- 03 9月, 2014 2 次提交
-
-
由 Olli Salonen 提交于
Same thing for si2157 as Antti did earlier for tda18212: There is no need to print module name nor function name as those are done by kernel logging system when dev_xxx logging is used and driver is proper I2C driver. While here, fix a typo ("unknown") in si2157_init. Signed-off-by: NOlli Salonen <olli.salonen@iki.fi> Reviewed-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Olli Salonen 提交于
Same thing for si2168 as Antti did earlier for tda18212: There is no need to print module name nor function name as those are done by kernel logging system when dev_xxx logging is used and driver is proper I2C driver. Signed-off-by: NOlli Salonen <olli.salonen@iki.fi> Reviewed-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
- 02 9月, 2014 3 次提交
-
-
由 Changbing Xiong 提交于
when usb-type tuner is pulled out, user applications did not close device's FD, and go on polling the device, we should return POLLERR directly. Signed-off-by: NChangbing Xiong <cb.xiong@samsung.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Changbing Xiong 提交于
Data type of return value is unsigned int, but in function of dvb_demux_poll, when the pointer of dmxdevfilter equals NULL, it will return -EINVAL, which is invalid. Signed-off-by: NChangbing Xiong <cb.xiong@samsung.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Changbing Xiong 提交于
Normally, ADAP_STREAMING bit is set in dvb_usb_start_feed and cleared in dvb_usb_stop_feed. But in exceptional cases, for example, when the tv is playing programs and the tuner is pulled out, then dvb_usbv2_disconnect is called. In such case, it will first call dvb_usbv2_adapter_frontend_exit to stop dvb_frontend_thread, and then call dvb_usbv2_adapter_dvb_exit to clear ADAP_STREAMING bit. At this point, if dvb_frontend_thread is sleeping and waiting for ADAP_STREAMING to be cleared to get out of sleep. then dvb_frontend_thread can never be stoped, because clearing ADAP_STREAMING bit is performed after dvb_frontend_thread is stopped (i.e. performed in dvb_usbv2_adapter_dvb_exit). So, deadlock: [ 240.822037] INFO: task khubd:497 blocked for more than 120 seconds. [ 240.822655] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 240.830493] khubd D c0013b3c 0 497 2 0x00000000 [ 240.836996] [<c0013b3c>] (__schedule+0x200/0x54c) from [<c00110f4>] (schedule_timeout+0x14c/0x19c) [ 240.845940] [<c00110f4>] (schedule_timeout+0x14c/0x19c) from [<c00137f4>] (wait_for_common+0xac/0x150) [ 240.855234] [<c00137f4>] (wait_for_common+0xac/0x150) from [<c004989c>] (kthread_stop+0x58/0x90) [ 240.864004] [<c004989c>] (kthread_stop+0x58/0x90) from [<c03b2ebc>] (dvb_frontend_stop+0x3c/0x9c) [ 240.872849] [<c03b2ebc>] (dvb_frontend_stop+0x3c/0x9c) from [<c03b2f3c>] (dvb_unregister_frontend+0x20/0xd8) [ 240.882666] [<c03b2f3c>] (dvb_unregister_frontend+0x20/0xd8) from [<c03ed938>] (dvb_usbv2_exit+0x68/0xfc) [ 240.892204] [<c03ed938>] (dvb_usbv2_exit+0x68/0xfc) from [<c03eda18>] (dvb_usbv2_disconnect+0x4c/0x70) [ 240.901499] [<c03eda18>] (dvb_usbv2_disconnect+0x4c/0x70) from [<c031c050>] (usb_unbind_interface+0x58/0x188) [ 240.911395] [<c031c050>] (usb_unbind_interface+0x58/0x188) from [<c02c3e78>] (__device_release_driver+0x74/0xd0) [ 240.921544] [<c02c3e78>] (__device_release_driver+0x74/0xd0) from [<c02c3ef0>] (device_release_driver+0x1c/0x28) [ 240.931697] [<c02c3ef0>] (device_release_driver+0x1c/0x28) from [<c02c39b8>] (bus_remove_device+0xc4/0xe4) [ 240.941332] [<c02c39b8>] (bus_remove_device+0xc4/0xe4) from [<c02c1344>] (device_del+0xf4/0x178) [ 240.950106] [<c02c1344>] (device_del+0xf4/0x178) from [<c0319eb0>] (usb_disable_device+0xa0/0x1c8) [ 