Commit 09124e19 ("RDMA/nes: Add support for KR device id 0x0110") took
out too much code and broke CX4 link detection in back-to-back
configuration.  Put back the code that does the link check.
Signed-off-by: NChien Tung <chien.tin.tung@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Clear the stall bit to drop any incoming packets while destroying NIC
QP.  This will prevent a chip resource leak.
Signed-off-by: NChien Tung <chien.tin.tung@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Set assume_aligned_header bit in QP context as requested by hardware group.
Signed-off-by: NFaisal Latif <faisal.latif@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

During a hot-plug LLD removal event or an EEH error event, iw_cxgb3
must ensure that any/all threads that might be in a cxgb3 exported
function must return from the function before iw_cxgb3 returns from
its event processing.  Do this by calling synchronize_net().
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

When an iWARP device is unloaded, the ib_mad module logs errors.  It
should be ignoring iWARP devices on device removal just like it does
on device add.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Acked-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Print the return code of ib_post_send() if it fails to make these
debugging messages more useful.
Signed-off-by: NOr Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The IPoIB UD QP reports send completions to priv->send_cq, which is
usually left unarmed; it only gets armed when the number of
outstanding send requests reaches the size of the TX queue. This
arming is done only in the send path for the UD QP.  However, when
sending CM packets, the net queue may be stopped for the same reasons
but no measures are taken to recover the UD path from a lockup.

Consider this scenario: a host sends high rate of both CM and UD
packets, with a TX queue length of N.  If at some time the number of
outstanding UD packets is more than N/2 and the overall outstanding
packets is N-1, and CM sends a packet (making the number of
outstanding sends equal N), the TX queue will be stopped.  When all
the CM packets complete, the number of outstanding packets will still
be higher than N/2 so the TX queue will not be restarted.

Fix this by calling ib_req_notify_cq() when the queue is stopped in
the CM path.
Signed-off-by: NEli Cohen <eli@mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Constify struct sysfs_ops.

This is part of the ops structure constification
effort started by Arjan van de Ven et al.

Benefits of this constification:

 * prevents modification of data that is shared
   (referenced) by many other structure instances
   at runtime

 * detects/prevents accidental (but not intentional)
   modification attempts on archs that enforce
   read-only kernel data at runtime

 * potentially better optimized code as the compiler
   can assume that the const data cannot be changed

 * the compiler/linker move const data into .rodata
   and therefore exclude them from false sharing
Signed-off-by: NEmese Revfy <re.emese@gmail.com>
Acked-by: NDavid Teigland <teigland@redhat.com>
Acked-by: NMatt Domsch <Matt_Domsch@dell.com>
Acked-by: NMaciej Sosnowski <maciej.sosnowski@intel.com>
Acked-by: NHans J. Koch <hjk@linutronix.de>
Acked-by: NPekka Enberg <penberg@cs.helsinki.fi>
Acked-by: NJens Axboe <jens.axboe@oracle.com>
Acked-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Convert some drivers who export a single string as class attribute
to the new class_attr_string functions. This removes redundant
code all over.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Passing the attribute to the low level IO functions allows all kinds
of cleanups, by sharing low level IO code without requiring
an own function for every piece of data.

Also drivers can extend the attributes with own data fields
and use that in the low level function.

This makes the class attributes the same as sysdev_class attributes
and plain attributes.

This will allow further cleanups in drivers.

Full tree sweep converting all users.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Replace open-coded loop with for_each_set_bit().
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Acked-by: NRoland Dreier <rolandd@cisco.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Instead of repeating the error unwinding steps in each place an error
can be detected, use the common idiom of gotos into an error flow.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

We can reduce the number of IB interrupts from two interrupts per
srp_queuecommand() call to one by using separate CQs for send and
receive completions and processing send completions by polling every
time a TX IU is allocated.

Receive completion events still trigger an interrupt.
Signed-off-by: NBart Van Assche <bart.vanassche@gmail.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Apparently bogus mc address can break IPOIB multicast processing. Therefore
returning the check for addrlen back until this is resolved in bonding (I don't
see any other point from where mc address with non-dev->addr_len length can came
from).
Signed-off-by: NJiri Pirko <jpirko@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Due to the loop complexicity in nes_nic.c, I'm using char* to copy mc addresses
to it.
Signed-off-by: NJiri Pirko <jpirko@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for KR device id 0x0110.  While at it, cleanup
nes_init_phy() by splitting it into nes_init_1g_phy() and
nes_init_2025_phy().

Remove support for NES_PHY_TYPE_IRIS, which was used on an XFP board
that was only manufactured in small quantities and given out for evals
in even smaller quantities.
Signed-off-by: NChien Tung <chien.tin.tung@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The anon_inodes interface has been split to allow creating a bare
(non-installed) file pointer and also extended to allow specifying
O_RDONLY in the flags.  This makes it a suitable replacement for the
private "infinibandeventfs" pseudo-filesystem used by uverbs, and this
replacement saves a small chunk of boilerplate code.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

ib_ud_header_init() first clears header and then fills up the various
fields.  Later on, it tests header->immediate_present, which it has
already cleared, so the condition is always false.  Fix this by adding
an immediate_present parameter and setting header->immediate_present
as is done with grh_present.  Also remove unused calculation of
header_len.
Signed-off-by: NEli Cohen <eli@mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

