If user tries to set an invalid MTU value, l2cap_sock_setsockopt_old
should return -EINVAL.
Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

This patch changes the default MTU value for L2CAP ATT fixed channel
to L2CAP_DEFAULT_MTU (672 octets).

Differently from others L2CAP channels, in L2CAP ATT fixed channel
there is no MTU negotiation. The MTU value for that channel is up to
the L2CAP implementation. The only restriction in L2CAP spec is the
MTU value must not be less than 23 octets.

At ATT protocol level (on top of L2CAP), we have the ATT_MTU which
defines the maximum size of any ATT message sent between client and
server. GATT profile defines ATT_MTU default value to 23 octets. If
a GATT based profile wants to use ATT_MTU greater than 23 octets
(e.g. HID over GATT profile), it should negotiate a new value by
executing the GATT Exchange MTU sub-procedure.

Thus, in order to support any value of ATT_MTU negotiated at ATT
protocol level, our L2CAP implementation should have L2CAP ATT
fixed channel MTU equal or greater than ATT_MAX_MTU (512 octets).
Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

This patch changes way LE Connection Complete event with error status are
handled. BDADDR returned in such event packet do not need to be valid and
should not be used to search for existing hci_conn. Instead, any hci_conn
with BT_CONNECT state should be matched since there can be only one
pending LE outgoing connection at any time.

If not handled properly, appriopriate hci_conn will not be removed and
subsequent connection to given peer will try to reuse it without making
actual connection attempt.

2012-05-07 11:21:39.133378 < HCI Command: LE Create Connection (0x08|0x000d) plen 25
    bdaddr 00:22:D0:10:13:EE type 1
2012-05-07 11:21:39.138774 > HCI Event: Command Status (0x0f) plen 4
    LE Create Connection (0x08|0x000d) status 0x00 ncmd 1
2012-05-07 11:21:44.752854 < HCI Command: LE Create Connection Cancel (0x08|0x000e) plen 0
2012-05-07 11:21:44.759475 > HCI Event: Command Complete (0x0e) plen 4
    LE Create Connection Cancel (0x08|0x000e) ncmd 1
2012-05-07 11:21:44.764479 > HCI Event: LE Meta Event (0x3e) plen 19
    LE Connection Complete
      status 0x02 handle 0, role master
      bdaddr 00:00:00:00:00:00 (Public)

[14898.739425] [6603] hci_connect: hci0 dst 00:22:D0:10:13:EE
[14898.739429] [6603] hci_conn_add: hci0 dst 00:22:D0:10:13:EE
[14898.739434] [6603] hci_conn_init_sysfs: conn ffff880079f03000
[14898.739440] [6603] hci_send_cmd: hci0 opcode 0x200d plen 25
[14898.739443] [6603] hci_send_cmd: skb len 28
[14898.739487] [6603] hci_chan_create: hci0 conn ffff880079f03000
...
[14938.860231] [55] hci_send_cmd: hci0 opcode 0x200e plen 0
...
[14938.876427] [55] hci_le_conn_complete_evt: hci0 status 2
[14938.876433] [55] hci_conn_add: hci0 dst 00:00:00:00:00:00
[14938.876439] [55] hci_conn_init_sysfs: conn ffff88007aeff800
[14938.876454] [55] hci_send_to_control: len 14
[14938.876470] [55] l2cap_connect_cfm: hcon ffff88007aeff800 bdaddr 00:00:00:00:00:00 status 2
[14938.876474] [55] hci_conn_del: hci0 conn ffff88007aeff800 handle 0
Signed-off-by: NAndrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
Acked-by: NAndre Guedes <andre.guedes@openbossa.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

MGMT_STATUS_BUSY should be returned when LE pairing cannot be started due
to another outgoing connection attempt is ongoing.
Signed-off-by: NAndrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Only one outgoing LE connection attempt should be possible.
hci_connect() will now return -EBUSY in case there's another pending
outgoing connection.
Signed-off-by: NAndrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Trivial fix, let the code cleaner.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NMat Martineau <mathewm@codeaurora.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

Simplify the handling of different ERTM header size. We were the same
check in some places of the code, and more is expected to come, so just
replace them with a function.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Acked-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

l2cap_att_channel always returns 0 which is not used.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

l2cap_conless_channel always return 0 which is not used.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

l2cap_data_channel always return 0 which is not used anywhere,
make it void function.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Make A2MP channel special channel which do not reference hci_conn.
This prevents from keeping ACL connection open when all L2CAP
channels got closed.

hci_conn_hold and hci_conn_put are not reference counts on the
hci_conn structure in the typical way.  They are reference counts for
the ACL.  When you do the last hci_conn_put, the ACL is disconnected
after a timeout.
Reported-by: NMat Martineau <mathewm@codeaurora.org>
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Functions will be always defined and in case not implemented as
dummy __no_func.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Those are not used anywhere in code (and never were since introduction
in 2006) so just remove them.
Signed-off-by: NSzymon Janc <szymon.janc@tieto.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Handle incoming A2MP connection by creating AMP manager and
processing A2MP messages.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

