- 28 4月, 2018 10 次提交
-
-
git://github.com/ceph/ceph-client由 Linus Torvalds 提交于
Pull ceph fixes from Ilya Dryomov: "A CephFS quota follow-up and fixes for two older issues in the messenger layer, marked for stable" * tag 'ceph-for-4.17-rc3' of git://github.com/ceph/ceph-client: libceph: validate con->state at the top of try_write() libceph: reschedule a tick in finish_hunting() libceph: un-backoff on tick when we have a authenticated session ceph: check if mds create snaprealm when setting quota
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Pull char/misc driver fixes from Greg KH: "Here are some small char and misc driver fixes for 4.17-rc3 A variety of small things that have fallen out after 4.17-rc1 was out. Some vboxguest fixes for systems with lots of memory, amba bus fixes, some MAINTAINERS updates, uio_hv_generic driver fixes, and a few other minor things that resolve problems that people reported. The amba bus fixes took twice to get right, the first time I messed up applying the patches in the wrong order, hence the revert and later addition again with the correct fix, sorry about that. All of these have been in linux-next with no reported issues" * tag 'char-misc-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: ARM: amba: Fix race condition with driver_override ARM: amba: Make driver_override output consistent with other buses Revert "ARM: amba: Fix race condition with driver_override" ARM: amba: Don't read past the end of sysfs "driver_override" buffer ARM: amba: Fix race condition with driver_override virt: vbox: Log an error when we fail to get the host version virt: vbox: Use __get_free_pages instead of kmalloc for DMA32 memory virt: vbox: Add vbg_req_free() helper function virt: vbox: Move declarations of vboxguest private functions to private header slimbus: Fix out-of-bounds access in slim_slicesize() MAINTAINERS: add dri-devel&linaro-mm for Android ION fpga-manager: altera-ps-spi: preserve nCONFIG state MAINTAINERS: update my email address uio_hv_generic: fix subchannel ring mmap uio_hv_generic: use correct channel in isr uio_hv_generic: make ring buffer attribute for primary channel uio_hv_generic: set size of ring buffer attribute ANDROID: binder: prevent transactions into own process.
-
由 Linus Torvalds 提交于
Merge tag 'driver-core-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg Kroah-Hartman: "Here are some small driver core and firmware fixes for 4.17-rc3 There's a kobject WARN() removal to make syzkaller a lot happier about some "normal" error paths that it keeps hitting, which should reduce the number of false-positives we have been getting recently. There's also some fimware test and documentation fixes, and the coredump() function signature change that needed to happen after -rc1 before drivers started to take advantage of it. All of these have been in linux-next with no reported issues" * tag 'driver-core-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: firmware: some documentation fixes selftests:firmware: fixes a call to a wrong function name kobject: don't use WARN for registration failures firmware: Fix firmware documentation for recent file renames test_firmware: fix setting old custom fw path back on exit, second try test_firmware: Install all scripts drivers: change struct device_driver::coredump() return type to void
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull tty/serial fixes from Greg KH: "Here are some tty and serial driver fixes for reported issues for 4.17-rc3. Nothing major, but a number of small things: - device tree fixes/updates for serial ports - earlycon fixes - n_gsm fixes - tty core change reverted to help resolve syszkaller reports - other serial driver small fixes All of these have been in linux-next with no reported issues" * tag 'tty-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: Use __GFP_NOFAIL for tty_ldisc_get() tty: serial: xuartps: Setup early console when uartclk is also passed tty: Don't call panic() at tty_ldisc_init() tty: Avoid possible error pointer dereference at tty_ldisc_restore(). dt-bindings: mvebu-uart: DT fix