If cxgb3 calls the iw_cxgb3 t3cclient remove function due to a device
removal event, then the iwch device must be marked with CXIO_ERROR_FATAL
since the device below us is going away.  Otherwise, we can get stuck in
a deadlock as RDMA ULPs try and deallocate objects (like MRs, QPs, etc).
So always mark the device with CXIO_ERROR_FATAL when removing.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Only kernel mode CQs need the SW queue memory allocated.  The SW queue
for user mode CQs is allocated in userspace by libcxgb3.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

T3 hardware doorbell FIFO overflows can cause application stalls due
to lost doorbell ring events.  This has been seen when running large
NP IMB alltoall MPI jobs.  The T3 hardware supports an xon/xoff-type
flow control mechanism to help avoid overflowing the HW doorbell FIFO.

This patch uses these interrupts to disable RDMA QP doorbell rings
when we near an overflow condition, and then turn them back on (and
ring all the active QP doorbells) when when the doorbell FIFO empties
out.  In addition if an doorbell ring is dropped by the hardware, the
code will now recover.

Design:

cxgb3:
- enable these DB interrupts
- in the interrupt handler, schedule work tasks to call the ULPs event
  handlers with the new events.
- ring all the qset txqs when an overflow is detected.

iw_cxgb3:
- disable db ringing on all active qps when we get the DB_FULL event
- enable db ringing on all active qps and ring all active dbs when we get
  the DB_EMPTY event
- On DB_DROP event:
       - disable db rings in the event handler
       - delay-schedule a work task which rings and enables the dbs on
         all active qps.
- in post_send and post_recv logic, don't ring the db if it's disabled.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

As shown when 'let c_space_errors=1' is set in vim.
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Some large systems may support more than IB_UCM_MAX_DEVICES
(currently 32).

This change allows us to support more devices in a backwards-compatible
manner. the first IB_UCM_MAX_DEVICES keep the same major/minor device
numbers they've always had.

If there are more than IB_UCM_MAX_DEVICES, then we dynamically request
a new major device number (new minors start at 0).
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

This change is not useful by itself, but sets us up for a future
change that allows us to support more than IB_UCM_MAX_DEVICES.
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

This change is not useful by itself, but sets us up for a future
change that allows us to dynamically allocate device numbers in case
we have more than IB_UCM_MAX_DEVICES in the system.
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Clean errors as shown when 'let c_space_errors=1' is set in vim.
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Some large systems may support more than IB_UMAD_MAX_PORTS
(currently 64).

This change allows us to support more ports in a backwards-compatible
manner.  The first IB_UMAD_MAX_PORTS keep the same major/minor device
numbers they've always had.

If there are more than IB_UMAD_MAX_PORTS, we then dynamically request
a new major device number (new minors start at 0).
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

This change is not useful by itself, but sets us up for a future change
that allows us to support more than IB_UMAD_MAX_PORTS in a system.
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

This change is not useful by itself, but sets us up for a future
change that allows us to dynamically allocate device numbers in case
we have more than IB_UMAD_MAX_PORTS in the system.
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

We no longer need this data structure, as it was used to associate an
inode back to a struct ib_umad_port during ->open().  But now that
we're embedding a struct cdev in struct ib_umad_port, we can use the
container_of() macro to go from the inode back to the device instead.
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Instead of storing pointers to cdev and sm_cdev, embed the full
structures instead.

This change allows us to use the container_of() macro in ib_umad_open()
and ib_umad_sm_open() in a future patch.

This change increases the size of struct ib_umad_port to 320 bytes
from 128.
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Clean up the errors as shown when 'let c_space_errors=1' is set in vim.
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Eliminate some padding in the structure by rearranging the members.
sizeof(struct ib_uverbs_event_file) is now 72 bytes (from 80) and
more members now fit in the first cacheline.
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Some large systems may support more than IB_UVERBS_MAX_DEVICES
(currently 32).

This change allows us to support more devices in a backwards-compatible
manner.  The first IB_UVERBS_MAX_DEVICES keep the same major/minor
device numbers that they've always had.

If there are more than IB_UVERBS_MAX_DEVICES, we then dynamically
request a new major device number (new minors start at 0).

This change increases the maximum number of HCAs to 64 (from 32).
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

This change is not useful by itself, but sets us up for a future change
that allows us to support more than IB_UVERBS_MAX_DEVICES in a system.
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

This change is not useful by itself, but it sets us up for a future
change that allows us to dynamically allocate device numbers in case
we have more than IB_UVERBS_MAX_DEVICES in the system.
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

dev_table's raison d'etre was to associate an inode back to a struct
ib_uverbs_device.

However, now that we've converted ib_uverbs_device to contain an
embedded cdev (instead of a *cdev), we can use the container_of()
macro and cast back to the containing device.

There's no longer any need for dev_table, so get rid of it.
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Instead of storing a pointer to a cdev, embed the entire struct cdev.

This change allows us to use the container_of() macro in
ib_uverbs_open() in a future patch.

This change increases the size of struct ib_uverbs_device to 168 bytes
across 3 cachelines from 80 bytes in 2 cachelines.  However, we
rearrange the members so that everything fits into the first cacheline
except for the struct cdev. Finally, we don't touch the cdev in any
fastpaths, so this change shouldn't negatively affect performance.
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>