Add blank lines between a few tests, remove an extraneous one.
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Using yield() is generally wrong.  Warn on its use.
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add some more subjective --strict tests.

Add a test for block comments that start with a blank line followed only
by a line with just the comment block initiator.  Prefer a blank line
followed by /* comment...

Add a test for unnecessary spaces after a cast.

Add a test for symmetric uses of braces in if/else blocks.
If one branch needs braces, then all branches should use braces.
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add [] to a type extensions.  Fixes false positives on:

    .attrs = (struct attribute *[]) {
Signed-off-by: NAndy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With any very high precedence operator it is not necessary to enforce
additional parentheses around simple negated expressions.  This prevents
us requesting further perentheses around the following:

    #define PMEM_IS_FREE(id, index) !(pmem[id].bitmap[index].allocated)

For now add logical and bitwise not and unary minus.
Signed-off-by: NAndy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Adjacent strings indicate concatentation, therefore look at identifiers
directly adjacent to literal strings as strings too.  This allows us to
better detect the form below and accept it as a simple constant:

    #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Signed-off-by: NAndy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAndy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Handle the [ A ... B ] form deeper into a definition, for example:

    static const unsigned char pci_irq_swizzle[2][PCI_MAX_DEVICES] = {
	    {0, 0, 0, 0, 0, 0, 0, 27, 27, [9 ... PCI_MAX_DEVICES - 1] = 0 },
	    {0, 0, 0, 0, 0, 0, 0, 29, 29, [9 ... PCI_MAX_DEVICES - 1] = 0 },
    };
Reported-by: NMarek Vasut <marek.vasut@gmail.com>
Signed-off-by: NAndy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix checkpatch.pl when both -q and --ignore are given and prevents it from
printing a

NOTE: Ignored message types: blah

messages.

E.g., if I use -q --ignore PREFER_PACKED,PREFER_ALIGNED, i see:

NOTE: Ignored message types: PREFER_ALIGNED PREFER_PACKED

It makes no sense to print this when -q is given.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Argument alignment across multiple lines should match the open
parenthesis.

Logical continuations should be at the end of the previous line, not the
start of a new line.

These are not required by CodingStyle so make the tests active only when
using --strict.

Improved by some examples from Bruce Allen.
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: "Bruce W. Allen" <bruce.w.allan@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's equivalent to __printf, so prefer __scanf.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce prio_set_parent() to abstract the operation which is used to
attach the node to its parent.
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In current code, the deleted-node is recorded from first to last,
actually, we can directly attach these node on 'node' we will insert as
the left child, it can let the code more readable.
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce iter_walk_down()/iter_walk_up() to remove the common code
between prio_tree_left() and prio_tree_right().
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove the code since 'node' has already been initialized in the begin of
the function
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- Generate a 64-bit pattern more efficiently

memchr_inv needs to generate a 64-bit pattern filled with a target
character.  The operation can be done by more efficient way.

- Don't call the slow check_bytes() if the memory area is 64-bit aligned

memchr_inv compares contiguous 64-bit words with the 64-bit pattern as
much as possible.  The outside of the region is checked by check_bytes()
that scans for each byte.  Unfortunately, the first 64-bit word is
unexpectedly scanned by check_bytes() even if the memory area is aligned
to a 64-bit boundary.

Both changes were originally suggested by Eric Dumazet.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Suggested-by: NEric Dumazet <eric.dumazet@gmail.com>
Cc: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After moving some core functions to led-core.c, led-class.c can be built
as module again.
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>
Acked-by: NRichard Purdie <richard.purdie@linuxfoundation.org>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Improve the readability by moving the code setting gen_config to one
place.

[akpm@linux-foundation.org: fix some patch skew]
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Cc: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com>
Cc: "Milo(Woogyom) Kim" <milo.kim@ti.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Cc: Peter Meerwald <p.meerwald@bct-electronic.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use 'pdata' rather than 'pltfm' in lm3530_init_registers().
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Axel Lin <axel.lin@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

LM3530_ALS_ZONE_REG is read-only register.
Writing this register is not necessary.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* add 'struct lm3530_pwm_data' in the platform data
  The pwm data is the platform specific functions which generate the pwm.
  The pwm data is only valid when brightness is pwm input mode.
  Functions should be implemented by the pwm driver.
  pwm_set_intensity() : set duty of pwm.
  pwm_get_intensity() : get current the brightness.

* brightness control by pwm
  If the control mode is pwm, then brightness is changed by the duty of
  pwm=.  So pwm platform function should be called in lm3530_brightness_set().

* do not update brightness register when pwm input mode
  In pwm input mode, brightness register is not used.
  If any value is updated in this register, then the led will be off.

