- 17 3月, 2017 11 次提交
-
-
由 Stephen Hemminger 提交于
Compiling with warnings enabled finds missing prototype for hv_do_hypercall. Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Stephen Hemminger 提交于
The change to reschedule tasklet if more data arrives in ring buffer can cause performance regression if host timing is such that the next response happens in small window. Go back to a modified version of the original looping behavior. If the race occurs in a small time, then loop. But if the tasklet has been running for a long interval due to flood, then reschedule the tasklet to allow migration to ksoftirqd. Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Moritz Fischer 提交于
Replaces open-coded list_for_each() + list_entry() with macro list_for_each_entry() Signed-off-by: NMoritz Fischer <mdf@kernel.org> Cc: linux-fpga@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: NAlan Tull <atull@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Joel Holdsworth 提交于
This patch adds support to the FPGA manager for configuring the SRAM of iCE40LM, iCE40LP, iCE40HX, iCE40 Ultra, iCE40 UltraLite and iCE40 UltraPlus devices, through slave SPI. Signed-off-by: NJoel Holdsworth <joel@airwebreathe.org.uk> Reviewed-by: NMarek Vasut <marex@denx.de> Reviewed-by: NMoritz Fischer <moritz.fischer@ettus.com> Acked-by: NAlan Tull <atull@opensource.altera.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Joel Holdsworth 提交于
This adds documentation of the device tree bindings of the Lattice iCE40 FPGA driver for the FPGA manager framework. Signed-off-by: NJoel Holdsworth <joel@airwebreathe.org.uk> Acked-by: NRob Herring <robh@kernel.org> Acked-by: NAlan Tull <atull@opensource.altera.com> Acked-by: NMoritz Fischer <moritz.fischer@ettus.com> Acked-by: NMarek Vasut <marex@denx.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Florian Fainelli 提交于
Register the TS-7300 FPGA manager device drivers which allows us to load bitstreams into the on-board Altera Cyclone II FPGA. Acked-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Acked-by: NAlan Tull <atull@opensource.altera.com> Acked-by: NMoritz Fischer <moritz.fischer@ettus.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Florian Fainelli 提交于
Add support for loading bitstreams on the Altera Cyclone II FPGA populated on the TS-7300 board. This is done through the configuration and data registers offered through a memory interface between the EP93xx SoC and the FPGA via an intermediate CPLD device. The EP93xx SoC on the TS-7300 does not have direct means of configuring the on-board FPGA other than by using the special memory mapped interface to the CPLD. No other entity on the system can control the FPGA bitstream. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Acked-by: NAlan Tull <atull@opensource.altera.com> Acked-by: NMoritz Fischer <moritz.fischer@ettus.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Moritz Fischer 提交于
Add fpga-region property to allow passing the fact that the bitstream is encrypted to the fpga-region and ultimately to the low-level driver. Signed-off-by: NMoritz Fischer <mdf@kernel.org> Acked-by: NMichal Simek <michal.simek@xilinx.com> Signed-off-by: NAlan Tull <atull@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Moritz Fischer 提交于
Add support for encrypted bitstreams. For this to work the system must be booted in secure mode. In order for on-the-fly decryption to work, the PCAP clock rate needs to be lowered via the PCAP_RATE_EN bit. Signed-off-by: NMoritz Fischer <mdf@kernel.org> Acked-by: NMichal Simek <michal.simek@xilinx.com> Signed-off-by: NAlan Tull <atull@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Moritz Fischer 提交于
Add a flag that is passed to the write_init() callback, indicating that the bitstream is encrypted. The low-level driver will deal with the flag, or return an error, if encrypted bitstreams are not supported. Signed-off-by: NMoritz Fischer <mdf@kernel.org> Acked-by: NMichal Simek <michal.simek@xilinx.com> Signed-off-by: NAlan Tull <atull@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Dinh Nguyen 提交于
Fix up these sparse warnings: drivers/fpga/fpga-mgr.c:189:21: warning: symbol '__fpga_mgr_get' was not declared. Should it be static? drivers/fpga/fpga-bridge.c:30:12: warning: symbol 'bridge_list_lock' was not declared. Should it be static? Signed-off-by: NDinh Nguyen <dinguyen@kernel.org> Acked-by: NMoritz Fischer <mdf@kernel.org> Signed-off-by: NAlan Tull <atull@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 13 3月, 2017 4 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 fixes from Martin Schwidefsky: - four patches to get the new cputime code in shape for s390 - add the new statx system call - a few bug fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: wire up statx system call KVM: s390: Fix guest migration for huge guests resulting in panic s390/ipl: always use load normal for CCW-type re-IPL s390/timex: micro optimization for tod_to_ns s390/cputime: provide archicture specific cputime_to_nsecs s390/cputime: reset all accounting fields on fork s390/cputime: remove last traces of cputime_t s390: fix in-kernel program checks s390/crypt: fix missing unlock in ctr_paes_crypt on error path
