Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 20 7月, 2012 2 次提交
    • M
      dm thin: do not send discards to shared blocks · 650d2a06
      由 Mikulas Patocka 提交于 
      When process_discard receives a partial discard that doesn't cover a
full block, it sends this discard down to that block. Unfortunately, the
block can be shared and the discard would corrupt the other snapshots
sharing this block.

This patch detects block sharing and ends the discard with success when
sending it to the shared block.

The above change means that if the device supports discard it can't be
guaranteed that a discard request zeroes data. Therefore, we set
ti->discard_zeroes_data_unsupported.

Thin target discard support with this bug arrived in commit
104655fd (dm thin: support discards).
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Cc: stable@kernel.org
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      650d2a06
    • M
      dm raid1: fix crash with mirror recovery and discard · 751f188d
      由 Mikulas Patocka 提交于 
      This patch fixes a crash when a discard request is sent during mirror
recovery.

Firstly, some background.  Generally, the following sequence happens during
mirror synchronization:
- function do_recovery is called
- do_recovery calls dm_rh_recovery_prepare
- dm_rh_recovery_prepare uses a semaphore to limit the number
  simultaneously recovered regions (by default the semaphore value is 1,
  so only one region at a time is recovered)
- dm_rh_recovery_prepare calls __rh_recovery_prepare,
  __rh_recovery_prepare asks the log driver for the next region to
  recover. Then, it sets the region state to DM_RH_RECOVERING. If there
  are no pending I/Os on this region, the region is added to
  quiesced_regions list. If there are pending I/Os, the region is not
  added to any list. It is added to the quiesced_regions list later (by
  dm_rh_dec function) when all I/Os finish.
- when the region is on quiesced_regions list, there are no I/Os in
  flight on this region. The region is popped from the list in
  dm_rh_recovery_start function. Then, a kcopyd job is started in the
  recover function.
- when the kcopyd job finishes, recovery_complete is called. It calls
  dm_rh_recovery_end. dm_rh_recovery_end adds the region to
  recovered_regions or failed_recovered_regions list (depending on
  whether the copy operation was successful or not).

The above mechanism assumes that if the region is in DM_RH_RECOVERING
state, no new I/Os are started on this region. When I/O is started,
dm_rh_inc_pending is called, which increases reg->pending count. When
I/O is finished, dm_rh_dec is called. It decreases reg->pending count.
If the count is zero and the region was in DM_RH_RECOVERING state,
dm_rh_dec adds it to the quiesced_regions list.

Consequently, if we call dm_rh_inc_pending/dm_rh_dec while the region is
in DM_RH_RECOVERING state, it could be added to quiesced_regions list
multiple times or it could be added to this list when kcopyd is copying
data (it is assumed that the region is not on any list while kcopyd does
its jobs). This results in memory corruption and crash.

There already exist bypasses for REQ_FLUSH requests: REQ_FLUSH requests
do not belong to any region, so they are always added to the sync list
in do_writes. dm_rh_inc_pending does not increase count for REQ_FLUSH
requests. In mirror_end_io, dm_rh_dec is never called for REQ_FLUSH
requests. These bypasses avoid the crash possibility described above.

These bypasses were improperly implemented for REQ_DISCARD when
the mirror target gained discard support in commit
5fc2ffea (dm raid1: support discard).

In do_writes, REQ_DISCARD requests is always added to the sync queue and
immediately dispatched (even if the region is in DM_RH_RECOVERING).  However,
dm_rh_inc and dm_rh_dec is called for REQ_DISCARD resusts.  So it violates the
rule that no I/Os are started on DM_RH_RECOVERING regions, and causes the list
corruption described above.

This patch changes it so that REQ_DISCARD requests follow the same path
as REQ_FLUSH. This avoids the crash.

Reference: https://bugzilla.redhat.com/837607Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Cc: stable@kernel.org
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      751f188d
  3. 15 7月, 2012 8 次提交
  5. 14 7月, 2012 14 次提交
  7. 13 7月, 2012 10 次提交
  9. 12 7月, 2012 6 次提交
    • M
      ARM: EXYNOS: register devices in 'need_restore' state for pm_domains · ebc35c72
      由 Marek Szyprowski 提交于 
      Commit ca1d72f0 ('PM / Domains: Make it possible to add devices to
inactive domains') introduced possibility to add devices to inactive
power domains and added pm_genpd_dev_need_restore() function which lets
platform core to notify power domain core that the specified device must
be restored (with its runtime_resume() callback) before first use.

