When post wr for mixed rdma operation, we need to use fence
mechanism to keep the correct execute order.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NShaobo Xu <xushaobo2@huawei.com>
Signed-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The TRRL(Target RDMA Read/aTOMIC List) record the information
of receiving RDMA READ or ATOMIC operation in hip08. It will
be used the hardware. The driver need to assign a continuous
physical address for trrl_ba field of qp context.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NShaobo Xu <xushaobo2@huawei.com>
Signed-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The irrl(initiator RDMA Read/Atomic list) base address of qp
context is assigned for addr[63:6]. This patch mainly fixed
it.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NShaobo Xu <xushaobo2@huawei.com>
Signed-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The hardware vendors need to generate RoCEv1 or RoCEv2
packet according to the sgid type configured.

Besides, update the gid table size for hip08 RoCE
device.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NShaobo Xu <xushaobo2@huawei.com>
Signed-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

HNS_ROCE_CAP_FALG_ROCE_V1_V2 is added for selecting capability of
RoCE in hns driver. When HNS_ROCE_CAP_FALG_ROCE_V1_V2 is set,
driver will inform ib core that the related hns device can support
RoCEv2, and ib core can generate the gid of the related type.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NShaobo Xu <xushaobo2@huawei.com>
Signed-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch adds rereg mr support for hip08.
Signed-off-by: NShaobo Xu <xushaobo2@huawei.com>
Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Pick up the missing netlink oops fix
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The code that allocates the tx ring in the sdma code fails to take
advantage of kvzalloc variations.

Fix by converting to use kvzalloc_node.
Reported-by: NLeon Romanovsky <leon@kernel.org>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The driver parameter num_user_contexts controls global behavior and
should not be modified by the driver.
This patch eliminates modification of num_user_contexts by using a
local variable to keep track of the value.
Reviewed-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NKamenee Arumugam <kamenee.arumugam@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The only use for the urg interrupt is for priority PSM packets.

There is no reason for this interrupt to be enabled for kernel
contexts.
Reviewed-by: NKaike Wan <kaike.wan@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch adds tx_opcode_stats to parallel the
(rx)opcode_stats in the debugfs.
Reviewed-by: NKaike Wan <kaike.wan@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

These are the use-cases where the pkey needs to be tested to see
if a packet needs to be dropped.

a) Check if pkey is not FULL_MGMT_P_KEY or LIM_MGMT_P_KEY,
   drop the packet as it's not part of the management partition.
   Self-originated packets are an exception.

b) If pkey index points to FULL_MGMT_P_KEY and LIM_MGMT_P_KEY is
   in the table, the packet is coming from a management node,
   and the receiving node is also a management node, so it is safe
   for the packet to go through.

c) If pkey index points to FULL_MGMT_P_KEY and LIM_MGMT_P_KEY is
   NOT in the table, drop the packet as LIM_MGMT_P_KEY should
   always be in the pkey table. It could be a misconfiguration.

d) If pkey index points to LIM_MGMT_P_KEY and FULL_MGMT_P_KEY is
   NOT in the table, it is safe for the packet to go through
   since a non-management node is talking to another non-managment
   node.

e) If pkey index points to LIM_MGMT_P_KEY and FULL_MGMT_P_KEY is in
   the table, drop the packet because a non-management node is
   talking to a management node, and it could be an attack.

For the implementation, these rules can be simplied to only checking
for (a) and (e). There's no need to check for rule (b) as
the packet doesn't need to be dropped. Rule (c) is not possible in
the driver as LIM_MGMT_P_KEY is always in the pkey table.
Reviewed-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

__subn_get_opa_portinfo stores value returned by hfi1_get_ib_cfg() as
operational vls. hfi1_get_ib_cfg() returns vls_operational field in
hfi1_pportdata. The problem with this is that the value is always equal
to vls_supported field in hfi1_pportdata.

The logic to calculate operational_vls is to set value passed by FM
(in  __subn_set_opa_portinfo routine). If no value is passed then
default value is stored in operational_vls.

Field actual_vls_operational is calculated on the basis of buffer
control table. Hence, modifying hfi1_get_ib_cfg() to return
actual_operational_vls when used with HFI1_IB_CFG_OP_VLS parameter
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NPatel Jay P <jay.p.patel@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The handler for link init state (HLS_UP_INIT) notifies userspace
(update_statusp()) before enabling the device
(RCV_CTRL_RCV_PORT_ENABLE_SMASK) or setting the device state
(ppd->host_link_state).  This causes a race condition where the
userspace thinks the interface is in the INIT state before the driver
has set that state.

Rework the code path to eliminate the race.