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Thomas Gleixner: - a fix for the kexec/purgatory regression which was introduced in the merge window via an innocent sparse fix. We could have reverted that commit, but on deeper inspection it turned out that the whole machinery is neither documented nor robust. So a proper cleanup was done instead - the fix for the TLB flush issue which was discovered recently - a simple typo fix for a reboot quirk * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tlb: Fix tlb flushing when lguest clears PGE kexec, x86/purgatory: Unbreak it and clean it up x86/reboot/quirks: Fix typo in ASUS EeeBook X205TA reboot quirk
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq fixes from Thomas Gleixner: - a workaround for a GIC erratum - a missing stub function for CONFIG_IRQDOMAIN=n - fixes for a couple of type inconsistencies * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/crossbar: Fix incorrect type of register size irqchip/gicv3-its: Add workaround for QDF2400 ITS erratum 0065 irqdomain: Add empty irq_domain_check_msi_remap irqchip/crossbar: Fix incorrect type of local variables
-
- 12 3月, 2017 5 次提交
-
-
由 Daniel Borkmann 提交于
Fengguang reported random corruptions from various locations on x86-32 after commits d2852a22 ("arch: add ARCH_HAS_SET_MEMORY config") and 9d876e79 ("bpf: fix unlocking of jited image when module ronx not set") that uses the former. While x86-32 doesn't have a JIT like x86_64, the bpf_prog_lock_ro() and bpf_prog_unlock_ro() got enabled due to ARCH_HAS_SET_MEMORY, whereas Fengguang's test kernel doesn't have module support built in and therefore never had the DEBUG_SET_MODULE_RONX setting enabled. After investigating the crashes further, it turned out that using set_memory_ro() and set_memory_rw() didn't have the desired effect, for example, setting the pages as read-only on x86-32 would still let probe_kernel_write() succeed without error. This behavior would manifest itself in situations where the vmalloc'ed buffer was accessed prior to set_memory_*() such as in case of bpf_prog_alloc(). In cases where it wasn't, the page attribute changes seemed to have taken effect, leading to the conclusion that a TLB invalidate didn't happen. Moreover, it turned out that this issue reproduced with qemu in "-cpu kvm64" mode, but not for "-cpu host". When the issue occurs, change_page_attr_set_clr() did trigger a TLB flush as expected via __flush_tlb_all() through cpa_flush_range(), though. There are 3 variants for issuing a TLB flush: invpcid_flush_all() (depends on CPU feature bits X86_FEATURE_INVPCID, X86_FEATURE_PGE), cr4 based flush (depends on X86_FEATURE_PGE), and cr3 based flush. For "-cpu host" case in my setup, the flush used invpcid_flush_all() variant, whereas for "-cpu kvm64", the flush was cr4 based. Switching the kvm64 case to cr3 manually worked fine, and further investigating the cr4 one turned out that X86_CR4_PGE bit was not set in cr4 register, meaning the __native_flush_tlb_global_irq_disabled() wrote cr4 twice with the same value instead of clearing X86_CR4_PGE in the first write to trigger the flush. It turned out that X86_CR4_PGE was cleared from cr4 during init from lguest_arch_host_init() via adjust_pge(). The X86_FEATURE_PGE bit is also cleared from there due to concerns of using PGE in guest kernel that can lead to hard to trace bugs (see bff672e6 ("lguest: documentation V: Host") in init()). The CPU feature bits are cleared in dynamic boot_cpu_data, but they never propagated to __flush_tlb_all() as it uses static_cpu_has() instead of boot_cpu_has() for testing which variant of TLB flushing to use, meaning they still used the old setting of the host kernel. Clearing via setup_clear_cpu_cap(X86_FEATURE_PGE) so this would propagate to static_cpu_has() checks is too late at this point as sections have been patched already, so for now, it seems reasonable to switch back to boot_cpu_has(X86_FEATURE_PGE) as it was prior to commit c109bf95 ("x86/cpufeature: Remove cpu_has_pge"). This lets the TLB flush trigger via cr3 as originally intended, properly makes the new page attributes visible and thus fixes the crashes seen by Fengguang. Fixes: c109bf95 ("x86/cpufeature: Remove cpu_has_pge") Reported-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Cc: bp@suse.de Cc: Kees Cook <keescook@chromium.