240.959040] [<c0319eb0>] (usb_disable_device+0xa0/0x1c8) from [<c03128b4>] (usb_disconnect+0x88/0x188) [ 240.968326] [<c03128b4>] (usb_disconnect+0x88/0x188) from [<c0313edc>] (hub_thread+0x4d0/0x1200) [ 240.977100] [<c0313edc>] (hub_thread+0x4d0/0x1200) from [<c0049690>] (kthread+0xa4/0xb0) [ 240.985174] [<c0049690>] (kthread+0xa4/0xb0) from [<c0009118>] (ret_from_fork+0x14/0x3c) [ 240.993259] INFO: task kdvb-ad-0-fe-0:3256 blocked for more than 120 seconds. [ 241.000349] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 241.008162] kdvb-ad-0-fe-0 D c0013b3c 0 3256 2 0x00000000 [ 241.014507] [<c0013b3c>] (__schedule+0x200/0x54c) from [<c03eda44>] (wait_schedule+0x8/0x10) [ 241.022924] [<c03eda44>] (wait_schedule+0x8/0x10) from [<c001120c>] (__wait_on_bit+0x74/0xb8) [ 241.031434] [<c001120c>] (__wait_on_bit+0x74/0xb8) from [<c00112b8>] (out_of_line_wait_on_bit+0x68/0x70) [ 241.040902] [<c00112b8>] (out_of_line_wait_on_bit+0x68/0x70) from [<c03e5e88>] (dvb_usb_fe_sleep+0xf4/0xfc) [ 241.050618] [<c03e5e88>] (dvb_usb_fe_sleep+0xf4/0xfc) from [<c03b4b74>] (dvb_frontend_thread+0x124/0x4e8) [ 241.060164] [<c03b4b74>] (dvb_frontend_thread+0x124/0x4e8) from [<c0049690>] (kthread+0xa4/0xb0) [ 241.068929] [<c0049690>] (kthread+0xa4/0xb0) from [<c0009118>] (ret_from_fork+0x14/0x3c) Fix it by calling dvb_usbv2_adapter_frontend_exit() latter. Test enviroment: odroidx2 + Hauppauge(WinTV-Aero-M) Signed-off-by: NChangbing Xiong <cb.xiong@samsung.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
- 27 8月, 2014 35 次提交
-
-
由 Mauro Carvalho Chehab 提交于
COMPILE_TEST fail on (some) archs without MMU. Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Mauro Carvalho Chehab 提交于
vb2-dma-contig depends on HAS_DMA, but the Kbuild doesn't take it into account at select. Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Mauro Carvalho Chehab 提交于
There are several arch-specific media drivers that don't require asm-specific includes and can be successfully compiled on x86. Add COMPILE_TEST dependency for them, in order to allow a broader test on those drivers. That helps static analysis tools like Coverity to discover eventual troubles there. Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Mauro Carvalho Chehab 提交于
We don't need anything special to enable COMPILE_TEST for this driver. Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Mauro Carvalho Chehab 提交于
That helps some static checks, so enable it. While there, it was noticed that linux/sizes.h was missing: drivers/media/platform/exynos4-is/mipi-csis.c: In function ‘s5pcsis_s_rx_buffer’: drivers/media/platform/exynos4-is/mipi-csis.c:114:31: error: ‘SZ_4K’ undeclared (first use in this function) #define S5PCSIS_PKTDATA_SIZE SZ_4K ^ Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Mauro Carvalho Chehab 提交于
Allowing COMPILE_TEST here is trivial, but there's one missing header to be added: drivers/media/platform/ti-vpe/vpe.c: In function ‘vpe_probe’: drivers/media/platform/ti-vpe/vpe.c:2266:56: error: ‘SZ_32K’ undeclared (first use in this function) dev->base = devm_ioremap(&pdev->dev, dev->res->start, SZ_32K); ^ Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Mauro Carvalho Chehab 提交于
By allowing compilation on all archs, we can use static analysis tools to test this driver. In order to do that, replace asm/sizes.h by its generic name (linux/sizes.h), with should keep doing the right thing. Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Mauro Carvalho Chehab 提交于
This patch readded a call to iss_put_clocks(), with was removed by changeset 1153be56, causing a compilation breakage. This reverts commit d4b32646.
