- 20 6月, 2014 2 次提交
-
-
由 Kamil Krawczyk 提交于
Some AQ debug prints needs be moved around or do additional checks so they will not cause our tool applications to cause segmentation faults. The tools run in user space and we need to correctly reference kernel space memory. Change-ID: Ia2ac4076f576b805f350453fd50ad69c2a91ab9a Signed-off-by: NKamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Michal Kosiarz 提交于
Reset head and tail on admin queue initialization where H/T are not reset by HW. Change-ID: I6db8a2dd3f05ce66410a92cce016191add04760e Signed-off-by: NMichal Kosiarz <michal.kosiarz@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 06 6月, 2014 1 次提交
-
-
由 Kamil Krawczyk 提交于
B0 Si blocks AQ registers when in Blank Flash mode - write is dropped, read gives 0xDEADBEEF. Introduce a simple check for a correct value in one of the AQ registers to be sure that AQ was configured correctly. Without this check we get into an endless loop while trying to send GetVersion AQ cmd. Change-ID: I00102b8c5fa6c16d14289be677aafadf87f10f0d Signed-off-by: NKamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 29 5月, 2014 1 次提交
-
-
由 Shannon Nelson 提交于
As long as the Firmware isn't reporting a higher API major version number than what the driver knows about, the driver does not need to worry as much about greater minor numbers. The API changes minor numbers when things get added to the API, but no existing structs or calls are changed. The driver has the option of warning that the minor numbers don't match. This will allow a little more flexibility in handling newer NICs and NVMs in the field. Change-ID: I5302acd2d147a2992328991ee7223b2ff39c8741 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 22 4月, 2014 1 次提交
-
-
由 Shannon Nelson 提交于
The NVM updates take some time and are asynchronous actions that signal their completion with an AdminQ event. This code tracks when there is an NVM update outstanding and won't allow a new update command until a completion event is received from the current update. Change-ID: Ic132fe16bd9dc09b002ed38297a877c1a01553ce Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Acked-by: NMitch Williams <mitch.a.williams@intel.com> Acked-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 14 2月, 2014 1 次提交
-
-
由 Mitch Williams 提交于
As politely pointed out by Dave Miller, calls to memset do not need a void pointer cast. Additionally, it is preferred to use sizeof(*the actual object) instead of sizeof(type). Change-ID: Id6a02429b7040111531f3865ea03fbe619167cb3 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NKevin Scott <kevin.c.scott@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 1月, 2014 2 次提交
-
-
由 Jeff Kirsher 提交于
These changes make Doxygen/kdoc work correctly without warnings. Change-ID: I2941f38860be805ff7548d84dae35754c83f1d62 Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com>
-
由 Mitch Williams 提交于
These instances were found by coccinelle/spatch, and can use struct assignment instead of memcpy. Change-ID: Idc23c3599241bf8a658bda18c80417af3fbfee66 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 09 1月, 2014 3 次提交
-
-
由 Shannon Nelson 提交于
Since nearly everything we do is synchronous, using the interrupt-on-error bit is unnecessary and causing unneeded interrupts. If anyone wants to use the bit they can turn it on in individual AQ requests using the cmd_details parameter. Change-ID: I4690a9c561d3e0836aeadb4f88f8a8702b1d1366 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Call AQ to release any reservation held by this PF on the NVM resource lock on startup, in order to clear anything that might have been left over from a previous run. The lock is only cleared by the requestor calling for it to be cleared, on power-on, or firmware reset. This should help limit the need for rebooting a customer machine if something goes wrong on a firmware update or some other action. Change-ID: I8c8473e601d4ef512dda7baa77a6e75f2e5fea49 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
The GPL header included in each file in the i40e driver doesn't need to include the "this program" text since this driver is already part of the larger kernel. Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 08 1月, 2014 4 次提交
-
-
由 Mitch Williams 提交于
When cleaning descriptors, we must set up ALL fields, not just the DMA address. The initial setup does this correctly, but not the cleanup code, so the firmware would process the ring exactly once and then fail. Change-ID: I2930b83c76194b3016a8ac0fa693f9a573995640 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Kamil Krawczyk 提交于
The admin queue length register is updated in config_a<sq|rq>_regs functions. We should not update it again, as we will trigger firmware to init the AQ again. In this case firmware will lose the information about the AQ Rx tail position and will see Rx queue as full (no free desc for FW to use). Signed-off-by: NKamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Addresses a few code format issues that have crept in over time. Change-Id: I1a62cbd16b29a218a933b0f7176abe748f9615e8 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
The firmware's AdminQ interface has matured a little, so update the code to use the new fields and values. Change-Id: I8fcd7b443f268dcf9346bd6a9e940fe9c2958891 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 06 1月, 2014 1 次提交
-
-
由 Anjali Singhai Jain 提交于
Always call the AQ call to shutdown the queue in the shutdown path. Check ASQ is alive before issuing the AQ command since we might be resetting to recover from a bad state in which case we should not issue the AQ command. Use the register variable for length so it can be used by PF, VF and GL AQ commands. Change-Id: Ic3d305687ea3f1a6afa84e864b7a27bd38a9af32 Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 05 1月, 2014 1 次提交
-
-
由 David Cassard 提交于
Save both a pointer to memory and the length in order to store all info about allocated kernel memory. This patch changes some adminq allocations to preserve the full i40e_dma_mem/i40e_virt_mem structs for every allocation. Change-Id: Ibcf96159aba4ba61f839d16d87d19478df28e630 Signed-off-by: NDavid Cassard <david.g.cassard@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 18 12月, 2013 1 次提交
-
-
由 Stephen Hemminger 提交于
Make local functions static in the file they are used. Remove functions i40e_aq_add_vlan and i40e_aq_remove_vlan since they are not used anywhere by current code. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 06 12月, 2013 3 次提交
-
-
由 Shannon Nelson 提交于
If the admin queue times out, retry some more to make driver load and reset more robust. Change-Id: I45c977b3d10a62c770d6072659ec27834849ca33 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Use more virtual registers to simplify code flows. Change-Id: I32cff3818c5ca3a3792487ba4fed8f1d0ea6145a Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
During admin queue shutdown clear some more registers explicitly. Change-Id: Ifb235c691e1c55e76bf66e0642207f464153d05a Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 27 9月, 2013 1 次提交
-
-
由 Jesse Brandeburg 提交于
coccicheck shows: drivers/net/ethernet/intel/i40e/i40e_adminq.c:704:2-8: Replace memcpy with struct assignment drivers/net/ethernet/intel/i40e/i40e_adminq.c:763:1-7: Replace memcpy with struct assignment drivers/net/ethernet/intel/i40e/i40e_adminq.c:810:2-8: Replace memcpy with struct assignment drivers/net/ethernet/intel/i40e/i40e_common.c:510:2-8: Replace memcpy with struct assignment Fix each of them with a *a = *b; Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 11 9月, 2013 1 次提交
-
-
由 Jesse Brandeburg 提交于
This patch implements the hardware specific init and management. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> CC: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com> CC: e1000-devel@lists.sourceforge.net Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-