A2MP fixed channel do not have sk
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Process A2MP responses, print cmd code and ident for now.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Placeholder for A2MP Disconnect Physlink Request.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Placeholder for A2MP Create Physlink Request.
Handles requests with invalid controler id as shown below:

...
> ACL data: handle 11 flags 0x02 dlen 50
    A2MP: Create Physical Link req: local id 1 remote id 85
      Assoc data:
        <skipped>
< ACL data: handle 11 flags 0x00 dlen 15
    A2MP: Create Physical Link rsp: local id 85 remote id 1 status 1
      Invalid Controller ID
...
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Example trace when receiving AMP Assoc Request with wrong AMP id.
...
> ACL data: handle 11 flags 0x02 dlen 13
    A2MP: Get AMP Assoc req: id 238
< ACL data: handle 11 flags 0x00 dlen 14
    A2MP: Get AMP Assoc rsp: id 238 status (1) Invalid Controller ID
      assoc data:
...
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Process A2MP Get Info Request.
Example of trace log for invalid controller id is shown below:

...
> ACL data: handle 11 flags 0x02 dlen 13
    A2MP: Get Info req: id 238
< ACL data: handle 11 flags 0x00 dlen 30
    A2MP: Get Info rsp: id 238 status (1) Invalid Controller ID
...

Note that If the Status field is set to Invalid Controller ID all subsequent
fields in the AMP Get Info Response shall be ignored by the receiver.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Placeholder for A2MP Change Notify handler.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Adds helper functions to count HCI devs and process A2MP Discover
Request, code makes sure that first controller in the list is
BREDR one. Trace is shown below:

...
> ACL data: handle 11 flags 0x02 dlen 16
    A2MP: Discover req: mtu/mps 670 mask: 0x0000
< ACL data: handle 11 flags 0x00 dlen 22
    A2MP: Discover rsp: mtu/mps 670 mask: 0x0000
      Controller list:
        id 0 type 0 (BR-EDR) status 0x01 (Bluetooth only)
        id 1 type 1 (802.11 AMP) status 0x01 (Bluetooth only)
...
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Placeholder for future A2MP Command Reject handler.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Implement basic processing for AMP Manager Protocol (A2MP).

Example below shows processing unrecognized command.
...
> ACL data: handle 11 flags 0x02 dlen 12
    A2MP: code 0x00 ident 3 len 0
< ACL data: handle 11 flags 0x00 dlen 14
    A2MP: Command Reject: reason (0) - Command not recognized
...
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

A2MP status codes copied from Bluez patch sent by Peter Krystad
<pkrystad@codeaurora.org>.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Define A2MP command IDs and packet structures.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Add L2CAP chan ops callbacks.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Helper function to build and send A2MP messages.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Define AMP Manager and some basic functions.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Create and initialize fixed A2MP channel
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Move this check to before the channel time creation simplifies the code
and avoid memory allocation if the channel already exist.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Acked-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Remove socket specific code from l2cap_core.c
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Acked-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

These vars are kept in sync so we can use chan->state here.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This move socket specific code to l2cap_sock.c.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This remove a bit more of socket code from l2cap core, this calls set the
SOCK_ZAPPED and do some clean up depending on the socket state.
Reported-by: NMat Martineau <mathewm@codeaurora.org>
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Use chan instead of void * makes more sense here.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Commit fc50744c ("Bluetooth: Fix registering hci with duplicate name") didn't
fully fix the duplicate naming issue with devices, and duplicate device names
could still be created:

[  142.484097] device: 'hci1': device_add
[...]
[  150.545263] device: 'hci1': device_add
[  150.550128] kobject: 'hci1' (ffff880014cc4e58): kobject_add_internal: parent: 'bluetooth', set: 'devices'
[  150.558979] ------------[ cut here ]------------
[  150.561438] WARNING: at fs/sysfs/dir.c:529 sysfs_add_one+0xb0/0xd0()
[  150.572974] Hardware name: Bochs
[  150.580502] sysfs: cannot create duplicate filename '/devices/virtual/bluetooth/hci1'
[  150.584444] Pid: 7563, comm: trinity-child1 Tainted: G        W    3.4.0-next-20120524-sasha #296
[...]

Instead of the weird logic and the attempt at keeping the device list sorted,
just use an IDA.
Signed-off-by: NSasha Levin <levinsasha928@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This replace code in l2cap_le_conn_ready() by a similar code in
l2cap_chan_ready().
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This is already performed inside l2cap_chan_ready(), so we don't need it
here again.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Acked-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>