When dealing with key handling for shared futexes, we can drastically reduce
the usage/need of the page lock. 1) For anonymous pages, the associated futex
object is the mm_struct which does not require the page lock. 2) For inode
based, keys, we can check under RCU read lock if the page mapping is still
valid and take reference to the inode. This just leaves one rare race that
requires the page lock in the slow path when examining the swapcache.

Additionally realtime users currently have a problem with the page lock being
contended for unbounded periods of time during futex operations.

Task A
     get_futex_key()
     lock_page()
    ---> preempted

Now any other task trying to lock that page will have to wait until
task A gets scheduled back in, which is an unbound time.

With this patch, we pretty much have a lockless futex_get_key().

Experiments show that this patch can boost/speedup the hashing of shared
futexes with the perf futex benchmarks (which is good for measuring such
change) by up to 45% when there are high (> 100) thread counts on a 60 core
Westmere. Lower counts are pretty much in the noise range or less than 10%,
but mid range can be seen at over 30% overall throughput (hash ops/sec).
This makes anon-mem shared futexes much closer to its private counterpart.
Signed-off-by: NMel Gorman <mgorman@suse.de>
[ Ported on top of thp refcount rework, changelog, comments, fixes. ]
Signed-off-by: NDavidlohr Bueso <dbueso@suse.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Chris Mason <clm@fb.com>
Cc: Darren Hart <dvhart@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: dave@stgolabs.net
Link: http://lkml.kernel.org/r/1455045314-8305-3-git-send-email-dave@stgolabs.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

Ingo suggested we rename how we reference barriers A and B
regarding futex ordering guarantees. This patch replaces,
for both barriers, MB (A) with smp_mb(); (A), such that:

 - We explicitly state that the barriers are SMP, and

 - We standardize how we reference these across futex.c
   helping readers follow what barrier does what and where.
Suggested-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NDavidlohr Bueso <dbueso@suse.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Chris Mason <clm@fb.com>
Cc: Darren Hart <dvhart@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: dave@stgolabs.net
Link: http://lkml.kernel.org/r/1455045314-8305-2-git-send-email-dave@stgolabs.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

Conflicts:
	kernel/locking/lockdep.c
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Pull PCI fixes from Bjorn Helgaas:
 "These are some Renesas binding updates for PCI host controllers, a
  Broadcom fix for a regression we added in v4.5-rc1, and a fix for an
  AER use-after-free problem that can cause memory corruption.

  Summary:

  AER:
    Flush workqueue on device remove to avoid use-after-free (Sebastian Andrzej Siewior)

  Broadcom iProc host bridge driver:
    Allow multiple devices except on PAXC (Ray Jui)

  Renesas R-Car host bridge driver:
    Add gen2 device tree support for r8a7793 (Simon Horman)
    Add device tree support for r8a7793 (Simon Horman)"

* tag 'pci-v4.5-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: rcar: Add device tree support for r8a7793
  PCI: rcar: Add gen2 device tree support for r8a7793
  PCI: iproc: Allow multiple devices except on PAXC
  PCI/AER: Flush workqueue on device remove to avoid use-after-free

Merge fixes from Andrew Morton:
 "10 fixes"

The lockdep hlist conversion is in the locking tree too, waiting for the
next merge window.  Andrew thought it should go in now.  I'll take it,
since it fixes a real problem and looks trivially correct (famous last
words).

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  arch/x86/Kconfig: CONFIG_X86_UV should depend on CONFIG_EFI
  mm: fix pfn_t vs highmem
  kernel/locking/lockdep.c: convert hash tables to hlists
  mm,thp: fix spellos in describing __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
  mm,thp: khugepaged: call pte flush at the time of collapse
  mm/backing-dev.c: fix error path in wb_init()
  mm, dax: check for pmd_none() after split_huge_pmd()
  vsprintf: kptr_restrict is okay in IRQ when 2
  mm: fix filemap.c kernel doc warning
  ubsan: cosmetic fix to Kconfig text

Pull MMC fixes from Ulf Hansson:
 "Here are some mmc fixes intended for v4.5 rc4.

