Palmas series device like TPS65913, TPS80036 supports the backup battery
for powering the RTC when no other energy source is available.

The backup battery is optional, connected to the VBACKUP pin, and can be
nonrechargeable or rechargeable.  The rechargeable battery can be charged
from the system supply using the backup battery charger.

Add support for enabling charging of this backup battery.  Also add the DT
binding document and the new properties to have this support.
Signed-off-by: NLaxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: NFelipe Balbi <balbi@ti.com>
Acked-by: NKumar Gala <galak@codeaurora.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On some platforms (like AM33xx), a special register (RTC_IRQWAKEEN) is
available to enable Alarm Wakeup feature.  This register needs to be
properly handled for the rtcwake to work properly.

Platforms using such IP should set "ti,am3352-rtc" in rtc device dt
compatibility node.
Signed-off-by: NHebbar Gururaja <gururaja.hebbar@ti.com>
Acked-by: NKevin Hilman <khilman@linaro.org>
Acked-by: NSekhar Nori <nsekhar@ti.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Rob Landley <rob@landley.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add RTC driver for MOXA ART SoCs.
Signed-off-by: NJonas Jensen <jonas.jensen@gmail.com>
Reviewed-by: NMark Brown <broonie@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The 'remove' function is empty and does not do anything.  Delete it.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In order to get the module automatically loaded by hotplug mechanisms a
MODULE_DEVICE_TABLE is needed.

Therefore add one.

This makes it also possible to use a module name other than
HID-SENSOR-2000a0 which isn't very descriptive in kernel messages.
Signed-off-by: NAlexander Holler <holler@ahsoftware.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With the general-instruction extension facility (z10) a couple of
instructions with a pc-relative long displacement were introduced.  The
kprobes support for these instructions however was never implemented.

In result, if anybody ever put a probe on any of these instructions the
result would have been random behaviour after the instruction got executed
within the insn slot.

So lets add the missing handling for these instructions.  Since all of the
new instructions have 32 bit signed displacement the easiest solution is
to allocate an insn slot that is within the same 2GB area like the
original instruction and patch the displacement field.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The current two insn slot caches both use module_alloc/module_free to
allocate and free insn slot cache pages.

For s390 this is not sufficient since there is the need to allocate insn
slots that are either within the vmalloc module area or within dma memory.

Therefore add a mechanism which allows to specify an own allocator for an
own insn slot cache.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The current kpropes insn caches allocate memory areas for insn slots
with module_alloc().  The assumption is that the kernel image and module
area are both within the same +/- 2GB memory area.

This however is not true for s390 where the kernel image resides within
the first 2GB (DMA memory area), but the module area is far away in the
vmalloc area, usually somewhere close below the 4TB area.

For new pc relative instructions s390 needs insn slots that are within
+/- 2GB of each area.  That way we can patch displacements of
pc-relative instructions within the insn slots just like x86 and
powerpc.

The module area works already with the normal insn slot allocator,
however there is currently no way to get insn slots that are within the
first 2GB on s390 (aka DMA area).

Therefore this patch set modifies the kprobes insn slot cache code in
order to allow to specify a custom allocator for the insn slot cache
pages.  In addition architecure can now have private insn slot caches
withhout the need to modify common code.

Patch 1 unifies and simplifies the current insn and optinsn caches
        implementation. This is a preparation which allows to add more
        insn caches in a simple way.

Patch 2 adds the possibility to specify a custom allocator.

Patch 3 makes s390 use the new insn slot mechanisms and adds support for
        pc-relative instructions with long displacements.

This patch (of 3):

The two insn caches (insn, and optinsn) each have an own mutex and
alloc/free functions (get_[opt]insn_slot() / free_[opt]insn_slot()).

Since there is the need for yet another insn cache which satifies dma
allocations on s390, unify and simplify the current implementation:

- Move the per insn cache mutex into struct kprobe_insn_cache.
- Move the alloc/free functions to kprobe.h so they are simply
  wrappers for the generic __get_insn_slot/__free_insn_slot functions.
  The implementation is done with a DEFINE_INSN_CACHE_OPS() macro
  which provides the alloc/free functions for each cache if needed.
- move the struct kprobe_insn_cache to kprobe.h which allows to generate
  architecture specific insn slot caches outside of the core kprobes
  code.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As reported by Joe Perches: OOM messages generally aren't useful.
dmi_alloc is either a trivial front-end to kzalloc, and kzalloc already
does a dump_stack() when OOM, or for x86, dmi_alloc uses extend_brk
which BUGs when unsuccessful.

