* 'next-i2c' of git://aeryn.fluff.org.uk/bjdooks/linux:
  i2c-stu300: Make driver depend on MACH_U300
  i2c-s3c2410: use resource_size()
  i2c: Use resource_size macro
  i2c: ST DDC I2C U300 bus driver v3
  i2c-bfin-twi: pull in io.h for ioremap()

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon: switch to using late_initcall
  radeon legacy chips: tv dac bg/dac adj updates
  drm/radeon: introduce kernel modesetting for radeon hardware
  drm: Add the TTM GPU memory manager subsystem.
  drm: Memory fragmentation from lost alignment blocks
  drm/radeon: fix mobility flags on new PCI IDs.

Authentication error abort codes should be translated to appropriate
Linux error codes, rather than all being translated to EREMOTEIO - which
indicates that the server had internal problems.

Additionally, a server shouldn't be marked unavailable and the next
server tried if an authentication error occurs.  This will quickly make
all the servers unavailable to the client.  Instead the error should be
returned straight to the user.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Connections that have seen a connection-level abort should not be reused
as the far end will just abort them again; instead a new connection
should be made.

Connection-level aborts occur due to such things as authentication
failures.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (425 commits)
  V4L/DVB (11870): gspca - main: VIDIOC_ENUM_FRAMESIZES ioctl added.
  V4L/DVB (12004): poll method lose race condition
  V4L/DVB (11894): flexcop-pci: dmesg visible names broken
  V4L/DVB (11892): Siano: smsendian - declare function as extern
  V4L/DVB (11891): Siano: smscore - bind the GPIO SMS protocol
  V4L/DVB (11890): Siano: smscore - remove redundant code
  V4L/DVB (11889): Siano: smsdvb - add DVB v3 events
  V4L/DVB (11888): Siano: smsusb - remove redundant ifdef
  V4L/DVB (11887): Siano: smscards - add board (target) events
  V4L/DVB (11886): Siano: smscore - fix some new GPIO definitions names
  V4L/DVB (11885): Siano: Add new GPIO management interface
  V4L/DVB (11884): Siano: smssdio - revert to stand alone module
  V4L/DVB (11883): Siano: cards - add two additional (USB) devices
  V4L/DVB (11824): Siano: smsusb - change exit func debug msg
  V4L/DVB (11823): Siano: smsusb - fix typo in module description
  V4L/DVB (11822): Siano: smscore - bug fix at get_device_mode
  V4L/DVB (11821): Siano: smscore - fix isdb-t firmware name
  V4L/DVB (11820): Siano: smscore - fix byte ordering bug
  V4L/DVB (11819): Siano: smscore - fix get_common_buffer bug
  V4L/DVB (11818): Siano: smscards - assign gpio to HPG targets
  ...

Some architectures need to initialize SLAB caches to be able
to allocate page tables. They do that from pgtable_cache_init()
so the later should be called earlier now, best is before
vmalloc_init().
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* akpm: (182 commits)
  fbdev: bf54x-lq043fb: use kzalloc over kmalloc/memset
  fbdev: *bfin*: fix __dev{init,exit} markings
  fbdev: *bfin*: drop unnecessary calls to memset
  fbdev: bfin-t350mcqb-fb: drop unused local variables
  fbdev: blackfin has __raw I/O accessors, so use them in fb.h
  fbdev: s1d13xxxfb: add accelerated bitblt functions
  tcx: use standard fields for framebuffer physical address and length
  fbdev: add support for handoff from firmware to hw framebuffers
  intelfb: fix a bug when changing video timing
  fbdev: use framebuffer_release() for freeing fb_info structures
  radeon: P2G2CLK_ALWAYS_ONb tested twice, should 2nd be P2G2CLK_DAC_ALWAYS_ONb?
  s3c-fb: CPUFREQ frequency scaling support
  s3c-fb: fix resource releasing on error during probing
  carminefb: fix possible access beyond end of carmine_modedb[]
  acornfb: remove fb_mmap function
  mb862xxfb: use CONFIG_OF instead of CONFIG_PPC_OF
  mb862xxfb: restrict compliation of platform driver to PPC
  Samsung SoC Framebuffer driver: add Alpha Channel support
  atmel-lcdc: fix pixclock upper bound detection
  offb: use framebuffer_alloc() to allocate fb_info struct
  ...