  MMC core:
   - Fix an sysfs ABI regression
   - Return an error in a specific error path dealing with mmc ioctls

  MMC host:
   - sdhci-pci|acpi: Fix card detect race for Intel BXT/APL
   - sh_mmcif: Correct TX DMA channel allocation
   - mmc_spi: Fix error handling for dma mapping errors
   - sdhci-of-at91: Fix an unbalance issue for the runtime PM usage count
   - pxamci: Fix the device-tree probe deferral path
   - pxamci: Fix read-only GPIO polarity"

* tag 'mmc-v4.5-rc2' of git://git.linaro.org/people/ulf.hansson/mmc:
  Revert "mmc: block: don't use parameter prefix if built as module"
  mmc: sdhci-acpi: Fix card detect race for Intel BXT/APL
  mmc: sdhci-pci: Fix card detect race for Intel BXT/APL
  mmc: sdhci: Allow override of get_cd() called from sdhci_request()
  mmc: sdhci: Allow override of mmc host operations
  mmc: sh_mmcif: Correct TX DMA channel allocation
  mmc: block: return error on failed mmc_blk_get()
  mmc: pxamci: fix the device-tree probe deferral path
  mmc: mmc_spi: add checks for dma mapping error
  mmc: sdhci-of-at91: fix pm runtime unbalanced issue in error path
  mmc: pxamci: fix again read-only gpio detection polarity

Pull sound fixes from Takashi Iwai:
 "In this rc, we've got more volume than previous rc, unsurprisingly;
  the majority of updates in ASoC are about Intel drivers, and another
  major changes are the continued plumbing of ALSA timer bugs revealed
  by syzkaller fuzzer.  Hopefully both settle down now.

  Other than that, HD-audio received a couple of code fixes as well as
  the usual quirks, and various small fixes are found for FireWire
  devices, ASoC codecs and drivers"

* tag 'sound-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (50 commits)
  ASoC: arizona: fref must be limited in pseudo-fractional mode
  ASoC: sigmadsp: Fix missleading return value
  ALSA: timer: Fix race at concurrent reads
  ALSA: firewire-digi00x: Drop bogus const type qualifier on dot_scrt()
  ALSA: hda - Fix bad dereference of jack object
  ALSA: timer: Fix race between stop and interrupt
  ALSA: timer: Fix wrong instance passed to slave callbacks
  ASoC: Intel: Add module tags for common match module
  ASoC: Intel: Load the atom DPCM driver only
  ASoC: Intel: Create independent acpi match module
  ASoC: Intel: Revert "ASoC: Intel: fix ACPI probe regression with Atom DPCM driver"
  ALSA: dummy: Implement timer backend switching more safely
  ALSA: hda - Fix speaker output from VAIO AiO machines
  Revert "ALSA: hda - Fix noise on Gigabyte Z170X mobo"
  ALSA: firewire-tascam: remove needless member for control and status message
  ALSA: firewire-tascam: remove a flag for controller
  ALSA: firewire-tascam: add support for FW-1804
  ALSA: firewire-tascam: fix NULL pointer dereference when model identification fails
  ALSA: hda - Fix static checker warning in patch_hdmi.c
  ASoC: Intel: Skylake: Remove autosuspend delay
  ...

