Bringup tavorevb3 development platform. UART and PMIC are enabled.
Signed-off-by: NHaojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

Signed-off-by: NHaojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: NAntonio Ospite <ospite@studenti.unina.it>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

USB2.0 Device Controller (U2DC) which is found in Marvell PXA3xx.
U2DC supports both High and Full speed modes.
PXA320 and PXA300 U2DC supports only UTMI interface.
PXA310 U2DC supports only ULPI interface and has the OTG capability.

U2D Controller ULPI driver introduced in this patch supports only the
PXA310 USB Host via the ULPI.
Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NMike Rapoport <mike@compulab.co.il>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>

This contains common code for Palm LD, TX, T5, Z72, Treo680, Centro
This code also adds PMIC support for all the devices,
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>

CORGI_SSP_DEPRECATED doesn't exist in Kconfig, therefore removing all
references for it from the source code.
Signed-off-by: NChristoph Egger <siccegge@cs.fau.de>
Acked-by: NKristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

With kexec-based kernel boot loader on Zaurus, the machine ID is
actually correctly passed, and head-sharpsl.S is not necessary.
Introduce PXA_SHARPSL_DETECT_MACH_ID, and include head-sharpsl.S
only when that's explicitly enabled.
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

1. TOSA related un-hidden options moved to right under MACH_TOSA
2. SHARPSL_PM related hidden options moved to the end of Kconfig
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

This is support for custom design based on Toradex Colibri PXA270 CPU card.
Initial patch was by Pavel Revak.

[daniel - rebased the code to follow the module/board split]
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
Cc: Pavel Revak <palo@bielyvlk.sk>
Cc: Daniel Mack <daniel@caiaq.de>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

Follow the idea of several MX31 based boards and split code that is
related to the module from code that is baseboard specific. This makes
adding new base board support easier, while avoiding code duplication.
Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Acked-by: NMarek Vasut <marek.vasut@gmail.com>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

This patch adds support for the on-board IDE channel. I tested this with a CDROM
connected over 2.5-3.5 IDE reduction with external power supplied to the CDROM.
This was not tested with the Voipac 270-HDD-000 (official Voipac HDD module),
but I expect no problems.
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

This patch adds basic support for the Voipac PXA270 SBC.
The device consists of the following hardware:
- PXA270 @ 520 MHz
- 256MB RAM (sparsemem, 2*128MB regions)
- 64MB NOR flash
- 640x480 LCD
- Ports: 2xUHC, 1xUDC, 1xPCMCIA, VGA, FFUART, 2xPS2, Speaker, MIC
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

This patch adds support for the Zipit Z2. The parts missing from this
patch are the battery support, SPI driver for the LCD and support for
the Silicon Serial ID chip.
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

Tosa is now able to use generic matrix keypad driver instead of the deprecated
tosakbd.c, where CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES is still useful.  Move
it to mach/Kconfig.
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

PXA_SSP is actually used by drivers like drivers/spi/pxa2xx_spi.c and
sound/soc/pxa/pxa-ssp.c, not by boards. Remove those incorrect 'select'
from Kconfig and make SOC_PXA_SSP to select.
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

Signed-off-by: NHaojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

The only use of corgi_ssp.c is corgi_ts.c, which is now deprecated
and removed. Remove corgi_ssp.c and corgi_lcd.c and their relevant
function declarations and data structures.
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Pavel Machek <pavel@ucw.cz>

sharpsl_pm.c actually depends on max1111 driver being built-in when
not using legacy ssp code.
Reported-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

Reported-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

Signed-off-by: NEdwin Peer <epeer@tmtservices.co.za>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

IRQ_LOCOMO_* are never used elsewhere, remove these definitions. As well
as the cascade of these IRQs. IRQ_LOCOMO_*_BASE changed to IRQ_LOCOMO_*.

