Currently we set the bio size to the byte equivalent of the blocks to
be trimmed when submitting the initial DISCARD ioctl.  That means it
is subject to the max_hw_sectors limitation of the HBA which is
much lower than the size of a DISCARD request we can support.
Add a separate max_discard_sectors tunable to limit the size for discard
requests.

We limit the max discard request size in bytes to 32bit as that is the
limit for bio->bi_size.  This could be much larger if we had a way to pass
that information through the block layer.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

prepare_discard_fn() was being called in a place where memory allocation
was effectively impossible.  This makes it inappropriate for all but
the most trivial translations of Linux's DISCARD operation to the block
command set.  Additionally adding a payload there makes the ownership
of the bio backing unclear as it's now allocated by the device driver
and not the submitter as usual.

It is replaced with QUEUE_FLAG_DISCARD which is used to indicate whether
the queue supports discard operations or not.  blkdev_issue_discard now
allocates a one-page, sector-length payload which is the right thing
for the common ATA and SCSI implementations.

The mtd implementation of prepare_discard_fn() is replaced with simply
checking for the request being a discard.

Largely based on a previous patch from Matthew Wilcox <matthew@wil.cx>
which did the prepare_discard_fn but not the different payload allocation
yet.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Currently, there is a single in_flight counter measuring the number of
requests in the request_queue. But some monitoring tools would like to
know how many read requests and write requests are in progress. Split the
current in_flight counter into two seperate counters for read and write.

This information is exported as a sysfs attribute, as changing the
currently available stat files would break the existing tools.
Signed-off-by: NNikanth Karthikesan <knikanth@suse.de>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

If BIO is discarded or cross over end of device,
BIO queueing trial doesn't occur.

Actually the trace was called just before make_request at first:
[PATCH] Block queue IO tracing support (blktrace) as of 2006-03-23
      2056a782

And then 2 patches added some checks between them:
[PATCH] md: check bio address after mapping through partitions
        5ddfe969,
[BLOCK] Don't allow empty barriers to be passed down to
queues that don't grok them
        51fd77bd

It breaks original goal.
Let's trace it only when it happens.
Signed-off-by: NMinchan Kim <minchan.kim@gmail.com>
Acked-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Instead of just checking whether this device uses block layer
tagging, we can improve the detection by looking at the maximum
queue depth it has reached. If that crosses 4, then deem it a
queuing device.

This is important on high IOPS devices, since plugging hurts
the performance there (it can be as much as 10-15% of the sys
time).
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Get rid of any functions that test for these bits and make callers
use bio_rw_flagged() directly. Then it is at least directly apparent
what variable and flag they check.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Failfast has characteristics from other attributes.  When issuing,
executing and successuflly completing requests, failfast doesn't make
any difference.  It only affects how a request is handled on failure.
Allowing requests with different failfast settings to be merged cause
normal IOs to fail prematurely while not allowing has performance
penalties as failfast is used for read aheads which are likely to be
located near in-flight or to-be-issued normal IOs.

This patch introduces the concept of 'mixed merge'.  A request is a
mixed merge if it is merge of segments which require different
handling on failure.  Currently the only mixable attributes are
failfast ones (or lack thereof).

When a bio with different failfast settings is added to an existing
request or requests of different failfast settings are merged, the
merged request is marked mixed.  Each bio carries failfast settings
and the request always tracks failfast state of the first bio.  When
the request fails, blk_rq_err_bytes() can be used to determine how
many bytes can be safely failed without crossing into an area which
requires further retrials.

This allows request merging regardless of failfast settings while
keeping the failure handling correct.

This patch only implements mixed merge but doesn't enable it.  The
next one will update SCSI to make use of mixed merge.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Niel Lambrechts <niel.lambrechts@gmail.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

bio and request use the same set of failfast bits.  This patch makes
the following changes to simplify things.

* enumify BIO_RW* bits and reorder bits such that BIOS_RW_FAILFAST_*
  bits coincide with __REQ_FAILFAST_* bits.

* The above pushes BIO_RW_AHEAD out of sync with __REQ_FAILFAST_DEV
  but the matching is useless anyway.  init_request_from_bio() is
  responsible for setting FAILFAST bits on FS requests and non-FS
  requests never use BIO_RW_AHEAD.  Drop the code and comment from
  blk_rq_bio_prep().