-
由 Mauro Carvalho Chehab 提交于
drivers/media/platform/s5p-jpeg/jpeg-hw-s5p.c: In function 's5p_jpeg_clear_int': drivers/media/platform/s5p-jpeg/jpeg-hw-s5p.c:327:16: warning: variable 'reg' set but not used [-Wunused-but-set-variable] unsigned long reg; ^ Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Mauro Carvalho Chehab 提交于
drivers/media/platform/soc_camera/atmel-isi.c: In function 'start_streaming': drivers/media/platform/soc_camera/atmel-isi.c:387:6: warning: variable 'sr' set but not used [-Wunused-but-set-variable] u32 sr = 0; ^ Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Mauro Carvalho Chehab 提交于
drivers/media/platform/soc_camera/mx2_camera.c: In function 'mx27_camera_emma_prp_reset': drivers/media/platform/soc_camera/mx2_camera.c:812:6: warning: variable 'cntl' set but not used [-Wunused-but-set-variable] u32 cntl; ^ Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Mauro Carvalho Chehab 提交于
drivers/media/platform/exynos4-is/media-dev.c: In function 'fimc_md_link_notify': drivers/media/platform/exynos4-is/media-dev.c:1102:4: warning: suggest braces around empty body in an 'else' statement [-Wempty-body] ; /* TODO: Link state change validation */ ^ Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Mauro Carvalho Chehab 提交于
drivers/media/platform/exynos4-is/mipi-csis.c: In function 's5pcsis_parse_dt': drivers/media/platform/exynos4-is/mipi-csis.c:756:2: warning: comparison is always false due to limited range of data type [-Wtype-limits] if (state->index < 0 || state->index >= CSIS_MAX_ENTITIES) ^ Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Mauro Carvalho Chehab 提交于
drivers/media/platform/s5p-mfc/s5p_mfc_dec.c:826:5: warning: no previous prototype for 'vidioc_decoder_cmd' [-Wmissing-prototypes] int vidioc_decoder_cmd(struct file *file, void *priv, ^ drivers/media/platform/s5p-mfc/s5p_mfc.c: In function 's5p_mfc_runtime_resume': drivers/media/platform/s5p-mfc/s5p_mfc.c:1314:6: warning: variable 'pre_power' set but not used [-Wunused-but-set-variable] int pre_power; ^ drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v5.c:163:25: warning: no previous prototype for 's5p_mfc_init_hw_cmds_v5' [-Wmissing-prototypes] struct s5p_mfc_hw_cmds *s5p_mfc_init_hw_cmds_v5(void) ^ drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v6.c:156:25: warning: no previous prototype for 's5p_mfc_init_hw_cmds_v6' [-Wmissing-prototypes] struct s5p_mfc_hw_cmds *s5p_mfc_init_hw_cmds_v6(void) ^ drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c: In function 's5p_mfc_run_dec_frame': drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c:1189:15: warning: variable 'index' set but not used [-Wunused-but-set-variable] unsigned int index; ^ drivers/media/platform/s5p-mfc/s5p_mfc_enc.c: In function 'cleanup_ref_queue': drivers/media/platform/s5p-mfc/s5p_mfc_enc.c:742:27: warning: variable 'mb_c_addr' set but not used [-Wunused-but-set-variable] unsigned long mb_y_addr, mb_c_addr; ^ drivers/media/platform/s5p-mfc/s5p_mfc_enc.c:742:16: warning: variable 'mb_y_addr' set but not used [-Wunused-but-set-variable] unsigned long mb_y_addr, mb_c_addr; ^ drivers/media/platform/s5p-mfc/s5p_mfc_enc.c: At top level: drivers/media/platform/s5p-mfc/s5p_mfc_enc.c:1684:5: warning: no previous prototype for 'vidioc_encoder_cmd' [-Wmissing-prototypes] int vidioc_encoder_cmd(struct file *file, void *priv, ^ Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Mauro Carvalho Chehab 提交于
