- 10 1月, 2006 33 次提交
-
-
由 Oliver Endriss 提交于
- Improved recovery from ARM crash and the way a crash is detected. Minor white space clean-up, debug output fixed. Signed-off-by: NOliver Endriss <o.endriss@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Michael Krufky 提交于
- Now using firmware "dvb-usb-bluebird-01.fw", with combined support for atsc and dvb-t Bluebird models. - Use usb alt setting 0 for EP4 transfer (dvb-t), - Use usb alt setting 7 for EP2 transfer (atsc) */ Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Michael Krufky 提交于
- Adds Bluebird ATSC support to the cxusb driver, using dvb-usb-bluebird-atsc-01.fw firmware. Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Patrick Boettcher 提交于
- A new firmware fixes VHF tuning issues. This changes the firmware file name in the driver. Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Michael Krufky 提交于
- add firmware instructions for nxt2002 and nxt2004 Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Ville Skytt\ä 提交于
- make the firmware dir documentation and comments consistent in the v4l-dvb tree. Signed-off-by: NVille Skyttä <ville.skytta@iki.fi> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Michael Krufky 提交于
- minor whitespace cleanups Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Patrick Boettcher 提交于
- Initialize the the dvb-usb-device-pointer in the -init function to NULL, to be sure that a dvb-usb-device was really initialized. Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Michael Krufky 提交于
- As far back as the video4linux cvs repository goes, there is no mention of BTTV_TWINHAN_VP3021. It seems that this was done for the sake of backwards compatability with some older v4l, but this can no longer be necessary due to the v4l/dvb cvs merger, nor should this have ever existed in the upstream kernel. Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Acked-by: NManu Abraham <manu@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Michael Krufky 提交于
- Removed some unneeded #ifdef's Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Michael Krufky 提交于
- Corrected Thomson DTT 7611 tuner programming, based on spec sheet - renamed to Thomson DTT 761x - applies to DTT 7611 7611A 7612 7613 7613A 7614 7615 7615A (DTT 7610 is similar, but slightly different programming) - corrected frequency ranges for analog and digital modes Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Hans Verkuil 提交于
- Fix 64-bit compile warnings Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Alex Woods 提交于
- Collection of patches from Peter Beutner addressing: - add symbolrates to the DVB-S frontend description - fix capability flags in DVB-S frontend describtion - remove some void casts - disable zig-zag scanning as it makes no sense for DVB-T - set sensible min_delay value - return an error for requested filter types the driver can't handle Signed-off-by: NPeter Beutner <p.beutner@gmx.net> Signed-off-by: NAlex Woods <linux-dvb@giblets.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Deti Fliegl 提交于
- USB hot unplug Oops fix. Signed-off-by: NDeti Fliegl <deti@fliegl.de> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Jesper Juhl 提交于
- Here's a small patch to decrease the number of pointer derefs in drivers/media/dvb/b2c2/flexcop-fe-tuner.c Benefits of the patch: - Fewer pointer dereferences should make the code slightly faster. - Size of generated code is smaller - Improved readability Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Mauro Carvalho Chehab 提交于
- digitv_ctrl_msg() if (wo) test is reversed. fixed. - usb timeout is in Hz, not in jiffies. - NULL replaced by 0 to be coherent. - removed uneeded headers. Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Steven Toth 提交于
- Cleanup timeout handling in cx24123_pll_writereg(), and use a reasonable value for the timeout. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Stephen Williams 提交于
- Make FE_READ_UNCORRECTED_BLOCKS reset the count after each call, thus returning a momentary value like all other demods do, instead of an absolute, ever increasing count. Signed-off-by: NStephen Williams <stephen.williams@gmail.com> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Steven Toth 提交于
- Add support for the Hauppauge HVR1100 and HVR1100-LP products. - Add i2c_gate_ctrl callback function to dvb_frontend_ops struct. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Michael Krufky 提交于
- vfree(NULL) is legal. Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Noone Important 提交于