Pull fbdev fixes from Tomi Valkeinen:
 - fix omap2plus_defconfig to enable omapfb as it was in v4.4
 - ocfb: fix timings for margins
 - s6e8ax0, da8xx-fb: fix compile warnings
 - mmp: fix build failure caused by bad printk parameters
 - imxfb: fix clock issue which kept the display off

* tag 'fbdev-fixes-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
  video: fbdev: imxfb: Provide a reset mechanism
  fbdev: mmp: print IRQ resource using %pR format string
  fbdev: da8xx-fb: remove incorrect type cast
  fbdev: s6e8ax0: avoid unused function warnings
  ocfb: fix tgdel and tvdel timing parameters
  ARM: omap2plus_defconfig: update display configs

Pull SCSI fixes from James Bottomley:
 "A set of seven fixes:

  Two regressions in the new hisi_sas arm driver, a blacklist entry for
  the marvell console which was causing a reset cascade without it, a
  race fix in the WRITE_SAME/DISCARD routines, a retry fix for the rdac
  driver, without which, it would prematurely return EIO and a couple of
  fixes for the hyper-v storvsc driver"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  block/sd: Return -EREMOTEIO when WRITE SAME and DISCARD are disabled
  SCSI: Add Marvell Console to VPD blacklist
  scsi_dh_rdac: always retry MODE SELECT on command lock violation
  storvsc: Use the specified target ID in device lookup
  storvsc: Install the storvsc specific timeout handler for FC devices
  hisi_sas: fix v1 hw check for slot error
  hisi_sas: add dependency for HAS_IOMEM

Pull drm amd fixes from Dave Airlie:
 "Been pretty quiet.

  This is an amdgpu fixes pull from AMD, a bunch of powerplay stability
  fixes, race fix, hibernate fix, and a possible circular locking fix"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (21 commits)
  drm/amdgpu: fix issue with overlapping userptrs
  drm/radeon: hold reference to fences in radeon_sa_bo_new
  drm/amdgpu: remove unnecessary forward declaration
  drm/amdgpu: hold reference to fences in amdgpu_sa_bo_new (v2)
  drm/amdgpu: fix s4 resume
  drm/amdgpu/cz: plumb pg flags through to powerplay
  drm/amdgpu/tonga: plumb pg flags through to powerplay
  drma/dmgpu: move cg and pg flags into shared headers
  drm/amdgpu: remove unused cg defines
  drm/amdgpu: add a cgs interface to fetch cg and pg flags
  drm/amd/powerplay/tonga: disable vce pg
  drm/amd/powerplay/tonga: disable uvd pg
  drm/amd/powerplay/cz: disable vce pg
  drm/amd/powerplay/cz: disable uvd pg
  drm/amdgpu: be consistent with uvd cg flags
  drm/amdgpu: clean up vce pg flags for cz/st
  drm/amdgpu: handle vce pg flags properly
  drm/amdgpu: handle uvd pg flags properly
  drm/amdgpu/dpm/ci: switch over to the common pcie caps interface
  drm/amdgpu/cik: don't mess with aspm if gpu is root bus
  ...

Pull crypto fix from James Morris.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  EVM: Use crypto_memneq() for digest comparisons

Pull btrfs fixes from Chris Mason:
 "This has a few fixes from Filipe, along with a readdir fix from Dave
  that we've been testing for some time"

* 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  btrfs: properly set the termination value of ctx->pos in readdir
  Btrfs: fix hang on extent buffer lock caused by the inode_paths ioctl
  Btrfs: remove no longer used function extent_read_full_page_nolock()
  Btrfs: fix page reading in extent_same ioctl leading to csum errors
  Btrfs: fix invalid page accesses in extent_same (dedup) ioctl

Pull xfs fix from Dve Chinner:
 "This contains a fix for an endian conversion issue in new CRC
  validation in log recovery that was discovered on a ppc64 platform"

* tag 'xfs-fixes-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
  xfs: fix endianness error when checking log block crc on big endian platforms

Merge tag 'asoc-fix-v4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v4.5

A rather large batch of fixes here, almost all in the Intel driver.
The changes that got merged in this merge window for Skylake were rather
large and as well as issues that you'd expect in a large block of new
code there were some problems created for older processors which needed
fixing up.  Things are largely settling down now hopefully.

