This reverts commit 941f5f0f.

Sadly, it turns out that we really can't just do the cross-CPU IPI to
all CPU's to get their proper frequencies, because it's much too
expensive on systems with lots of cores.

So we'll have to revert this for now, and revisit it using a smarter
model (probably doing one system-wide IPI at open time, and doing all
the frequency calculations in parallel).
Reported-by: NWANG Chao <chao.wang@ucloud.cn>
Reported-by: NIngo Molnar <mingo@kernel.org>
Cc: Rafael J Wysocki <rafael.j.wysocki@intel.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit:

  9a93848f ("x86/debug: Implement __WARN() using UD0")

turned warnings into UD0, but the fixup code only runs after the
notify_die() chain. This is a problem, in particular, with kgdb,
which kicks in as if it was a BUG().

Fix this by running the fixup code before the notifier chain in
the invalid op handler path.
Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Tested-by: NIlya Dryomov <idryomov@gmail.com>
Acked-by: NDaniel Thompson <daniel.thompson@linaro.org>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Weinberger <richard.weinberger@gmail.com>
Cc: <stable@vger.kernel.org> # v4.12+
Link: http://lkml.kernel.org/r/20170724100428.19173-1-alexander.shishkin@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Commit b70543a0("x86/idt: Move regular trap init to tables") moves
regular trap init for each trap vector into a table based
initialization. It introduced the initialization for vector X86_TRAP_BP
which was not in the code which it replaced. This breaks uprobe
functionality for x86_32; the probed program segfaults instead of handling
the probe proper.

The reason for this is that TRAP_BP is set up as system interrupt gate
(DPL3) in the early IDT and then replaced by a regular interrupt gate
(DPL0) in idt_setup_traps(). The DPL0 restriction causes the int3 trap
to fail with a #GP resulting in a SIGSEGV of the probed program.

On 64bit this does not cause a problem because the IDT entry is replaced
with a system interrupt gate (DPL3) with interrupt stack afterwards.

Remove X86_TRAP_BP from the def_idts table which is used in
idt_setup_traps(). Remove a redundant entry for X86_TRAP_NMI in def_idts
while at it. Tested on both x86_64 and x86_32.

[ tglx: Amended changelog with a description of the root cause ]

Fixes: b70543a0("x86/idt: Move regular trap init to tables")
Reported-and-tested-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: a.p.zijlstra@chello.nl
Cc: ast@fb.com
Cc: oleg@redhat.com
Cc: luto@kernel.org
Cc: kernel-team@fb.com
Link: https://lkml.kernel.org/r/20171108192845.552709-1-yhs@fb.com

Fengguang reported a KASAN warning:

  Kprobe smoke test: started
  ==================================================================
  BUG: KASAN: stack-out-of-bounds in deref_stack_reg+0xb5/0x11a
  Read of size 8 at addr ffff8800001c7cd8 by task swapper/1

  CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.0-rc8 #26
  Call Trace:
   <#DB>
   ...
   save_trace+0xd9/0x1d3
   mark_lock+0x5f7/0xdc3
   __lock_acquire+0x6b4/0x38ef
   lock_acquire+0x1a1/0x2aa
   _raw_spin_lock_irqsave+0x46/0x55
   kretprobe_table_lock+0x1a/0x42
   pre_handler_kretprobe+0x3f5/0x521
   kprobe_int3_handler+0x19c/0x25f
   do_int3+0x61/0x142
   int3+0x30/0x60
  [...]

The ORC unwinder got confused by some kprobes changes, which isn't
surprising since the runtime code no longer matches vmlinux and the
stack was modified for kretprobes.

Until we have a way for generated code to register changes with the
unwinder, these types of warnings are inevitable.  So just disable KASAN
checks for stack accesses in the ORC unwinder.
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171108021934.zbl6unh5hpugybc5@trebleSigned-off-by: NIngo Molnar <mingo@kernel.org>

If the TSC has constant frequency then the delay calibration can be skipped
when it has been calibrated for a package already. This is checked in
calibrate_delay_is_known(), but that function is buggy in two aspects:

It returns 'false' if

  (!tsc_disabled && !cpu_has(&cpu_data(cpu), X86_FEATURE_CONSTANT_TSC)

which is obviously the reverse of the intended check and the check for the
sibling mask cannot work either because the topology links have not been
set up yet.

Correct the condition and move the call to set_cpu_sibling_map() before
invoking calibrate_delay() so the sibling check works correctly.