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: lkp@01.org Cc: Laura Abbott <labbott@redhat.com> Cc: stable@vger.kernel.org Link: http://lkml.kernrl.org/r/20170301125426.l4nf65rx4wahohyl@wfg-t540p.sh.intel.com Link: http://lkml.kernel.org/r/25c41ad9eca164be4db9ad84f768965b7eb19d9e.1489191673.git.daniel@iogearbox.netSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fixes from Radim Krčmář: "ARM updates from Marc Zyngier: - vgic updates: - Honour disabling the ITS - Don't deadlock when deactivating own interrupts via MMIO - Correctly expose the lact of IRQ/FIQ bypass on GICv3 - I/O virtualization: - Make KVM_CAP_NR_MEMSLOTS big enough for large guests with many PCIe devices - General bug fixes: - Gracefully handle exception generated with syndroms that the host doesn't understand - Properly invalidate TLBs on VHE systems x86: - improvements in emulation of VMCLEAR, VMX MSR bitmaps, and VCPU reset * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: nVMX: do not warn when MSR bitmap address is not backed KVM: arm64: Increase number of user memslots to 512 KVM: arm/arm64: Remove KVM_PRIVATE_MEM_SLOTS definition that are unused KVM: arm/arm64: Enable KVM_CAP_NR_MEMSLOTS on arm/arm64 KVM: Add documentation for KVM_CAP_NR_MEMSLOTS KVM: arm/arm64: VGIC: Fix command handling while ITS being disabled arm64: KVM: Survive unknown traps from guests arm: KVM: Survive unknown traps from guests KVM: arm/arm64: Let vcpu thread modify its own active state KVM: nVMX: reset nested_run_pending if the vCPU is going to be reset kvm: nVMX: VMCLEAR should not cause the vCPU to shut down KVM: arm/arm64: vgic-v3: Don't pretend to support IRQ/FIQ bypass arm64: KVM: VHE: Clear HCR_TGE when invalidating guest TLBs
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux由 Linus Torvalds 提交于
Pull extable.h fix from Paul Gortmaker: "Fixup for arch/score after extable.h introduction. It seems that Guenter is the only one on the planet doing builds for arch/score -- we don't have compile coverage for it in linux-next or in the kbuild-bot either. Guenter couldn't even recall where he got his toolchain, but was kind enough to share it with me so I could validate this change and also add arch/score to my build coverage. I sat on this a bit in case there was any other fallout in other arch dirs, but since this still seems to be the only one, I might as well send it on its way" * tag 'extable-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: score: Fix implicit includes now failing build after extable change
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random由 Linus Torvalds 提交于
Pull random updates from Ted Ts'o: "Change get_random_{int,log} to use the CRNG used by /dev/urandom and getrandom(2). It's faster and arguably more secure than cut-down MD5 that we had been using. Also do some code cleanup" * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: move random_min_urandom_seed into CONFIG_SYSCTL ifdef block random: convert get_random_int/long into get_random_u32/u64 random: use chacha20 for get_random_int/long random: fix comment for unused random_min_urandom_seed random: remove variable limit random: remove stale urandom_init_wait random: remove stale maybe_reseed_primary_crng
-
由 Guenter Roeck 提交于
After changing from module.h to extable.h, score builds fail with: arch/score/kernel/traps.c: In function 'do_ri': arch/score/kernel/traps.c:248:4: error: implicit declaration of function 'user_disable_single_step' arch/score/mm/extable.c: In function 'fixup_exception': arch/score/mm/extable.c:32:38: error: dereferencing pointer to incomplete type arch/score/mm/extable.c:34:24: error: dereferencing pointer to incomplete type because extable.h doesn't drag in the same amount of headers as the module.h did. Add in the headers which were implicitly expected. Fixes: 90858794 ("module.h: remove extable.h include now users have migrated") Signed-off-by: NGuenter Roeck <linux@roeck-us.net> [PG: tweak commit log; refresh for sched header refactoring.] Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 11 3月, 2017 10 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull tty/serial fixes frpm Greg KH: "Here are two bugfixes for tty stuff for 4.11-rc2. One of them resolves the pretty bad bug in the n_hdlc code that Alexander Popov found and fixed and has been reported everywhere. The other just fixes a samsung serial driver issue when DMA fails on some systems. Both have been in linux-next with no reported issues" * tag 'tty-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: samsung: Continue to work if DMA request fails tty: n_hdlc: get rid of racy n_hdlc.tbuf
