It was broken before. But having it is important as possible hardware
bug workaround.

And previously there was no way to force swiotlb if there is another IOMMU.
Side effect is that iommu=force won't force swiotlb anymore even if there
isn't another IOMMU.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

As Travis Betak points out it accesses the wrong northbridge subfunction
now. Switch back to the old code.

Cc: "Travis Betak" <betak@mpdtxmail.amd.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Calgary hits a NULL pointer dereference when booting in a multi-chassis
NUMA system.  See Redhat bugzilla number 198498, found by Konrad
Rzeszutek (konradr@redhat.com).

There are many issues that had to be resolved to fix this problem.
Firstly when I originally wrote the code to handle NUMA systems, I
had a large misunderstanding that was not corrected until now.  That was
that I thought the "number of nodes online" referred to number of
physical systems connected.  So that if NUMA was disabled, there
would only be 1 node and it would only show that node's PCI bus.
In reality if NUMA is disabled, the system displays all of the
connected chassis as one node but is only ignorant of the delays
in accessing main memory.  Therefore, references to num_online_nodes()
and MAX_NUMNODES are incorrect and need to be set to the maximum
number of nodes that can be accessed (which are 8).  I created a
variable, MAX_NUM_CHASSIS, and set it to 8 to fix this.

Secondly, when walking the PCI in detect_calgary, the code only
checked the first "slot" when looking to see if a device is present.
This will work for most cases, but unfortunately it isn't always the
case.  In the NUMA MXE drawers, there are USB devices present on the
3rd slot (with slot 1 being empty).  So, to work around this, all
slots (up to 8) are scanned to see if there are any devices present.

Lastly, the bus is being enumerated on large systems in a different
way the we originally thought.  This throws the ugly logic we had
out the window.  To more elegantly handle this, I reorganized the
kva array to be sparse (which removed the need to have any bus number
to kva slot logic in tce.c) and created a secondary space array to
contain the bus number to phb mapping.

With these changes Calgary boots on an x460 with 4 nodes with and
without NUMA enabled.
Signed-off-by: NJon Mason <jdmason@us.ibm.com>
Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fixed off-by-one error in detect_calgary and calgary_init which will
cause arrays to overflow.  Also, removed impossible to hit BUG_ON.
Signed-off-by: NJon Mason <jdmason@us.ibm.com>
Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

On Intel systems generally the TSC stops in C3 or deeper,
so don't use it there. Follows similar logic on i386.

This should fix problems on Meroms.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Update defconfig
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata] sata_promise: comment out duplicate PCI ID
  [PATCH] libata: improve EH action and EHI flag handling
  [PATCH] libata: fix eh_skip_recovery condition
  [PATCH] libata: fix autopsy ehc->i.action and ehc->i.dev handling

Merge branch 'upstream' of git://electric-eye.fr.zoreil.com/home/romieu/linux-2.6 into upstream-fixes

Okay, Fix both typo's in one patch .The impact is that the incorrect value
was being computed for blinking LED and interrupt moderation values.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Always do a dummy RDMA after loading the firmware to work around
buggy PCIe chipsets which do not implement resending properly.
This is so cheap as to be almost free, and should never have been
conditional on the tx boundary != 4096.
Signed-off-by: NBrice Goglin <brice@myri.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes

Fix robust PI-futexes to be properly unlocked on unexpected exit.

For this to work the kernel has to know whether a futex is a PI or a
non-PI one, because the semantics are different.  Since the space in
relevant glibc data structures is extremely scarce, the best solution is
to encode the 'PI' information in bit 0 of the robust list pointer.
Existing (non-PI) glibc robust futexes have this bit always zero, so the
ABI is kept.  New glibc with PI-robust-futexes will set this bit.

Further fixes from Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NUlrich Drepper <drepper@redhat.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix pi_state->list handling bugs: list handling mishap, locking error.
Plus add more debug checks and fix a few style issues i noticed while
debugging this.

(reported by Ulrich Drepper and Jakub Jelinek.)
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Similar patch to earlier x86-64 patch. When the dwarf2 unwinder fails
dump the left over stack with the old unwinder.

Also some clarifications in the headers.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The dwarf2 unwinder currently often gets stuck because a lot
of assembly code doesn't have proper dwarf2 annotiation yet.

This currently often happens with __down. Should fix this by
adding proper dwarf2 annotation to all inline assembly. However
until that's done we need a quick fix for 2.6.18 to avoid
incomplete backtraces.

So when this happens dump the rest of the stack with the old unwinder
instead of silently not dumping it. There was already a optional
"both" mode that dumped both, but that was too ugly.

I also clarified the headers for the different backtraces a bit.

Also add a clear error message for missing dwarf2
annotation that people can work on.

And I removed a dead variable left over from Ingo's changes.

Cc: mingo@elte.hu
Cc: jbeulich@novell.com
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In x86_64 platform, INT1 and INT3 trap stack is IST stack called DEBUG_STACK,
when INT1/INT3 trap happens, system will switch to DEBUG_STACK by hardware.
Current DEBUG_STACK size is 4K, when int1/int3 trap happens, kernel will
minus current DEBUG_STACK IST value by 4k. But if int3/int1 trap is nested,
it will destroy other vector's IST stack. This patch modifies this, it sets
DEBUG_STACK size as 8K and allows two level of nested int1/int3 trap.

