- 28 10月, 2009 7 次提交
-
-
由 Anton Blanchard 提交于
We can monitor the effectiveness of our power management of both the kernel and hypervisor by probing the timer interrupt. For example, on this box we see 10.37s timer interrupts on an idle core: <idle>-0 [010] 3900.671297: timer_interrupt_entry: pt_regs=c0000000ce1e7b10 <idle>-0 [010] 3900.671302: timer_interrupt_exit: pt_regs=c0000000ce1e7b10 <idle>-0 [010] 3911.042963: timer_interrupt_entry: pt_regs=c0000000ce1e7b10 <idle>-0 [010] 3911.042968: timer_interrupt_exit: pt_regs=c0000000ce1e7b10 <idle>-0 [010] 3921.414630: timer_interrupt_entry: pt_regs=c0000000ce1e7b10 <idle>-0 [010] 3921.414635: timer_interrupt_exit: pt_regs=c0000000ce1e7b10 Since we have a 207MHz decrementer it will go negative and fire every 10.37s even if Linux is completely idle. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Anton Blanchard 提交于
This adds powerpc-specific tracepoints for interrupt entry and exit. While we already have generic irq_handler_entry and irq_handler_exit tracepoints there are cases on our virtualised powerpc machines where an interrupt is presented to the OS, but subsequently handled by the hypervisor. This means no OS interrupt handler is invoked. Here is an example on a POWER6 machine with the patch below applied: <idle>-0 [006] 3243.949840744: irq_entry: pt_regs=c0000000ce31fb10 <idle>-0 [006] 3243.949850520: irq_exit: pt_regs=c0000000ce31fb10 <idle>-0 [007] 3243.950218208: irq_entry: pt_regs=c0000000ce323b10 <idle>-0 [007] 3243.950224080: irq_exit: pt_regs=c0000000ce323b10 <idle>-0 [000] 3244.021879320: irq_entry: pt_regs=c000000000a63aa0 <idle>-0 [000] 3244.021883616: irq_handler_entry: irq=87 handler=eth0 <idle>-0 [000] 3244.021887328: irq_handler_exit: irq=87 return=handled <idle>-0 [000] 3244.021897408: irq_exit: pt_regs=c000000000a63aa0 Here we see two phantom interrupts (no handler was invoked), followed by a real interrupt for eth0. Without the tracepoints in this patch we would have missed the phantom interrupts. Signed-off-by: NAnton Blanchard <anton@samba.org> Acked-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Anton Blanchard 提交于
Hook up the alignment-faults and emulation-faults events for powerpc. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Anton Blanchard 提交于
perf_event wants a separate event for alignment and emulation faults, so create another emulation event. This will make it easy to hook in perf_event at one spot. We pass in regs which will be required for these events. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Anton Blanchard 提交于
Add two more software events that are common to many cpus. Alignment faults: When a load or store is not aligned properly. Emulation faults: When an instruction is emulated in software. Both cause a very significant slowdown (100x or worse), so identifying and fixing them is very important. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Anton Blanchard 提交于
In continuous sampling mode we want the SDAR to update. While we can select between dcache misses and ERAT (L1-TLB) misses, a decent default is to enable both. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Anton Blanchard 提交于
When we take an exception and the SDAR isn't synchronised we currently log 0 as the address. Unfortunately this is a pretty common value, so use ~0UL instead. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 15 10月, 2009 15 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: sbp2: provide fallback if mgt_ORB_timeout is missing ieee1394: add documentation entry to MAINTAINERS ieee1394: update URLs in debugging-via-ohci1394.txt
-
由 Linus Torvalds 提交于
* branch 'tty-fixes': tty: use the new 'flush_delayed_work()' helper to do ldisc flush workqueue: add 'flush_delayed_work()' to run and wait for delayed work Make flush_to_ldisc properly handle parallel calls
-
由 Linus Torvalds 提交于
Merge branch 'topic/x86-lds-nits' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland * 'topic/x86-lds-nits' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland: x86: linker script syntax nits
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: watchdog: Fix rio watchdog probe function sparc64: Set IRQF_DISABLED on LDC channel IRQs. sparc64: Fix D-cache flushing on swapin from SW devices. sparc64: Fix niagara2 perf IRQ bits.