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging driver fixes from Greg KH: "Here are two small build warning fixes for some staging drivers that Arnd has found on his valiant quest to get the kernel to build properly with no warnings. Both of these have been in linux-next this week and resolve the reported issues" * tag 'staging-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: octeon: remove unused variable staging/vc04_services: add CONFIG_OF dependency
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg KH: "Here is a number of different USB fixes for 4.11-rc2. Seems like there were a lot of unresolved issues that people have been finding for this subsystem, and a bunch of good security auditing happening as well from Johan Hovold. There's the usual batch of gadget driver fixes and xhci issues resolved as well. All of these have been in linux-next with no reported issues" * tag 'usb-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits) usb: host: xhci-plat: Fix timeout on removal of hot pluggable xhci controllers usb: host: xhci-dbg: HCIVERSION should be a binary number usb: xhci: remove dummy extra_priv_size for size of xhci_hcd struct usb: xhci-mtk: check hcc_params after adding primary hcd USB: serial: digi_acceleport: fix OOB-event processing MAINTAINERS: usb251xb: remove reference inexistent file doc: dt-bindings: usb251xb: mark reg as required usb: usb251xb: dt: add unit suffix to oc-delay and power-on-time usb: usb251xb: remove max_{power,current}_{sp,bp} properties usb-storage: Add ignore-residue quirk for Initio INIC-3619 USB: iowarrior: fix NULL-deref in write USB: iowarrior: fix NULL-deref at probe usb: phy: isp1301: Add OF device ID table usb: ohci-at91: Do not drop unhandled USB suspend control requests USB: serial: safe_serial: fix information leak in completion handler USB: serial: io_ti: fix information leak in completion handler USB: serial: omninet: drop open callback USB: serial: omninet: fix reference leaks at open USB: serial: io_ti: fix NULL-deref in interrupt callback usb: dwc3: gadget: make to increment req->remaining in all cases ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl由 Linus Torvalds 提交于
Pull pinctrl fixes from Linus Walleij: "Two smaller pin control fixes for the v4.11 series: - Add a get_direction() function to the qcom driver - Fix two pin names in the uniphier driver" * tag 'pinctrl-v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: uniphier: change pin names of aio/xirq for LD11 pinctrl: qcom: add get_direction function
-
由 Thomas Gleixner 提交于
The purgatory code defines global variables which are referenced via a symbol lookup in the kexec code (core and arch). A recent commit addressing sparse warnings made these static and thereby broke kexec_file. Why did this happen? Simply because the whole machinery is undocumented and lacks any form of forward declarations. The variable names are unspecific and lack a prefix, so adding forward declarations creates shadow variables in the core code. Aside of that the code relies on magic constants and duplicate struct definitions with no way to ensure that these things stay in sync. The section placement of the purgatory variables happened by chance and not by design. Unbreak kexec and cleanup the mess: - Add proper forward declarations and document the usage - Use common struct definition - Use the proper common defines instead of magic constants - Add a purgatory_ prefix to have a proper name space - Use ARRAY_SIZE() instead of a homebrewn reimplementation - Add proper sections to the purgatory variables [ From Mike ] Fixes: 72042a8c ("x86/purgatory: Make functions and variables static") Reported-by: NMike Galbraith <<efault@gmx.de> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Nicholas Mc Guire <der.herr@hofr.at> Cc: Borislav Petkov <bp@alien8.de> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: "Tobin C. Harding" <me@tobin.cc> Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1703101315140.3681@nanosSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
git://github.com/ceph/ceph-client由 Linus Torvalds 提交于
Pull ceph fixes from Ilya Dryomov: - a fix for the recently discovered misdirected requests bug present in jewel and later on the server side and all stable kernels - a fixup for -rc1 CRUSH changes - two usability enhancements: osd_request_timeout option and supported_features bus attribute. * tag 'ceph-for-4.11-rc2' of git://github.com/ceph/ceph-client: libceph: osd_request_timeout option rbd: supported_features bus attribute libceph: don't set weight to IN when OSD is destroyed libceph: fix crush_decode() for older maps
