[ Upstream commit d3ad430ac531e65f29c9737f86744c425c9173ef ]

The PFC enabling is based on user priority, currently it is
based on TC, which may cause PFC not setting correctly when pri
to TC mapping is not one to one relation.

This patch adds pfc_en in tm_info to fix it.

Fixes: cacde272 ("net: hns3: Add hclge_dcb module for the support of DCB feature")
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 4a402f47cfce904051cd8b31bef4fe2910d9dce9 ]

According to firmware error code definition, the error code of 2
means NOT_SUPPORTED, this patch changes it to NOT_SUPPORTED.
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c53336c8f5f29043fded57912cc06c24e12613d7 ]

Logical block size is the lowest possible block size that the storage
device can address. Max segment size is often related with controller's
DMA capability. And it is reasonable to align max segment size with
logical block size.

SDHCI sets un-aligned max segment size, and causes ADMA error, so
fix it by aligning max segment size with logical block size.
Reported-by: NNaresh Kamboju <naresh.kamboju@linaro.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Faiz Abbas <faiz_abbas@ti.com>
Cc: linux-block@vger.kernel.org
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a7603ac1fc8ce1409f8ff70e6ce505f308b2c002 ]

Due to the depends on NET_UDP_TUNNEL, at the moment it is impossible to
compile GENEVE if no other protocol depending on NET_UDP_TUNNEL is
selected.

Fix this changing the depends to a select, and drop NET_IP_TUNNEL from the
select list, as it already depends on NET_UDP_TUNNEL.
Signed-off-by: NMatteo Croce <mcroce@redhat.com>
Reviewed-and-tested-by: NAndrea Claudi <aclaudi@redhat.com>
Tested-by: NDavide Caratti <dcaratti@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c65285428b6e7797f1bb063f33b0ae7e93397b7b ]

The bitmap of found partitions in efx_ef10_mtd_probe was not
initialised, causing partitions to be suppressed based off whatever
value was in the bitmap at the start.

Fixes: 3366463513f5 ("sfc: suppress duplicate nvmem partition types in efx_ef10_mtd_probe")
Signed-off-by: NBert Kenward <bkenward@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 3366463513f544c12c6b88c13da4462ee9e7a1a1 ]

Use a bitmap to keep track of which partition types we've already seen;
 for duplicates, return -EEXIST from efx_ef10_mtd_probe_partition() and
 thus skip adding that partition.
Duplicate partitions occur because of the A/B backup scheme used by newer
 sfc NICs.  Prior to this patch they cause sysfs_warn_dup errors because
 they have the same name, causing us not to expose any MTDs at all.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit eb0200a4357da100064971689d3a0e9e3cf57f33 ]

On a NOP double buffer update where current buffer address is the same
as the next buffer address, the SDW_UPDATE bit clears too late. As we
are now using this bit to determine when it is safe to signal flip
completion to userspace this will delay completion of atomic commits
where one plane doesn't change the buffer by a whole frame period.

Fix this by remembering the last buffer address and just skip the
double buffer update if it would not change the buffer address.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
[p.zabel@pengutronix.de: initialize last_bufaddr in ipu_pre_configure]
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 352c4cf40c4a7d439fa5d30aa2160f54b394da82 ]

The initialization code of interrupt backoff work might reference NULL
pointer and cause the following crash, if no port was found.

[   10.017727] CPU 0 Unable to handle kernel paging request at virtual address 000001b0, epc == 807088e0, ra == 8070863c
---- snip ----
[   11.704470] [<807088e0>] serial8250_register_8250_port+0x318/0x4ac
[   11.747251] [<80708d74>] serial8250_probe+0x148/0x1c0
[   11.789301] [<80728450>] platform_drv_probe+0x40/0x94
[   11.830515] [<807264f8>] really_probe+0xf8/0x318
[   11.870876] [<80726b7c>] __driver_attach+0x110/0x12c
[   11.910960] [<80724374>] bus_for_each_dev+0x78/0xcc
[   11.951134] [<80725958>] bus_add_driver+0x200/0x234
[   11.989756] [<807273d8>] driver_register+0x84/0x148
[   12.029832] [<80d72f84>] serial8250_init+0x138/0x198
[   12.070447] [<80100e6c>] do_one_initcall+0x5c/0x2a0
[   12.110104] [<80d3a208>] kernel_init_freeable+0x370/0x484
[   12.150722] [<80a49420>] kernel_init+0x10/0xf8
[   12.191517] [<8010756c>] ret_from_kernel_thread+0x14/0x1c

This patch makes sure the initialization code can be reached only if a port
is found.