This patch fixes vulnerability CVE-2016-2085.  The problem exists
because the vm_verify_hmac() function includes a use of memcmp().
Unfortunately, this allows timing side channel attacks; specifically
a MAC forgery complexity drop from 2^128 to 2^12.  This patch changes
the memcmp() to the cryptographically safe crypto_memneq().
Reported-by: NXiaofei Rex Guo <xiaofei.rex.guo@intel.com>
Signed-off-by: NRyan Ware <ware@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: NJames Morris <james.l.morris@oracle.com>

arch/x86/built-in.o: In function `uv_bios_call':
(.text+0xeba00): undefined reference to `efi_call'
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Suggested-by: N"H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Reviewed-by: NMatt Fleming <matt@codeblueprint.co.uk>
Acked-by: NAlex Thorlton <athorlton@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The pfn_t type uses an unsigned long to store a pfn + flags value.  On a
64-bit platform the upper 12 bits of an unsigned long are never used for
storing the value of a pfn.  However, this is not true on highmem
platforms, all 32-bits of a pfn value are used to address a 44-bit
physical address space.  A pfn_t needs to store a 64-bit value.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=112211
Fixes: 01c8f1c4 ("mm, dax, gpu: convert vm_insert_mixed to pfn_t")
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Reported-by: NStuart Foster <smf.linux@ntlworld.com>
Reported-by: NJulian Margetson <runaway@candw.ms>
Tested-by: NJulian Margetson <runaway@candw.ms>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Mike said:

: CONFIG_UBSAN_ALIGNMENT breaks x86-64 kernel with lockdep enabled, i.  e
: kernel with CONFIG_UBSAN_ALIGNMENT fails to load without even any error
: message.
:
: The problem is that ubsan callbacks use spinlocks and might be called
: before lockdep is initialized.  Particularly this line in the
: reserve_ebda_region function causes problem:
:
: lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES);
:
: If i put lockdep_init() before reserve_ebda_region call in
: x86_64_start_reservations kernel loads well.

Fix this ordering issue permanently: change lockdep so that it uses
hlists for the hash tables.  Unlike a list_head, an hlist_head is in its
initialized state when it is all-zeroes, so lockdep is ready for
operation immediately upon boot - lockdep_init() need not have run.

The patch will also save some memory.

lockdep_init() and lockdep_initialized can be done away with now - a 4.6
patch has been prepared to do this.
Reported-by: NMike Krinkin <krinkin.m.u@gmail.com>
Suggested-by: NMike Krinkin <krinkin.m.u@gmail.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

[akpm@linux-foundation.org: s/threshhold/threshold/]
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This showed up on ARC when running LMBench bw_mem tests as Overlapping
TLB Machine Check Exception triggered due to STLB entry (2M pages)
overlapping some NTLB entry (regular 8K page).

bw_mem 2m touches a large chunk of vaddr creating NTLB entries.  In the
interim khugepaged kicks in, collapsing the contiguous ptes into a
single pmd.  pmdp_collapse_flush()->flush_pmd_tlb_range() is called to
flush out NTLB entries for the ptes.  This for ARC (by design) can only
shootdown STLB entries (for pmd).  The stray NTLB entries cause the
overlap with the subsequent STLB entry for collapsed page.  So make
pmdp_collapse_flush() call pte flush interface not pmd flush.

Note that originally all thp flush call sites in generic code called
flush_tlb_range() leaving it to architecture to implement the flush for
pte and/or pmd.  Commit 12ebc158 changed this by calling a new
opt-in API flush_pmd_tlb_range() which made the semantics more explicit
but failed to distinguish the pte vs pmd flush in generic code, which is
what this patch fixes.

Note that ARC can fixed w/o touching the generic pmdp_collapse_flush()
by defining a ARC version, but that defeats the purpose of generic
version, plus sementically this is the right thing to do.