So we can remove all 6 such log messages in the dmi_scan driver, to
shrink the binary size (by 528 bytes on x86_64.)
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Reported-by: NJoe Perches <joe@perches.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add const to all DMI string pointers where this is possible.  This fixes a
checkpatch warning.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Cc: Joe Perches <joe@perches.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix all errors and trivial warnings reported by checkpatch for file
drivers/firmware/dmi_scan.c.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Cc: Joe Perches <joe@perches.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This comment predates the introduction of early_ioremap.  Since then the
missing calls to dmi_iounmap have been added by Ingo and Yinghai in
commits 0d64484f ("x86: fix DMI ioremap leak") and 3212bff3
("x86: left over fix for leak of early_ioremp in dmi_scan") .  That was
over 5 years ago so it is about time to drop this now misleading
comment.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ep_free() might iterate on a huge set of epitems and hold cpu too long.
Add two cond_resched() in order to yield cpu to other tasks.  This is safe
as we only hold mutexes in this function.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Theodore Ts'o <tytso@mit.edu>
Acked-by: NEric Wong <normalperson@yhbt.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As discussed recently on the arm [1] and lm-sensors [2] lists, it is
possible to use section markers on variables in a way which gcc doesn't
understand (or at least not the way the developer intended):

static struct __initdata samsung_pll_clock exynos4_plls[nr_plls] = {

does NOT put exynos4_plls in the .initdata section.  The __initdata marker
can be virtually anywhere on the line, EXCEPT right after "struct".  The
preferred location is before the "=" sign if there is one, or before the
trailing ";" otherwise.

[1] http://permalink.gmane.org/gmane.linux.ports.arm.kernel/258149
[2] http://lists.lm-sensors.org/pipermail/lm-sensors/2013-August/039836.html

So, update checkpatch to find these misuses and report an error when it's
immediately after struct or union, and a warning when it's otherwise not
immediately before the ; or =.

A similar patch was suggested by Andi Kleen
https://lkml.org/lkml/2013/8/5/648Signed-off-by: NJoe Perches <joe@perches.com>
Suggested-by: NJean Delvare <khali@linux-fr.org>
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A previous patch ("checkpatch: add --types option to report only
specific message types") uses a perl syntax introduced in perl version
5.14.

Use the backward compatible perl syntax instead.
Signed-off-by: NJoe Perches <joe@perches.com>
Reported-by: NJulia Lawall <julia.lawall@lip6.fr>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are some cases where checkpatch can take a long time to complete.
Reduce the likelihood of this long run-time by adding a new test for lines
with and without comments and eliminating checks on lines with only
comments.

This reduces the number of "ctx_statement_block" calls, and also the
number of tests of $stat, which is now undefined for these blank lines.

One test in particular, the "check for switch/default statements without a
break", could take an extremely long time to parse as it tries to skip
interleaving comments within the ctx_statement_block/$stat and that could
be done multiple times unnecessarily.

A small test case taken from cfg80211.h before this patch would take
1000's of seconds to run, now it's just a couple seconds.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Previous attempt at fixing SPACING errors could make a hash of several
defects.

This patch should make --fix be a lot better at correcting these defects.

Trim left and right sides of these defects appropriately instead of a
somewhat random attempt at it.

Trim left spaces from any following bit of the modified line when only a
single space is required around an operator.
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: Phil Carmody <phil.carmody@partner.samsung.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The tracing subsystem uses slightly odd #defines to set path/directory
locations for include files.

These #defines can cause false positives for the complex macro tests so
add exclusions for these specific #defines (TRACE_SYSTEM,
TRACE_INCLUDE_FILE, TRACE_INCLUDE_PATH).
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a --types convenience option to show only specific message types.
Combined with the --fix option, this can produce specific suggested
formatting patches to files.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

checkpatch can generate a false positive when inserting a new kernel-doc
block and function above an existing kernel-doc block.

Fix it by checking that the context line is also a newly inserted line.
Signed-off-by: NJoe Perches <joe@perches.com>
Reported-by: NDarren Hart <dvhart@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Using the extern keyword on function prototypes is superfluous visual
noise so suggest removing it.

Using extern can cause unnecessary line wrapping at 80 columns and
unnecessarily long multi-line function prototypes.
Signed-off-by: NJoe Perches <joe@perches.com>
Suggested-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Emit a warning when a signature is used more than once.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I got a bug report from a couple of users who said checkpatch.pl was
broken for them.  It was erroring out on fairly random lines most commonly
with messages like:

	Nested quantifiers in regex; marked by <--HERE in m/(\((?:[^\(\)]++ <-- HERE |(?-1))*\))/ at ./checkpatch.pl line 340.