s/interrupts-names/interrupt-names/ tty: serial: qcom_geni_serial: Use signed variable to get IRQ earlycon: Use a pointer table to fix __earlycon_table stride serial: sh-sci: Document r8a77470 bindings dt-bindings: meson-uart: DT fix s/clocks-names/clock-names/ serial: imx: fix cached UCR2 read on software reset serial: imx: warn user when using unsupported configuration serial: mvebu-uart: Fix local flags handling on termios update tty: n_gsm: Fix DLCI handling for ADM mode if debug & 2 is not set tty: n_gsm: Fix long delays with control frame timeouts in ADM mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging fixes from Greg KH: "Here are two staging driver fixups for 4.17-rc3. The first is the remaining stragglers of the irda code removal that you pointed out during the merge window. The second is a fix for the wilc1000 driver due to a patch that got merged in 4.17-rc1. Both of these have been in linux-next for a while with no reported issues" * tag 'staging-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: wilc1000: fix NULL pointer exception in host_int_parse_assoc_resp_info() staging: irda: remove remaining remants of irda code removal
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg KH: "Here are a number of USB driver fixes for reported problems for 4.17-rc3. The "largest" here is a number of phy core changes for reported problems with the -rc1 release. There's also the usual musb and xhci fixes, as well as new device id updates. There are also some usbip fixes for reported problems as more people start to use that code with containers. All of these have been in linux-next with no reported issues, except the last few new device ids, which are "obviously correct" :)" * tag 'usb-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits) USB: musb: dsps: drop duplicate phy initialisation USB: musb: host: prevent core phy initialisation usb: core: phy: add the SPDX-License-Identifier and include guard xhci: Fix Kernel oops in xhci dbgtty usb: select USB_COMMON for usb role switch config usb: core: phy: add missing forward declaration for "struct device" usb: core: phy: make it a no-op if CONFIG_GENERIC_PHY is disabled usb: core: use phy_exit during suspend if wake up is not supported usb: core: split usb_phy_roothub_{init,alloc} usb: core: phy: fix return value of usb_phy_roothub_exit() usb: typec: ucsi: Increase command completion timeout value Revert "xhci: plat: Register shutdown for xhci_plat" usb: core: Add quirk for HP v222w 16GB Mini Documentation: typec.rst: Use literal-block element with ascii art usb: typec: ucsi: fix tracepoint related build error usbip: usbip_event: fix to not print kernel pointer address usbip: usbip_host: fix to hold parent lock for device_attach() calls usbip: vhci_hcd: Fix usb device and sockfd leaks usbip: vhci_hcd: check rhport before using in vhci_hub_control() USB: Increment wakeup count on remote wakeup. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "A significant amount of fixes have been piled up at this time. - Possible Spectre v1 coverage in OSS sequencer API, control API, HD-audio hwdep ioctl, ASIHPI hwdep ioctl, OPL3, and HDSPM/RME channel_info API. - A regression fix in PCM delay reporting that happened at the code refactoring for the set_fs() removal - The long-standing bug in PCM sync_ptr ioctl that missed the audio timestamp field - USB-audio regression fixes due to the recent UAC2 jack support - vm_fault_t conversions in a couple of places - ASoC topology API fixes - Assorted driver fixes: * ASoC rsnd, FSL, Intel SST, DMIC, AMD, ADAU17x1, Realtek codec * FireWire typo fix * HD-audio quirks and USB-audio Dell fixup * USB-audio UAC3 corrections" * tag 'sound-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (35 commits) ALSA: dice: fix error path to destroy initialized stream data ALSA: hda - Skip jack and others for non-existing PCM streams ALSA: hda/realtek - change the location for one of two front mics ALSA: rme9652: Hardening for potential Spectre v1 ALSA: hdspm: Hardening for potential Spectre v1 ALSA: asihpi: Hardening for potential Spectre