Fixes STAR 9000961194: LMBench on AXS103 triggering duplicate TLB
exceptions with super pages

Fixes: 12ebc158 ("mm,thp: introduce flush_pmd_tlb_range")
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>	[4.4]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We need to use post-decrement to get percpu_counter_destroy() called on
&wb->stat[0].  Moreover, the pre-decremebt would cause infinite
out-of-bounds accesses if the setup code failed at i==0.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

DAX implements split_huge_pmd() by clearing pmd.  This simple approach
reduces memory overhead, as we don't need to deposit page table on huge
page mapping to make split_huge_pmd() never-fail.  PTE table can be
allocated and populated later on page fault from backing store.

But one side effect is that have to check if pmd is pmd_none() after
split_huge_pmd().  In most places we do this already to deal with
parallel MADV_DONTNEED.

But I found two call sites which is not affected by MADV_DONTNEED (due
down_write(mmap_sem)), but need to have the check to work with DAX
properly.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The kptr_restrict flag, when set to 1, only prints the kernel address
when the user has CAP_SYSLOG.  When it is set to 2, the kernel address
is always printed as zero.  When set to 1, this needs to check whether
or not we're in IRQ.

However, when set to 2, this check is unneccessary, and produces
confusing results in dmesg.  Thus, only make sure we're not in IRQ when
mode 1 is used, but not mode 2.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add missing kernel-doc notation for function parameter 'gfp_mask' to fix
kernel-doc warning.

  mm/filemap.c:1898: warning: No description found for parameter 'gfp_mask'
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When enabling UBSAN_SANITIZE_ALL, the kernel image size gets increased
significantly (~3x).  So, it sounds better to have some note in Kconfig.

And, fixed a typo.
Signed-off-by: NYang Shi <yang.shi@linaro.org>
Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull GPIO fixes from Linus Walleij:
 - Probe errorpath fix for the Altera
 - irqchip ofnode pointer added to the DaVinci driver
 - controller instance number correction for DaVinci

* tag 'gpio-v4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: davinci: Fix the number of controllers allocated
  gpio: davinci: Add the missing of-node pointer
  gpio: gpio-altera: Remove gpiochip on probe failure.

Merge tag 'platform-drivers-x86-v4.5-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x86 platform driver fixes from Darren Hart:
 "Just two small fixes for the 4.5-rc cycle:

  intel_scu_ipcutil:
   - underflow in scu_reg_access()

  intel-hid:
   - fix incorrect entries in intel_hid_keymap"

* tag 'platform-drivers-x86-v4.5-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
  intel_scu_ipcutil: underflow in scu_reg_access()
  intel-hid: fix incorrect entries in intel_hid_keymap

Pull networking fixes from David Miller:

 1) Fix BPF handling of branch offset adjustmnets on backjumps, from
    Daniel Borkmann.

 2) Make sure selinux knows about SOCK_DESTROY netlink messages, from
    Lorenzo Colitti.

 3) Fix openvswitch tunnel mtu regression, from David Wragg.

 4) Fix ICMP handling of TCP sockets in syn_recv state, from Eric
    Dumazet.

 5) Fix SCTP user hmacid byte ordering bug, from Xin Long.

 6) Fix recursive locking in ipv6 addrconf, from Subash Abhinov
    Kasiviswanathan.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  bpf: fix branch offset adjustment on backjumps after patching ctx expansion
  vxlan, gre, geneve: Set a large MTU on ovs-created tunnel devices
  geneve: Relax MTU constraints
  vxlan: Relax MTU constraints
  flow_dissector: Fix unaligned access in __skb_flow_dissector when used by eth_get_headlen
  of: of_mdio: Add marvell, 88e1145 to whitelist of PHY compatibilities.
  selinux: nlmsgtab: add SOCK_DESTROY to the netlink mapping tables
  sctp: translate network order to host order when users get a hmacid
  enic: increment devcmd2 result ring in case of timeout
  tg3: Fix for tg3 transmit queue 0 timed out when too many gso_segs
  net:Add sysctl_max_skb_frags
  tcp: do not drop syn_recv on all icmp reports
  ipv6: fix a lockdep splat
  unix: correctly track in-flight fds in sending process user_struct
  update be2net maintainers' email addresses
  dwc_eth_qos: Reset hardware before PHY start
  ipv6: addrconf: Fix recursive spin lock call

This reverts commit 829b6962.

