices,
regardless of whether or not they are wakeup-capable.  This is
excessive and complicates wakeup device identification from user
space (i.e. to identify wakeup-capable devices user space has to read
/sys/devices/.../power/wakeup for all devices and see if they are not
empty).

Fix this issue by avoiding to create wakeup sysfs files for devices
that cannot wake up the system from sleep states (i.e. whose
power.can_wakeup flags are unset during registration) and modify
device_set_wakeup_capable() so that it adds (or removes) the relevant
sysfs attributes if a device's wakeup capability status is changed.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

A subsequent patch will modify device_set_wakeup_capable() in such
a way that it will call functions which may sleep and therefore it
shouldn't be called under spinlocks.  In preparation to that, modify
usb_set_device_state() to avoid calling device_set_wakeup_capable()
under device_state_lock.
Tested-by: NMinchan Kim <minchan.kim@gmail.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>

printk()s without a priority level default to KERN_WARNING. To reduce
noise at KERN_WARNING, this patch sets the priority level appriopriately
for unleveled printks()s. This should be useful to folks that look at
dmesg warnings closely.

Changed these messages to pr_info().
Signed-off-by: NMandeep Singh Baines <msb@chromium.org>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Since pm_save_wakeup_count() has just been changed to clear
events_check_enabled unconditionally before checking if there are
any new wakeup events registered since the last read from
/sys/power/wakeup_count, the detection of wakeup events during
suspend may be disabled, after it's been enabled, by writing a
"wrong" value back to /sys/power/wakeup_count.  For this reason,
it is not necessary to update events_check_enabled in
pm_get_wakeup_count() any more.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

According to Documentation/ABI/testing/sysfs-power, the
/sys/power/wakeup_count interface should only make the kernel react
to wakeup events during suspend if the last write to it has been
successful.  However, if /sys/power/wakeup_count is written to two
times in a row, where the first write is successful and the second
is not, the kernel will still react to wakeup events during suspend
due to a bug in pm_save_wakeup_count().

Fix the bug by making pm_save_wakeup_count() clear
events_check_enabled unconditionally before checking if there are
any new wakeup events registered since the previous read from
/sys/power/wakeup_count.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

The memory barrier in wakeup_source_deactivate() is supposed to
prevent the callers of pm_wakeup_pending() and pm_get_wakeup_count()
from seeing the new value of events_in_progress (0, in particular)
and the old value of event_count at the same time.  However, if
wakeup_source_deactivate() is executed by CPU0 and, for instance,
pm_wakeup_pending() is executed by CPU1, where both processors can
reorder operations, the memory barrier in wakeup_source_deactivate()
doesn't affect CPU1 which can reorder reads.  In that case CPU1 may
very well decide to fetch event_count before it's modified and
events_in_progress after it's been updated, so pm_wakeup_pending()
may fail to detect a wakeup event.  This issue can be addressed by
using a single atomic variable to store both events_in_progress
and event_count, so that they can be updated together in a single
atomic operation.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

oom_kill_process() starts with victim_points == 0.  This means that
(most likely) any child has more points and can be killed erroneously.

Also, "children has a different mm" doesn't match the reality, we should
check child->mm != t->mm.  This check is not exactly correct if t->mm ==
NULL but this doesn't really matter, oom_kill_task() will kill them
anyway.

Note: "Kill all processes sharing p->mm" in oom_kill_task() is wrong
too.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFS: NFSROOT should default to "proto=udp"
  nfs4: remove duplicated #include
  NFSv4: nfs4_state_mark_reclaim_nograce() should be static
  NFSv4: Fix the setlk error handler
  NFSv4.1: Fix the handling of the SEQUENCE status bits
  NFSv4/4.1: Fix nfs4_schedule_state_recovery abuses
  NFSv4.1 reclaim complete must wait for completion
  NFSv4: remove duplicate clientid in struct nfs_client
  NFSv4.1: Retry CREATE_SESSION on NFS4ERR_DELAY
  sunrpc: Propagate errors from xs_bind() through xs_create_sock()
  (try3-resend) Fix nfs_compat_user_ino64 so it doesn't cause problems if bit 31 or 63 are set in fileid
  nfs: fix compilation warning
  nfs: add kmalloc return value check in decode_and_add_ds
  SUNRPC: Remove resource leak in svc_rdma_send_error()
  nfs: close NFSv4 COMMIT vs. CLOSE race
  SUNRPC: Close a race in __rpc_wait_for_completion_task()

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon: fix problem with changing active VRAM size. (v2)

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  watchdog: hpwdt: eliminate section mismatch warning
  watchdog: w83697ug_wdt: Fix set bit 0 to activate GPIO2
  watchdog: sch311x_wdt: fix printk condition
  watchdog: sch311x_wdt: Fix LDN active check
  watchdog: cpwd: Fix buffer-overflow

The kernel automatically evaluates partition tables of storage devices.
The code for evaluating OSF partitions contains a bug that leaks data
from kernel heap memory to userspace for certain corrupted OSF
partitions.