- Adds a time-delay to IR remote button presses for av7110_ir input, such that it acts more like a keyboard. A short press will be treated as a single button press. Holding down a button on the remote will respond like holding down a key on the keyboard, and result in a key-repeat. This just introduces a delay between the 1st press, and going into key-repeat so that it is possible to get a single 'up'. Signed-off-by: Noone Important <nxhxzi702 at sneakemail.com> Signed-off-by: NOliver Endriss <o.endriss@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Andrew de Quincey 提交于
- Port code for SU1278/SH2 (TUA6100) from pre-refactored code Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Vadim Catana 提交于
- Add support for KWorld DVB-S 100, based on the same chips as Hauppauge Nova-S Plus (CX23883/CX24123/CX24109), without the Intersil ISL6421, which is used for LNB control. - LNB voltage and tone are controled by LNBDC and LNBTone bits from register 0x29 of the CX24123 demodulator. - The MO_GP0_IO register from CX23883 is used to turn LNB power on and off. Signed-off-by: NVadim Catana <skystar@moldova.cc> Acked-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Johannes Stezenbach 提交于
- Minor cleanups. Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Steve Toth 提交于
- Added demodulator driver for Nova-S-Plus and Nova-SE2 DVB-S support. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Andrew de Quincey 提交于
- Implement frontend-specific tuning and the ability to disable zigzag Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Dr. Werner Fink 提交于
- Driver support for live-ac3, firmware >= 2621 required. Signed-off-by: NDr. Werner Fink <werner@suse.de> Signed-off-by: NOliver Endriss <o.endriss@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Marco Schluessler 提交于
- Fixed mpeg audio on spdif from Nexus-CA card (rev 2.3), definitions for sound chip MSP3415 Signed-off-by: NMarco Schluessler <marco@lordzodiac.de> Signed-off-by: NOliver Endriss <o.endriss@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Oliver Endriss 提交于
- LNB power can now be switched off for Activy Budget-S rev GR/AL. Dishnetwork support fixed for Nova-S with bsbe1/lnbp21 frontend and Activy Budget-S rev AL. Signed-off-by: NOliver Endriss <o.endriss@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Oliver Endriss 提交于
- Fixed dishnetwork support for Nexus-S rev 2.3 Signed-off-by: NOliver Endriss <o.endriss@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Andrew de Quincey 提交于
- Fixes for the topuptv/SCM mediaguard CAM module in KNC1 CI module Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Hartmut Hackmann 提交于
- Fixed oddities at firmware download - more tolerant vs crystal frequency offset - lower sampling clock Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Patrick Boettcher 提交于
- To make the integration of future devices easier - modified the dvb-usb-part to allow a device-specific firmware download - added an option to specify whether a device reconnects after a firmware download or not. Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
- 07 1月, 2006 1 次提交
-
-
由 Sam Ravnborg 提交于
Now when kbuild passes KBUILD_MODNAME with "" do not __stringify it when used. Remove __stringnify for all users. This also fixes the output of: $ ls -l /sys/module/ drwxr-xr-x 4 root root 0 2006-01-05 14:24 pcmcia drwxr-xr-x 4 root root 0 2006-01-05 14:24 pcmcia_core drwxr-xr-x 3 root root 0 2006-01-05 14:24 "processor" drwxr-xr-x 3 root root 0 2006-01-05 14:24 "psmouse" The quoting of the module names will be gone again. Thanks to GregKH + Kay Sievers for reproting this. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 05 1月, 2006 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
It is no longer needed, so let's remove it, saving a bit of memory. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 19 12月, 2005 1 次提交
-
-
由 Oliver Endriss 提交于
- Enable SPDIF output for DVB-S rev 2.3. Firmware 2623 or higher required. Signed-off-by: NOliver Endriss <o.endriss@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
- 16 12月, 2005 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 13 12月, 2005 3 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Clean up whitespaces at v4l/dvb files Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mauro Carvalho Chehab 提交于
Clean up whitespaces at v4l/dvb files Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mauro Carvalho Chehab 提交于
Clean up whitespaces at v4l/dvb files Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-