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c fixes from Wolfram Sang: "Here are some driver bugfixes from I2C. Unusual this time are the two reverts. One because I accidently picked a patch from the list which I should have pulled from my co-maintainer instead ("missing of_node_put"). And one which I wrongly assumed to be an easy fix but it turned out already that it needs more iterations ("copy device properties")" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: Revert "i2c: copy device properties when using i2c_register_board_info()" Revert "i2c: add missing of_node_put in i2c_mux_del_adapters" i2c: exynos5: Avoid transaction timeouts due TRANSFER_DONE_AUTO not set i2c: designware: add reset interface i2c: meson: fix wrong variable usage in meson_i2c_put_data i2c: copy device properties when using i2c_register_board_info() i2c: m65xx: drop superfluous quirk structure i2c: brcmstb: Fix START and STOP conditions i2c: add missing of_node_put in i2c_mux_del_adapters i2c: riic: fix restart condition i2c: add missing of_node_put in i2c_mux_del_adapters
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Intel, amd and mxsfb fixes. These are the drm fixes I've collected for rc2. Mostly i915 GVT only fixes, along with a single EDID fix, some mxsfb fixes and a few minor amd fixes" * tag 'drm-fixes-for-4.11-rc2' of git://people.freedesktop.org/~airlied/linux: (38 commits) drm: mxsfb: Implement drm_panel handling drm: mxsfb_crtc: Fix the framebuffer misplacement drm: mxsfb: Fix crash when provided invalid DT bindings drm: mxsfb: fix pixel clock polarity drm: mxsfb: use bus_format to determine LCD bus width drm/amdgpu: bump driver version for some new features drm/amdgpu: validate paramaters in the gem ioctl drm/amd/amdgpu: fix console deadlock if late init failed drm/i915/gvt: change some gvt_err to gvt_dbg_cmd drm/i915/gvt: protect RO and Rsvd bits of virtual vgpu configuration space drm/i915/gvt: handle workload lifecycle properly drm/edid: Add EDID_QUIRK_FORCE_8BPC quirk for Rotel RSX-1058 drm/i915/gvt: fix an error for F_RO flag drm/i915/gvt: use pfn_valid for better checking drm/i915/gvt: set SFUSE_STRAP properly for vitual monitor detection drm/i915/gvt: fix an error for one register drm/i915/gvt: add more registers into handlers list drm/i915/gvt: have more registers with F_CMD_ACCESS flags set drm/i915/gvt: add some new MMIOs to cmd_access white list drm/i915/gvt: fix pcode mailbox write emulation of BDW ...
-
由 Linus Torvalds 提交于
Merge 5-level page table prep from Kirill Shutemov: "Here's relatively low-risk part of 5-level paging patchset. Merging it now will make x86 5-level paging enabling in v4.12 easier. The first patch is actually x86-specific: detect 5-level paging support. It boils down to single define. The rest of patchset converts Linux MMU abstraction from 4- to 5-level paging. Enabling of new abstraction in most cases requires adding single line of code in arch-specific code. The rest is taken care by asm-generic/. Changes to mm/ code are mostly mechanical: add support for new page table level -- p4d_t -- where we deal with pud_t now. v2: - fix build on microblaze (Michal); - comment for __ARCH_HAS_5LEVEL_HACK in kasan_populate_zero_shadow(); - acks from Michal" * emailed patches from Kirill A Shutemov <kirill.shutemov@linux.intel.com>: mm: introduce __p4d_alloc() mm: convert generic code to 5-level paging asm-generic: introduce <asm-generic/pgtable-nop4d.h> arch, mm: convert all architectures to use 5level-fixup.h asm-generic: introduce __ARCH_USE_5LEVEL_HACK asm-generic: introduce 5level-fixup.h x86/cpufeature: Add 5-level paging detection
-
由 Linus Torvalds 提交于
Merge fixes from Andrew Morton: "26 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (26 commits) userfaultfd: remove wrong comment from userfaultfd_ctx_get() fat: fix using uninitialized fields of fat_inode/fsinfo_inode sh: cayman: IDE support fix kasan: fix races in quarantine_remove_cache() kasan: resched in quarantine_remove_cache() mm: do not call mem_cgroup_free() from within mem_cgroup_alloc() thp: fix another corner case of munlock() vs. THPs rmap: fix NULL-pointer dereference on THP munlocking mm/memblock.c: fix memblock_next_valid_pfn() userfaultfd: selftest: vm: allow to build in vm/ directory userfaultfd: non-cooperative: userfaultfd_remove revalidate vma in MADV_DONTNEED userfaultfd: non-cooperative: fix fork fctx->new memleak mm/cgroup: avoid panic when init with low memory drivers/md/bcache/util.h: remove duplicate inclusion of blkdev.h mm/vmstats: add thp_split_pud event for clarity include/linux/fs.h: fix unsigned enum warning with gcc-4.2 userfaultfd: non-cooperative: release all ctx in dup_userfaultfd_complete userfaultfd: non-cooperative: robustness check userfaultfd: non-cooperative: rollback userfaultfd_exit x86, mm: unify exit paths in gup_pte_range() ...