[ tglx: Rewrote changelong ]

Fixes: c25323c0 ("x86/tsc: Use topology functions")
Signed-off-by: NPavel Tatashin <pasha.tatashin@oracle.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: peterz@infradead.org
Cc: bob.picco@oracle.com
Cc: steven.sistare@oracle.com
Cc: daniel.m.jordan@oracle.com
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20171028001100.26603-1-pasha.tatashin@oracle.com

There have been some cases where external tooling (e.g., kpatch-build)
creates a corrupt relocation which targets the wrong address.  This is a
silent failure which can corrupt memory in unexpected places.

On x86, the bytes of data being overwritten by relocations are always
initialized to zero beforehand.  Use that knowledge to add sanity checks
to detect such cases before they corrupt memory.
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jeyu@kernel.org
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/37450d6c6225e54db107fba447ce9e56e5f758e9.1509713553.git.jpoimboe@redhat.com
[ Restructured the messages, as it's unclear whether the relocation or the target is corrupted. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Commit 890da9cf (Revert "x86: do not use cpufreq_quick_get() for
/proc/cpuinfo "cpu MHz"") is not sufficient to restore the previous
behavior of "cpu MHz" in /proc/cpuinfo on x86 due to some changes
made after the commit it has reverted.

To address this, make the code in question use arch_freq_get_on_cpu()
which also is used by cpufreq for reporting the current frequency of
CPUs and since that function doesn't really depend on cpufreq in any
way, drop the CONFIG_CPU_FREQ dependency for the object file
containing it.

Also refactor arch_freq_get_on_cpu() somewhat to avoid IPIs and
return cached values right away if it is called very often over a
short time (to prevent user space from triggering IPI storms through
it).

Fixes: 890da9cf (Revert "x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz"")
Cc: stable@kernel.org   # 4.13 - together with 890da9cfSigned-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit 51204e06.

There wasn't really any good reason for it, and people are complaining
(rightly) that it broke existing practice.

Cc: Len Brown <len.brown@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

kvm does not support setting the RTC, so the correct result is -ENODEV.
Returning -1 will cause sync_cmos_clock to keep trying to set the RTC
every second.
Signed-off-by: NJason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Peter pointed out that the set/clear_bit32() variants are broken in various
aspects.

Replace them with open coded set/clear_bit() and type cast
cpu_info::x86_capability as it's done in all other places throughout x86.

Fixes: 0b00de85 ("x86/cpuid: Add generic table for CPUID dependencies")
Reported-by: NPeter Ziljstra <peterz@infradead.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@linux.intel.com>

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Let's keep the stack-related logic together rather than open-coding
a comparison in an assertion in the traps code.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Reviewed-by: NBorislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/856b15bee1f55017b8f79d3758b0d51c48a08cf8.1509609304.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

On x86_64, we can easily calculate sp0 when needed instead of
storing it in thread_struct.

On x86_32, a similar cleanup would be possible, but it would require
cleaning up the vm86 code first, and that can wait for a later
cleanup series.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/719cd9c66c548c4350d98a90f050aee8b17f8919.1509609304.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

cpu_current_top_of_stack's initialization forgot about
TOP_OF_KERNEL_STACK_PADDING.  This bug didn't matter because the
idle threads never enter user mode.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Reviewed-by: NBorislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/e5e370a7e6e4fddd1c4e4cf619765d96bb874b21.1509609304.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

The only remaining readers in context switch code or vm86(), and
they all just want to update TSS.sp0 to match the current task.
Replace them all with a new helper update_sp0().
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Reviewed-by: NBorislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/2d231687f4ff288c9d9e98d7861b7df374246ac3.1509609304.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

In my quest to get rid of thread_struct::sp0, I want to clean up or
remove all of its readers.  Two of them are in cpu_init() (32-bit and
64-bit), and they aren't needed.  This is because we never enter
userspace at all on the threads that CPUs are initialized in.

Poison the initial TSS.sp0 and stop initializing it on CPU init.

The comment text mostly comes from Dave Hansen.  Thanks!
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/ee4a00540ad28c6cff475fbcc7769a4460acc861.1509609304.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

load_sp0() had an odd signature:

  void load_sp0(struct tss_struct *tss, struct thread_struct *thread);

Simplify it to:

  void load_sp0(unsigned long sp0);

Also simplify a few get_cpu()/put_cpu() sequences to
preempt_disable()/preempt_enable().
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Reviewed-by: NBorislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/2655d8b42ed940aa384fe18ee1129bbbcf730a08.1509609304.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

This causes the MSR_IA32_SYSENTER_CS write to move out of the
paravirt callback.  This shouldn't affect Xen PV: Xen already ignores
MSR_IA32_SYSENTER_ESP writes.  In any event, Xen doesn't support
vm86() in a useful way.