Fixes: 6d7f677a2afa ("serial: 8250: Rate limit serial port rx interrupts during input overruns")
Signed-off-by: NHe Zhe <zhe.he@windriver.com>
Reviewed-by: NDarwin Dingel <darwin.dingel@alliedtelesis.co.nz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 77f88abd4a6f73a1a68dbdc0e3f21575fd508fc3 ]

The API of pci_alloc_irq_vectors_affinity() says it returns -ENOSPC if
fewer than @min_vecs interrupt vectors are available for @dev.

However, if a device supports MSI-X but not MSI and a caller requests
@min_vecs that can't be satisfied by MSI-X, we previously returned -EINVAL
(from the failed attempt to enable MSI), not -ENOSPC.

When -ENOSPC is returned, callers may reduce the number IRQs they request
and try again.  Most callers can use the @min_vecs and @max_vecs
parameters to avoid this retry loop, but that doesn't work when using IRQ
affinity "nr_sets" because rebalancing the sets is driver-specific.

This return value bug has been present since pci_alloc_irq_vectors() was
added in v4.10 by aff17164 ("PCI: Provide sensible IRQ vector
alloc/free routines"), but it wasn't an issue because @min_vecs/@max_vecs
removed the need for callers to iteratively reduce the number of IRQs
requested and retry the allocation, so they didn't need to distinguish
-ENOSPC from -EINVAL.

In v5.0, 6da4b3ab9a6e ("genirq/affinity: Add support for allocating
interrupt sets") added IRQ sets to the interface, which reintroduced the
need to check for -ENOSPC and possibly reduce the number of IRQs requested
and retry the allocation.
Signed-off-by: NMing Lei <ming.lei@redhat.com>
[bhelgaas: changelog]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 96dbcb40e4b1a387cdb9b21f43638c759aebb5a4 ]

At the beginning, only Armada 38x SoCs where supported by the
ahci_mvebu.c driver. Commit 15d3ce7b ("ata: ahci_mvebu: add
support for Armada 3700 variant") introduced Armada 3700 support. As
opposed to Armada 38x SoCs, the 3700 variants do not have to configure
mbus and the regret option. This patch took care of avoiding such
configuration when not needed in the probe function, but failed to do
the same in the resume path. While doing so looks harmless by
experience, let's clean the driver logic and avoid doing this useless
configuration with Armada 3700 SoCs.

Because the logic is very similar between these two places, it has
been decided to factorize this code and put it in a "Armada 38x
configuration function". This function is part of a new
(per-compatible) platform data structure, so that the addition of such
configuration function for Armada 3700 will be eased.

Fixes: 15d3ce7b ("ata: ahci_mvebu: add support for Armada 3700 variant")
Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2b6f0090a3335b7bdd03ca520c35591159463041 ]

add_mtd_device() can fail. We should always check its return value
and gracefully handle the failure case. Fix the call sites where this
not done (in mtdpart.c) and add a __must_check attribute to the
prototype to avoid this kind of mistakes.
Signed-off-by: NBoris Brezillon <bbrezillon@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 967d3010df8b6f6f9aa95c198edc5fe3646ebf36 ]