Revert this change as it causes a sysfs path to change and therefore
introduces and ABI regression. More precisely Android's vold is not being
able to access /sys/module/mmcblk/parameters/perdev_minors any more, since
the path becomes changed to: "/sys/module/mmc_block/..."

Fixes: 829b6962 ("mmc: block: don't use parameter prefix if built as
module")
Reported-by: NJohn Stultz <john.stultz@linaro.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

The value of ctx->pos in the last readdir call is supposed to be set to
INT_MAX due to 32bit compatibility, unless 'pos' is intentially set to a
larger value, then it's LLONG_MAX.

There's a report from PaX SIZE_OVERFLOW plugin that "ctx->pos++"
overflows (https://forums.grsecurity.net/viewtopic.php?f=1&t=4284), on a
64bit arch, where the value is 0x7fffffffffffffff ie. LLONG_MAX before
the increment.

We can get to that situation like that:

* emit all regular readdir entries
* still in the same call to readdir, bump the last pos to INT_MAX
* next call to readdir will not emit any entries, but will reach the
  bump code again, finds pos to be INT_MAX and sets it to LLONG_MAX

Normally this is not a problem, but if we call readdir again, we'll find
'pos' set to LLONG_MAX and the unconditional increment will overflow.

The report from Victor at
(http://thread.gmane.org/gmane.comp.file-systems.btrfs/49500) with debugging
print shows that pattern:

 Overflow: e
 Overflow: 7fffffff
 Overflow: 7fffffffffffffff
 PAX: size overflow detected in function btrfs_real_readdir
   fs/btrfs/inode.c:5760 cicus.935_282 max, count: 9, decl: pos; num: 0;
   context: dir_context;
 CPU: 0 PID: 2630 Comm: polkitd Not tainted 4.2.3-grsec #1
 Hardware name: Gigabyte Technology Co., Ltd. H81ND2H/H81ND2H, BIOS F3 08/11/2015
  ffffffff81901608 0000000000000000 ffffffff819015e6 ffffc90004973d48
  ffffffff81742f0f 0000000000000007 ffffffff81901608 ffffc90004973d78
  ffffffff811cb706 0000000000000000 ffff8800d47359e0 ffffc90004973ed8
 Call Trace:
  [<ffffffff81742f0f>] dump_stack+0x4c/0x7f
  [<ffffffff811cb706>] report_size_overflow+0x36/0x40
  [<ffffffff812ef0bc>] btrfs_real_readdir+0x69c/0x6d0
  [<ffffffff811dafc8>] iterate_dir+0xa8/0x150
  [<ffffffff811e6d8d>] ? __fget_light+0x2d/0x70
  [<ffffffff811dba3a>] SyS_getdents+0xba/0x1c0
 Overflow: 1a
  [<ffffffff811db070>] ? iterate_dir+0x150/0x150
  [<ffffffff81749b69>] entry_SYSCALL_64_fastpath+0x12/0x83

The jump from 7fffffff to 7fffffffffffffff happens when new dir entries
are not yet synced and are processed from the delayed list. Then the code
could go to the bump section again even though it might not emit any new
dir entries from the delayed list.

The fix avoids entering the "bump" section again once we've finished
emitting the entries, both for synced and delayed entries.

References: https://forums.grsecurity.net/viewtopic.php?f=1&t=4284Reported-by: NVictor <services@swwu.com>
CC: stable@vger.kernel.org
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Tested-by: NHolger Hoffstätte <holger.hoffstaette@googlemail.com>
Signed-off-by: NChris Mason <clm@fb.com>

Intel BXT/APL use a card detect GPIO however the host controller
will not enable bus power unless it's card detect also reflects
the presence of a card.  Unfortunately those 2 things race which
can result in commands not starting, after which the controller
does nothing and there is a 10 second wait for the driver's
10-second timer to timeout.