v1 ALSA: opl3: Hardening for potential Spectre v1 ALSA: hda: Hardening for potential Spectre v1 ALSA: control: Hardening for potential Spectre v1 ALSA: seq: oss: Hardening for potential Spectre v1 ALSA: seq: oss: Fix unbalanced use lock for synth MIDI device ALSA: hda/realtek - Update ALC255 depop optimize ALSA: hda/realtek - Add some fixes for ALC233 ALSA: pcm: Change return type to vm_fault_t ALSA: usx2y: Change return type to vm_fault_t ALSA: usb-audio: ADC3: Fix channel mapping conversion for ADC3. ALSA: dice: fix OUI for TC group ALSA: usb-audio: Skip broken EU on Dell dock USB-audio ALSA: usb-audio: Fix missing endian conversion ALSA: usb-audio: Fix forgotten conversion of control query functions ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Arnd Bergmann: "This round of fixes has two larger changes that came in last week: - a couple of patches all intended to finally turn on USB support on various Amlogic SoC based boards. The respective driver were not finalized until very late before the merge window and the DT portion is the last bit now. - a defconfig update for gemini that had repeatedly missed the cut but that is required to actually boot any real machines with the default build. The rest are the usual small changes: - a fix for a nasty build regression on the OMAP memory drivers - a fix for a boot problem on Intel/Altera SocFPGA - a MAINTAINER file update - a couple of fixes for issues found by automated testing (kernelci, coverity, sparse, ...) - a few incorrect DT entries are updated to match the hardware" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: defconfig: Update Gemini defconfig ARM: s3c24xx: jive: Fix some GPIO names HISI LPC: Add Kconfig MFD_CORE dependency ARM: dts: Fix NAS4220B pin config MAINTAINERS: Remove myself as maintainer arm64: dts: correct SATA addresses for Stingray ARM64: dts: meson-gxm-khadas-vim2: enable the USB controller ARM64: dts: meson-gxl-nexbox-a95x: enable the USB controller ARM64: dts: meson-gxl-s905x-libretech-cc: enable the USB controller ARM64: dts: meson-gx-p23x-q20x: enable the USB controller ARM64: dts: meson-gxl-s905x-p212: enable the USB controller ARM64: dts: meson-gxm: add GXM specific USB host configuration ARM64: dts: meson-gxl: add USB host support ARM: OMAP2+: Fix build when using split object directories soc: bcm2835: Make !RASPBERRYPI_FIRMWARE dummies return failure soc: bcm: raspberrypi-power: Fix use of __packed ARM: dts: Fix cm2 and prm sizes for omap4 ARM: socfpga_defconfig: Remove QSPI Sector 4K size force firmware: arm_scmi: remove redundant null check on array arm64: dts: juno: drop unnecessary address-cells and size-cells properties
-
git://git.infradead.org/linux-mtd由 Linus Torvalds 提交于
Pull mtd fixes from Boris Brezillon: - Fix nanddev_mtd_erase() function to match the changes done in e7bfb3fd ("mtd: Stop updating erase_info->state and calling mtd_erase_callback()") - Fix a memory leak in the Tango NAND controller driver - Fix read/write to a suspended erase block in the CFI driver - Fix the DT parsing logic in the Marvell NAND controller driver * tag 'mtd/fixes-for-4.17-rc3' of git://git.infradead.org/linux-mtd: mtd: rawnand: marvell: fix the chip-select DT parsing logic mtd: cfi: cmdset_0002: Do not allow read/write to suspend erase block. mtd: cfi: cmdset_0001: Workaround Micron Erase suspend bug. mtd: cfi: cmdset_0001: Do not allow read/write to suspend erase block. mtd: spi-nor: cadence-quadspi: Fix page fault kernel panic mtd: nand: Fix nanddev_mtd_erase() mtd: rawnand: tango: Fix struct clk memory leak
