- 17 12月, 2014 14 次提交
-
-
由 Or Gerlitz 提交于
The current implementations all use dev_uc_add_excl() and such whose API doesn't support vlans, so we can't make it with NICs HW for now. Fixes: f6f6424b ('net: make vid as a parameter for ndo_fdb_add/ndo_fdb_del') Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NJiri Pirko <jiri@resnulli.us> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Shamay 提交于
This commit contains 2 fixes for the 128B CQE/EQE stride feaure. Wei found that mlx4_QUERY_HCA function marked the wrong capability in flags (64B CQE/EQE), when CQE/EQE stride feature was enabled. Also added small fix in initial CQE ownership bit assignment, when CQE is size is not default 32B. Fixes: 77507aa2 (net/mlx4: Enable CQE/EQE stride support) Signed-off-by: NWei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: NIdo Shamay <idos@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nimrod Andy 提交于
Do camera capture test on i.MX6q sabresd board, and save the capture data to nfs rootfs. The command is: gst-launch-1.0 -e imxv4l2src device=/dev/video1 num-buffers=2592000 ! tee name=t ! queue ! imxv4l2sink sync=false t. ! queue ! vpuenc ! queue ! mux. pulsesrc num-buffers=3720937 blocksize=4096 ! 'audio/x-raw, rate=44100, channels=2' ! queue ! imxmp3enc ! mpegaudioparse ! queue ! mux. qtmux name=mux ! filesink location=video_recording_long.mov After about 10 hours running, there have net watchdog timeout kernel dump: ... WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:264 dev_watchdog+0x2b4/0x2d8() NETDEV WATCHDOG: eth0 (fec): transmit queue 0 timed out CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.14.24-01051-gdb840b7 #440 [<80014e6c>] (unwind_backtrace) from [<800118ac>] (show_stack+0x10/0x14) [<800118ac>] (show_stack) from [<806ae3f0>] (dump_stack+0x78/0xc0) [<806ae3f0>] (dump_stack) from [<8002b504>] (warn_slowpath_common+0x68/0x8c) [<8002b504>] (warn_slowpath_common) from [<8002b558>] (warn_slowpath_fmt+0x30/0x40) [<8002b558>] (warn_slowpath_fmt) from [<8055e0d4>] (dev_watchdog+0x2b4/0x2d8) [<8055e0d4>] (dev_watchdog) from [<800352d8>] (call_timer_fn.isra.33+0x24/0x8c) [<800352d8>] (call_timer_fn.isra.33) from [<800354c4>] (run_timer_softirq+0x184/0x220) [<800354c4>] (run_timer_softirq) from [<8002f420>] (__do_softirq+0xc0/0x22c) [<8002f420>] (__do_softirq) from [<8002f804>] (irq_exit+0xa8/0xf4) [<8002f804>] (irq_exit) from [<8000ee5c>] (handle_IRQ+0x54/0xb4) [<8000ee5c>] (handle_IRQ) from [<80008598>] (gic_handle_irq+0x28/0x5c) [<80008598>] (gic_handle_irq) from [<800123c0>] (__irq_svc+0x40/0x74) Exception stack(0x80d27f18 to 0x80d27f60) 7f00: 80d27f60 0000014c 7f20: 8858c60e 0000004d 884e4540 0000004d ab7250d0 80d34348 00000000 00000000 7f40: 00000001 00000000 00000017 80d27f60 800702a4 80476e6c 600f0013 ffffffff [<800123c0>] (__irq_svc) from [<80476e6c>] (cpuidle_enter_state+0x50/0xe0) [<80476e6c>] (cpuidle_enter_state) from [<80476fa8>] (cpuidle_idle_call+0xac/0x154) [<80476fa8>] (cpuidle_idle_call) from [<8000f174>] (arch_cpu_idle+0x8/0x44) [<8000f174>] (arch_cpu_idle) from [<80064c54>] (cpu_startup_entry+0x100/0x158) [<80064c54>] (cpu_startup_entry) from [<80cd8a9c>] (start_kernel+0x304/0x368) ---[ end trace 09ebd32fb032f86d ]--- ... There might have a race in napi_schedule(), leaving interrupts disabled forever. After these patch, the case still work more than 40 hours running. Signed-off-by: NFugang Duan <B38611@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Vrabel 提交于
After d75b1ade (net: less interrupt masking in NAPI) the napi instance is removed from the per-cpu list prior to calling the n->poll(), and is only requeued if all of the budget was used. This inadvertently broke netfront because netfront does not use NAPI correctly. If netfront had not used all of its budget it would do a final check for any Rx responses and avoid calling napi_complete() if there were more responses. It would still return under budget so it would never be rescheduled. The final check would also not re-enable the Rx interrupt. Additionally, xenvif_poll() would also call napi_complete() /after/ enabling the interrupt. This resulted in a race between the napi_complete() and the napi_schedule() in the interrupt handler. The use of local_irq_save/restore() avoided by race iff the handler is running on the same CPU but not if it was running on a different CPU. Fix both of these by always calling napi_compete() if the budget was not all used, and then calling napi_schedule() if the final checks says there's more work. Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