Delay setting the init state until after a HW settling period.
Reviewed-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When host is shutting down, it invokes the shutdown hook of the
L2 driver where it would attempt to free the MSI-X vectors, but would fail
because some vectors are held by the RoCE driver.
Implement the new hook in the L2 -> RoCE interface which will be invoked so that
the RoCE driver can unregister the device and free up the MSI-X vectors it had
claimed so that L2 can proceed with it's shutdown without failure.
Signed-off-by: NSomnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The scqe.stag is actually __b32, fix it.

  drivers/infiniband/hw/cxgb4/cq.c:754:52: warning: cast to restricted __be32

Cc: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Moni Shoua <monis@mellanox.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

rdma_nl_rcv_msg() checks to see if it should use the .dump() callback
or the .doit() callback.  The check is done with this check:

if (flags & NLM_F_DUMP) ...

The NLM_F_DUMP flag is two bits (NLM_F_ROOT | NLM_F_MATCH).

When an RDMA_NL_LS message (response) is received, the bit used for
indicating an error is the same bit as NLM_F_ROOT.

NLM_F_ROOT == (0x100) == RDMA_NL_LS_F_ERR.

ibacm sends a response with the RDMA_NL_LS_F_ERR bit set if an error
occurs in the service.  The current code then misinterprets the
NLM_F_DUMP bit and trys to call the .dump() callback.

If the .dump() callback for the specified request is not available
(which is true for the RDMA_NL_LS messages) the following Oops occurs:

[ 4555.960256] BUG: unable to handle kernel NULL pointer dereference at
   (null)
[ 4555.969046] IP:           (null)
[ 4555.972664] PGD 10543f1067 P4D 10543f1067 PUD 1033f93067 PMD 0
[ 4555.979287] Oops: 0010 [#1] SMP
[ 4555.982809] Modules linked in: rpcrdma ib_isert iscsi_target_mod
target_core_mod ib_iser libiscsi scsi_transport_iscsi ib_ipoib rdma_ucm ib_ucm
ib_uverbs ib_umad rdma_cm ib_cm iw_cm dm_mirror dm_region_hash dm_log dm_mod
dax sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm irqbypass
crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel crypto_simd
glue_helper cryptd hfi1 rdmavt iTCO_wdt iTCO_vendor_support ib_core mei_me
lpc_ich pcspkr mei ioatdma sg shpchp i2c_i801 mfd_core wmi ipmi_si ipmi_devintf
ipmi_msghandler acpi_power_meter acpi_pad nfsd auth_rpcgss nfs_acl lockd grace
sunrpc ip_tables ext4 mbcache jbd2 sd_mod mgag200 drm_kms_helper syscopyarea
sysfillrect sysimgblt fb_sys_fops ttm igb ahci crc32c_intel ptp libahci
pps_core drm dca libata i2c_algo_bit i2c_core
[ 4556.061190] CPU: 54 PID: 9841 Comm: ibacm Tainted: G          I
4.14.0-rc2+ #6
[ 4556.069667] Hardware name: Intel Corporation S2600WT2/S2600WT2, BIOS
SE5C610.86B.01.01.0008.021120151325 02/11/2015
[ 4556.081339] task: ffff880855f42d00 task.stack: ffffc900246b4000
[ 4556.087967] RIP: 0010:          (null)
[ 4556.092166] RSP: 0018:ffffc900246b7bc8 EFLAGS: 00010246
[ 4556.098018] RAX: ffffffff81dbe9e0 RBX: ffff881058bb1000 RCX:
0000000000000000
[ 4556.105997] RDX: 0000000000001100 RSI: ffff881058bb1320 RDI:
ffff881056362000
[ 4556.113984] RBP: ffffc900246b7bf8 R08: 0000000000000ec0 R09:
0000000000001100
[ 4556.121971] R10: ffff8810573a5000 R11: 0000000000000000 R12:
ffff881056362000
[ 4556.129957] R13: 0000000000000ec0 R14: ffff881058bb1320 R15:
0000000000000ec0
[ 4556.137945] FS:  00007fe0ba5a38c0(0000) GS:ffff88105f080000(0000)
knlGS:0000000000000000
[ 4556.147000] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4556.153433] CR2: 0000000000000000 CR3: 0000001056f5d003 CR4:
00000000001606e0
[ 4556.161419] Call Trace:
[ 4556.164167]  ? netlink_dump+0x12c/0x290
[ 4556.168468]  __netlink_dump_start+0x186/0x1f0
[ 4556.173357]  rdma_nl_rcv_msg+0x193/0x1b0 [ib_core]
[ 4556.178724]  rdma_nl_rcv+0xdc/0x130 [ib_core]
[ 4556.183604]  netlink_unicast+0x181/0x240
[ 4556.187998]  netlink_sendmsg+0x2c2/0x3b0
[ 4556.192392]  sock_sendmsg+0x38/0x50
[ 4556.196299]  SYSC_sendto+0x102/0x190
[ 4556.200308]  ? __audit_syscall_entry+0xaf/0x100
[ 4556.205387]  ? syscall_trace_enter+0x1d0/0x2b0
[ 4556.210366]  ? __audit_syscall_exit+0x209/0x290
[ 4556.215442]  SyS_sendto+0xe/0x10
[ 4556.219060]  do_syscall_64+0x67/0x1b0
[ 4556.223165]  entry_SYSCALL64_slow_path+0x25/0x25
[ 4556.228328] RIP: 0033:0x7fe0b9db2a63
[ 4556.232333] RSP: 002b:00007ffc55edc260 EFLAGS: 00000293 ORIG_RAX:
000000000000002c
[ 4556.240808] RAX: ffffffffffffffda RBX: 0000000000000010 RCX:
00007fe0b9db2a63
[ 4556.248796] RDX: 0000000000000010 RSI: 00007ffc55edc280 RDI:
000000000000000d
[ 4556.256782] RBP: 00007ffc55edc670 R08: 00007ffc55edc270 R09:
000000000000000c
[ 4556.265321] R10: 0000000000000000 R11: 0000000000000293 R12:
00007ffc55edc280
[ 4556.273846] R13: 000000000260b400 R14: 000000000000000d R15:
0000000000000001
[ 4556.282368] Code:  Bad RIP value.
[ 4556.286629] RIP:           (null) RSP: ffffc900246b7bc8
[ 4556.293013] CR2: 0000000000000000
[ 4556.297292] ---[ end trace 8d67abcfd10ec209 ]---
[ 4556.305465] Kernel panic - not syncing: Fatal exception
[ 4556.313786] Kernel Offset: disabled
[ 4556.321563] ---[ end Kernel panic - not syncing: Fatal exception
[ 4556.328960] ------------[ cut here ]------------