This patch adds the pm_genpd_dev_need_restore() call what brings back
the suspend/resume behaviour for the client devices known from the
previous power domain driver (removed by commit 91cfbd4e - 'ARM:
EXYNOS: Hook up power domains to generic power domain infrastructure').
Client device drivers relay on that suspend/resume behaviour, thus this
patch fixes runtime pm operation for client devices.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
      ebc35c72
    • M
      ARM: EXYNOS: read initial state of power domain from hw registers · 76eb5567
      由 Marek Szyprowski 提交于 
      Some bootloaders disable unused power domains to reduce power
consuption. Power domain driver can easily read the actual state from
the hardware registers instead of assuming that their initial state is
always 'on'.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
      76eb5567
    • C
      SH: Convert out[bwl] macros to inline functions · 44033109
      由 Corey Minyard 提交于 
      The macros just called BUG(), but that results in unused variable
warnings all over the place, like in the IPMI driver.  The build
regression emails were annoying me, so here's the fix.  I have
not even compile tested this, but it's rather obvious.

[ port type mangled to unsigned long ]
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
      44033109
    • L
      Merge tag 'fbdev-fixes-for-3.5-2' of git://github.com/schandinat/linux-2.6 · 918227bb
      由 Linus Torvalds 提交于 
      Pull fbdev fixes from Florian Tobias Schandinat:
 "Two fixes for OMAPDSS by Tomi Valkeinen:
   - one to avoid warnings when runtime PM is not enabled
   - one workaround to dependancy issues during suspend/resume"

* tag 'fbdev-fixes-for-3.5-2' of git://github.com/schandinat/linux-2.6:
  OMAPDSS: fix warnings if CONFIG_PM_RUNTIME=n
  OMAPDSS: Use PM notifiers for system suspend
      918227bb
    • L
      Merge branch 'akpm' (Andrew's patch-bomb) · 00c3e276
      由 Linus Torvalds 提交于 
      Merge random patches from Andrew Morton.

* Merge emailed patches from Andrew Morton <akpm@linux-foundation.org>: (32 commits)
  memblock: free allocated memblock_reserved_regions later
  mm: sparse: fix usemap allocation above node descriptor section
  mm: sparse: fix section usemap placement calculation
  xtensa: fix incorrect memset
  shmem: cleanup shmem_add_to_page_cache
  shmem: fix negative rss in memcg memory.stat
  tmpfs: revert SEEK_DATA and SEEK_HOLE
  drivers/rtc/rtc-twl.c: fix threaded IRQ to use IRQF_ONESHOT
  fat: fix non-atomic NFS i_pos read
  MAINTAINERS: add OMAP CPUfreq driver to OMAP Power Management section
  sgi-xp: nested calls to spin_lock_irqsave()
  fs: ramfs: file-nommu: add SetPageUptodate()
  drivers/rtc/rtc-mxc.c: fix irq enabled interrupts warning
  mm/memory_hotplug.c: release memory resources if hotadd_new_pgdat() fails
  h8300/uaccess: add mising __clear_user()
  h8300/uaccess: remove assignment to __gu_val in unhandled case of get_user()
  h8300/time: add missing #include <asm/irq_regs.h>
  h8300/signal: fix typo "statis"
  h8300/pgtable: add missing #include <asm-generic/pgtable.h>
  drivers/rtc/rtc-ab8500.c: ensure correct probing of the AB8500 RTC when Device Tree is enabled
  ...
      00c3e276
    • Y
      memblock: free allocated memblock_reserved_regions later · 29f67386
      由 Yinghai Lu 提交于 
      memblock_free_reserved_regions() calls memblock_free(), but
memblock_free() would double reserved.regions too, so we could free the
old range for reserved.regions.

Also tj said there is another bug which could be related to this.

| I don't think we're saving any noticeable
| amount by doing this "free - give it to page allocator - reserve
| again" dancing.  We should just allocate regions aligned to page
| boundaries and free them later when memblock is no longer in use.

in that case, when DEBUG_PAGEALLOC, will get panic:

     memblock_free: [0x0000102febc080-0x0000102febf080] memblock_free_reserved_regions+0x37/0x39
  BUG: unable to handle kernel paging request at ffff88102febd948
  IP: [<ffffffff836a5774>] __next_free_mem_range+0x9b/0x155
  PGD 4826063 PUD cf67a067 PMD cf7fa067 PTE 800000102febd160
  Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
  CPU 0
  Pid: 0, comm: swapper Not tainted 3.5.0-rc2-next-20120614-sasha #447
  RIP: 0010:[<ffffffff836a5774>]  [<ffffffff836a5774>] __next_free_mem_range+0x9b/0x155

See the discussion at https://lkml.org/lkml/2012/6/13/469

So try to allocate with PAGE_SIZE alignment and free it later.
Reported-by: NSasha Levin <levinsasha928@gmail.com>
Acked-by: NTejun Heo <tj@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      29f67386