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Pretty run of the mill for this stage in the cycle: msm, i915, amdgpu, qxl, virtio-gpu, sun4i fixes. i915: - Black screen fixes - Display w/a fix - HDA codec interop fix sun4i: - tbsa711 tablet regression fix qxl: - Regression fixes due to changes in TTM virtio: - Fix wait event condition msm: - DSI display fixes amdgpu: - fix hang on Carrizo - DP MST hang fixes - irq handling deadlock in DC. amdkfd: - Fix Kconfig issue - Clock retrieval fix - Sparse fixes" * tag 'drm-fixes-for-v4.17-rc3' of git://people.freedesktop.org/~airlied/linux: (27 commits) drm/edid: Reset more of the display info drm/virtio: fix vq wait_event condition qxl: keep separate release_bo pointer qxl: fix qxl_release_{map,unmap} Revert "drm/sun4i: add lvds mode_valid function" drm/amd/display: Check dc_sink every time in MST hotplug drm/amd/display: Update MST edid property every time drm/amd/display: Don't read EDID in atomic_check drm/amd/display: Disallow enabling CRTC without primary plane with FB drm/amd/display: Fix deadlock when flushing irq drm/i915/fbdev: Enable late fbdev initial configuration drm/i915: Use ktime on wait_for drm/amdgpu: set COMPUTE_PGM_RSRC1 for SGPR/VGPR clearing shaders drm/amdkfd: fix build, select MMU_NOTIFIER drm/amdkfd: fix clock counter retrieval for node without GPU drm/amdkfd: Fix the error return code in kfd_ioctl_unmap_memory_from_gpu() drm/amdkfd: kfd_dev_is_large_bar() can be static drm/i915: Enable display WA#1183 from its correct spot drm/i915/audio: set minimum CD clock to twice the BCLK drm/msm: don't deref error pointer in the msm_fbdev_create error path ...
-
- 27 4月, 2018 12 次提交
-
-
由 Arnd Bergmann 提交于
Merge tag 'arm-soc/for-4.17/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux into fixes Pull "Broadcom devicetree-arm64 fixes for 4.17" from Florian Fainelli: This pull request contains Broadcom ARM64-based SoCs Device Tree fixes for 4.17, please pull the following: - Srinath fixes the register base address of all SATA controllers on Stingray * tag 'arm-soc/for-4.17/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux: arm64: dts: correct SATA addresses for Stingray
-
由 Dave Airlie 提交于
Merge tag 'drm-intel-fixes-2018-04-26' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix for black screen issues (FDO #104158 and #104425) - A correction for wrongly applied display W/A - Fixes for HDA codec interop issue (no audio) and too eager HW timeouts * tag 'drm-intel-fixes-2018-04-26' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915/fbdev: Enable late fbdev initial configuration drm/i915: Use ktime on wait_for drm/i915: Enable display WA#1183 from its correct spot drm/i915/audio: set minimum CD clock to twice the BCLK
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost由 Linus Torvalds 提交于
Pull virtio fixups from Michael Tsirkin: - Latest header update will break QEMU (if it's rebuilt with the new header) - and it seems that the code there is so fragile that any change in this header will break it. Add a better interface so users do not need to change their code every time that header changes. - Fix virtio console for spec compliance. * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_console: reset on out of memory virtio_console: move removal code virtio_console: drop custom control queue cleanup virtio_console: free buffers after reset virtio: add ability to iterate over vqs virtio_console: don't tie bufs to a vq virtio_balloon: add array of stat names
-
由 Linus Torvalds 提交于
Merge tag 'hwmon-for-linus-v4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Add support for new Ryzen chips to k10temp driver ... making Phoronix happy - Fix inconsistent chip access in nct6683 driver - Handle absence of few types of sensors in scmi driver * tag 'hwmon-for-linus-v4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (k10temp) Add support for AMD Ryzen w/ Vega graphics hwmon: (k10temp) Add temperature offset for Ryzen 2700X hwmon: (nct6683) Enable EC access if disabled at boot hwmon: (scmi) handle absence of few types of sensors
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI fixes from Bjorn Helgaas: - fix Aardvark MRRS setting (Evan Wang) - clarify "bandwidth available" link status message (Jakub Kicinski) - update Kirin GPIO name to fix probe failure (Loic Poulain) - fix Aardvark IRQ usage (Victor Gu) - fix Aardvark config accessor issues (Victor Gu) * tag 'pci-v4.17-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Add "PCIe" to pcie_print_link_status() messages PCI: kirin: Fix reset gpio name PCI: aardvark: Fix PCIe Max Read Request Size setting PCI: aardvark: Use ISR1 instead of ISR0 interrupt in legacy irq mode PCI: aardvark: Set PIO_ADDR_LS correctly in advk_pcie_rd_conf() PCI: aardvark: Fix logic in advk_pcie_{rd,wr}_conf()