In more detail:

  for (i = 0 ; i < le16_to_cpu(label->d_npartitions); i++, partition++) {

iterates from 0 to d_npartitions - 1, where d_npartitions is read from
the partition table without validation and partition is a pointer to an
array of at most 8 d_partitions.

Add the proper and obvious validation.
Signed-off-by: NTimo Warns <warns@pre-sense.de>
Cc: stable@kernel.org
[ Changed the patch trivially to not repeat the whole le16_to_cpu()
  thing, and to use an explicit constant for the magic value '8' ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

THP's collapse_huge_page() has an understandable but ugly difference
in when its huge page is allocated: inside if NUMA but outside if not.
It's hardly surprising that the memcg failure path forgot that, freeing
the page in the non-NUMA case, then hitting a VM_BUG_ON in get_page()
(or even worse, using the freed page).
Signed-off-by: NHugh Dickins <hughd@google.com>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

hpwdt_init_nmi_decoding() is called in hpwdt_init_one error handling,
thus remove the  __devexit annotation of hpwdt_exit_nmi_decoding().

This patch fixes below warning:

WARNING: drivers/watchdog/hpwdt.o(.devinit.text+0x36f): Section mismatch in reference from the function hpwdt_init_one() to the function .devexit.text:hpwdt_exit_nmi_decoding()
The function __devinit hpwdt_init_one() references
a function __devexit hpwdt_exit_nmi_decoding().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
hpwdt_exit_nmi_decoding() so it may be used outside an exit section.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NThomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

outb_p(c || 0x01, WDT_EFDR); -> || should be |
Reported-By: NToralf Förster <toralf.foerster@gmx.de>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

"==" has higher precedence than "&".  Since
if (sch311x_sio_inb(sio_config_port, 0x30) & (0x01 == 0)) is always
false the message is never printed.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

if (sch311x_sio_inb(sio_config_port, 0x30) && 0x01 == 0) -> && should be &
Reported-By: NToralf Förster <toralf.foerster@gmx.de>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

cppcheck-1.47 reports:
[drivers/watchdog/cpwd.c:650]: (error) Buffer access out-of-bounds: p.devs

The source code is
	for (i = 0; i < 4; i++) {
		misc_deregister(&p->devs[i].misc);

where devs is defined as WD_NUMDEVS big and WD_NUMDEVS is equal to 3.
So the 4 should be a 3 or WD_NUMDEVS.

Reported-By: David Binderman
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

So we used to use lpfn directly to restrict VRAM when we couldn't
access the unmappable area, however this was removed in
93225b0d as it also restricted
the gtt placements. However it was only later noticed that this
broke on some hw.

This removes the active_vram_size, and just explicitly sets it
when it changes, TTM/drm_mm will always use the real_vram_size,
and the active vram size will change the TTM size used for lpfn
setting.

We should re-work the fpfn/lpfn to per-placement at some point
I suspect, but that is too late for this kernel.

Hopefully this addresses:
https://bugs.freedesktop.org/show_bug.cgi?id=35254

v2: fix reported useful VRAM size to userspace to be correct.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fix for a dumb preadv()/pwritev() compat bug - unlike the native
variants, the compat_...  ones forget to check FMODE_P{READ,WRITE}, so
e.g.  on pipe the native preadv() will fail with -ESPIPE and compat one
will act as readv() and succeed.

Not critical, but it's a clear bug with trivial fix, so IMO it's OK for
-final.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon/f71882fg: Set platform drvdata to NULL later
  hwmon/f71882fg: Fix a typo in a comment

* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: break out of shrink_delalloc earlier
  btrfs: fix not enough reserved space
  btrfs: fix dip leak
  Btrfs: make sure not to return overlapping extents to fiemap
  Btrfs: deal with short returns from copy_from_user
  Btrfs: fix regressions in copy_from_user handling

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] target: Fix t_transport_aborted handling in LUN_RESET + active I/O shutdown