-
- 10 3月, 2017 10 次提交
-
-
由 Matjaz Hegedic 提交于
The reboot quirk for ASUS EeeBook X205TA contains a typo in DMI_PRODUCT_NAME, improperly referring to X205TAW instead of X205TA, which prevents the quirk from being triggered. The model X205TAW already has a reboot quirk of its own. This fix simply removes the inappropriate final letter W. Fixes: 90b28ded ("x86/reboot/quirks: Add ASUS EeeBook X205TA reboot quirk") Signed-off-by: NMatjaz Hegedic <matjaz.hegedic@gmail.com> Link: http://lkml.kernel.org/r/1489064417-7445-1-git-send-email-matjaz.hegedic@gmail.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linux由 Linus Torvalds 提交于
Pull xfs fixes from Darrick Wong: "Here are some bug fixes for -rc2 to clean up the copy on write handling and to remove a cause of hangs. - Fix various iomap bugs - Fix overly aggressive CoW preallocation garbage collection - Fixes to CoW endio error handling - Fix some incorrect geometry calculations - Remove a potential system hang in bulkstat - Try to allocate blocks more aggressively to reduce ENOSPC errors" * tag 'xfs-4.11-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: try any AG when allocating the first btree block when reflinking xfs: use iomap new flag for newly allocated delalloc blocks xfs: remove kmem_zalloc_greedy xfs: Use xfs_icluster_size_fsb() to calculate inode alignment mask xfs: fix and streamline error handling in xfs_end_io xfs: only reclaim unwritten COW extents periodically iomap: invalidate page caches should be after iomap_dio_complete() in direct write
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux由 Linus Torvalds 提交于
Pull gcc-plugins fix from Kees Cook: "Fixes a typo in sancov plugin, exposed in earlier compiler versions" * tag 'gcc-plugins-v4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: fix sancov_plugin for gcc-5
-
由 Fabio Estevam 提交于
Currently when the 'power-supply' regulator is passed via device tree it does not actually work since drm_panel_prepare()/drm_panel_enable() are never called. Quoting Thierry Reding: "It should really call drm_panel_prepare() and drm_panel_enable() while switching on the display pipeline and drm_panel_disable(), followed by drm_panel_unprepare() while switching off the display pipeline." So do as suggested, so that the 'power-supply' regulator can be functional. Reported-by: NBreno Lima <breno.lima@nxp.com> Suggested-by: NThierry Reding <thierry.reding@gmail.com> Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com> Tested-by: NMarek Vasut <marex@denx.de> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Fabio Estevam 提交于
Currently the framebuffer content is displayed with incorrect offsets in both the vertical and horizontal directions. The fbdev version of the driver does not show this problem. Breno Lima dumped the eLCDIF controller registers on both the drm and fbdev drivers and noticed that the VDCTRL3 register is configured incorrectly in the drm driver. The fbdev driver calculates the vertical and horizontal wait counts of the VDCTRL3 register by doing: back porch + sync length. Looking at the horizontal and vertical timing diagram from include/drm/drm_modes.h this value corresponds to: crtc_[hv]total - crtc_[hv]sync_start So fix the VDCTRL3 register setting accordingly so that the eLCDIF controller can properly show the framebuffer content in the correct position. Reported-by: NBreno Lima <breno.lima@nxp.com> Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com> Tested-by: NBreno Lima <breno.lima@nxp.com> Tested-by: NMarek Vasut <marex@denx.de> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Marek Vasut 提交于