That is fixed by having the driver look also at the present state
register to determine if the card is present.  Consequently, provide
a 'get_cd' mmc host operation for BXT/APL that does that.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Intel BXT/APL use a card detect GPIO however the host controller
will not enable bus power unless it's card detect also reflects
the presence of a card.  Unfortunately those 2 things race which
can result in commands not starting, after which the controller
does nothing and there is a 10 second wait for the driver's
10-second timer to timeout.

That is fixed by having the driver look also at the present state
register to determine if the card is present.  Consequently, provide
a 'get_cd' mmc host operation for BXT/APL that does that.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Drivers may need to provide their own get_cd() mmc host op, but
currently the internals of the current op (sdhci_get_cd()) are
provided by sdhci_do_get_cd() which is also called from
sdhci_request().

To allow override of the get_cd functionality, change sdhci_request()
to call ->get_cd() instead of sdhci_do_get_cd().

Note, in the future the call to ->get_cd() will likely be removed
from sdhci_request() since most drivers don't need actually it.
However this change is being done now to facilitate a subsequent
bug fix.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

In the past, fixes for specific hardware devices were implemented
in sdhci using quirks.  That approach is no longer accepted because
the growing number of quirks was starting to make the code difficult
to understand and maintain.

One alternative to quirks, is to allow drivers to override the default
mmc host operations.  This patch makes it easy to do that, and it is
needed for a subsequent bug fix, for which separate patches are
provided.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Merge branch 'integration-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/fdmanana/linux into for-linus-4.5

Pull rdma fixes from Doug Ledford:
 "A few more minor fixes for rc3:

   - One fix to ipoib
   - One fix to core sysfs code
   - Four patches that resolve an oops found in testing of ocrdma and a
     couple other ocrdma issues"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  RDMA/ocrdma: Fixing ocrdma debugfs directory remove
  RDMA/ocrdma: Fix pkey_index returned by driver in rq work completion
  RDMA/ocrdma: populate max_sge_rd in device attributes
  RDMA/ocrdma: Initialize stats resources in the driver before ib device registration.
  IB/sysfs: remove unused va_list args
  IB/IPoIB: Do not set skb truesize since using one linearskb

radeon and amdgpu fixes for 4.5.  Highlights:
- powerplay fixes for amdgpu
- race fixes in the sub-allocator in radeon and amdgpu
- hibernate fix for amdgpu
- fix a possible circular locking in userptr handling in amdgpu

* 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux: (21 commits)
  drm/amdgpu: fix issue with overlapping userptrs
  drm/radeon: hold reference to fences in radeon_sa_bo_new
  drm/amdgpu: remove unnecessary forward declaration
  drm/amdgpu: hold reference to fences in amdgpu_sa_bo_new (v2)
  drm/amdgpu: fix s4 resume
  drm/amdgpu/cz: plumb pg flags through to powerplay
  drm/amdgpu/tonga: plumb pg flags through to powerplay
  drma/dmgpu: move cg and pg flags into shared headers
  drm/amdgpu: remove unused cg defines
  drm/amdgpu: add a cgs interface to fetch cg and pg flags
  drm/amd/powerplay/tonga: disable vce pg
  drm/amd/powerplay/tonga: disable uvd pg
  drm/amd/powerplay/cz: disable vce pg
  drm/amd/powerplay/cz: disable uvd pg
  drm/amdgpu: be consistent with uvd cg flags
  drm/amdgpu: clean up vce pg flags for cz/st
  drm/amdgpu: handle vce pg flags properly
  drm/amdgpu: handle uvd pg flags properly
  drm/amdgpu/dpm/ci: switch over to the common pcie caps interface
  drm/amdgpu/cik: don't mess with aspm if gpu is root bus
  ...