The encap->type comes straight from Netlink. Validate it against max supported encap types just like ip_encap_hlen() already does. Fixes: a8c5f9 ("ip_tunnel: Ops registration for secondary encap (fou, gue)") Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
The symbols are exported and could be used by external modules. Fixes: a8c5f9 ("ip_tunnel: Ops registration for secondary encap (fou, gue)") Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless由 David S. Miller 提交于
John W. Linville says: ==================== pull request: wireless 2014-12-16 Please pull this batch of fixes intended for the 3.19 stream! For the Bluetooth bits, Johan says: "The patches consist of: - Coccinelle warning fix - hci_dev_lock/unlock fixes - Fixes for pending mgmt command handling - Fixes for properly following the force_lesc_support switch - Fix for a Microsoft branded Broadcom adapter - New device id for Atheros AR3012 - Fix for BR/EDR Secure Connections enabling" Along with that... Brian Norris avoids leaking some kernel memory contents via printk in brcmsmac. Julia Lawall corrects some misspellings in a few drivers. Larry Finger gives us one more rtlwifi fix to correct a porting oversight. Wei Yongjun fixes a sparse warning in rtlwifi. Please let me know if there are problems! ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Otherwise we get things like: warning: (NET_DSA_BCM_SF2 && BCMGENET && SYSTEMPORT) selects FIXED_PHY which has unmet direct dependencies (NETDEVICES && PHYLIB=y) In order to make this work we have to rename fixed.c to fixed_phy.c because the regulator drivers already have a module named "fixed.o". Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Michael S. Tsirkin says: ==================== tun/macvtap: TUNSETIFF fixes Dan Carpenter reported the following: static checker warning: drivers/net/tun.c:1694 tun_set_iff() warn: 0x17100 is larger than 16 bits drivers/net/tun.c 1692 1693 tun->flags = (tun->flags & ~TUN_FEATURES) | 1694 (ifr->ifr_flags & TUN_FEATURES); 1695 It's complaining because the "ifr->ifr_flags" variable is a short (should it be unsigned?). The new define: #define IFF_VNET_LE 0x10000 doesn't fit in two bytes. Other suspect looking code could be: return __virtio16_to_cpu(q->flags & IFF_VNET_LE, val); And that's true: we have run out of IFF flags in tun. So let's not try to add more: add simple GET/SET ioctls instead. Easy to test, leads to clear semantics. Alternatively we'll have to revert the whole thing for 3.19, but that seems more work as this has dependencies in other places. While here, I noticed that macvtap was actually reading ifreq flags as a 32 bit field. Fix that up as well. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael S. Tsirkin 提交于
Everyone should use TUNSETVNETLE/TUNGETVNETLE instead. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael S. Tsirkin 提交于
Use TUNSETVNETLE/TUNGETVNETLE instead. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael S. Tsirkin 提交于
Use TUNSETVNETLE/TUNGETVNETLE instead. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael S. Tsirkin 提交于
ifreq flags field is only 16 bit wide, so setting IFF_VNET_LE there has no effect: doesn't fit in two bytes. The tests passed apparently because they have an even number of bugs, all cancelling out. Luckily we didn't release a kernel with this flag, so it's not too late to fix this. Add TUNSETVNETLE/TUNGETVNETLE to really achieve the purpose of IFF_VNET_LE. This has an added benefit that if we ever want a BE flag, we won't have to deal with weird configurations like setting both LE and BE at the same time. IFF_VNET_LE will be dropped in a follow-up patch. Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael S. Tsirkin 提交于
