- 03 8月, 2010 1 次提交
-
-
由 Sam Ravnborg 提交于
It is now possible to assign options to AS, CC and LD on the command line - which is only used when building modules. {A,C,LD}FLAGS_MODULE was all used both in the top-level Makefile in the arch makefiles, thus users had no way to specify additional options to AS, CC, LD when building modules without overriding the original value. Introduce a new set of variables KBUILD_{A,C,LD}FLAGS_MODULE that is used by arch specific files and free up {A,C,LD}FLAGS_MODULE so they can be assigned on the command line. All arch Makefiles that used the old variables has been updated. Note: Previously we had a MODFLAGS variable for both AS and CC. But in favour of consistency this was dropped. So in some cases arch Makefile has one assignmnet replaced by two assignmnets. Note2: MODFLAGS was not documented and is dropped without any notice. I do not expect much/any breakage from this. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Chen Liqin <liqin.chen@sunplusct.com> Acked-by: Mike Frysinger <vapier@gentoo.org> [blackfin] Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [avr32] Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 29 4月, 2008 1 次提交
-
-
由 Adrian Bunk 提交于
With using KBUILD_DEFCONFIG we don't have to ship a second copy of m32700ut.smp_defconfig Signed-off-by: NAdrian Bunk <bunk@kernel.org> Acked-by: NHirokazu Takata <takata@linux-m32r.org>
-
- 16 10月, 2007 1 次提交
-
-
由 Sam Ravnborg 提交于
The variable AFLAGS is a wellknown variable and the usage by kbuild may result in unexpected behaviour. On top of that several people over time has asked for a way to pass in additional flags to gcc. This patch replace use of AFLAGS with KBUILD_AFLAGS all over the tree. Patch was tested on following architectures: alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k, s390 Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 15 10月, 2007 1 次提交
-
-
由 Sam Ravnborg 提交于
The variable CFLAGS is a wellknown variable and the usage by kbuild may result in unexpected behaviour. On top of that several people over time has asked for a way to pass in additional flags to gcc. This patch replace use of CFLAGS with KBUILD_CFLAGS all over the tree and enabling one to use: make CFLAGS=... to specify additional gcc commandline options. One usecase is when trying to find gcc bugs but other use cases has been requested too. Patch was tested on following architectures: alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k Test was simple to do a defconfig build, apply the patch and check that nothing got rebuild. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 03 9月, 2007 1 次提交
-
-
由 Hirokazu Takata 提交于
Rearrange platform-dependent codes from arch/m32r/kernel/*.c to arch/m32r/platforms/{platform}/. Signed-off-by: NHirokazu Takata <takata@linux-m32r.org>
-
- 12 2月, 2007 1 次提交
-
-
由 Hirokazu Takata 提交于
This patch fixes the kernel entry point address of vmlinux. The m32r kernel entry address is 0x08002000 (physical). But, so far, the ENTRY point written in vmlinux.lds.S was not point the correct kernel entry address. (before fix) $ objdump -x vmlinux vmlinux: file format elf32-m32r-linux vmlinux architecture: m32r2, flags 0x00000112: EXEC_P, HAS_SYMS, D_PAGED start address 0x88002090 /* NG */ : Sections: Idx Name Size VMA LMA File off Algn 0 .empty_zero_page 00001000 88001000 88001000 00001000 2**12 CONTENTS, ALLOC, LOAD, DATA 1 .boot 0000008c 88002000 88002000 00002000 2**2 CONTENTS, ALLOC, LOAD, READONLY, CODE 2 .text 001ab694 88002090 88002090 00002090 2**4 CONTENTS, ALLOC, LOAD, READONLY, CODE : (after fix) $ objdump -x vmlinux vmlinux: file format elf32-m32r-linux vmlinux architecture: m32r2, flags 0x00000112: EXEC_P, HAS_SYMS, D_PAGED start address 0x08002000 /* OK */ : This fix also remedies the following GDB error message (of gdb-6.4 or after) at the first operation of kernel debugging: "Previous frame identical to this frame (corrupt stack?)". Signed-off-by: NHirokazu Takata <takata@linux-m32r.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 06 3月, 2006 1 次提交
-
-
由 Paul Smith 提交于
The kbuild system takes advantage of an incorrect behavior in GNU make. Once this behavior is fixed, all files in the kernel rebuild every time, even if nothing has changed. This patch ensures kbuild works with both the incorrect and correct behaviors of GNU make. For more details on the incorrect behavior, see: http://lists.gnu.org/archive/html/bug-make/2006-03/msg00003.html Changes in this patch: - Keep all targets that are to be marked .PHONY in a variable, PHONY. - Add .PHONY: $(PHONY) to mark them properly. - Remove any $(PHONY) files from the $? list when determining whether targets are up-to-date or not. Signed-off-by: NPaul Smith <psmith@gnu.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 25 2月, 2006 1 次提交
-
-
由 Hirokazu Takata 提交于
Add -O2 option to AFLAGS to enable asm code optimization for m32r. On m32r gas, "-m32r2 -O" option enables assembler's parallel code generation optimization for M32R2 ISA as a default. So, "-no-parallel" option is required explicitly for a cpu core with single instuction issuing, for example, VDEC2. Signed-off-by: NHirokazu Takata <takata@linux-m32r.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 27 9月, 2005 1 次提交
-
-
由 Al Viro 提交于
We do _not_ need "sparse" in sparse arguments ;-) What we do need is __BIG_ENDIAN__; right now unconditional, when m32r starts using CPU_LITTLE_ENDIAN, we'll need to adjust. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-