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace由 Linus Torvalds 提交于
Pull tracing fixes from Steven Rostedt: - Add workqueue forward declaration (for new work, but a nice clean up) - seftest fixes for the new histogram code - Print output fix for hwlat tracer - Fix missing system call events - due to change in x86 syscall naming - Fix kprobe address being used by perf being hashed * tag 'trace-v4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix missing tab for hwlat_detector print format selftests: ftrace: Add a testcase for multiple actions on trigger selftests: ftrace: Fix trigger extended error testcase kprobes: Fix random address output of blacklist file tracing: Fix kernel crash while using empty filter with perf tracing/x86: Update syscall trace events to handle new prefixed syscall func names tracing: Add missing forward declaration
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI fixes from Rafael Wysocki: "These are two watchdog-related fixes, fix for a backlight regression from the 4.16 cycle that unfortunately was propagated to -stable and a button module modification to prevent graphics driver modules from failing to load due to unmet dependencies if ACPI is disabled from the kernel command line. Specifics: - Change the ACPI subsystem initialization ordering to initialize the WDAT watchodg before reserving PNP motherboard resources so as to allow the watchdog to allocate its resources before the PNP code gets to them and prevents it from working correctly (Mika Westerberg). - Add a quirk for Lenovo Z50-70 to use the iTCO watchdog instead of the WDAT one which conflicts with the RTC on that platform (Mika Westerberg). - Avoid breaking backlight handling on Dell XPS 13 2013 model by allowing laptops to use the ACPI backlight by default even if they are Windows 8-ready in principle (Hans de Goede)" * tag 'acpi-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / video: Only default only_lcd to true on Win8-ready _desktops_ ACPI / button: make module loadable when booted in non-ACPI mode ACPI / watchdog: Prefer iTCO_wdt on Lenovo Z50-70 ACPI / scan: Initialize watchdog before PNP
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management fixes from Rafael Wysocki: "These are a Low Power S0 Idle quirk, a hibernation handling fix for the PCI bus type and a brcmstb-avs-cpufreq driver fixup removing development debug code from it. Specifics: - Blacklist the Low Power S0 Idle _DSM on ThinkPad X1 Tablet(2016) where it causes issues and make it use ACPI S3 which works instead of the non-working suspend-to-idle by default (Chen Yu). - Fix the handling of hibernation in the PCI core for devices with the DPM_FLAG_SMART_SUSPEND flag set to fix a regression affecting intel-lpss I2C devices (Mika Westerberg). - Drop development debug code from the brcmstb-avs-cpufreq driver (Markus Mayer)" * tag 'pm-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: brcmstb-avs-cpufreq: remove development debug support PCI / PM: Do not clear state_saved in pci_pm_freeze() when smart suspend is set ACPI / PM: Blacklist Low Power S0 Idle _DSM for ThinkPad X1 Tablet(2016)
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random由 Linus Torvalds 提交于
Pull /dev/random fixes from Ted Ts'o: "Fix a regression on NUMA kernels and suppress excess unseeded entropy pool warnings" * tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: rate limit unseeded randomness warnings random: fix possible sleeping allocation from irq context