Manually fix up conflicts due to kmemcheck in mm/slab.c

Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The remove member of the platform_driver bfin_t350mcqb_driver should use
__devexit_p() to refer to the remove function, and that function should
get __devexit markings.  Likewise, the probe function should be marked
with __devinit and not __init.

Also, module_init() functions should be marked with __init rather than
__devinit.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The dma_alloc_* functions sets the memory to 0 before returning so there
is no need to call memset after the allocation.  Also no point in clearing
the memory when disabling the buffer.
Signed-off-by: NVivek Kutal <vivek.kutal@azingo.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The local fbinfo/info vars in the suspend functions don't actually get
used which cause ugly gcc warnings, so drop them.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add accelerated bitblt functions to s1d13xxx based video chipsets, more
specificly functions copyarea and fillrect.

It has only been tested and activated for 13506 chipsets but is expected
to work for the majority of s1d13xxx based chips.  This patch also cleans
up the driver with respect of whitespaces and other formatting issues.  We
update the current status comments.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NKristoffer Ericson <kristoffer.ericson@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use standard fields fbinfo.fix.smem_start and fbinfo.fix.smem_len for
physical address and length of framebuffer.

This also fixes output of the 'fbset -i' command - address and length of
the framebuffer are displayed correctly.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With KMS we have ran into an issue where we really want the KMS fb driver
to be the one running the console, so panics etc can be shown by switching
out of X etc.

However with vesafb/efifb built-in, we end up with those on fb0 and the
KMS fb driver on fb1, driving the same piece of hw, so this adds an fb
info flag to denote a firmware fbdev, and adds a new aperture base/size
range which can be compared when the hw drivers are installed to see if
there is a conflict with a firmware driver, and if there is the firmware
driver is unregistered and the hw driver takes over.

It uses new aperture_base/size members instead of comparing on the fix
smem_start/length, as smem_start/length might for example only cover the
first 1MB of the PCI aperture, and we could allocate the kms fb from 8MB
into the aperture, thus they would never overlap.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NDave Airlie <airlied@redhat.com>
Acked-by: NPeter Jones <pjones@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When changing video timing dynamically via fbset the screen sporadically
is rendered black.

With the attached fix which disables VCO prior to timing register change
the problem disappears.

I had a look at the Xserver register setup code. Here the VCO is
disabled in the same way [1].

This patch is taken from vga-sync-field version 0.0.11 [2][3].

[1] http://cgit.freedesktop.org/xorg/driver/xf86-video-intel/tree/src/i830_=
driver.c
[2] http://lowbyte.de/vga-sync-fields/vga-sync-fields-0.0.11.tgz
[3] http://easy-vdr.de/git?p=frc.git/.git;a=commit;h=dcc3b863e5a663652587619c357bd20075af6896
2587619c357bd20075af6896
Signed-off-by: NThomas Hilber <sparkie@lowbyte.de>
Signed-off-by: NPaul Menzel <paulepanter@users.sourceforge.net>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use the framebuffer_release() for freeing fb_info structures allocated
with framebuffer_alloc().
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

P2G2CLK_ALWAYS_ONb is tested twice, 2nd should be P2G2CLK_DAC_ALWAYS_ONb.

[akpm@linux-foundation.org: remove duplicated bitwise-OR of PIXCLKS_CNTL__R300_P2G2CLK_ALWAYS_ONb too]
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add support for CPU frequency scaling in the S3C24XX video driver.
Signed-off-by: NSimtec Linux Team <linux@simtec.co.uk>
Signed-off-by: NBen Dooks <ben@simtec.co.uk>
Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

All resources are released in s3c_fb_win_release so remove other places of
resources releasing.  Add releasing of an allocated fb_info structure as
well.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This check is off-by-one.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The driver's fb_mmap function is essentially the same as a generic fb_mmap
function.  Delete driver's function and use the generic one.

A difference is that generic function marks frame buffer memory as VM_IO |
VM_RESERVED.  The driver's function marks it as VM_IO only.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With this change, the driver builds fine on Microblaze, which helps
allyesconfig compile tests.