That gets rid of the following warnings: drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:119:5: warning: no previous prototype for 's5p_mfc_release_firmware' [-Wmissing-prototypes] int s5p_mfc_release_firmware(struct s5p_mfc_dev *dev) ^ drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:132:5: warning: no previous prototype for 's5p_mfc_reset' [-Wmissing-prototypes] int s5p_mfc_reset(struct s5p_mfc_dev *dev) ^ drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:214:5: warning: no previous prototype for 's5p_mfc_init_hw' [-Wmissing-prototypes] int s5p_mfc_init_hw(struct s5p_mfc_dev *dev) ^ drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:291:6: warning: no previous prototype for 's5p_mfc_deinit_hw' [-Wmissing-prototypes] void s5p_mfc_deinit_hw(struct s5p_mfc_dev *dev) ^ drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:301:5: warning: no previous prototype for 's5p_mfc_sleep' [-Wmissing-prototypes] int s5p_mfc_sleep(struct s5p_mfc_dev *dev) ^ drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:330:5: warning: no previous prototype for 's5p_mfc_wakeup' [-Wmissing-prototypes] int s5p_mfc_wakeup(struct s5p_mfc_dev *dev) ^ drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:378:5: warning: no previous prototype for 's5p_mfc_open_mfc_inst' [-Wmissing-prototypes] int s5p_mfc_open_mfc_inst(struct s5p_mfc_dev *dev, struct s5p_mfc_ctx *ctx) ^ drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:420:6: warning: no previous prototype for 's5p_mfc_close_mfc_inst' [-Wmissing-prototypes] void s5p_mfc_close_mfc_inst(struct s5p_mfc_dev *dev, struct s5p_mfc_ctx *ctx) ^ Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Mauro Carvalho Chehab 提交于
In file included from drivers/media/platform/exynos4-is/fimc-is-param.c:31:0: drivers/media/platform/exynos4-is/fimc-is-errno.h:245:20: warning: type qualifiers ignored on function return type [-Wignored-qualifiers] const char * const fimc_is_strerr(unsigned int error); ^ drivers/media/platform/exynos4-is/fimc-is-errno.h:246:20: warning: type qualifiers ignored on function return type [-Wignored-qualifiers] const char * const fimc_is_param_strerr(unsigned int error); ^ drivers/media/platform/exynos4-is/fimc-is-param.c: In function 'fimc_is_set_initial_params': drivers/media/platform/exynos4-is/fimc-is-param.c:670:23: warning: variable 'sensor' set but not used [-Wunused-but-set-variable] struct sensor_param *sensor; ^ Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Mauro Carvalho Chehab 提交于
drivers/media/platform/s5p-g2d/g2d.c: In function 'job_abort': drivers/media/platform/s5p-g2d/g2d.c:493:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] int ret; ^ The job_abort function returns void. No sense to get the returned argument, if this won't be used. Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Mauro Carvalho Chehab 提交于
Declare this as static: drivers/media/platform/s5p-jpeg/jpeg-core.c:732:6: warning: no previous prototype for 'exynos4_jpeg_set_huff_tbl' [-Wmissing-prototypes] void exynos4_jpeg_set_huff_tbl(void __iomem *base) ^ And don't compile this dead code, while not needed: drivers/media/platform/s5p-jpeg/jpeg-hw-exynos3250.c:236:14: warning: no previous prototype for 'exynos3250_jpeg_get_y' [-Wmissing-prototypes] unsigned int exynos3250_jpeg_get_y(void __iomem *regs) ^ drivers/media/platform/s5p-jpeg/jpeg-hw-exynos3250.c:241:14: warning: no previous prototype for 'exynos3250_jpeg_get_x' [-Wmissing-prototypes] unsigned int exynos3250_jpeg_get_x(void __iomem *regs) ^ Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Mauro Carvalho Chehab 提交于