Note to any potential backporters: This patch won't break lguest, as
lguest didn't have any SYSENTER support at all.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/75cf09fe03ae778532d0ca6c65aa58e66bc2f90c.1509609304.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

These code paths will diverge soon.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/dccf8c7b3750199b4b30383c812d4e2931811509.1509609304.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Both head_32.S and head_64.S utilize the same value to initialize the
control register CR0. Also, other parts of the kernel might want to access
this initial definition (e.g., emulation code for User-Mode Instruction
Prevention uses this state to provide a sane dummy value for CR0 when
emulating the smsw instruction). Thus, relocate this definition to a
header file from which it can be conveniently accessed.
Suggested-by: NBorislav Petkov <bp@alien8.de>
Signed-off-by: NRicardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NBorislav Petkov <bp@suse.de>
Reviewed-by: NAndy Lutomirski <luto@kernel.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: ricardo.neri@intel.com
Cc: linux-mm@kvack.org
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-arch@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: "Ravi V. Shankar" <ravi.v.shankar@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Chen Yucong <slaoub@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lkml.kernel.org/r/1509135945-13762-3-git-send-email-ricardo.neri-calderon@linux.intel.com

Jeremy reported a suspicious RCU usage warning in mcelog.

/dev/mcelog is called in process context now as part of the notifier
chain and doesn't need any of the fancy RCU and lockless accesses which
it did in atomic context.

Axe it all in favor of a simple mutex synchronization which cures the
problem reported.

Fixes: 5de97c9f ("x86/mce: Factor out and deprecate the /dev/mcelog driver")
Reported-by: NJeremy Cline <jcline@redhat.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-and-tested-by: NTony Luck <tony.luck@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: linux-edac@vger.kernel.org
Cc: Laura Abbott <labbott@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20171101164754.xzzmskl4ngrqc5br@pd.tnic
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1498969

Add a few new SSE/AVX/AVX512 instruction groups/features for enumeration
in /proc/cpuinfo: AVX512_VBMI2, GFNI, VAES, VPCLMULQDQ, AVX512_VNNI,
AVX512_BITALG.

 CPUID.(EAX=7,ECX=0):ECX[bit 6]  AVX512_VBMI2
 CPUID.(EAX=7,ECX=0):ECX[bit 8]  GFNI
 CPUID.(EAX=7,ECX=0):ECX[bit 9]  VAES
 CPUID.(EAX=7,ECX=0):ECX[bit 10] VPCLMULQDQ
 CPUID.(EAX=7,ECX=0):ECX[bit 11] AVX512_VNNI
 CPUID.(EAX=7,ECX=0):ECX[bit 12] AVX512_BITALG

Detailed information of CPUID bits for these features can be found
in the Intel Architecture Instruction Set Extensions and Future Features
Programming Interface document (refer to Table 1-1. and Table 1-2.).
A copy of this document is available at
https://bugzilla.kernel.org/show_bug.cgi?id=197239Signed-off-by: NGayatri Kammela <gayatri.kammela@intel.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Cc: Ricardo Neri <ricardo.neri@intel.com>
Cc: Yang Zhong <yang.zhong@intel.com>
Cc: bp@alien8.de
Link: http://lkml.kernel.org/r/1509412829-23380-1-git-send-email-gayatri.kammela@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

I find the '.ifeq <expression>' directive to be confusing.  Reading it
quickly seems to suggest its opposite meaning, or that it's missing an
argument.

Improve readability by replacing all of its x86 uses with
'.if <expression> == 0'.
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrei Vagin <avagin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/757da028e802c7e98d23fbab8d234b1063e161cf.1508516398.git.jpoimboe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Improve the warning messages to show the relevant function name+offset.
This makes it much easier to diagnose problems with the ORC metadata.

Before:

  WARNING: can't dereference iret registers at ffff8801c5f17fe0 for ip ffffffff95f0d94b

After:

  WARNING: can't dereference iret registers at ffff880178f5ffe0 for ip int3+0x5b/0x60
Reported-by: NAndrei Vagin <avagin@virtuozzo.com>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: ee9f8fce ("x86/unwind: Add the ORC unwinder")
Link: http://lkml.kernel.org/r/6bada6b9eac86017e16bd79e1e77877935cb50bb.1508516398.git.jpoimboe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Some F14h machines have an erratum which, "under a highly specific
and detailed set of internal timing conditions" can lead to skipping
instructions and RIP corruption.

