We were using it at 10 kHz, which doesn't work in machines where somehow
the max freq was auto reduced by the kernel:

[root@ssdandy ~]# perf test 19
19: Test software clock events have valid period values    : FAILED!
[root@ssdandy ~]# perf test -v 19
19: Test software clock events have valid period values    :
--- start ---
Couldn't open evlist: Invalid argument
---- end ----
Test software clock events have valid period values: FAILED!
[root@ssdandy ~]#

[root@ssdandy ~]# cat /proc/sys/kernel/perf_event_max_sample_rate
7000

Reducing it to 500 Hz should be good enough for this test and also
shouldn't affect what it is testing.

But warn the user if it fails, informing the knob and the freq tried.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-548rhj1uo6xbwnxa95kw3hqe@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We were not checking if we successfully opened the counters, i.e. if
sys_perf_event_open worked, when it doesn't in this test, we were
continuing anyway and then segfaulting when trying to access the file
descriptor array, that at that point had been freed in perf_evlist__open
error path:

[root@ssdandy ~]# perf test -v 19
19: Test software clock events have valid period values    :
--- start ---
Segmentation fault (core dumped)
[root@ssdandy ~]#

Do the check and bail out instead.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6qy8ljkn0e9hm7bh7keo5z68@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Code move only; no logic changes. In preparation for the mmap based
output option in the next patch.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1383884605-30968-2-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

write() returns a 'ssize_t' not an 'int'.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1383906470-21002-1-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

If given sort keys are all elided there'll be no output except for the
overhead column - actually the TUI shows a noisy output.  In this case
it'd be better to show up the sort keys rather than elide.

Before:

  $ perf report -s comm -c perf
  (...)
  # Overhead
  # ........
  #
     100.00%

After:

  $ perf report -s comm -c perf
  (...)
  # Overhead  Command
  # ........  .......
  #
     100.00%     perf
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1383900822-14609-1-git-send-email-namhyung@kernel.org
[ Us curly braces around multi-line statements, as requested by Ingo Molnar ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Several tools (top, kvm) don't need to be called back to process each of
the syntheiszed records, instead relying on the machine__process_event
function to change the per machine data structures that represent
threads and mmaps, so provide a way to ask for this common idiom.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pusqibp8n3c4ynegd1frn4zd@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Further simplifications to be done on following patch, as most tools
don't use the callback, using instead just the canned
machine__process_event one.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-r1m0vuuj3cat4bampno9yc8d@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When perf_event_attr.mmap_data is set the kernel will generate
PERF_RECORD_MMAP events when non-exec (data, SysV mem) mmaps are
created, so we need to synthesize from /proc/pid/maps for existing
threads, as we do for exec mmaps.

Right now just 'perf record' does it, but any other tool that uses
perf_event__synthesize_thread(s|map) can request it.
Reported-by: NDon Zickus <dzickus@redhat.com>
Tested-by: NDon Zickus <dzickus@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Bill Gray <bgray@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Fowles <rfowles@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ihwzraikx23ian9txinogvv2@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Most uses of the evsel constructor are followed by a call to
perf_evlist__add with an idex of evlist->nr_entries, so make rename
the current constructor to perf_evsel__new_idx and remove the need
for passing the constructor for the common case.

We still need the new_idx variant because the way groups are handled,
with evsel->nr_members holding the number of entries in an evlist,
partitioning the evlist into sublists inside a single linked list.

This asks for a clarifying refactoring, but for now simplify the non
parser cases, so that tool writers don't have to bother with evsel idx
setting.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zy9tskx6jqm2rmw7468zze2a@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Each call to tui_progress__update() would forcibly refresh the entire
screen.  This is somewhat inefficient and causes noticable flickering
during the startup of perf-report, especially on large/slow terminals.

It looks like the force-refresh in tui_progress__update() serves no
purpose other than to clear the screen so that the progress bar of a
previous operation does not subsume that of a subsequent operation.  But
we can do just that in a much more efficient manner by clearing only the
region that a previous progress bar may have occupied before repainting
the new progress bar.  Then the force-refresh could be removed with no
change in visuals.

This patch disables the slow force-refresh in tui_progress__update() and
instead calls SLsmg_fill_region() on the entire area that the progress
bar may occupy before repainting it.  This change makes the startup of
perf-report much faster and appear much "smoother".