* Define REQ_FAILFAST_MASK which is OR of all FAILFAST bits and
  simplify FAILFAST flags handling in init_request_from_bio().
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

This enables us to track who does what and print info. Its main use
is catching dirty inodes on the default_backing_dev_info, so we can
fix that up.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Prior to the change for more sane end_io functions, we exported
the helpers with the normal EXPORT_SYMBOL(). That got changed
to _GPL() for the new interface. Revert that particular change,
on the basis that this is basic functionality and doesn't dip
into internal structures. If these exports can't be non-GPL,
then we may as well make EXPORT_SYMBOL() imply GPL for
everything.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Move the assignment of a default lock below blk_init_queue() to
blk_queue_make_request(), so we also get to set the default lock
for ->make_request_fn() based drivers. This is important since the
queue flag locking requires a lock to be in place.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

The next_ordered flag is only meaningful for devices that use __make_request.
So move the test against next_ordered out of generic code and in to
__make_request

Since this test was added, barriers have not worked on md or any
devices that don't use __make_request and so don't bother to set
next_ordered.  (dm explicitly sets something other than
QUEUE_ORDERED_NONE since
  commit 99360b4c
but notes in the comments that it is otherwise meaningless).

Cc: Ken Milmore <ken.milmore@googlemail.com>
Cc: stable@kernel.org
Signed-off-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

The initial patches to support this through sysfs export were broken
and have been if 0'ed out in any release. So lets just kill the code
and reclaim some space in struct request_queue, if anyone would later
like to fixup the sysfs bits, the git history can easily restore
the removed bits.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

This patch restores stacking ability to the block layer integrity
infrastructure by creating a set of dedicated bip slabs.  Each bip slab
has an embedded bio_vec array at the end.  This cuts down on memory
allocations and also simplifies the code compared to the original bvec
version.  Only the largest bip slab is backed by a mempool.  The pool is
contained in the bio_set so stacking drivers can ensure forward
progress.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <axboe@carl.(none)>

When porting blktrace to tracepoints, we changed to trace/block.h
for trace prober declarations.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Move the defaults to where we do the init of the backing_dev_info.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Fix kernel-doc warnings in recently changed block/ source code.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds the following 2 interfaces for request-stacking drivers:

  - blk_rq_prep_clone(struct request *clone, struct request *orig,
		      struct bio_set *bs, gfp_t gfp_mask,
		      int (*bio_ctr)(struct bio *, struct bio*, void *),
		      void *data)
      * Clones bios in the original request to the clone request
        (bio_ctr is called for each cloned bios.)
      * Copies attributes of the original request to the clone request.
        The actual data parts (e.g. ->cmd, ->buffer, ->sense) are not
        copied.

  - blk_rq_unprep_clone(struct request *clone)
      * Frees cloned bios from the clone request.

Request stacking drivers (e.g. request-based dm) need to make a clone
request for a submitted request and dispatch it to other devices.

To allocate request for the clone, request stacking drivers may not
be able to use blk_get_request() because the allocation may be done
in an irq-disabled context.
So blk_rq_prep_clone() takes a request allocated by the caller
as an argument.

For each clone bio in the clone request, request stacking drivers
should be able to set up their own completion handler.
So blk_rq_prep_clone() takes a callback function which is called
for each clone bio, and a pointer for private data which is passed
to the callback.

NOTE:
blk_rq_prep_clone() doesn't copy any actual data of the original
request.  Pages are shared between original bios and cloned bios.
So caller must not complete the original request before the clone
request.
Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

TRACE_EVENT is a more generic way to define tracepoints. Doing so adds
these new capabilities to this tracepoint:

  - zero-copy and per-cpu splice() tracing
  - binary tracing without printf overhead
  - structured logging records exposed under /debug/tracing/events
  - trace events embedded in function tracer output and other plugins
  - user-defined, per tracepoint filter expressions
  ...

Cons:

  - no dev_t info for the output of plug, unplug_timer and unplug_io events.
    no dev_t info for getrq and sleeprq events if bio == NULL.
    no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL.

    This is mainly because we can't get the deivce from a request queue.
    But this may change in the future.

  - A packet command is converted to a string in TP_assign, not TP_print.
    While blktrace do the convertion just before output.

    Since pc requests should be rather rare, this is not a big issue.

  - In blktrace, an event can have 2 different print formats, but a TRACE_EVENT
    has a unique format, which means we have some unused data in a trace entry.

    The overhead is minimized by using __dynamic_array() instead of __array().

I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing:

      dd                   dd + ioctl blktrace       dd + TRACE_EVENT (splice)
1     7.36s, 42.7 MB/s     7.50s, 42.0 MB/s          7.41s, 42.5 MB/s
2     7.43s, 42.3 MB/s     7.48s, 42.1 MB/s          7.43s, 42.4 MB/s
3     7.38s, 42.6 MB/s     7.45s, 42.2 MB/s          7.41s, 42.5 MB/s

So the overhead of tracing is very small, and no regression when using
those trace events vs blktrace.