-
git://git390.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] sclp_vt220 build fix [S390] cio: change misleading console logic [S390] call home support: fix proc handler [S390] dasd: use idal for device characteristics [S390] Add highgprs facility to /proc/cpuinfo [S390] dasd: fix locking bug [S390] tape390: Fix request queue handling in block driver [S390] hypfs: Use subcode 6 if subcode 7 is not available
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* 'sh/for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Fix a TRACE_IRQS_OFF typo. sh: Optimize the setup_rt_frame() I-cache flush. sh: Populate initial secondary CPU info from boot_cpu_data. sh: Tidy up SMP cpuinfo. sh: Use boot_cpu_data for FPU tests in sigcontext paths. sh: ftrace: Fix up syscall tracepoint support. sh: force dcache flush if dcache_dirty bit set. sh: update die() output.
-
由 Linus Torvalds 提交于
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: oprofile: warn on freeing event buffer too early oprofile: fix race condition in event_buffer free lockdep: Use cpu_clock() for lockstat
-
由 Linus Torvalds 提交于
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf events: Update MAINTAINERS entry file patterns perf tools: Remove static debugfs path from parse-events perf tools: Fix the NO_64BIT build on pure 64-bit systems perf tools: Fix const char type propagation
-
由 Linus Torvalds 提交于
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Fix missing kernel-doc notation Revert "x86, timers: Check for pending timers after (device) interrupts" sched: Update the clock of runqueue select_task_rq() selected
-
由 Linus Torvalds 提交于
Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tracing/filters: Fix memory leak when setting a filter tracing: fix trace_vprintk call
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86/paravirt: Use normal calling sequences for irq enable/disable x86: fix kernel panic on 32 bits when profiling x86: Fix Suspend to RAM freeze on Acer Aspire 1511Lmi laptop x86, vmi: Mark VMI deprecated and schedule it for removal
-
由 Roland McGrath 提交于
The linker scripts grew some use of weirdly wrong linker script syntax. It happens to work, but it's not what the syntax is documented to be. Clean it up to use the official syntax. Signed-off-by: NRoland McGrath <roland@redhat.com> CC: Ian Lance Taylor <iant@google.com>
-
由 Stefan Richter 提交于
The Unit_Characteristics entry of an SBP-2 unit directory is not mandatory as far as I can tell. If it is missing, we would probably fail to log in into the target because firewire-sbp2 would not wait for status after it sent the login request. The fix moves the cleanup of tgt->mgt_orb_timeout into a place where it is executed exactly once before login, rather than 0..n times depending on the target's config ROM. With targets with one or more Unit_Characteristics entries, the result is the same as before. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Linus Torvalds 提交于
This way all flush_to_ldisc work is always done through the workqueues, and we thus have a single point of serialization. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
It basically turns a delayed work into an immediate work, and then waits for it to finish.