Kprobe DEBUG_STACK may be nested, because kprobe handler may be probed
by other kprobes.

Thanks jbeulich for pointing out error in the first patch.

[AK: nested kprobes are pretty dubious. Hopefully one nest
will be enough. This will cost 8K per CPU (4K more than before)]
Signed-off-by: Nbibo, mao <bibo.mao@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When int 0x80 is called from long mode r8-r11 would leak out of the
kernel (or rather they would be filled with some values from
the kernel stack). I don't think it's a security issue because
the values come from the fixed stack frame which should be near
always user registers from a previous interrupt.

Still better fix it.

Longer term the register save macros need to be cleaned up
to avoid such mistakes in the future.

Original analysis from Richard Brunner, fix by me.

Cc: Richard.Brunner@amd.com
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fixes a obscure user space triggerable crash during oprofiling.

Oprofile calls profile_pc from NMIs even when user_mode(regs) is not true and
the program counter is inside the kernel lock section. This opens
a race - when a user program jumps to a kernel lock address and
a NMI happens before the illegal page fault exception is raised
and the program has a unmapped esp or ebp then the kernel could
oops. NMIs have a higher priority than exceptions so that could
happen.

Add user_mode checks to i386/x86-64 profile_pc to prevent that.

Cc: John Levon <levon@movementarian.org>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] update default configuration
  [S390] duplicate ccw devices in ccwgroup.
  [S390] permanent subchannel busy conditions may cause I/O stall

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SUNLANCE]: fix compilation on sparc-UP
  [SPARC]: Defer clock_probe to fs_initcall()
  [SPARC64]: Fix typo in pgprot_noncached().
  [SPARC64]: Fix quad-float multiply emulation.

* git://oss.sgi.com:8090/nathans/xfs-rc-2.6:
  [XFS] Ensure bulkstat from an invalid inode number gets caught always with
  [XFS] Fix a barrier related forced shutdown on mounts with quota enabled.
  [XFS] Fix remount vs no/barrier options by ensuring we clear unwanted
  [XFS] All xfs_disk_dquot_t values are (as the name says) disk endian.

* 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block:
  [PATCH] scsi: kill overeager "not-ready" messages
  [PATCH] it821x: fix ide dma setup bug
  [PATCH] ide: if the id fields looks screwy, disable DMA
  [PATCH] ide: option to disable cache flushes for buggy drives

Recent changes in i386 __switch_to() have a misplaced closing
parenthesis causing an unlikely() to terminate early.
Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

EINVAL.

SGI-PV: 953819
SGI-Modid: xfs-linux-melb:xfs-kern:26629a
Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 912426
SGI-Modid: xfs-linux-melb:xfs-kern:26622a
Signed-off-by: NNathan Scott <nathans@sgi.com>

flags from iclog buffers before submitting them for writing.

SGI-PV: 954772
SGI-Modid: xfs-linux-melb:xfs-kern:26605a
Signed-off-by: NNathan Scott <nathans@sgi.com>

Before putting them into struct statfs they should be endian-swapped.

SGI-PV: 954580
SGI-Modid: xfs-linux-melb:xfs-kern:26550a
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNathan Scott <nathans@sgi.com>

HAL and friends have a tendency to trigger this one all the time.
It's not really interesting, so kill it. The vendor kernels all do
anyways.
Signed-off-by: NJens Axboe <axboe@suse.de>

Only enable dma for a valid speed setting.
Signed-off-by: NJens Axboe <axboe@suse.de>

It's the safer choice. Originally due to a bug in itx821x, but a
generally sound thing to do.
Signed-off-by: NJens Axboe <axboe@suse.de>

Some drives claim they support cache flushing, but get seriously
confused if you try. Add this option to be able to boot with
barriers enabled by default.
Signed-off-by: NJens Axboe <axboe@suse.de>

From: Bob Breuer <breuerr@mc.net>

That way all the of_driver bits will be ready.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The sun4v code sequence was or'ing in the sun4u pte bits by mistake.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Something is wrong with the 3-multiply (vs. 4-multiply) optimized
version of _FP_MUL_MEAT_2_*(), so just use the slower version
which actually computes correct values.

Noticed by Rene Rebe
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ieee80211_crypt_tkip will not work without CRC32.

  LD      .tmp_vmlinux1
net/built-in.o: In function `ieee80211_tkip_encrypt':
net/ieee80211/ieee80211_crypt_tkip.c:349: undefined reference to `crc32_le'

Reported by Toralf Foerster <toralf.foerster@gmx.de>
Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

When determining whether there's a key to set or not, orinoco should be
looking at the key length, not the key data.  Otherwise confusion reigns
when trying to set TX key only, passing in zero-length key, but non-NULL
pointer.  Key length takes precedence over non-NULL key data.
Signed-off-by: NDan Williams <dcbw@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Johann Uhrmann reported a bcm43xx crash and Michael Buesch tracked
it down to a problem with the new shared key auth code (recursive
calls into the driver)

This patch (effectively Michael's patch with a couple of small
modifications) solves the problem by sending the authentication
challenge response frame from a workqueue entry.

I also removed a lone \n from the bcm43xx messages relating to
authentication mode - this small change was previously discussed but
not patched in.
Signed-off-by: NDaniel Drake <dsd@gentoo.org>
Acked-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>