* when input mode is changed, set duty of pwm to 0 if unnecessary.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

To get members of lm3530_data, use 'struct led_classdev' rather than
'struct i2c_client'.

[akpm@linux-foundation.org: fix 80-column fixes more nicely]
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Only 7 bits are used for updating the brightness.  (register address :
A0h) So the max_brightness property of lm3530 should be set to 127.

On initializing registers, maximum initial brightness is limited to
'max_brightness'.

Division-by-two is removed on updating the brightness.  This arithmetic is
not necessary because the range of brightness is 0 ~ 127= .
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Direct usage of the asm include has long been deprecated by the
introduction of gpiolib.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Driver for the PCA9633 I2C chip supporting four LEDs and 255 brightness
levels.

[akpm@linux-foundation.org: fix kcalloc() call]
[axel.lin@gmail.com: fix kcalloc parameters swapped]
Signed-off-by: NPeter Meerwald <p.meerwald@bct-electronic.com>
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Saves ~50 bytes text and speeds things up.

Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix it by assigning the lp5521_read return value.
Signed-off-by: Nsrinidhi kasagar <srinidhi.kasagar@stericsson.com>
Cc: Milo(Woogyom) Kim <milo.kim@ti.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Arun MURTHY <arun.murthy@stericsson.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For better readability, values of LP5521_REG_ENABLE register were
redefined= .  Additional definitions: LP5521_ENABLE_DEFAULT and
LP5521_ENABLE_RUN_PROGRAM= .

Use definition rather than hard code value.
: 0x3F -> 'LP5521_CMD_DIRECT'
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Cc: Arun MURTHY <arun.murthy@stericsson.com>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The lp5521 has autonomous operation mode without external control.
Using lp5521_platform_data, various led patterns can be configurable.
For supporting this feature, new functions and device attribute are
added.

Structure of lp5521_led_pattern: 3 channels are supported - red, green
and blue.  Pattern(s) of each channel and numbers of pattern(s) are
defined in the pla= tform data.  Pattern data are hexa codes which
include pattern commands such like set pwm, wait, ramp up/down, branch
and so on.

Pattern mode functions:
 * lp5521_clear_program_memory
	Before running new led pattern, program memory should be cleared.
 * lp5521_write_program_memory
	Pattern data updated in the program memory via the i2c.
 * lp5521_get_pattern
	Get pattern from predefined in the platform data.
 * lp5521_run_led_pattern
	Stop current pattern or run new pattern.
	Transition time is required between different operation mode.

Device attribute - 'led_pattern': To load specific led pattern, new device
attribute is added.

When the lp5521 driver is unloaded, stop current led pattern mode.

Documentation updated : description about how to define the led patterns
and example.

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Cc: Arun MURTHY <arun.murthy@stericsson.com>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The value of CONFIG register(Addr 08h) is configurable.  For supporting
this feature, update_config is added in the platform data.  If
'update_config' is not defined, the default value is 'LP5521_PWRSAVE_EN |
LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT'.

To define CONFIG register in the platform data, the bit definitions were
mo= ved to the header file.

Documentation updated : description about 'update_config' and example.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Cc: Arun MURTHY <arun.murthy@stericsson.com>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The name of each led channel can be configurable.  For the compatibility,
the name is set to default value(xx:channelN) when 'name' is not defined.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Cc: Arun MURTHY <arun.murthy@stericsson.com>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A few new i2c-drivers came into the kernel which clear the
clientdata-pointer on exit or error.  This is obsolete meanwhile, the
core will do it.
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Cc: NeilBrown <neilb@suse.de>
Cc: Richard Purdie <rpurdie@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Just a small tidy-up.

1) There is a NULL dereference if the tca allocation fails.
2) The call to cancel_work_sync() isn't needed because we haven't
   scheduled any work.
3) The call to i2c_set_clientdata() isn't needed because the core
   handles that automatically if probe() fails.
4) I added some curly braces for style reasons.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Acked-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

"reseting" -> "resetting"
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use for_each_clear_bit() to iterate over all the cleared bit in a
memory region.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use for_each_clear_bit() to iterate over all the cleared bit in a
memory region.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Stefano Panella <stefano.panella@csr.com>
Cc: David Vrabel <david.vrabel@csr.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use for_each_clear_bit() to iterate over all the cleared bit in a
memory region.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use for_each_clear_bit() to iterate over all the cleared bit in a
memory region.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce for_each_clear_bit() and for_each_clear_bit_from().  They are
similar to for_each_set_bit() and list_for_each_set_bit_from(), but they
iterate over all the cleared bits in a memory region.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Stefano Panella <stefano.panella@csr.com>
Cc: David Vrabel <david.vrabel@csr.com>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>