It turns out that this was a big bottleneck in the startup speed of
perf-report -- with this patch, perf-report starts up ~2x faster (1.1s
vs 0.55s) on my machines.  (These numbers were measured by running "time
perf report" on an 8MB perf.data and pressing 'q' immediately.)
Signed-off-by: NPatrick Palka <patrick@parcs.ath.cx>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1382747149-9716-1-git-send-email-patrick@parcs.ath.cxSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Merge branch 'uprobes/core' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc into perf/core

Pull uprobes fixes from Oleg Nesterov.
Signed-off-by: NIngo Molnar <mingo@kernel.org>

1. copy_insn() doesn't look very nice, all calculations are
   confusing and it is not immediately clear why do we read
   the 2nd page first.

2. The usage of inode->i_size is wrong on 32-bit machines.

3. "Instruction at end of binary" logic is simply wrong, it
   doesn't handle the case when uprobe->offset > inode->i_size.

   In this case "bytes" overflows, and __copy_insn() writes to
   the memory outside of uprobe->arch.insn.

   Yes, uprobe_register() checks i_size_read(), but this file
   can be truncated after that. All i_size checks are racy, we
   do this only to catch the obvious mistakes.

Change copy_insn() to call __copy_insn() in a loop, simplify
and fix the bytes/nbytes calculations.

Note: we do not care if we read extra bytes after inode->i_size
if we got the valid page. This is fine because the task gets the
same page after page-fault, and arch_uprobe_analyze_insn() can't
know how many bytes were actually read anyway.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

Commit aa59c53f "uprobes: Change uprobe_copy_process() to dup
xol_area" has a stupid typo, we need to setup t->utask->vaddr but
the code wrongly uses current->utask.

Even with this bug dup_xol_work() works "in practice", but only
because get_unmapped_area(NULL, TASK_SIZE - PAGE_SIZE) likely
returns the same address every time.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

  * Fix version when building out of tree, as when using one of these:

    $ make help | grep perf
      perf-tar-src-pkg    - Build perf-3.12.0.tar source tarball
      perf-targz-src-pkg  - Build perf-3.12.0.tar.gz source tarball
      perf-tarbz2-src-pkg - Build perf-3.12.0.tar.bz2 source tarball
      perf-tarxz-src-pkg  - Build perf-3.12.0.tar.xz source tarball
    $

    from David Ahern.

  * Don't relookup fields by name in each sample in 'trace',
    by Arnaldo Carvalho de Melo.

  * 'perf record' code cleanups, from David Ahern.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

There is no point in sort.h including itself.

The include was added when the file was created, in commit "perf tools:
Create util/sort.and use it" (dd68ada2) and added a include to "sort.h"
in lot of files (all the files that started using the file). It was
probably added by mistake on sort.h too.
Signed-off-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1383776454-10595-1-git-send-email-rodrigo@sdfg.com.arSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Duplicates the data_offset from header in the session.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1383763297-27066-4-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

1 line function with only 1 user; might as well embed directly.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Suggested-by: NIngo Molnar <mingo@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1383763297-27066-3-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Code move only. No logic changes.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1383763297-27066-2-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Instead do the lookups just when creating the tracepoints, initially for
the most common, raw_syscalls:sys_{enter,exit}.

It works by having evsel->priv have a per tracepoint structure with
entries for the fields, for direct access, with the offset and a
function to get the value from the sample, doing the swap if needed.

Using a simple workload that does M millions write syscalls, we go from:

 # perf stat -i -e cycles /tmp/oldperf trace ./sc_hello 100 > /dev/null

 Performance counter stats for '/tmp/oldperf trace ./sc_hello 100':

     8,366,771,459 cycles

       2.668025928 seconds time elapsed

 # perf stat -i -e cycles perf trace ./sc_hello 100 > /dev/null

 Performance counter stats for 'perf trace ./sc_hello 100':

     8,345,187,650 cycles

       2.631748425 seconds time elapsed

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-eyfhvoo510a5i10b27dnvm88@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When building perf out of tree:

  $ make perf-tar-src-pkg
  $ tar -xf perf-<ver>.tar -C /tmp
  $ cd /tmp/perf<ver>
  $ make -C tools/perf

you get this warning message:
    make[1]: *** No rule to make target `kernelversion'.  Stop.