I did not test sparc, but the change should have the same effect there.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NAnatolij Gustschin <agust@denx.de>
Tested-by: NAnatolij Gustschin <agust@denx.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The OpenFirmware part of this driver is uncompilable on SPARC due to it's
dependance on several PPC specific functions.

Restricting this to PPC to prevent these build errors:
  CC      drivers/video/mb862xx/mb862xxfb.o
drivers/video/mb862xx/mb862xxfb.c: In function 'of_platform_mb862xx_probe':
drivers/video/mb862xx/mb862xxfb.c:559: error: implicit declaration of function 'of_address_to_resource'
drivers/video/mb862xx/mb862xxfb.c:575: error: 'NO_IRQ' undeclared (first use in this function)
drivers/video/mb862xx/mb862xxfb.c:575: error: (Each undeclared identifier is reported only once
drivers/video/mb862xx/mb862xxfb.c:575: error: for each function it appears in.)

This was found using randconfig builds.
Signed-off-by: NJulian Calaby <julian.calaby@gmail.com>
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add support for the ARGB1888 and ARGB4888 hardware to the Samsung SoC
Framebuffer driver (s3c-fb.c).

ARGB1888 and ARGB4888 is decided by var->transp.length and this variable
is set by s3c_fb_check_var().

In s3c_fb_check_var(), if var->vits_per_pixel is 25 or 28, then
var->transp.length would be 1 or 3.

Therefore alpha mode(ARGB1888 or ARGB4888) could be decided through that
variable.

For using alpha mode, you need to set the following: This code should be
added to your machine code as platform data.

static struct s3c_fb_pd_win xxx_fb_win0 = {
	/* this is to ensure we use win0 */
	.win_mode = {
		.pixclock		= (8+8+8+240)*(38+4+38+400),
		.left_margin	= 8,
		.right_margin	= 8,
		.upper_margin	= 38,
		.lower_margin	= 38,
		.hsync_len		= 8,
		.vsync_len		= 4,
		.xres			= 240,
		.yres			= 400,
	},
	.max_bpp		= 32,
	.default_bpp	= 24,
};

static struct s3c_fb_pd_win xxx_fb_win1 = {
	.win_mode = {
		.pixclock		= (8+8+8+240)*(38+4+38+400),
		.left_margin	= 8,
		.right_margin	= 8,
		.upper_margin	= 38,
		.lower_margin	= 38,
		.hsync_len		= 8,
		.vsync_len		= 4,
		.xres			= 240,
		.yres			= 400,
	},
	.max_bpp		= 32,
	.default_bpp	= 28,
};

static struct s3c_fb_platdata xxx_lcd_pdata __initdata = {
	.win[0]		= &ncp_fb_win0,
	.win[1]		= &ncp_fb_win1,
	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
	.setup_gpio	= xxx_fb_gpio_setup,
};

s3c_fb_set_platdata(&xxx_lcd_pdata);

The above code sets pixelformat for window0 layer to RGB888 and window1
layer to ARGB4888.
Signed-off-by: NInKi Dae <inki.dae@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kyungmin Park <kmpark@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

AFAICT the code which checks that the requested pixclock value is within
bounds is incorrect.  It ensures that the lcdc core clock is at least
(bytes per pixel) times higher than the pixel clock rather than just
greater than or equal to.

There are tighter restrictions on the pixclock value as a function of bus
width for STN panels but even then it isn't a simple relationship as
currently checked for.  IMO either something like the below patch should
be applied or else more detailed checking logic should be implemented
which takes in to account the panel type as well.
Signed-off-by: NBen Nizette <bn@niasdigital.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: Daniel Glockner <dg@emlix.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use the framebuffer_alloc() function to allocate the fb_info structure so
the structure is correctly initialized after allocation.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use the framebuffer_alloc() function to allocate the fb_info
structure so the structure is correctly initialized after allocation.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The removed assignment is done inside the framebuffer_alloc() earlier.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NPaul Menzel <paulepanter@users.sourceforge.net>
Cc: Gerd Knorr <kraxel@goldbach.in-berlin.de>
Cc: Nico Schmoigl <schmoigl@rumms.uni-mannheim.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch was taken from vga-sync-field version 0.0.3 [1][2].