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 fixes from Martin Schwidefsky: "A couple of bug fixes: - correct some CPU-MF counter names for z13 and z14 - correct locking in the vfio-ccw fsm_io_helper function - provide arch_uretprobe_is_alive to avoid sigsegv with uretprobes - fix a corner case with CPU-MF sampling in regard to execve - fix expoline code revert for loadable modules - update chpid descriptor for resource accessibility events - fix dasd I/O errors due to outdated device alias infomation" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: correct module section names for expoline code revert vfio: ccw: process ssch with interrupts disabled s390: update sampling tag after task pid change s390/cpum_cf: rename IBM z13/z14 counter names s390/dasd: fix IO error for newly defined devices s390/uprobes: implement arch_uretprobe_is_alive() s390/cio: update chpid descriptor after resource accessibility event
-
由 Greg Kroah-Hartman 提交于
Merge tag 'usb-serial-4.17-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.17-rc3 Here are a few device ids for -rc3, including a new "simple driver". All have been in linux-next with no reported issues. Signed-off-by: NJohan Hovold <johan@kernel.org>
-
由 Miquel Raynal 提交于
The block responsible of parsing the DT for the number of chip-select lines uses an 'if/else if/else if' block. The content of the second and third 'else if' conditions are: 1/ the actual condition to enter the sub-block and 2/ the operation to do in this sub-block. [...] else if (condition1_to_enter && action1() == failed) raise_error(); else if (condition2_to_enter && action2() == failed) raise_error(); [...] In case of failure, the sub-block is entered and an error raised. Otherwise, in case of success, the code would continue erroneously in the next 'else if' statement because it did not failed (and did not enter the first 'else if' sub-block). The first 'else if' refers to legacy bindings while the second 'else if' refers to new bindings. The second 'else if', which is entered erroneously, checks for the 'reg' property, which, for old bindings, does not mean anything because it would not be the number of CS available, but the regular register map of almost any DT node. This being said, the content of the 'reg' property being the register map offset and length, it has '2' values, so the number of CS in this situation is assumed to be '2'. When running nand_scan_ident() with 2 CS, the core will check for an array of chips. It will first issue a RESET and then a READ_ID. Of course this will trigger two timeouts because there is no chip in front of the second CS: [ 1.367460] marvell-nfc f2720000.nand: Timeout on CMDD (NDSR: 0x00000080) [ 1.474292] marvell-nfc f2720000.nand: Timeout on CMDD (NDSR: 0x00000280) Indeed, this is harmless and the core will then assume there is only one valid CS. Fix the logic in the whole block by entering each sub-block just on the 'is legacy' condition, doing the action inside the sub-block. This way, when the action succeeds, the whole block is left. Furthermore, for both the old bindings and the new bindings the same logic was applied to retrieve the number of CS lines: using of_get_property() to get a size in bytes, converted in the actual number of lines by dividing it per sizeof(u32) (4 bytes). This is fine for the 'reg' property which is a list of the CS IDs but not for the 'num-cs' property which is directly the value of the number of CS. Anyway, no existing DT uses another value than 'num-cs = <1>' and no other value has ever been supported by the old driver (pxa3xx_nand.c). Remove this condition and apply a number of 1 CS anyway, as already described in the bindings. Finally, the 'reg' property of a 'nand' node (with the new bindings) gives the IDs of each CS line in use. marvell_nand.c driver first look at the number of CS lines that are present in this property. Better use of_property_count_elems_of_size() than dividing by 4 the size of the number of bytes returned by of_get_property(). Fixes: 02f26ecf ("mtd: nand: add reworked Marvell NAND controller driver") Cc: stable@vger.kernel.org Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com> Tested-by: NChris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>
-
- 26 4月, 2018 18 次提交
-
-
由 Ilya Dryomov 提交于