And the binary output of TRACE_EVENT is much smaller than blktrace:

 # ls -l -h
 -rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0
 -rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1
 -rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out

Following are some comparisons between TRACE_EVENT and blktrace:

plug:
  kjournald-480   [000]   303.084981: block_plug: [kjournald]
  kjournald-480   [000]   303.084981:   8,0    P   N [kjournald]

unplug_io:
  kblockd/0-118   [000]   300.052973: block_unplug_io: [kblockd/0] 1
  kblockd/0-118   [000]   300.052974:   8,0    U   N [kblockd/0] 1

remap:
  kjournald-480   [000]   303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384
  kjournald-480   [000]   303.085043:   8,0    A   W 102736992 + 8 <- (8,8) 33384

bio_backmerge:
  kjournald-480   [000]   303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald]
  kjournald-480   [000]   303.085086:   8,0    M   W 102737032 + 8 [kjournald]

getrq:
  kjournald-480   [000]   303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald]
  kjournald-480   [000]   303.084975:   8,0    G   W 102736984 + 8 [kjournald]

  bash-2066  [001]  1072.953770:   8,0    G   N [bash]
  bash-2066  [001]  1072.953773: block_getrq: 0,0 N 0 + 0 [bash]

rq_complete:
  konsole-2065  [001]   300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0]
  konsole-2065  [001]   300.053191:   8,0    C   W 103669040 + 16 [0]

  ksoftirqd/1-7   [001]  1072.953811:   8,0    C   N (5a 00 08 00 00 00 00 00 24 00) [0]
  ksoftirqd/1-7   [001]  1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0]

rq_insert:
  kjournald-480   [000]   303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald]
  kjournald-480   [000]   303.084986:   8,0    I   W 102736984 + 8 [kjournald]

Changelog from v2 -> v3:

- use the newly introduced __dynamic_array().

Changelog from v1 -> v2:

- use __string() instead of __array() to minimize the memory required
  to store hex dump of rq->cmd().

- support large pc requests.

- add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT.

- some cleanups.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A2DF669.5070905@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Tejun's "block: set rq->resid_len to blk_rq_bytes() on issue" patch
seems to be incomplete; It doesn't set rq->resid_len to blk_rq_bytes()
for a bidi request (req->next_rq). As a result, all bidi users are
broken.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Doing a bit of torture testing, I ran across a BUG in the block
subsystem (at blk-core.c:2048): the test for if the request is queued.

It turns out the trigger was a BLKPREP_KILL coming out of the SCSI prep
function.  Currently for BLKPREP_KILL requests, we send them straight
into __blk_end_request_all() with an error, but they've never been
dequeued, so they trip the bug.  Fix this by starting requests before
killing them.
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

commit e8939a50466fd963eb1ba9118c34b9ffb7ff6aa6
Author: Tejun Heo <tj@kernel.org>
Date:   Fri May 8 11:54:16 2009 +0900

    block: implement and enforce request peek/start/fetch

Added a BUG_ON(blk_queued_rq(req)) to the top of blk_finish_req().
Unfortunately, this checks whether req->queuelist is empty.  This list
is doing double duty both as the queue list and the tag list, so tagged
requests come in here with this not empty and boom (the tag list is
emptied by blk_queue_end_tag() lower down).

Fix this by moving the BUG_ON to below the end tag we also seem
vulnerable to this in blk_requeue_request() as well.  I think all uses
of blk_queued_rq() need auditing because the check is clearly wrong in
the tagged case.
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Convert all external users of queue limits to using wrapper functions
instead of poking the request queue variables directly.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Make them fully share the tag space, but disallow async requests using
the last any two slots.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Add a note about how one needs to be careful when setting up these bio
chains.

Extracted from Boaz's updated patch.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

New block API:
given a struct bio allocates a new request. This is the parallel of
generic_make_request for BLOCK_PC commands users.

The passed bio may be a chained-bio. The bio is bounced if needed
inside the call to this member.

This is in the effort of un-exporting blk_rq_append_bio().
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
CC: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

In commit c3a4d78c, while introducing
rq->resid_len, the default value of residue count was changed from
full count to zero.  The conversion was done under the assumption that
when a request fails residue count wasn't defined.  However, Boaz and
James pointed out that this wasn't true and the residue count should
be preserved for failed requests too.