Special case RDMA_NL_LS response messages to call the appropriate
callback.

Additionally, make sure that the .dump() callback is not NULL
before calling it.

Fixes: 647c75ac ("RDMA/netlink: Convert LS to doit callback")
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: NKaike Wan <kaike.wan@intel.com>
Reviewed-by: NAlex Estrin <alex.estrin@intel.com>
Signed-off-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In recent code, two path record entries are alwasy cleared while
allocated could be either one or two path record entries.
This leads to zero out of unallocated memory.

This fix initializes alternative path record only when alternative path
is set.

While we are at it, path record allocation doesn't check for OPA
alternative path, but rest of the code checks for OPA alternative path.
Path record allocation code doesn't check for OPA alternative LID.
This can further lead to memory corruption when only one path record is
allocated, but there is actually alternative OPA path record present in CM
request.

Cc: <stable@vger.kernel.org> # v4.12+
Fixes: 9fdca4da ("IB/SA: Split struct sa_path_rec based on IB and ROCE specific fields")
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Some user space application would like to do RSS on the inner
packet fields instead on the outer.
When MLX5_RX_HASH_INNER is set with one or more of the other
hash fields, then the RSS will be done using the inner packet.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The device can support receive Stateless Offloads for the inner
packet's fields only when the packet is processed by TIR which is
enabled to support tunneling. Otherwise, the device treats the
packet as an ordinary non-tunneling packet and receive offloads
can be done only for the outer packet's field.
In order to enable receive Stateless Offloading support for incoming
tunneling traffic the TIR should be created with tunneled_offload_en.
Tunneling offloads is supported only be raw ethernet QP.

This patch includes:
* New QP creation flag for tunneling offloads.
* Reports device capabilities.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch updates the mlx5_ifc with the following:
- Fix tunnel_stateless_gre typo.
- max_geneve_opt_len - Maximum geneve options length.
- tunnel_stateless_geneve_rx - If set, receive Stateless
  Offloads for Geneve tunneled (inner) packets are supported.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In some benchmarks and some CPU architectures, writing the CQE on a full
cache line size improves performance by saving memory access operations
(read-modify-write) relative to partial cache line change. This patch
lets the user to configure the device to pad the CQE up to 128B in case
its content is less than 128B. Currently the driver supports only padding
for a CQE size of 128B.
Signed-off-by: NGuy Levi <guyle@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In commit 1cbe6fc8 ("IB/mlx5: Add support for CQE compressing") the
concept of CQE compression was introduced and added a support for 64B
CQE size. This change update the code to support 128B CQE size as well.
Signed-off-by: NGuy Levi <guyle@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Adding new bits in mlx5_ifc_cmd_hca_cap to get the hardware capabilities
for:
 - compression_128: Support 128B CQE compression
 - cqe_128_always: Support 128B CQE padding
Signed-off-by: NGuy Levi <guyle@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Allow creation of a multi-packet receive queue.