Fix it by saving the perf version in the tar file and using that for the
out of tree builds.

v2: removed short form request and fixed up version string from usual output.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Suggested-by: NIngo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1383753335-25782-1-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Not needed since this cset:

  fcf65bf1: perf evsel: Cache associated event_format

So lets trim this struct a bit.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-j8setslokt0goiwxq9dogzqm@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Merge branch 'uprobes/core' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc into perf/core

Pull uprobes updates from Oleg Nesterov:

 " [...] this way the upcoming ARM port doesn't (almost) need
   changes outside of arch/arm and thus it would be simpler to
   route everything via the ARM trees. "
Signed-off-by: NIngo Molnar <mingo@kernel.org>

set_swbp() and set_orig_insn() are __weak, but this is pointless
because write_opcode() is static.

Export write_opcode() as uprobe_write_opcode() for the upcoming
arm port, this way it can actually override set_swbp() and use
__opcode_to_mem_arm(bpinsn) instead if UPROBE_SWBP_INSN.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

Currently xol_get_insn_slot() assumes that we should simply copy
arch_uprobe->insn[] which is (ignoring arch_uprobe_analyze_insn)
just the copy of the original insn.

This is not true for arm which needs to create another insn to
execute it out-of-line.

So this patch simply adds the new member, ->ixol into the union.
This doesn't make any difference for x86 and powerpc, but arm
can divorce insn/ixol and initialize the correct xol insn in
arch_uprobe_analyze_insn().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

Turn module_init() into __initcall() and kill module_exit().

This code can't be compiled as a module so these module_*()
calls only add the confusion, especially if arch-dependant
code needs its own initialization hooks.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

Move the function declarations from the arch headers to the common
header, since only the function bodies are architecture-specific.
These changes are from Vincent Rabin's uprobes patch.

[ oleg: update arch/powerpc/include/asm/uprobes.h ]
Signed-off-by: NRabin Vincent <rabin@rab.in>
Signed-off-by: NDavid A. Long <dave.long@linaro.org>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

Unlike other uncore boxes, IRP boxes live in PCI buses with no UBOX
device. For PCI bus without UBOX device, we find the next bus that
has UBOX device and use its 'bus to socket' mapping.

Besides the counter/control registers in IRP boxes are not properly
aligned.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: eranian@google.com
Cc: "Yan Zheng" <zheng.z.yan@intel.com>
Link: http://lkml.kernel.org/r/1383197815-17706-2-git-send-email-zheng.z.yan@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The encoding for filter registers of IvyBridge-EP uncore QPI boxes is
completely the same as SandyBridge-EP.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: eranian@google.com
Cc: "Yan Zheng" <zheng.z.yan@intel.com>
Link: http://lkml.kernel.org/r/1383197815-17706-1-git-send-email-zheng.z.yan@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

While this is really minor, but strncpy() does the unnecessary
zero-padding till the end of tmp[16] and it is called every time
we are going to use the string literal.

Turn these strncpy()'s into the single strlcpy() under the new
label, saves 72 bytes.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131017182417.GA17753@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

To match patch bf378d34 ("perf: Fix perf ring buffer memory
ordering") change userspace to also adhere to the ordering outlined.
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Michael Neuling <mikey@neuling.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: james.hogan@imgtec.com
Cc: Vince Weaver <vince@deater.net>
Cc: Victor Kaplansky <VICTORK@il.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Michael Ellerman <michael@ellerman.id.au>
Link: http://lkml.kernel.org/r/20131030104246.GH16117@laptop.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

The arch_perf_output_copy_user() default of
__copy_from_user_inatomic() returns bytes not copied, while all other
argument functions given DEFINE_OUTPUT_COPY() return bytes copied.

Since copy_from_user_nmi() is the odd duck out by returning bytes
copied where all other *copy_{to,from}* functions return bytes not
copied, change it over and ammend DEFINE_OUTPUT_COPY() to expect bytes
not copied.

Oddly enough DEFINE_OUTPUT_COPY() already returned bytes not copied
while expecting its worker functions to return bytes copied.
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Acked-by: will.deacon@arm.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20131030201622.GR16117@laptop.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Michael Neuling <mikey@neuling.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: james.hogan@imgtec.com
Cc: Vince Weaver <vince@deater.net>
Cc: Victor Kaplansky <VICTORK@il.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Anton Blanchard <anton@samba.org>
Link: http://lkml.kernel.org/n/tip-9s5mze78gmlz19agt39i8rii@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Rewrite the handle address calculation code to be clearer.