flags field in ifreq is only 16 bit wide, but we read it as a 32 bit value. If userspace doesn't zero-initialize unused fields, this will lead to failures. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 12月, 2014 23 次提交
-
-
由 David S. Miller 提交于
Florian Fainelli says: ==================== net: broadcom: fix FIXED_PHY dependencies This patch series removes the bogus "select FIXED_PHY if FOO=y" that I have been using in GENET, SYSTEMPORT and the SF2 DSA switch driver. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
There is no need to do the following: select FIXED_PHY if NET_DSA_BCM_SF2=y, as this implies that we will not be able to build and/or run the driver correctly when built as a module, which is no longer an issue since commit 37e9a690 ("net: phy: export fixed_phy_register()"). Fixes: 246d7f77 ("net: dsa: add Broadcom SF2 switch driver") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
There is no need to do the following: select FIXED_PHY if SYSTEMPORT=y, as this implies that we will not be able to build and/or run the driver correctly when built as a module, which is no longer an issue since commit 37e9a690 ("net: phy: export fixed_phy_register()") Fixes: a3862db2 ("net: systemport: hook SYSTEMPORT driver in the build") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
There is no need to do the following: select FIXED_PHY if BCMGENET=y, as this implies that we will not be able to build and/or run the driver correctly when built as a module, which is no longer an issue since commit 37e9a690 ("net: phy: export fixed_phy_register()") Fixes: b0ba512e225d ("net: bcmgenet: enable driver to work without device tree" Fixes: bdaa53bd ("net: bcmgenet: hook into the build system") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Larry Finger 提交于
The setting of this flag was missed in previous modifications. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Brian Norris 提交于
Debug code prints the fifo name via custom dev_warn() wrappers. The fifo_names array is only non-zero when debugging is manually enabled, which is all well and good. However, it's *not* good that this array uses zero-length arrays in the non-debug case, and so it doesn't actually have any memory allocated to it. This means that as far as we know, fifo_names[i] actually points to garbage memory. I've seen this in my log: [ 4601.205511] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: �GeL txop exceeded phylen 137/256 dur 1602/1504 So let's give this array space enough to fill it with a NULL byte. Signed-off-by: NBrian Norris <computersforpeace@gmail.com> Cc: Brett Rudley <brudley@broadcom.com> Cc: Arend van Spriel <arend@broadcom.com> Cc: "Franky (Zhenhui) Lin" <frankyl@broadcom.com> Cc: Hante Meuleman <meuleman@broadcom.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: brcm80211-dev-list@broadcom.com Cc: netdev@vger.kernel.org Acked-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wei Yongjun 提交于
Fixes the following sparse warning: drivers/net/wireless/rtlwifi/rtl8192cu/hw.c:1595:6: warning: symbol 'usb_cmd_send_packet' was not declared. Should it be static? Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Julia Lawall 提交于
Replace a misspelled function name by %s and then __func__. 8821 was written as 8812. This was done using Coccinelle, including the use of Levenshtein distance, as proposed by Rasmus Villemoes. Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Julia Lawall 提交于
Replace a misspelled function name by %s and then __func__. This was done using Coccinelle, including the use of Levenshtein distance, as proposed by Rasmus Villemoes. Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Julia Lawall 提交于
Replace a misspelled function name by %s and then __func__. This was done using Coccinelle, including the use of Levenshtein distance, as proposed by Rasmus Villemoes. Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
-
由 David S. Miller 提交于