IRQ_LOCOMO_LT and IRQ_LOCOMO_SPI are likely to be used in a same way as
IRQ_LOCOMO_KEY.

IRQ_LOCOMO_GPIO and the demultiplex handler should really be living
somewhere else.
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

This has to be selected, otherwise some peripherals don't get initialized.
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

This adds support for Raumfeld's 'Controller', 'Connector', 'Speaker S'
and 'Speaker M' devices. They're all based on PXA303 SoCs.
Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NMike Rapoport <mike@compulab.co.il>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

Commit db205463 was incorrectly applied,
and reverted here to re-apply.
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

The Arcom Zeus CF slot requires the same kind of support as the Viper.
To avoid code duplication, introduce a platform device that abstracts
the differences.

This also allows for the removal of the ugly export of viper_cf_rst().
Signed-off-by: NMarc Zyngier <maz@misterjones.org>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

Signed-off-by: NMarc Zyngier <maz@misterjones.org>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NMike Rapoport <mike@compulab.co.il>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

CONFIG_CPU_PXA{300,310,320,930,935,950} are really platform dependent
and should be made into selectable hidden options.
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

MACH_COLIBRI300 is supposed to support both PXA300 and PXA310, select
the missing CPU_PXA310.
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
Acked-by: NDaniel Mack <daniel@caiaq.de>

Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted
in the following order:

 1. By category:
    Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed
    by end-user products (this is to ensure the commonly referenced platforms
    will appear first)

 2. By vendor name in alphabetic within each category
    (this is to ensure code reuse and similar platforms can be grouped as
     much as possible)

	   VENDOR        BOARD
	Intel/Marvell   Lubbock
	Intel/Marvell   Mainstone
	Intel/Marvell   Zylonite
	Intel/Marvell   Littleton
	Intel/Marvell   TavorEVB
	Intel/Marvell   SAAR

	Accelent        IDP
	Arcom/Eurotech  VIPER
	Community       Balloon3
	Cogent          CSB726
	CompuLab        EM_X270
	CompuLab        EXEDA
	CompuLab        ARMCORE
	CompuLab        CM_X300
	Gumstix         Gumstix
	Intel Research  MOTE2
	Intel research  Stargate2
	Iskratel        XCEP
	Keith and Koep  Trizeps4
	LogicPD         LPD270
	Phytec          PCM027
	Toradex         Colibri

	HP              HX4700
	HP              H5000
	HTC             Himalaya
	HTC             Magician
	Mitac           MioA701
	Motorola        EZX
	NEC             MP900C
	Palm            Palm PDA
	Palm            Palm GSM
	Sharp           Zaurus
	Toshiba         E-Series
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

Signed-off-by: NTomáš Čech <sleep_walker@suse.cz>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

Signed-off-by: NTomáš Čech <sleep_walker@suse.cz>
Acked-by: NMarek Vasut <marek.vasut@gmail.com>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

So, again against latest pxa-linux-2.6/devel, with the following
changes:

 * Move to __raw_readl/__raw_writel for FPGA/CPLD register access
 * Change Toppoly LCD config to be selectable at run time rather than
   compile time.
 * Remove currently unused irq device suspend/resume functions.
 * Strip out unnecessary/duplicated #includes.
 * Some code style cleanups.

Balloon3 (http://balloonboard.org/) base machine support
Signed-off-by: NJonathan McDowell <noodles@earth.li>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

Added support for the Iskratel XCEP single board computer, embedded in
instruments used in particle accelerators.

The patch contains the platform specific code, Makefile and Kconfig
changes for platform arm-pxa.
Signed-off-by: NAleš Bardorfer <ales.bardorfer@i-tech.si>
Signed-off-by: NMichael Abbott <michael.abbott@diamond.ac.uk>
Signed-off-by: NMatej Kenda <matej.kenda@i-tech.si>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

This patch adds basic support for Palm Tungsten|C handheld.
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

Signed-off-by: NDaniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>