unreferenced object 0xffff808ec6dc5a80 (size 128):
  comm "swapper/0", pid 1, jiffies 4294938063 (age 2560.530s)
  hex dump (first 32 bytes):
    ff ff ff ff 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b  ........kkkkkkkk
    6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
  backtrace:
    [<00000000476dcf8c>] kmem_cache_alloc_trace+0x430/0x500
    [<000000004f708d37>] platform_device_register_full+0xbc/0x1e8
    [<000000006c2a7ec7>] acpi_create_platform_device+0x370/0x450
    [<00000000ef135642>] acpi_default_enumeration+0x34/0x78
    [<000000003bd9a052>] acpi_bus_attach+0x2dc/0x3e0
    [<000000003cf4f7f2>] acpi_bus_attach+0x108/0x3e0
    [<000000003cf4f7f2>] acpi_bus_attach+0x108/0x3e0
    [<000000002968643e>] acpi_bus_scan+0xb0/0x110
    [<0000000010dd0bd7>] acpi_scan_init+0x1a8/0x410
    [<00000000965b3c5a>] acpi_init+0x408/0x49c
    [<00000000ed4b9fe2>] do_one_initcall+0x178/0x7f4
    [<00000000a5ac5a74>] kernel_init_freeable+0x9d4/0xa9c
    [<0000000070ea6c15>] kernel_init+0x18/0x138
    [<00000000fb8fff06>] ret_from_fork+0x10/0x1c
    [<0000000041273a0d>] 0xffffffffffffffff

Then, faddr2line pointed out this line,

/*
 * This memory isn't freed when the device is put,
 * I don't have a nice idea for that though.  Conceptually
 * dma_mask in struct device should not be a pointer.
 * See http://thread.gmane.org/gmane.linux.kernel.pci/9081
 */
pdev->dev.dma_mask =
	kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);

Since this leak has existed for more than 8 years and it does not
reference other parts of the memory, let kmemleak ignore it, so users
don't need to waste time reporting this in the future.

Link: http://lkml.kernel.org/r/20181206160751.36211-1-cai@gmx.usSigned-off-by: NQian Cai <cai@gmx.us>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit acafce48b07bf5f9994a38e7fe237193d43d092e ]

It turns out the dt-probing part of this wasn't tested properly after it
was merged. commit 3aa0582f ("of: platform: populate /firmware/ node
from of_platform_default_populate_init()") changed the core-code to
generate the platform devices, meaning the driver's attempt fails, and it
bails out.

Fix this by removing the manual platform-device creation for DT systems,
core code has always done this for us.

CC: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: NJames Morse <james.morse@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c3790b3799f8d75d93d26f6fd7bb569fc8c8b0cb ]

After finding a "firmware" dt node arm_sdei tries to match it's
compatible string with it. To do so it's calling of_find_matching_node()
which already takes care of decreasing the refcount on the "firmware"
node. We are then incorrectly decreasing the refcount on that node
again.

This patch removes the unwarranted call to of_node_put().
Signed-off-by: NNicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: NJames Morse <james.morse@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 9c6260de505b63638dd86fcc33849b17f6146d94 ]

idr_find() may fail and return a NULL pointer. The fix checks the return
value of the function and returns an error in case of NULL.
Signed-off-by: NAditya Pakki <pakki001@umn.edu>
Acked-by: NMichal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 94edd87a1c59f3efa6fdf4e98d6d492e6cec6173 ]

In bnxt_qplib_map_tc2cos(), bnxt_qplib_rcfw_send_message() can return an
error value but it is lost. Propagate this error to the callers.
Signed-off-by: NAditya Pakki <pakki001@umn.edu>
Acked-By: NDevesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 40752b3eae29f8ca2378e978a02bd6dbeeb06d16 ]

This patch fixes potential double frees if register_hdlc_device() fails.
Signed-off-by: NWen Yang <wen.yang99@zte.com.cn>
Reviewed-by: NPeng Hao <peng.hao2@zte.com.cn>
CC: Zhao Qiang <qiang.zhao@nxp.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: netdev@vger.kernel.org
CC: linuxppc-dev@lists.ozlabs.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 92ee77d148bf06d8c52664be4d1b862583fd5c0e ]

When acpi_match_device fails, its return value is NULL. Directly using
the return value without a check may result in a NULL-pointer
dereference. The fix checks if acpi_match_device fails, and if so,
returns -EINVAL.
Signed-off-by: NKangjie Lu <kjlu@umn.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ff07d48d7bc0974d4f96a85a4df14564fb09f1ef ]

atl1e_write_phy_reg() could fail. The fix issues an error message when
it fails.
Signed-off-by: NKangjie Lu <kjlu@umn.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e49505f7255be8ced695919c08a29bf2c3d79616 ]