The bug reporter was running a version of perl 5.8 which was end-of-lifed
in 2008: http://www.cpan.org/src/.  Versions of perl this old are at
_best_ quite untested.  At worst, they are crusty and known to be
completely broken.

If folks have a system _that_ old, then we should have mercy on them and
give them a half-decent error message rather than fail with nutty error
messages.

This patch enforces that checkpatch.pl is run with perl 5.10, which was
end-of-lifed in 2009.  The new --ignore-perl-version command-line switch
will let folks override this if they want.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

$Lval is a test for complete name (ie: foo->bar.Baz[1])

If any of this is CamelCase, then the current test uses the entire $Lval.
This isn't optimal because it can emit messages with foo->bar.Baz and
bar.Baz when Baz is a variable specified in an include file.

So instead, break the $Lval into words and check each word for CamelCase
uses.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Suggest a few more single-line corrections.

Remove DOS line endings
Simplify removing trailing whitespace
Remove global/static initializations to 0/NULL
Convert pr_warning to pr_warn
Add space after brace
Convert binary constants to hex
Remove whitespace after line continuation
Use inline not __inline or __inline__
Use __printf and __scanf
Use a single ; for statement terminations
Convert __FUNCTION__ to __func__
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When decompressing into memory, the output buffer length is set to some
arbitrarily high value (0x7fffffff) to indicate the output is, virtually,
unlimited in size.

The problem with this is that some platforms have their physical memory at
high physical addresses (0x80000000 or more), and that the output buffer
address and its "unlimited" length cannot be added without overflowing.
An example of this can be found in inflate_fast():

/* next_out is the output buffer address */
out = strm->next_out - OFF;
/* avail_out is the output buffer size. end will overflow if the output
 * address is >= 0x80000104 */
end = out + (strm->avail_out - 257);

This has huge consequences on the performance of kernel decompression,
since the following exit condition of inflate_fast() will be always true:

} while (in < last && out < end);

Indeed, "end" has overflowed and is now always lower than "out".  As a
result, inflate_fast() will return after processing one single byte of
input data, and will thus need to be called an unreasonably high number of
times.  This probably went unnoticed because kernel decompression is fast
enough even with this issue.

Nonetheless, adjusting the output buffer length in such a way that the
above pointer arithmetic never overflows results in a kernel decompression
that is about 3 times faster on affected machines.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Tested-by: NJon Medhurst <tixy@linaro.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The documentation mentions a "name" parameter, which does not exist.  This
commit removes such mention from the function documentation.
Signed-off-by: NEmilio López <emilio@elopez.com.ar>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's clearer to have patterns marked as directories.

Change the directory patterns without terminating slashes.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add ownership to maintainers file for the mach-bcm related files,
including drivers that are used for the SoCs defined in mach-bcm.
Signed-off-by: NChristian Daudt <csd@broadcom.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit c50cd357 ("net: gre: move GSO functions to gre_offload")
renamed and separated the file into multiple files.  Update the
patterns.
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: Dmitry Kozlov <xeb@mail.ru>
Cc: Daniel Borkmann <dborkman@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit a0e63123 ("usb: phy: move all PHY drivers to
drivers/usb/phy/") deleted the files, remove the file pattern.
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit f3bc64d6 ("USB: EHCI: DT support for generic bus glue")
removed the ehci-vt8500.c file, update the file pattern to include
ehci-platform.c.
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 6659a20a ("ARC: MAINTAINERS update for ARC") typoed the file
pattern.  Fix it.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 45fcac1a ("mfd: Move ssbi driver into drivers/mfd") move the
files, update the patterns.
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit d7104bff ("[media] MAINTAINERS: add
drivers/media/tuners/it913x*") used the incorrect file patterns.  Fix
it.
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NAntti Palosaari <crope@iki.fi>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit c937ca03 ("[media] MAINTAINERS: Add maintainer entry for
si4713 FM transmitter driver") typoed the pattern, fix it.
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NEduardo Valentin <edubezval@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 786baecf ("[media] dvb-usb: move it to
drivers/media/usb/dvb-usb") moved the files, update the pattern.
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 77c5f5d2 ("ghes_edac: Register at EDAC core the BIOS report")
typoed the file pattern.  Fix it.
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 09ec1d7e ("ARM: S3C24XX: Remove plat-s3c24xx directory in
arch/arm/") moved the files, remove the pattern.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>