Recent change to fixdep:

    commit b7bd1821
    Author: Michal Marek <mmarek@suse.cz>
    Date:   Thu Feb 17 15:13:54 2011 +0100

    fixdep: Do not record dependency on the source file itself

changed the format of the *.cmd files without realizing that it is also
used by modpost. Put the path to the source file to the file back, in a
special variable, so that modpost sees all source files when calculating
srcversion for modules.
Reported-and-tested-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NMichal Marek <mmarek@suse.cz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.infradead.org/users/dwmw2/mtd-2.6.38:
  mtd: add "platform:" prefix for platform modalias
  mtd: mtd_blkdevs: fix double free on error path
  mtd: amd76xrom: fix oops at boot when resources are not available
  mtd: fix race in cfi_cmdset_0001 driver
  mtd: jedec_probe: initialise make sector erase command variable
  mtd: jedec_probe: Change variable name from cfi_p to cfi

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon: fix page flipping hangs on r300/r400
  drm/radeon: add pageflip hooks for fusion

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: fix mis-synchronisation in blkdev_issue_zeroout()

* 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ASoC: Ensure WM8958 gets all WM8994 late revision widgets
  ASoC: Fix typo in late revision WM8994 DAC2R name
  ASoC: Use the correct DAPM context when cleaning up final widget set
  ASoC: Fix broken bitfield definitions in WM8978
  ASoC: AM3517: Update codec name after multi-component update

The device table is required to load modules based on modaliases.

After adding MODULE_DEVICE_TABLE, below entries will be added to
modules.pcimap:

  pch_gpio             0x00008086 0x00008803 0xffffffff 0xffffffff 0x00000000 0x00000000 0x0
  ml_ioh_gpio          0x000010db 0x0000802e 0xffffffff 0xffffffff 0x00000000 0x00000000 0x0
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Cc: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When vmscan.c calls page_referenced(), if an anon page was created
before a process forked, rmap will search for it in both of the
processes, even though one of them might have since broken COW.

If the child process mlocks the vma where the COWed page belongs to,
page_referenced() running on the page mapped by the parent would lead to
*vm_flags getting VM_LOCKED set erroneously (leading to the references
on the parent page being ignored and evicting the parent page too
early).

*mapcount would also be decremented by page_referenced_one even if the
page wasn't found by page_check_address.

This also lets pmdp_clear_flush_young_notify() go ahead on a
pmd_trans_splitting() pmd.

We hold the page_table_lock so __split_huge_page_map() must wait the
pmdp_clear_flush_young_notify() to complete before it can modify the
pmd.  The pmd is also still mapped in userland so the young bit may
materialize through a tlb miss before split_huge_page_map runs.

This will provide a more accurate page_referenced() behavior during
split_huge_page().
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Reported-by: NMichel Lespinasse <walken@google.com>
Reviewed-by: NMichel Lespinasse <walken@google.com>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Reviewed-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel<riel@redhat.com>
Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This avoids a possible race leading to trying to dereference NULL.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NJean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>

Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>

We've been getting reports of complete system lockups with rv3xx hw on
AGP and PCIE when running gnome-shell or kwin with compositing.

It appears the hw really doesn't like setting these registers while
stuff is running, this moves the setting of the registers into the modeset
since they aren't required to be changed anywhere else.

fixes: https://bugs.freedesktop.org/show_bug.cgi?id=35183

Reported-and-tested-by: Álmos <aaalmosss@gmail.com
Signed-off-by: NDave Airlie <airlied@redhat.com>

Josef had changed shrink_delalloc to exit after three shrink
attempts, which wasn't quite enough because new writers could
race in and steal free space.

But it also fixed deadlocks and stalls as we tried to recover
delalloc reservations.  The code was tweaked to loop 1024
times, and would reset the counter any time a small amount
of progress was made.  This was too drastic, and with a
lot of writers we can end up stuck in shrink_delalloc forever.

The shrink_delalloc loop is fairly complex because the caller is looping
too, and the caller will go ahead and force a transaction commit to make
sure we reclaim space.

This reworks things to exit shrink_delalloc when we've forced some
writeback and the delalloc reservations have gone down.  This means
the writeback has not just started but has also finished at
least some of the metadata changes required to reclaim delalloc
space.

If we've got this wrong, we're returning ENOSPC too early, which
is a big improvement over the current behavior of hanging the machine.

Test 224 in xfstests hammers on this nicely, and with 1000 writers
trying to fill a 1GB drive we get our first ENOSPC at 93% full.  The
other writers are able to continue until we get 100%.

This is a worst case test for btrfs because the 1000 writers are doing
small IO, and the small FS size means we don't have a lot of room
for metadata chunks.
Signed-off-by: NChris Mason <chris.mason@oracle.com>