Cyrille Pitchen says: ==================== net/macb: fix multiqueue support patch up This series of patches is a fixup for the multiqueue support patch. The first patch fixes a bug introduced by the multiqueue support patch. The second one doesn't fix a bug but simplify the source code by removing useless calls to devm_free_irq() since we use managed device resources for IRQs. They were applied on the net-next tree and tested with a sama5d36ek board. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cyrille Pitchen 提交于
Inside macb_probe(), when devm_request_irq() fails on queue q, there is no need to call devm_free_irq() on queues 0..q-1 because the managed device resources are released later when calling free_netdev(). Also removing devm_free_irq() call from macb_remove() for the same reason. Signed-off-by: NCyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cyrille Pitchen 提交于
fix a bug introduced by the multiqueue support patch: "net/macb: add TX multiqueue support for gem" the "bp" pointer to the netdev private data was dereferenced and used after the associated memory had been freed by calling free_netdev(). Signed-off-by: NCyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geert Uytterhoeven 提交于
net/rds/message.c: In function ‘rds_message_inc_copy_to_user’: net/rds/message.c:328: warning: comparison of distinct pointer types lacks a cast Use min_t(unsigned long, ...) like is done in rds_message_copy_from_user(). Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geert Uytterhoeven 提交于
If CONFIG_OF is not set: drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c: In function ‘sti_dwmac_parse_data’: drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c:318: warning: ‘rs’ is used uninitialized in this function of_property_read_string() will return -ENOSYS in this case, and rs will be an uninitialized pointer. While the fallback clock selection is already selected correctly in this case, the string comparisons should be skipped too, else the system will crash while dereferencing the uninitialized pointer. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tobias Klauser 提交于
If GPIOLIB=n the following build errors occur: drivers/net/ethernet/smsc/smc91x.c: In function 'try_toggle_control_gpio': drivers/net/ethernet/smsc/smc91x.c:2204:2: error: implicit declaration of function 'devm_gpiod_get_index' [-Werror=implicit-function-declaration] drivers/net/ethernet/smsc/smc91x.c:2204:7: warning: assignment makes pointer from integer without a cast [enabled by default] drivers/net/ethernet/smsc/smc91x.c:2213:2: error: implicit declaration of function 'gpiod_direction_output' [-Werror=implicit-function-declaration] drivers/net/ethernet/smsc/smc91x.c:2216:3: error: implicit declaration of function 'devm_gpiod_put' [-Werror=implicit-function-declaration] drivers/net/ethernet/smsc/smc91x.c:2222:2: error: implicit declaration of function 'gpiod_set_value_cansleep' [-Werror=implicit-function-declaration] Fix this by letting the driver depend on GPIOLIB if OF is selected. Fixes: 7d2911c4 ("net: smc91x: Fix gpios for device tree based booting") Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Timo Teräs 提交于
The NBMA GRE tunnels temporarily push GRE header that contain the per-packet NBMA destination on the skb via header ops early in xmit path. It is the later pulled before the real GRE header is constructed. The inner mac was thus set differently in nbma case: the GRE header has been pushed by neighbor layer, and mac header points to beginning of the temporary gre header (set by dev_queue_xmit). Now that the offloads expect mac header to point to the gre payload, fix the xmit patch to: - pull first the temporary gre header away - and reset mac header to point to gre payload This fixes tso to work again with nbma tunnels. Fixes: 14051f04 ("gre: Use inner mac length when computing tunnel length") Signed-off-by: NTimo Teräs <timo.teras@iki.fi> Cc: Tom Herbert <therbert@google.com> Cc: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Duan Jiong 提交于
Fix the typo, there should be "It". On the other hand, fix whitespace errors detected by checkpatch.pl Signed-off-by: NDuan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Asaf Vertz 提交于