ceph_con_workfn() validates con->state before calling try_read() and then try_write(). However, try_read() temporarily releases con->mutex, notably in process_message() and ceph_con_in_msg_alloc(), opening the window for ceph_con_close() to sneak in, close the connection and release con->sock. When try_write() is called on the assumption that con->state is still valid (i.e. not STANDBY or CLOSED), a NULL sock gets passed to the networking stack: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: selinux_socket_sendmsg+0x5/0x20 Make sure con->state is valid at the top of try_write() and add an explicit BUG_ON for this, similar to try_read(). Cc: stable@vger.kernel.org Link: https://tracker.ceph.com/issues/23706Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Reviewed-by: NJason Dillaman <dillaman@redhat.com>
-
由 Linus Walleij 提交于
This updates the Gemini defconfig with a config that will bring up most of the recently merged and updated devices to some functional level: - We enable high resolution timers (the right thing to do) - Enable CMA for the framebuffer, and the new TVE200 framebuffer driver and the Ilitek ILI9322 driver for graphics on the D-Link DIR-685. HIGHMEM support comes in as part of this. - Enable networking and the new Cortina Gemini ethernet driver. - Enable MDIO over GPIO and the Realtek PHY devices used on several of these systems. - Enable I2C over GPIO and SPI over GPIO which is used on several of these devices. - Enable the Thermal framework, GPIO fan control and LM75 sensor adding cooling on the D-Link DNS-313 with no userspace involved even if only the kernel is working, rock solid thermal for this platform. - Enable JEDEC flash probing to support the Eon flash chip in D-Link DNS-313. - Enable LED disk triggers for the NAS type devices. Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Linus Walleij 提交于
One of the bitbanged SPI hosts had wrongly named GPIO lines due to sloppiness by yours truly. Cc: arm@kernel.org Cc: Mark Brown <broonie@kernel.org> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Arnd Bergmann 提交于
Merge tag 'omap-for-v4.17/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Pull "Two fixes for v4.17-rc cycle" from Tony Lindgren: Fix a build regression with split object directories reported by Russell and fix range sizes for omap4 cm2 and prm modules. * tag 'omap-for-v4.17/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Fix build when using split object directories ARM: dts: Fix cm2 and prm sizes for omap4
-
由 John Garry 提交于
For ACPI support of the HiSilicon LPC driver we depend on MFD_CORE config. Currently the HiSi LPC Kconfig entry does not define this dependency, so add it. The reason for depending on MFD_CORE in the driver is that we model the LPC host as an MFD, in that a platform device will be created for each device on the bus. We do this as we need to modify the resources of these derived platform devices, something which we should not do to the original devices created in the ACPI scan. Details in e0aa1563 ("HISI LPC: Add ACPI support"). Fixes: e0aa1563 ("HISI LPC: Add ACPI support") Reported-and-tested-by: NTan Xiaojun <tanxiaojun@huawei.com> Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Arnd Bergmann 提交于
Merge tag 'amlogic-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into fixes Pull "Amlogic fixes for v4.17-rc1" from Kevin Hilman: - add / enable USB host support for GX boards * tag 'amlogic-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM64: dts: meson-gxm-khadas-vim2: enable the USB controller ARM64: dts: meson-gxl-nexbox-a95x: enable the USB controller ARM64: dts: meson-gxl-s905x-libretech-cc: enable the USB controller ARM64: dts: meson-gx-p23x-q20x: enable the USB controller ARM64: dts: meson-gxl-s905x-p212: enable the USB controller ARM64: dts: meson-gxm: add GXM specific USB host configuration ARM64: dts: meson-gxl: add USB host support
-
由 Linus Walleij 提交于
The DTS file for the NAS4220B had the pin config for the ethernet interface set to the pins in the SL3512 SoC while this system is using SL3516. Fix it by referencing the right SL3516 pins instead of the SL3512 pins. Cc: stable@vger.kernel.org Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Reported-by: NAndreas Fiedler <andreas.fiedler@gmx.net> Reported-by: NRoman Yeryomin <roman@advem.lv> Tested-by: NRoman Yeryomin <roman@advem.lv> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Niklas Cassel 提交于