Saves 8 bytes on x86_64-defconfig.
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Michael Neuling <mikey@neuling.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: james.hogan@imgtec.com
Cc: Vince Weaver <vince@deater.net>
Cc: Victor Kaplansky <VICTORK@il.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Anton Blanchard <anton@samba.org>
Link: http://lkml.kernel.org/n/tip-3trb2n2henb9m27tncef3ag7@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Avoid touching the lost_event and sample_data cachelines twince. Its
not like we end up doing less work, but it might help to keep all
accesses to these cachelines in one place.

Due to code shuffle, this looses 4 bytes on x86_64-defconfig.
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Michael Neuling <mikey@neuling.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: james.hogan@imgtec.com
Cc: Vince Weaver <vince@deater.net>
Cc: Victor Kaplansky <VICTORK@il.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Anton Blanchard <anton@samba.org>
Link: http://lkml.kernel.org/n/tip-zfxnc58qxj0eawdoj31hhupv@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

There's no point in re-doing the memory-barrier when we fail the
cmpxchg(). Also placing it after the space reservation loop makes it
clearer it only separates the userpage->tail read from the data
stores.
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Michael Neuling <mikey@neuling.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: james.hogan@imgtec.com
Cc: Vince Weaver <vince@deater.net>
Cc: Victor Kaplansky <VICTORK@il.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Anton Blanchard <anton@samba.org>
Link: http://lkml.kernel.org/n/tip-c19u6egfldyx86tpyc3zgkw9@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Add unlikely() annotations to 'slow' paths:

When having a sampling event but no output buffer; you have bigger
issues -- also the bail is still faster than actually doing the work.

When having a sampling event but a control page only buffer, you have
bigger issues -- again the bail is still faster than actually doing
work.

Optimize for the case where you're not loosing events -- again, not
doing the work is still faster but make sure that when you have to
actually do work its as fast as possible.

The typical watermark is 1/2 the buffer size, so most events will not
take this path.

Shrinks perf_output_begin() by 16 bytes on x86_64-defconfig.
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Michael Neuling <mikey@neuling.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: james.hogan@imgtec.com
Cc: Vince Weaver <vince@deater.net>
Cc: Victor Kaplansky <VICTORK@il.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Anton Blanchard <anton@samba.org>
Link: http://lkml.kernel.org/n/tip-wlg3jew3qnutm8opd0hyeuwn@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

By using CIRC_SPACE() we can obviate the need for perf_output_space().

Shrinks the size of perf_output_begin() by 17 bytes on
x86_64-defconfig.
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Michael Neuling <mikey@neuling.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: james.hogan@imgtec.com
Cc: Vince Weaver <vince@deater.net>
Cc: Victor Kaplansky <VICTORK@il.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Anton Blanchard <anton@samba.org>
Link: http://lkml.kernel.org/n/tip-vtb0xb0llebmsdlfn1v5vtfj@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

  * Check maximum frequency rate for record/top, emitting better error
    messages, from Jiri Olsa.

  * Disable live kvm command if timerfd is not supported, from David Ahern.

  * Add usage to 'perf list', from David Ahern.

  * Fix detection of non-core features, from David Ahern.

  * Consolidate __hists__add_*entry(), cleanup from Namhyung Kim.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

They convey no information, perhaps I was bitten by some snake at some
point, complete the detox by naming the last of those arguments more
sensibly.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-u1r0dnjoro08dgztiy2g3t2q@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adding the check for maximum allowed frequency rate defined in following
file:

  /proc/sys/kernel/perf_event_max_sample_rate

When we cross the maximum value we fail and display detailed error
message with advise.

  $ perf record -F 3000 ls
  Maximum frequency rate (2000) reached.
  Please use -F freq option with lower value or consider
  tweaking /proc/sys/kernel/perf_event_max_sample_rate.

In case user does not specify the frequency and the default value cross
the maximum, we display warning and set the frequency value to the
current maximum.

  $ perf record ls
  Lowering default frequency rate to 2000.
  Please consider tweaking /proc/sys/kernel/perf_event_max_sample_rate.

Same messages are used for 'perf top'.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1383660887-1734-4-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>