[1] http://lowbyte.de/vga-sync-fields/vga-sync-fields-0.0.3.tgz
[2] http://git.hellersdorfer-jugendchor.de/?p=3Dvga2scart.git;a=3Dcommit;h=
=3Dc5c8ed6c51fc9879dbf38d8b91d5db6f4300ea03
Signed-off-by: NThomas Hilber <sparkie@lowbyte.de>
Signed-off-by: NPaul Menzel <paulepanter@users.sourceforge.net>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now we have __initconst, we can finally move the external declarations for
the various Linux logo structures to <linux/linux_logo.h>.

James' ack dates back to the previous submission (way to long ago), when the
logos were still __initdata, which caused failures on some platforms with some
toolchain versions.
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: NJames Simmons <jsimmons@infradead.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The generated logo sources are not automatically regenerated if
scripts/pnmtologo.c has changed. Add the missing dependency to fix this.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Tested-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The LIS302DL accelerometer chip has a 'click' feature which can be used to
detect sudden motion on any of the three axis.  Configuration data is
passed via spi platform_data and no action is taken if that's not
specified, so it won't harm any existing platform.

To make the configuration effective, the IRQ lines need to be set up
appropriately.  This patch also adds a way to do that from board support
code.

The DD_* definitions were factored out to an own enum because they are
specific to LIS3LV02D devices.
Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Acked-by: NPavel Machek <pavel@ucw.cz>
Acked-by: NEric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Separate the 6710 and 6715, and set the right axis information for the
6715.
Reported-by: NIsaac702 <isaac702@gmail.com>

Add the 6930.
Reported-by: NChristian Weidle <slateroni@gmail.com>

Add the 2710.
Reported-by: NPavel Herrmann <morpheus.ibis@gmail.com>
Signed-off-by: NEric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now that there is no need to hookup on the open/close of the joystick,
it's possible to use the simplified interface input_polled_device, instead
of creating our own kthread.

[randy.dunlap@oracle.com: fix Kconfig]
[randy.dunlap@oracle.com: fix Kconfig some more]
Signed-off-by: NEric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After measurement on my laptop, it seems that turning off the device does
not bring any energy saving (within 0.1W precision).  So let's keep the
device always on.  It simplifies the code, and it avoids the problem of
reading a wrong value sometimes just after turning the device on.

Moreover, since commit ef2cfc79 had been
too zealous, the device was actually never turned off anyway.  This patch
also restores the damages done by this commit concerning the
initialisation/poweroff.

Also do more clean up with the usage of the lis3_dev global variable.
Signed-off-by: NEric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Can only unregister the misc device if it was registered before.  Also
remove debugging messages, which in addition were not properly formated.
Signed-off-by: NEric Piel <eric.piel@tremplin-utc.net>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Furthermore, notice that the initial checks:

	if (!node->rb_left)
		child = node->rb_right;
	else if (!node->rb_right)
		child = node->rb_left;
	else
	{
		...
	}
guarantee that old->rb_right is set in the final else branch, therefore
we can omit checking that again.
Signed-off-by: NWolfram Strepp <wstrepp@gmx.de>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are two cases when a node, having 2 childs, is erased:
'normal case': the successor is not the right-hand-child of the node to be erased
'special case': the successor is the right-hand child of the node to be erased

Here some ascii-art, with following symbols (referring to the code):
O: node to be deleted
N: the successor of O
P: parent of N
C: child of N
L: some other node

normal case:

               O                         N
              / \                       / \
             /   \                     /   \
            L     \                   L     \
           / \     P      ---->      / \     P
                  / \                       / \
                 /                         /
                N                         C
                 \                       / \
                  \
                   C
                  / \

special case:
              O|P                        N
              / \                       / \
             /   \                     /   \
            L     \                   L     \
           / \     N      ---->      /       C
                    \                       / \
                     \
                      C
                     / \

Notice that for the special case we don't have to reconnect C to N.
Signed-off-by: NWolfram Strepp <wstrepp@gmx.de>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>