When ctx access is used, the kernel often needs to expand/rewrite
instructions, so after that patching, branch offsets have to be
adjusted for both forward and backward jumps in the new eBPF program,
but for backward jumps it fails to account the delta. Meaning, for
example, if the expansion happens exactly on the insn that sits at
the jump target, it doesn't fix up the back jump offset.

Analysis on what the check in adjust_branches() is currently doing:

  /* adjust offset of jmps if necessary */
  if (i < pos && i + insn->off + 1 > pos)
    insn->off += delta;
  else if (i > pos && i + insn->off + 1 < pos)
    insn->off -= delta;

First condition (forward jumps):

  Before:                         After:

  insns[0]                        insns[0]
  insns[1] <--- i/insn            insns[1] <--- i/insn
  insns[2] <--- pos               insns[P] <--- pos
  insns[3]                        insns[P]  `------| delta
  insns[4] <--- target_X          insns[P]   `-----|
  insns[5]                        insns[3]
                                  insns[4] <--- target_X
                                  insns[5]

First case is if we cross pos-boundary and the jump instruction was
before pos. This is handeled correctly. I.e. if i == pos, then this
would mean our jump that we currently check was the patchlet itself
that we just injected. Since such patchlets are self-contained and
have no awareness of any insns before or after the patched one, the
delta is correctly not adjusted. Also, for the second condition in
case of i + insn->off + 1 == pos, means we jump to that newly patched
instruction, so no offset adjustment are needed. That part is correct.

Second condition (backward jumps):

  Before:                         After:

  insns[0]                        insns[0]
  insns[1] <--- target_X          insns[1] <--- target_X
  insns[2] <--- pos <-- target_Y  insns[P] <--- pos <-- target_Y
  insns[3]                        insns[P]  `------| delta
  insns[4] <--- i/insn            insns[P]   `-----|
  insns[5]                        insns[3]
                                  insns[4] <--- i/insn
                                  insns[5]

Second interesting case is where we cross pos-boundary and the jump
instruction was after pos. Backward jump with i == pos would be
impossible and pose a bug somewhere in the patchlet, so the first
condition checking i > pos is okay only by itself. However, i +
insn->off + 1 < pos does not always work as intended to trigger the
adjustment. It works when jump targets would be far off where the
delta wouldn't matter. But, for example, where the fixed insn->off
before pointed to pos (target_Y), it now points to pos + delta, so
that additional room needs to be taken into account for the check.
This means that i) both tests here need to be adjusted into pos + delta,
and ii) for the second condition, the test needs to be <= as pos
itself can be a target in the backjump, too.

Fixes: 9bac3d6d ("bpf: allow extended BPF programs access skb fields")
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull input updates from Dmitry Torokhov:
 "Just small driver fixups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: colibri-vf50-ts - add missing #include <linux/of.h>
  Input: adp5589 - fix row 5 handling for adp5589
  Input: edt-ft5x06 - fix setting gain, offset, and threshold via device tree
  Input: vmmouse - fix absolute device registration
  Input: serio - drop warnings in case of EPROBE_DEFER from serio_find_driver()
  Input: cap11xx - add missing of_node_put
  Input: sirfsoc-onkey - allow modular build
  Input: xpad - remove unused function

Pull libata fixes from Tejun Heo:

 - PORTS_IMPL workaround for very early ahci controllers is misbehaving
   on new systems.  Disabled on recent ahci versions.

 - Old-style PIO state machine had a horrible locking problem.  Don't
   know how we've been getting away this far.  Fixed.

 - Other device specific updates.

* 'for-4.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ahci: Intel DNV device IDs SATA
  libata: fix sff host state machine locking while polling
  libata-sff: use WARN instead of BUG on illegal host state machine state
  libata: disable forced PORTS_IMPL for >= AHCI 1.3
  libata: blacklist a Viking flash model for MWDMA corruption
  drivers: ata: wake port before DMA stop for ALPM