I am leaving Axis, so this address will bounce in the not too distant future. Fortunately, I will still be working with the community. Signed-off-by: NNiklas Cassel <niklas.cassel@axis.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Arnd Bergmann 提交于
Merge tag 'scmi-fixes-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into fixes SCMI fix for v4.17 A single patch eliminating the redundant null pointer check detected by CoverityScan("Array compared against 0") * tag 'scmi-fixes-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: remove redundant null check on array
-
由 Arnd Bergmann 提交于
Merge tag 'juno-fixes-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into fixes Pull "ARMv8 Juno DT fix for v4.17" from Sudeep Holla: A single patch to fix the new DTC warnings probably enabled during v4.17 merge window. * tag 'juno-fixes-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: arm64: dts: juno: drop unnecessary address-cells and size-cells properties
-
https://github.com/Broadcom/stblinux由 Arnd Bergmann 提交于
This pull request contains Broadcom SoCs drivers fixes, please pull the following: - Geert makes the Raspberry Pi firmwware return -ENOSYS (similar to other subsystems) when CONFIG_RASPBERRYPI_FIRMWARE is off. - Florian fixes an incorrect annotation in the Raspberry Pi power domain driver, spotted by sparse * tag 'arm-soc/for-4.17/drivers-fixes' of https://github.com/Broadcom/stblinux: soc: bcm2835: Make !RASPBERRYPI_FIRMWARE dummies return failure soc: bcm: raspberrypi-power: Fix use of __packed
-
由 Arnd Bergmann 提交于
Merge tag 'socfpga_defconfig_fix_v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into fixes ARM: socfpga_defconfig: fix QSPI Sector 4k - disable CONFIG_MTD_SPI_NOR_USE_4K_SECTORS * tag 'socfpga_defconfig_fix_v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: socfpga_defconfig: Remove QSPI Sector 4K size force
-
由 Takashi Sakamoto 提交于
In error path of snd_dice_stream_init_duplex(), stream data for incoming packet can be left to be initialized. This commit fixes it. Fixes: 436b5abe ('ALSA: dice: handle whole available isochronous streams') Cc: <stable@vger.kernel.org> # v4.6+ Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Rafael J. Wysocki 提交于
* acpi-watchdog: ACPI / watchdog: Prefer iTCO_wdt on Lenovo Z50-70 * acpi-button: ACPI / button: make module loadable when booted in non-ACPI mode * acpi-video: ACPI / video: Only default only_lcd to true on Win8-ready _desktops_
-
由 Rafael J. Wysocki 提交于
* acpi-pm: ACPI / PM: Blacklist Low Power S0 Idle _DSM for ThinkPad X1 Tablet(2016) * pm-cpufreq: cpufreq: brcmstb-avs-cpufreq: remove development debug support
-
由 Geert Uytterhoeven 提交于
The driver_override implementation is susceptible to a race condition when different threads are reading vs storing a different driver override. Add locking to avoid this race condition. Cfr. commits 62655397 ("driver core: platform: fix race condition with driver_override") and 9561475d ("PCI: Fix race condition with driver_override"). Fixes: 3cf38571 ("ARM: 8256/1: driver coamba: add device binding path 'driver_override'") Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: NTodd Kjos <tkjos@google.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Geert Uytterhoeven 提交于
For AMBA devices with unconfigured driver override, the "driver_override" sysfs virtual file is empty, while it contains "(null)" for platform and PCI devices. Make AMBA consistent with other buses by dropping the test for a NULL pointer. Note that contrary to popular belief, sprintf() handles NULL pointers fine; they are printed as "(null)". Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Cc: stable <stable@vger.kernel.org> Reviewed-by: NTodd Kjos <tkjos@google.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
This reverts commit 6b614a87. My backport was incorrect, as Geert pointed out :( Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: Todd Kjos <tkjos@google.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-