drivers/media/platform/omap/omap_vout.c: In function 'omapvid_setup_overlay': drivers/media/platform/omap/omap_vout.c:372:29: warning: variable 'pixheight' set but not used [-Wunused-but-set-variable] int cropheight, cropwidth, pixheight, pixwidth; ^ drivers/media/platform/omap/omap_vout.c: In function 'vidioc_s_ctrl': drivers/media/platform/omap/omap_vout.c:1454:24: warning: variable 'ovl' set but not used [-Wunused-but-set-variable] struct omap_overlay *ovl; ^ drivers/media/platform/omap/omap_vout.c: In function 'vidioc_reqbufs': drivers/media/platform/omap/omap_vout.c:1492:55: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] if ((req->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) || (req->count < 0)) ^ Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Mauro Carvalho Chehab 提交于
When CONFIG_VIDEO_OMAP2_VOUT_VRFB is disabled, the compilation will fail, as the function stubs are wrong. Also, as they weren't declared as static inline, lots of warnings will be generated. Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Mauro Carvalho Chehab 提交于
drivers/media/platform/exynos-gsc/gsc-core.c:855:2: note: in expansion of macro 'pr_debug' pr_debug("ADDR: y= 0x%X cb= 0x%X cr= 0x%X ret= %d", ^ include/linux/dynamic_debug.h:64:16: warning: format '%X' expects argument of type 'unsigned int', but argument 4 has type 'dma _addr_t' [-Wformat=] static struct _ddebug __aligned(8) \ ^ Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Mauro Carvalho Chehab 提交于
The needed bandwidth can be estimated using the symbol rate and the rolloff factor. This could be useful for the frontend drivers, as they don't need to calculate it themselves. Reported-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Mauro Carvalho Chehab 提交于
The fpc_table_addr is used as an unsigned integer that stores an address. At the Kernel, the proper type for such integers is unsigned long. This generates lots of warnings when compiling on 64 bits. Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Mauro Carvalho Chehab 提交于
Shut up several warnings about invalid casting when printing the values of two pointers. Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Mauro Carvalho Chehab 提交于
The 'debug' name is known to cause conflicts with allyesconfig on several archs. So, localize its name. >> drivers/built-in.o:(.bss+0xc7ee2c): multiple definition of `debug' arch/x86/built-in.o:(.entry.text+0xf78): first defined here ld: Warning: size of symbol `debug' changed from 86 in arch/x86/built-in.o to 4 in drivers/built-in.o While here, fix a wrong file name reference Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Mauro Carvalho Chehab 提交于
drivers/media/platform/soc_camera/atmel-isi.c: In function 'start_streaming': drivers/media/platform/soc_camera/atmel-isi.c:397:26: warning: large integer implicitly truncated to unsigned type [-Woverflow] isi_writel(isi, ISI_INTDIS, ~0UL); ^ Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Mauro Carvalho Chehab 提交于
Instead of using u32 for DMA address, use the proper Kernel type for it. drivers/media/platform/soc_camera/atmel-isi.c: In function 'atmel_isi_probe': >> drivers/media/platform/soc_camera/atmel-isi.c:981:26: warning: passing argument 3 of 'dma_alloc_attrs' from incompatible pointer type isi->p_fb_descriptors = dma_alloc_coherent(&pdev->dev, ^ Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Mauro Carvalho Chehab 提交于
drivers/media/platform/ti-vpe/vpdma.c: In function 'vpdma_alloc_desc_buf': >> drivers/media/platform/ti-vpe/vpdma.c:332:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] WARN_ON((u32) buf->addr & VPDMA_DESC_ALIGN); ^ Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Mauro Carvalho Chehab 提交于