The mxsfb driver will crash if the mxsfb DT node has a subnode, but the content of the subnode is not of-graph binding with an endpoint linking to panel. The crash was triggered by providing old-style panel bindings to the mxsfb driver instead of the new of-graph ones. The problem happens in mxsfb_create_output(), which is invoked from mxsfb_load(). The mxsfb_create_output() iterates over all mxsfb DT subnode endpoints and tries to bind a panel on each endpoint. If there is any problem binding the panel, that is, mxsfb->panel == NULL, this function will return an error code, otherwise success 0 is returned. If the subnodes do not specify of-graph binding with an endpoint, the iteration over endpoints in mxsfb_create_output() will have zero cycles and the function will immediatelly return 0, but the mxsfb->panel will remain NULL. This is propagated back into the mxsfb_load(), which does not detect any problem and expects that the mxsfb->panel is valid, thus calls mxsfb_panel_attach(). But since mxsfb->panel == NULL, mxsfb_panel_attach() is called with first argument NULL and this crashes the kernel. This patch fixes the problem by explicitly checking for valid mxsfb->panel at the end of the iteration in mxsfb_create_output(). Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Breno Matheus Lima <brenomatheus@gmail.com> Tested-by: NBreno Lima <breno.lima@nxp.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Stefan Agner 提交于
The DRM subsystem specifies the pixel clock polarity from a controllers perspective: DRM_BUS_FLAG_PIXDATA_NEGEDGE means the controller drives the data on pixel clocks falling edge. That is the controllers DOTCLK_POL=0 (Default is data launched at negative edge). Also change the data enable logic to be high active by default and only change if explicitly requested via bus_flags. With that defaults are: - Data enable: high active - Pixel clock polarity: controller drives data on negative edge Signed-off-by: NStefan Agner <stefan@agner.ch> Acked-by: NMarek Vasut <marex@denx.de> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Stefan Agner 提交于
The LCD bus width does not need to align with the pixel format. The LCDIF controller automatically converts between pixel formats and bus width by padding or dropping LSBs. The DRM subsystem has the notion of bus_format which allows to determine what bus_formats are supported by the display. Choose the first available or fallback to 24 bit if none are available. Signed-off-by: NStefan Agner <stefan@agner.ch> Acked-by: NMarek Vasut <marex@denx.de> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
* 'drm-fixes-4.11' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: bump driver version for some new features drm/amdgpu: validate paramaters in the gem ioctl drm/amd/amdgpu: fix console deadlock if late init failed
-
由 Dave Airlie 提交于
Merge tag 'drm-intel-fixes-2017-03-09' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes flushing out gvt-g fixes * tag 'drm-intel-fixes-2017-03-09' of git://anongit.freedesktop.org/git/drm-intel: (29 commits) drm/i915/gvt: change some gvt_err to gvt_dbg_cmd drm/i915/gvt: protect RO and Rsvd bits of virtual vgpu configuration space drm/i915/gvt: handle workload lifecycle properly drm/i915/gvt: fix an error for F_RO flag drm/i915/gvt: use pfn_valid for better checking drm/i915/gvt: set SFUSE_STRAP properly for vitual monitor detection drm/i915/gvt: fix an error for one register drm/i915/gvt: add more registers into handlers list drm/i915/gvt: have more registers with F_CMD_ACCESS flags set drm/i915/gvt: add some new MMIOs to cmd_access white list drm/i915/gvt: fix pcode mailbox write emulation of BDW drm/i915/gvt: add resolution definition for vGPU type drm/i915/gvt: Add more edid definition support drm/i915/gvt: adjust to fixed vGPU types drm/i915/gvt: remove unnecessary error msg from gtt write drm/i915/gvt: refine pcode write emulation drm/i915/gvt: clear the vGPU reset logic drm/i915/gvt: decrease priority of output msg for untracked mmio drm/i915/gvt: set default value to 0 for unhandled mmio regs drm/i915/gvt: add cmd_access to GEN7_HALF_SLICE_CHICKEN1 ...
-