This patchset restores the original behavior by setting rq->resid_len
to blk_rq_bytes(rq) on request start and restoring explicit clearing
in affected drivers.  While at it, take advantage of the fact that
rq->resid_len is set to full count where applicable.

* ide-cd: rq->resid_len cleared on pc success

* mptsas: req->resid_len cleared on success

* sas_expander: rsp/req->resid_len cleared on success

* mpt2sas_transport: req->resid_len cleared on success

* ide-cd, ide-tape, mptsas, sas_host_smp, mpt2sas_transport, ub: take
  advantage of initial full count to simplify code

Boaz Harrosh spotted bug in resid_len initialization.  Fixed as
suggested.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NBorislav Petkov <petkovbb@googlemail.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Current bio_vec array index out-of-bounds test within
__end_that_request_first() does not seem correct.
It checks bio->bi_idx against bio->bi_vcnt, but the subsequent code
uses idx (which is, bio->bi_idx + next_idx) as the array index into
bio_vec array. This means that the test really make sense only at
the first iteration of !(nr_bytes >=bio->bi_size) case (when next_idx
== zero). Fix this by replacing bio->bi_idx with idx.
(This patch applies to 2.6.30-rc4.)
Signed-off-by: NKazuhisa Ichikawa <ki@epsilou.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Let's put the completion related functions back to block/blk-core.c
where they have lived. We can also unexport blk_end_bidi_request() and
__blk_end_bidi_request(), which nobody uses.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Till now block layer allowed two separate modes of request execution.
A request is always acquired from the request queue via
elv_next_request().  After that, drivers are free to either dequeue it
or process it without dequeueing.  Dequeue allows elv_next_request()
to return the next request so that multiple requests can be in flight.

Executing requests without dequeueing has its merits mostly in
allowing drivers for simpler devices which can't do sg to deal with
segments only without considering request boundary.  However, the
benefit this brings is dubious and declining while the cost of the API
ambiguity is increasing.  Segment based drivers are usually for very
old or limited devices and as converting to dequeueing model isn't
difficult, it doesn't justify the API overhead it puts on block layer
and its more modern users.

Previous patches converted all block low level drivers to dequeueing
model.  This patch completes the API transition by...

* renaming elv_next_request() to blk_peek_request()

* renaming blkdev_dequeue_request() to blk_start_request()

* adding blk_fetch_request() which is combination of peek and start

* disallowing completion of queued (not started) requests

* applying new API to all LLDs

Renamings are for consistency and to break out of tree code so that
it's apparent that out of tree drivers need updating.

[ Impact: block request issue API cleanup, no functional change ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: unsik Kim <donari75@gmail.com>
Cc: Paul Clements <paul.clements@steeleye.com>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Laurent Vivier <Laurent@lvivier.info>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: Pierre Ossman <drzeus@drzeus.cx>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: Stefan Weinhuber <wein@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Block low level drivers for some reason have been pretty good at
abusing block layer API.  Especially struct request's fields tend to
get violated in all possible ways.  Make it clear that low level
drivers MUST NOT access or manipulate rq->sector and rq->data_len
directly by prefixing them with double underscores.

This change is also necessary to break build of out-of-tree codes
which assume the previous block API where internal fields can be
manipulated and rq->data_len carries residual count on completion.

[ Impact: hide internal fields, block API change ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

struct request has had a few different ways to represent some
properties of a request.  ->hard_* represent block layer's view of the
request progress (completion cursor) and the ones without the prefix
are supposed to represent the issue cursor and allowed to be updated
as necessary by the low level drivers.  The thing is that as block
layer supports partial completion, the two cursors really aren't
necessary and only cause confusion.  In addition, manual management of
request detail from low level drivers is cumbersome and error-prone at
the very least.

Another interesting duplicate fields are rq->[hard_]nr_sectors and
rq->{hard_cur|current}_nr_sectors against rq->data_len and
rq->bio->bi_size.  This is more convoluted than the hard_ case.

rq->[hard_]nr_sectors are initialized for requests with bio but
blk_rq_bytes() uses it only for !pc requests.  rq->data_len is
initialized for all request but blk_rq_bytes() uses it only for pc
requests.  This causes good amount of confusion throughout block layer
and its drivers and determining the request length has been a bit of
black magic which may or may not work depending on circumstances and
what the specific LLD is actually doing.

rq->{hard_cur|current}_nr_sectors represent the number of sectors in
the contiguous data area at the front.  This is mainly used by drivers
which transfers data by walking request segment-by-segment.  This
value always equals rq->bio->bi_size >> 9.  However, data length for
pc requests may not be multiple of 512 bytes and using this field
becomes a bit confusing.