drivers/media/platform/ti-vpe/vpdma.c: In function 'dump_dtd': include/linux/dynamic_debug.h:64:16: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] static struct _ddebug __aligned(8) \ ^ include/linux/dynamic_debug.h:76:2: note: in expansion of macro 'DEFINE_DYNAMIC_DEBUG_METADATA' DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \ ^ include/linux/printk.h:263:2: note: in expansion of macro 'dynamic_pr_debug' dynamic_pr_debug(fmt, ##__VA_ARGS__) ^ >> drivers/media/platform/ti-vpe/vpdma.c:587:2: note: in expansion of macro 'pr_debug' pr_debug("word2: start_addr = 0x%08x\n", dtd->start_addr); ^ Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Mauro Carvalho Chehab 提交于
drivers/media/platform/exynos-gsc/gsc-m2m.c: In function 'gsc_m2m_reqbufs': drivers/media/platform/exynos-gsc/gsc-m2m.c:365:20: warning: variable 'frame' s et but not used [-Wunused-but-set-variable] struct gsc_frame *frame; ^ Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Mauro Carvalho Chehab 提交于
drivers/media/platform/exynos-gsc/gsc-core.c: In function 'gsc_probe': drivers/media/platform/exynos-gsc/gsc-core.c:1089:2: warning: comparison is alw ays false due to limited range of data type [-Wtype-limits] if (gsc->id < 0 || gsc->id >= drv_data->num_entities) { ^ gsc->id is declared as u16, so it should always be a positive value. Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Mauro Carvalho Chehab 提交于
drivers/media/platform/davinci/dm355_ccdc.c:463:5: warning: no previous prototy pe for 'ccdc_write_dfc_entry' [-Wmissing-prototypes] int ccdc_write_dfc_entry(int index, struct ccdc_vertical_dft *dfc) ^ Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Mauro Carvalho Chehab 提交于
drivers/media/platform/davinci/dm644x_ccdc.c:133:6: warning: no previous protot ype for 'ccdc_setwin' [-Wmissing-prototypes] void ccdc_setwin(struct v4l2_rect *image_win, ^ drivers/media/platform/davinci/dm644x_ccdc.c:373:6: warning: no previous protot ype for 'ccdc_config_ycbcr' [-Wmissing-prototypes] void ccdc_config_ycbcr(void) ^ drivers/media/platform/davinci/dm644x_ccdc.c:526:6: warning: no previous protot ype for 'ccdc_config_raw' [-Wmissing-prototypes] void ccdc_config_raw(void) ^ Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Mauro Carvalho Chehab 提交于
drivers/media/platform/davinci/vpif_capture.c: In function 'vpif_channel_isr': drivers/media/platform/davinci/vpif_capture.c:376:18: warning: variable 'field' set but not used [-Wunused-but-set-variable] enum v4l2_field field; ^ drivers/media/platform/davinci/vpif_capture.c: In function 'vpif_calculate_offs ets': drivers/media/platform/davinci/vpif_capture.c:536:23: warning: variable 'vpitch ' set but not used [-Wunused-but-set-variable] unsigned int hpitch, vpitch, sizeimage; ^ Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Mauro Carvalho Chehab 提交于
drivers/media/platform/davinci/vpif_display.c: In function 'vpif_channel_isr': drivers/media/platform/davinci/vpif_display.c:363:18: warning: variable 'field' set but not used [-Wunused-but-set-variable] enum v4l2_field field; ^ drivers/media/platform/davinci/vpif_display.c: In function 'vpif_calculate_offs ets': drivers/media/platform/davinci/vpif_display.c:505:23: warning: variable 'vpitch ' set but not used [-Wunused-but-set-variable] unsigned int hpitch, vpitch, sizeimage; ^ drivers/media/platform/davinci/vpif_display.c: In function 'vpif_set_output': drivers/media/platform/davinci/vpif_display.c:816:27: warning: variable 'subdev _info' set but not used [-Wunused-but-set-variable] struct vpif_subdev_info *subdev_info = NULL; Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-