- 17 11月, 2011 33 次提交
-
-
由 david decotigny 提交于
This change makes sure that tx_packets/rx_bytes ifconfig counters are updated even on NICs that don't provide hardware support for these stats: they are now updated in software. For the sake of consistency, we also now have tx_bytes updated in software (hardware counters include ethernet CRC, and software doesn't account for it). This reverts parts of: - "forcedeth: statistics optimization" (21828163) - "forcedeth: Improve stats counters" (0bdfea8b) - "forcedeth: remove unneeded stats updates" (4687f3f3) Tested: pktgen + loopback (http://patchwork.ozlabs.org/patch/124698/) reports identical tx_packets/rx_packets and tx_bytes/rx_bytes. Signed-off-by: NDavid Decotigny <david.decotigny@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> (cherry picked from commit 898bdf2c)
-
由 Michał Mirosław 提交于
Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michał Mirosław 提交于
Save some punctuation by using bool type's property equivalent to doubled negation operator. Reported-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michał Mirosław 提交于
Add missing spaces around multiplication operator. Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Reduce the number of #defines, use the normal #define from if_ether.h Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Reduce the number of #defines, use the normal #define from if_ether.h Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Reduce the number of #defines, use the normal #define from if_ether.h Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Reduce the number of #defines, use the normal #define from if_ether.h Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Reduce the number of #defines, use the normal #define from if_ether.h Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
Translating between ethtool advertisement settings and MII advertisements are common operations for ethernet drivers. This patch adds a set of helper functions that implements the conversion. The patch then modifies a couple of the drivers to use the new functions. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Since multiple team instances are putting defined options into their option list, during register each option must be cloned before added into list. This resolves uncool memory corruptions when using multiple teams. Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
No need to have spinlock for this purpose. So convert this to mutex and avoid current schedule while atomic problems in netlink code. Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
dev_queue_xmit() consumes its own skb, so the call to dev_kfree_skb() in lowpan_fragment_xmit() is a double free. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Padmanabh Ratnakar 提交于
Use V1 version of query link status command for Lancer. Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Padmanabh Ratnakar 提交于
To enable VLAN promiscous mode, the HW interface should be created with VLAN promiscous capability in Lancer. Add this capability during creation of the HW interface. Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Padmanabh Ratnakar 提交于
Implemented eeprom dump using ethtool feature for Lancer. Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Padmanabh Ratnakar 提交于
Implement register dump using ethtool for Lancer. Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Padmanabh Ratnakar 提交于
Lancer uses V1 version of TXQ create. This command needs interface id for TX queue creation. Rearrange code such that tx queue create is after interface create. As TXQ create is now called after MCC ring create use MCC instead of MBOX. Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michał Mirosław 提交于
Only distinct use is checking if NETIF_F_NOCACHE_COPY should be enabled by default. The check heuristics is altered a bit here, so it hits other people than before. The default shouldn't be trusted for performance-critical cases anyway. For all other uses NETIF_F_NO_CSUM is equivalent to NETIF_F_HW_CSUM. Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michał Mirosław 提交于
Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michał Mirosław 提交于
v2: changed loop in ethtool_set_features() per Ben's suggestion Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michał Mirosław 提交于
Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michał Mirosław 提交于
Define feature values by bit position instead of direct 2**i values and force the values to be of type netdev_features_t. Cleaned and extended from patch by Mahesh Bandewar <maheshb@google.com>: + added netdev_features_t casts + included bits under NETIF_F_GSO_MASK + moved feature #defines out of struct net_device definition Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michał Mirosław 提交于
v2: add couple missing conversions in drivers split unexporting netdev_fix_features() implemented %pNF convert sock::sk_route_(no?)caps Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michał Mirosław 提交于
Move features definitions to separate header so that linux/skbuff.h won't need to include linux/netdevice.h after netdev_features_t is introduced. Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michał Mirosław 提交于
This is the only place left where dev->features are directly exposed to userspace. I know checkpatch.pl complains about __ethtool_{get,set}_flags(), but the code is easier to read this way. Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michał Mirosław 提交于
As all drivers are converted, we may now remove discrete offload setting callback handling. Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rick Jones 提交于
Convert some remaining straglers' .get_drvinfo routines to use strlcpy rather than strcpy/strncpy. Signed-off-by: NRick Jones <rick.jones2@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
netstamp_needed seems a good candidate to jump_label conversion. This avoids 3 conditional branches per incoming packet in fast path. No measurable difference, given that these conditional branches are predicted on modern cpus. Only a small icache reduction, thanks to the unlikely() stuff. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rick Jones 提交于
Add a new .bus_name to virtio_config_ops then modify virtio_net to call through to it in an ethtool .get_drvinfo routine to report bus_info in ethtool -i output which is consistent with other emulated NICs and the output of lspci. Signed-off-by: NRick Jones <rick.jones2@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 11月, 2011 7 次提交
-
-
由 Joe Perches 提交于
Use the normal #defines not module specific ones. Signed-off-by: NJoe Perches <joe@perches.com> Tested-by: NStephen Ko <stephen.s.ko@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Joe Perches 提交于
printks should use KERN_ levels. Signed-off-by: NJoe Perches <joe@perches.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jeff Kirsher 提交于
Based on original patch from Joe Perches <joe@perches.com> Use the current logging styles. pr_<level> conversions are now prefixed with "igb: " Correct a defect where the trailing NTU may have been printed on a separate line because of an interleaving hex_dump. Remove unnecessary uses of KERN_CONT and use single pr_info()s to avoid any possible output interleaving from other modules. Coalesce formats as appropriate. -v2 fix-up to make checkpatch.pl compliant and remove change to the copyright line CC: Joe Perches <joe@perches.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com>
-
由 Jeff Kirsher 提交于
Based on the original patch from Joe Perches <joe@perches.com> Use the current logging styles, prefix output with "ixgbevf: " Add #define pr_fmt Coalesce formats. -v2 Fix-up to make checkpatch.pl compliant and remove change to copyright line CC: Joe Perches <joe@perches.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: NSibai Li <sibai.li@intel.com>
-
由 Jeff Kirsher 提交于
Based on the previous patch from Joe Perches <joe@perches.com> Use current logging styles. Prefix all output via #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Neaten link status dev_info. -v2 Remove Copyright changes and fix-up patch to make it checkpatch.pl compliant. CC: Joe Perches <joe@perches.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: NSibai Li <sibai.li@intel.com>
-
由 Emil Tantilov 提交于
Previously the driver would force link without checking whether the link was already established. This caused some inconsistencies in the LED blink rate. Do not force link if link is already up. Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jeff Kirsher 提交于
Based on the original patch from Joe Perches. Use the current logging styles. pr_<level> conversions are now prefixed with "e1000e:" Correct a couple of defects where the trailing NTU may have been printed on a separate line because of an interleaving hex_dump. Remove unnecessary uses of KERN_CONT and use single pr_info()s to avoid any possible output interleaving from other modules. Coalesce formats as appropriate. Remove an extra space from a broken across lines coalescing of "Link Status " and " Change". -v2 Remove changes to Copyright string CC: Joe Perches <joe@perches.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com>
-