Both bcm_sf2_sw_indir_rw and mdiobus_write_nested could fail, so let's
return their error codes upstream.
Signed-off-by: NKangjie Lu <kjlu@umn.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f86a3b83833e7cfe558ca4d70b64ebc48903efec ]

clk_prepare() could fail, so let's check its status, and if it fails,
return its error code upstream.
Signed-off-by: NKangjie Lu <kjlu@umn.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2d822f2dbab7f4c820f72eb8570aacf3f35855bd ]

clk_prepare() could fail, so let's check its status, and if it fails,
return its error code upstream.
Signed-off-by: NKangjie Lu <kjlu@umn.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b0f17570b8203c22f139459c86cfbaa0311313ed ]

Commit e39c0df1 ("pwm: Introduce the pwm_args concept") has
changed the variable for the period for clps711x-pwm driver, so now
pwm_get/set_period() works with pwm->state.period variable instead
of pwm->args.period.
This patch changes the period variable in other places where it is used.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NThierry Reding <thierry.reding@gmail.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2326828ee40357b3d2b1359b8ca7526af201495b ]

The following build warnings are seen when building for ARM64 allmodconfig:

drivers/crypto/mxc-scc.c:181:20: warning: format '%d' expects argument of type 'int', but argument 5 has type 'size_t' {aka 'long unsigned int'} [-Wformat=]
drivers/crypto/mxc-scc.c:186:21: warning: format '%d' expects argument of type 'int', but argument 4 has type 'size_t' {aka 'long unsigned int'} [-Wformat=]
drivers/crypto/mxc-scc.c:277:21: warning: format '%d' expects argument of type 'int', but argument 4 has type 'size_t' {aka 'long unsigned int'} [-Wformat=]
drivers/crypto/mxc-scc.c:339:3: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
drivers/crypto/mxc-scc.c:340:3: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]

Fix them by using the %zu specifier to print a size_t variable and using
a plain %x to print the result of a readl().
Signed-off-by: NFabio Estevam <festevam@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit cd07e3701fa6a4c68f8493ee1d12caa18d46ec6a ]

tps65910_reg_set_bits() may fail. The fix checks if it fails, and if so,
returns with its error code.
Signed-off-by: NKangjie Lu <kjlu@umn.edu>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d5108e69fe013ff47ab815b849caba9cc33ca1e5 ]

Current rxe device counters are not thread safe.
When multiple QPs are used, they can be racy.
Make them thread safe by making it atomic64.

Fixes: 0b1e5b99 ("IB/rxe: Add port protocol stats")
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2c38f035117331eb78d0504843c79ea7c7fabf37 ]

print_st_err() is defined with its 4th argument taking an
'enum drbd_state_rv' but its prototype use an int for it.

Fix this by using 'enum drbd_state_rv' in the prototype too.
Signed-off-by: NLuc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: NRoland Kammerer <roland.kammerer@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f708bd08ecbdc23d03aaedf5b3311ebe44cfdb50 ]

"suspending" IO is overloaded.
It can mean "do not allow new requests" (obviously),
but it also may mean "must not complete pending IO",
for example while the fencing handlers do their arbitration.

When adjusting disk options, we suspend io (disallow new requests), then
wait for the activity-log to become unused (drain all IO completions),
and possibly replace it with a new activity log of different size.

If the other "suspend IO" aspect is active, pending IO completions won't
happen, and we would block forever (unkillable drbdsetup process).

Fix this by skipping the activity log adjustment if the "al-extents"
setting did not change. Also, in case it did change, fail early without
blocking if it looks like we would block forever.
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit fe43ed97bba3b11521abd934b83ed93143470e4f ]

Multiple failure scenario:
a) all good
   Connected Primary/Secondary UpToDate/UpToDate
b) lose disk on Primary,
   Connected Primary/Secondary Diskless/UpToDate
c) continue to write to the device,
   changes only make it to the Secondary storage.
d) lose disk on Secondary,
   Connected Primary/Secondary Diskless/Diskless
e) now try to re-attach on Primary

This would have succeeded before, even though that is clearly the
wrong data set to attach to (missing the modifications from c).
Because we only compared our "effective" and the "to-be-attached"
data generation uuid tags if (device->state.conn < C_CONNECTED).