In general, having multiple fields to represent the same property
leads only to confusion and subtle bugs.  With recent block low level
driver cleanups, no driver is accessing or manipulating these
duplicate fields directly.  Drop all the duplicates.  Now rq->sector
means the current sector, rq->data_len the current total length and
rq->bio->bi_size the current segment length.  Everything else is
defined in terms of these three and available only through accessors.

* blk_recalc_rq_sectors() is collapsed into blk_update_request() and
  now handles pc and fs requests equally other than rq->sector update.
  This means that now pc requests can use partial completion too (no
  in-kernel user yet tho).

* bio_cur_sectors() is replaced with bio_cur_bytes() as block layer
  now uses byte count as the primary data length.

* blk_rq_pos() is now guranteed to be always correct.  In-block users
  converted.

* blk_rq_bytes() is now guaranteed to be always valid as is
  blk_rq_sectors().  In-block users converted.

* blk_rq_sectors() is now guaranteed to equal blk_rq_bytes() >> 9.
  More convenient one is used.

* blk_rq_bytes() and blk_rq_cur_bytes() are now inlined and take const
  pointer to request.

[ Impact: API cleanup, single way to represent one property of a request ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

With recent cleanups, there is no place where low level driver
directly manipulates request fields.  This means that the 'hard'
request fields always equal the !hard fields.  Convert all
rq->sectors, nr_sectors and current_nr_sectors references to
accessors.

While at it, drop superflous blk_rq_pos() < 0 test in swim.c.

[ Impact: use pos and nr_sectors accessors ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Tested-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Tested-by: NAdrian McMenamin <adrian@mcmen.demon.co.uk>
Acked-by: NAdrian McMenamin <adrian@mcmen.demon.co.uk>
Acked-by: NMike Miller <mike.miller@hp.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Paul Clements <paul.clements@steeleye.com>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Dario Ballabio <ballabio_dario@emc.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: unsik Kim <donari75@gmail.com>
Cc: Laurent Vivier <Laurent@lvivier.info>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Implement accessors - blk_rq_pos(), blk_rq_sectors() and
blk_rq_cur_sectors() which return rq->hard_sector, rq->hard_nr_sectors
and rq->hard_cur_sectors respectively and convert direct references of
the said fields to the accessors.

This is in preparation of request data length handling cleanup.

Geert	: suggested adding const to struct request * parameter to accessors
Sergei	: spotted error in patch description

[ Impact: cleanup ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: NStephen Rothwell <sfr@canb.auug.org.au>
Tested-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Ackec-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Remove redundant from-sector parameter: it's /always/ the bio's sector
passed in.

[ Impact: cleanup ]
Signed-off-by: NAlan D. Brunelle <alan.brunelle@hp.com>
Reviewed-by: NLi Zefan <lizf@cn.fujitsu.com>
Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <49FF517C.7000503@hp.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NNikanth Karthikesan <knikanth@suse.de>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

We currently check for file system requests outside of blk_do_io_stat(rq),
but we may as well just include it.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Now that all block request data transfer is done via bio, rq->data
isn't used.  Kill it.

While at it, make the roles of rq->special and buffer clear.

[ Impact: drop now unncessary field from struct request ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Boaz Harrosh <bharrosh@panasas.com>

There are many [__]blk_end_request() call sites which call it with
full request length and expect full completion.  Many of them ensure
that the request actually completes by doing BUG_ON() the return
value, which is awkward and error-prone.

This patch adds [__]blk_end_request_all() which takes @rq and @error
and fully completes the request.  BUG_ON() is added to to ensure that
this actually happens.

Most conversions are simple but there are a few noteworthy ones.

* cdrom/viocd: viocd_end_request() replaced with direct calls to
  __blk_end_request_all().

* s390/block/dasd: dasd_end_request() replaced with direct calls to
  __blk_end_request_all().

* s390/char/tape_block: tapeblock_end_request() replaced with direct
  calls to blk_end_request_all().

[ Impact: cleanup ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>

rq->start_time was initialized in init_request_from_bio() so special
requests didn't have start_time set.  This has been okay as start_time
has been used only for fs requests; however, there is no indication of
this actually is the case or not.  Set rq->start_time in blk_rq_init()
and guarantee that all initialized rq's have its start_time set.  This
improves consistency at virtually no cost and future changes will make
use of the timestamp for !bio requests.

[ Impact: rq->start_time is valid for all requests ]
Signed-off-by: NTejun Heo <tj@kernel.org>