Add the fix for those machines when their BIOS doesn't apply it or
there simply isn't BIOS update for them.

Tested-by: <mirh@protonmail.ch>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sherry Hurwitz <sherry.hurwitz@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
Link: http://lkml.kernel.org/r/20171022104731.28249-1-bp@alien8.de
Link: https://bugzilla.kernel.org/show_bug.cgi?id=197285
[ Added pr_info() that we activated the workaround. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Looks like we only need pre-built page tables in the CONFIG_XEN_PV=y and
CONFIG_XEN_PVH=y cases.

Let's not provide them for other configurations.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: NJuergen Gross <jgross@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@suse.de>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170929140821.37654-5-kirill.shutemov@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

We are going to support boot-time switching between 4- and 5-level
paging. For KASAN it means we cannot have different KASAN_SHADOW_OFFSET
for different paging modes: the constant is passed to gcc to generate
code and cannot be changed at runtime.

This patch changes KASAN code to use 0xdffffc0000000000 as shadow offset
for both 4- and 5-level paging.

For 5-level paging it means that shadow memory region is not aligned to
PGD boundary anymore and we have to handle unaligned parts of the region
properly.

In addition, we have to exclude paravirt code from KASAN instrumentation
as we now use set_pgd() before KASAN is fully ready.

[kirill.shutemov@linux.intel.com: clenaup, changelog message]
Signed-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@suse.de>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170929140821.37654-4-kirill.shutemov@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

We do not have tracepoints for sys_modify_ldt() because we define
it directly instead of using the normal SYSCALL_DEFINEx() macros.

However, there is a reason sys_modify_ldt() does not use the macros:
it has an 'int' return type instead of 'unsigned long'.  This is
a bug, but it's a bug cemented in the ABI.

What does this mean?  If we return -EINVAL from a function that
returns 'int', we have 0x00000000ffffffea in %rax.  But, if we
return -EINVAL from a function returning 'unsigned long', we end
up with 0xffffffffffffffea in %rax, which is wrong.

To work around this and maintain the 'int' behavior while using
the SYSCALL_DEFINEx() macros, so we add a cast to 'unsigned int'
in both implementations of sys_modify_ldt().
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: NAndy Lutomirski <luto@kernel.org>
Reviewed-by: NBrian Gerst <brgerst@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171018172107.1A79C532@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

do_clear_cpu_cap() allocates a bitmap to keep track of disabled feature
dependencies. That bitmap is sized NCAPINTS * BITS_PER_INIT. The possible
'features' which can be handed in are larger than this, because after the
capabilities the bug 'feature' bits occupy another 32bit. Not really
obvious...

So clearing any of the misfeature bits, as 32bit does for the F00F bug,
accesses that bitmap out of bounds thereby corrupting the stack.

Size the bitmap proper and add a sanity check to catch accidental out of
bound access.

Fixes: 0b00de85 ("x86/cpuid: Add generic table for CPUID dependencies")
Reported-by: Nkernel test robot <xiaolong.ye@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/20171018022023.GA12058@yexl-desktop

Blacklist Broadwell X model 79 for late loading due to an erratum.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Acked-by: NTony Luck <tony.luck@intel.com>
Cc: <stable@vger.kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171018111225.25635-1-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

Clearing a CPU feature with setup_clear_cpu_cap() clears all features
which depend on it. Expressing feature dependencies in one place is
easier to maintain than keeping functions like
fpu__xstate_clear_all_cpu_caps() up to date.

The features which depend on XSAVE have their dependency expressed in the
dependency table, so its sufficient to clear X86_FEATURE_XSAVE.

Remove the explicit clearing of XSAVE dependent features.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171013215645.23166-6-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Before enabling XSAVE, not only check the XSAVE specific CPUID bits,
but also the base CPUID features of the respective XSAVE feature.
This allows to disable individual XSAVE states using the existing
clearcpuid= option, which can be useful for performance testing
and debugging, and also in general avoids inconsistencies.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171013215645.23166-5-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

With a followon patch we want to make clearcpuid affect the XSAVE
configuration. But xsave is currently initialized before arguments
are parsed. Move the clearcpuid= parsing into the special
early xsave argument parsing code.

Since clearcpuid= contains a = we need to keep the old __setup
around as a dummy, otherwise it would end up as a environment
variable in init's environment.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171013215645.23166-4-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Some CPUID features depend on other features. Currently it's
possible to to clear dependent features, but not clear the base features,
which can cause various interesting problems.