-
- 14 10月, 2009 18 次提交
-
-
由 Linus Torvalds 提交于
-
由 Michael Holzheu 提交于
Fix this build error: next-20091013 randconfig build on s390x build breaks with drivers/s390/built-in.o:(.data+0x3354): undefined reference to `sclp_vt220_pm_event_fn' Reported-by: NKamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: NMichael Holzheu <michael.holzheu@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Peter Oberparleiter 提交于
Use cio_is_console() in io_subchannel_probe to indicate that the special handling is console specific. As long as there is no other subchannel for which this might be true, it is misleading to speak of "early devices". Should more of these devices be introduced, a cleanup of all console special handling is in order anyway. Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
8d65af78 "sysctl: remove "struct file *" argument of ->proc_handler" removed the struct file argument from all proc_handlers but didn't change the call home proc handler (or call home was merged later). So fix this now. Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Hans-Joachim Picht <hans@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Stefan Haberland 提交于
If the rdc_buffer is above 2G we need indirect addresssing so we have to use an idaw to give the rdc_buffer to the ccw. If the rdc_buffer is under 2G nothing changes. Signed-off-by: NStefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Andreas Krebbel 提交于
This patch makes the hwcap bit for the high gprs feature to be visible in /proc/cpuinfo. Signed-off-by: NAndreas Krebbel <Andreas.Krebbel@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Stefan Haberland 提交于
Replace spin_lock with spin_lock_irqsave in dasd_eckd_restore_device. Signed-off-by: NStefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
When setting a channel attached tape online under Linux 2.6.31, the "vol_id" process from udev hangs in sync_page(): 2 sync_page+144 [0x1dfaac] 3 __wait_on_bit_lock+194 [0x58c23e] 4 __lock_page+116 [0x1df9dc] 5 truncate_inode_pages_range+728 [0x1ed7cc] 6 __blkdev_put+244 [0x25f738] 7 __fput+300 [0x229c4c] 8 filp_close+122 [0x225a3a] The reason for that is an error in the request queue handling. It can happen that we fetch a request, but do not process it further because the number of queued requests exceeds TAPEBLOCK_MIN_REQUEUE. To fix this, we should call blk_peek_request() instead of blk_fetch_request() in the while condition and fetch the request in the loop body afterwards. This bug was introduced with the patch "block: implement and enforce request peek/start/fetch" (9934c8c0) Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
Hypfs never worked on systems that only provide D204 subcode 6. In these cases we nevertheless used subcode 7. With this fix, we use subcode 6, if it is available and the system does not provide subcode 7. Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Thomas Gleixner 提交于
After sucessfully registering the misc device the driver iounmaps the hardware registers and kfree's the device data structure. Ouch ! This was introduced with commit e42311d7 (riowatchdog: Convert to pure OF driver) and went unnoticed for more than a year :) Return success instead of dropping into the error cleanup code path. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Mundt 提交于
The resume_userspace path had TRACE_IRQS_OFF written incorrectly and so never handled the transition properly. This was fixed once before but seems to have made it back in the tree. Fix it for good. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
This only needs to flush the return code via the legacy path, and just invalidates uselessly otherwise. This makes the behaviour consistent for all of the trampoline setup paths. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
The secondary CPU info was seeing corrupted results due to not entering all of the setup paths taken by the boot CPU. So we just memcpy() the boot cpu data over directly, and then fix up the per-CPU bits. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Trivial change for cleaning up the cpuinfo pretty printing on SMP, adds a newline between CPUs. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
We do not want to use smp_processor_id() from these paths, as they trip preempt BUGs. Switch the test over to the boot cpu directly. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: cciss: Add cciss_allow_hpsa module parameter cciss: Fix multiple calls to pci_release_regions blk-settings: fix function parameter kernel-doc notation writeback: kill space in debugfs item name writeback: account IO throttling wait as iowait elv_iosched_store(): fix strstrip() misuse cfq-iosched: avoid probable slice overrun when idling cfq-iosched: apply bool value where we return 0/1 cfq-iosched: fix think time allowed for seekers cfq-iosched: fix the slice residual sign cfq-iosched: abstract out the 'may this cfqq dispatch' logic block: use proper BLK_RW_ASYNC in blk_queue_start_tag() block: Seperate read and write statistics of in_flight requests v2 block: get rid of kblock_schedule_delayed_work() cfq-iosched: fix possible problem with jiffies wraparound cfq-iosched: fix issue with rq-rq merging and fifo list ordering
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: fix compile warnings
-
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes: kbuild: revert "save ARCH & CROSS_COMPILE ..." warn about use of uninstalled kernel headers kbuild: mkcompile_h: trivial cleanups kbuild: fix warning when domainname is not available kbuild: Fix size_append issue for bzip2/lzma kernel kbuild,scripts: use non-builtin echo for '-e' kbuild: fix the binrpm-pkg target to work with KBUILD_OUTPUT set
-