To be future-proof and for better readability the time comparisons are modified to use time_before, time_after, and time_after_eq instead of plain, error-prone math. Signed-off-by: NAsaf Vertz <asaf.vertz@tandemg.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Or Gerlitz says: ==================== mlx4 driver fixes for 3.19-rc1 Just fixes for two small issues introduced in the 3.19 merge window ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
To support asymmetric EQ allocations, we should query the device capabilities prior to enabling SRIOV. As a side effect of adding that, we are dumping the PF device capabilities twice. Avoid that by moving the printing into a helper function which is called once. Fixes: 7ae0e400 ('net/mlx4_core: Flexible (asymmetric) allocation of EQs and MSI-X vectors for PF/VFs') Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matan Barak 提交于
The current mlx4_load_one has a memory leak as it always allocates dev_cap, but frees it only on error. In addition, even if VFs exist when mlx4_load_one is called, we still need to notify probed VFs that we're loading (by incrementing pf_loading). Fixes: a0eacca9 ('net/mlx4_core: Refactor mlx4_load_one') Signed-off-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 12月, 2014 3 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security由 Linus Torvalds 提交于
Pull security layer updates from James Morris: "In terms of changes, there's general maintenance to the Smack, SELinux, and integrity code. The IMA code adds a new kconfig option, IMA_APPRAISE_SIGNED_INIT, which allows IMA appraisal to require signatures. Support for reading keys from rootfs before init is call is also added" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (23 commits) selinux: Remove security_ops extern security: smack: fix out-of-bounds access in smk_parse_smack() VFS: refactor vfs_read() ima: require signature based appraisal integrity: provide a hook to load keys when rootfs is ready ima: load x509 certificate from the kernel integrity: provide a function to load x509 certificate from the kernel integrity: define a new function integrity_read_file() Security: smack: replace kzalloc with kmem_cache for inode_smack Smack: Lock mode for the floor and hat labels ima: added support for new kernel cmdline parameter ima_template_fmt ima: allocate field pointers array on demand in template_desc_init_fields() ima: don't allocate a copy of template_fmt in template_desc_init_fields() ima: display template format in meas. list if template name length is zero ima: added error messages to template-related functions ima: use atomic bit operations to protect policy update interface ima: ignore empty and with whitespaces policy lines ima: no need to allocate entry for comment ima: report policy load status ima: use path names cache ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Pull char/misc driver updates from Greg KH: "Here's the big char/misc driver update for 3.19-rc1 Lots of little things all over the place in different drivers, and a new subsystem, "coresight" has been added. Full details are in the shortlog" * tag 'char-misc-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (73 commits) parport: parport_pc, do not remove parent devices early spmi: Remove shutdown/suspend/resume kernel-doc carma-fpga-program: drop videobuf dependency carma-fpga: drop videobuf dependency carma-fpga-program.c: fix compile errors i8k: Fix temperature bug handling in i8k_get_temp() cxl: Name interrupts in /proc/interrupt CXL: Return error to PSL if IRQ demultiplexing fails & print clearer warning coresight-replicator: remove .owner field for driver coresight: fixed comments in coresight.h coresight: fix typo in comment in coresight-priv.h coresight: bindings for coresight drivers coresight: Adding ABI documentation w1: support auto-load of w1_bq27000 module. w1: avoid potential u16 overflow cn: verify msg->len before making callback mei: export fw status registers through sysfs mei: read and print all six FW status registers mei: txe: add cherrytrail device id mei: kill cached host and me csr values ...
-
由 Linus Torvalds 提交于
Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
-