This patch implements a generic table to describe dependencies
between CPUID features, to be used by all code that clears
CPUID.

Some subsystems (like XSAVE) had an own implementation of this,
but it's better to do it all in a single place for everyone.

Then clear_cpu_cap and setup_clear_cpu_cap always look up
this table and clear all dependencies too.

This is intended to be a practical table: only for features
that make sense to clear. If someone for example clears FPU,
or other features that are essentially part of the required
base feature set, not much is going to work. Handling
that is right now out of scope. We're only handling
features which can be usefully cleared.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Jonathan McDowell <noodles@earth.li>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171013215645.23166-3-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Moving the early IDT setup out of assembly code breaks the boot on first
generation 486 systems.

The reason is that the call of idt_setup_early_handler, which sets up the
early handlers was added after the call to cr4_init_shadow().

cr4_init_shadow() tries to read CR4 which is not available on those
systems. The accessor function uses a extable fixup to handle the resulting
fault. As the IDT is not set up yet, the cr4 read exception causes an
instantaneous reboot for obvious reasons.

Call idt_setup_early_handler() before cr4_init_shadow() so IDT is set up
before the first exception hits.

Fixes: 87e81786 ("x86/idt: Move early IDT setup out of 32-bit asm")
Reported-and-tested-by: NMatthew Whitehead <whiteheadm@acm.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1710161210290.1973@nanos

The 'this_leaf' variable is assigned a value that is never
read and it is updated a little later with a newer value,
hence we can remove the redundant assignment.

Cleans up the following Clang warning:

  Value stored to 'this_leaf' is never read
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NBorislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-janitors@vger.kernel.org
Link: http://lkml.kernel.org/r/20171015160203.12332-1-colin.king@canonical.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

On CPUs like AMD's Geode, for example, we shouldn't even try to load
microcode because they do not support the modern microcode loading
interface.

However, we do the family check *after* the other checks whether the
loader has been disabled on the command line or whether we're running in
a guest.

So move the family checks first in order to exit early if we're being
loaded on an unsupported family.
Reported-and-tested-by: NSven Glodowski <glodi1@arcor.de>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org> # 4.11..
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://bugzilla.suse.com/show_bug.cgi?id=1061396
Link: http://lkml.kernel.org/r/20171012112316.977-1-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

Rename the unwinder config options from:

  CONFIG_ORC_UNWINDER
  CONFIG_FRAME_POINTER_UNWINDER
  CONFIG_GUESS_UNWINDER

to:

  CONFIG_UNWINDER_ORC
  CONFIG_UNWINDER_FRAME_POINTER
  CONFIG_UNWINDER_GUESS

... in order to give them a more logical config namespace.
Suggested-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/73972fc7e2762e91912c6b9584582703d6f1b8cc.1507924831.git.jpoimboe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

SKX stepping-3 fixed the TSC_DEADLINE issue in a different ucode
version number than stepping-4.  Linux needs to know this stepping-3
specific version number to also enable the TSC_DEADLINE on stepping-3.

The steppings and ucode versions are documented in the SKX BIOS update:
https://downloadmirror.intel.com/26978/eng/ReleaseNotes_R00.01.0004.txtSigned-off-by: NLen Brown <len.brown@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: peterz@infradead.org
Link: https://lkml.kernel.org/r/60f2bbf7cf617e212b522e663f84225bfebc50e5.1507756305.git.len.brown@intel.com

Commit 594a30fb ("x86/apic: Silence "FW_BUG TSC_DEADLINE disabled
due to Errata" on CPUs without the feature", 2017-08-30) was also about
silencing the warning on VirtualBox; however, KVM does expose the TSC
deadline timer, and it's virtualized so that it is immune from CPU errata.

Therefore, booting 4.13 with "-cpu Haswell" shows this in the logs:

     [    0.000000] [Firmware Bug]: TSC_DEADLINE disabled due to Errata;
                    please update microcode to version: 0xb2 (or later)

Even if you had a hypervisor that does _not_ virtualize the TSC deadline
and rather exposes the hardware one, it should be the hypervisors task
to update microcode and possibly hide the flag from CPUID.  So just
hide the message when running on _any_ hypervisor, not just those that
do not support the TSC deadline timer.

The older check still makes sense, so keep it.

Fixes: bd9240a1 ("x86/apic: Add TSC_DEADLINE quirk due to errata")
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1507630377-54471-1-git-send-email-pbonzini@redhat.com