In order to create a multi-packet RQ, the following fields in
the mlx5_ib_rwq should be set:
- log_num_strides: Log of number of strides per WQE
- single_stride_log_num_of_bytes: Log of a single stride size
- two_byte_shift_en: When enabled, hardware pads 2 bytes of zeros
  before writing the message to memory (e.g. for the IP alignment).
Signed-off-by: NNoa Osherovich <noaos@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch reports the device's striding RQ capabilities to
the user-space:
- min/max_single_stride_log_num_of_bytes: Log of min/max number of
  bytes in a single stride.
- min/max_single_wqe_log_num_of_strides: Log of min/max number of
  strides in a single WQE.
- supported_qpts: A bit mask to know which QP types support multi-
  packet RQ, for now only Raw Packet QPs.
Signed-off-by: NNoa Osherovich <noaos@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

It is needed to call modify cq API for modifying cq
context fields for controlling event generation
moderations. This patch mainly adds it.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch updates the PD specification to 16M for hip08. And it
updates the numbers of mtt and cqe segments for the buddy.

As the CQE supports hop num 1 addressing, the CQE specification is
64k. This patch updates to set the CQE specification to 64k.
Signed-off-by: NShaobo Xu <xushaobo2@huawei.com>
Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

As the increase of the IRRL specification in hip08, the IRRL table
chunk size needs to be updated.
This patch updates the IRRL table chunk size to 256k for hip08.
Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NShaobo Xu <xushaobo2@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch updates to support WQE, CQE and PBL page size configurable
feature, which includes base address page size and buffer page size.
Signed-off-by: NShaobo Xu <xushaobo2@huawei.com>
Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

NAPI budget is 64 packets, while maximum polling size for
the send CQ is 16. Let's bring them in sync, so the NAPI
budget will be reused completely.

Cc: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: NErez Shitrit <erezsh@mellanox.com>
Reviewed-by: NAlex Vesker <valex@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Instead of explicit call to poll_cq of the tx ring, use the NAPI mechanism
to handle the completions of each packet that has been sent to the HW.

The next major changes were taken:
 * The driver init completion function in the creation of the send CQ,
   that function triggers the napi scheduling.
 * The driver uses CQ for RX for both modes UD and CM, and CQ for TX
   for CM and UD.

Cc: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: NErez Shitrit <erezsh@mellanox.com>
Reviewed-by: NAlex Vesker <valex@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The first step toward using NAPI in the UD/TX flow is to separate
between two flows, the NAPI and the xmit, meaning no use of shared
variables between both flows.

This patch takes out the tx_outstanding variable that was used in both
flows and instead the driver uses the 2 cyclic ring variables: tx_head
and tx_tail, tx_head used in the xmit flow and tx_tail in the NAPI flow.

Cc: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: NErez Shitrit <erezsh@mellanox.com>
Reviewed-by: NAlex Vesker <valex@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

RDMA subsystem has one active maintainer who can apply
patches - Doug Ledford, but the RDMA entries in MAINTAINER file
are not stating it. The following patch removes Sean's and Hal's
emails from the maintainers list.

It will allow clean get_maintaner.pl output which is needed for people
outside of our community and various semi-automatic tools.

Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Acked-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Control QP (CQP) command backlog list is initialized at
device initialization time.  It is not reinitialized in
the reset flow.  Move the initialization to CQP creation
time so the list can be initialized correctly for reset as well.

Fixes: 86dbcd0f ("i40iw: add file to handle cqp calls")
Signed-off-by: NBob Sharp <Robert.O.Sharp@intel.com>
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

If User-space Direct Access (UDA) QP creation fails,
the QP entry is not removed from QoS list. Fix this
by removing QP from QoS list if create QP fails.

Fixes: 0fc2dc58 ("i40iw: Add Quality of Service support")
Signed-off-by: NIvan Barrera <ivan.d.barrera@intel.com>
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Clear Control Queue Pair (CQP) Head/Tail on CQP
initialization as during an adapter reset, these
values are not reinitialized. Tail is cleared by
writing 0 to CQP's tail register. Head is cleared
by writing 0 to CQP's doorbell register.

Fixes: 86dbcd0f ("i40iw: add file to handle cqp calls")
Signed-off-by: NChristopher Bednarz <christopher.n.bednarz@intel.com>
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Queue depth calculations use a mix of work requests
and actual number of bytes. Consolidate all calculations
using minimum WQE size to avoid confusion.
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

On a netdev MTU change event, the iWARP
Exception Queue (IEQ) buffers may not be
sized properly to handle the new MTU.

Reinitialize the IEQ with new MTU size on MTU
change event.

Also, add define for the max ethernet frame size
field in IEQ QP context instead of the snd_mss
define which is for iWARP QPs' MSS field.
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>