Fix: change that constraint to (device->state.pdsk != D_UP_TO_DATE)
compare the uuids, and reject the attach.

This patch also tries to improve the reverse scenario:
first lose Secondary, then Primary disk,
then try to attach the disk on Secondary.

Before this patch, the attach on the Secondary succeeds, but since commit
drbd: disconnect, if the wrong UUIDs are attached on a connected peer
the Primary will notice unsuitable data, and drop the connection hard.

Though unfortunately at a point in time during the handshake where
we cannot easily abort the attach on the peer without more
refactoring of the handshake.

We now reject any attach to "unsuitable" uuids,
as long as we can see a Primary role,
unless we already have access to "good" data.
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 94c43a13b8d6e3e0dd77b3536b5e04a84936b762 ]

During handshake, if we are diskless ourselves, we used to accept any size
presented by the peer.

Which could be zero if that peer was just brought up and connected
to us without having a disk attached first, in which case both
peers would just "flip" their volume sizes.

Now, even a diskless node will ignore "zero" sizes
presented by a diskless peer.

Also a currently Diskless Primary will refuse to shrink during handshake:
it may be frozen, and waiting for a "suitable" local disk or peer to
re-appear (on-no-data-accessible suspend-io). If the peer is smaller
than what we used to be, it is not suitable.

The logic for a diskless node during handshake is now supposed to be:
believe the peer, if
 - I don't have a current size myself
 - we agree on the size anyways
 - I do have a current size, am Secondary, and he has the only disk
 - I do have a current size, am Primary, and he has the only disk,
   which is larger than my current size
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 517ad4ae8aa93dccdb9a88c27257ecb421c9e848 ]

As a part of cleanup, the SPAPR TCE IOMMU subdriver releases preregistered
memory. If there is a bug in memory release, the loop in
tce_iommu_release() becomes infinite; this actually happened to me.

This makes the loop finite and prints a warning on every failure to make
the code more bug prone.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Acked-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 5803c12816c43bd09e5f4247dd9313c2d9a2c41b ]

When ath6kl was reworked to share code between regular and scheduled scans
in commit 3b8ffc6a ("ath6kl: Configure probed SSID list consistently"),
probed SSID entry changed from 1-index to 0-indexed. However,
ath6kl_cfg80211_scan_complete_event() was missed in that change. Fix its
indexing so that we correctly clear out the probed SSID list.
Signed-off-by: NKyle Roeschley <kyle.roeschley@ni.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit fb376a495fbdb886f38cfaf5a3805401b9e46f13 ]

Commit dd45b759 ("ath6kl: Include match ssid list in scheduled scan")
merged the probed and matched SSID lists before sending them to the
firmware. In the process, it assumed match set support is always available
in ath6kl_set_probed_ssids, which breaks scans for hidden SSIDs. Now, check
that the firmware supports matching SSIDs in scheduled scans before setting
MATCH_SSID_FLAG.

Fixes: dd45b759 ("ath6kl: Include match ssid list in scheduled scan")
Signed-off-by: NKyle Roeschley <kyle.roeschley@ni.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 861cb5eb467f5e38dce1aabe4e8db379255bd89b ]

Since commit 1204aa17 ("brcmfmac: set WIPHY_FLAG_HAVE_AP_SME flag")
the Raspberry Pi 3 A+ (BCM43455) isn't able to operate in AP mode with
hostapd (device_ap_sme=1 use_monitor=0):

brcmfmac: brcmf_cfg80211_stop_ap: setting AP mode failed -52

So add the missing mgmt_stypes for AP mode to fix this.

Fixes: 1204aa17 ("brcmfmac: set WIPHY_FLAG_HAVE_AP_SME flag")
Suggested-by: NArend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: NStefan Wahren <stefan.wahren@i2se.com>
Acked-by: NArend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 9934613edcb40b92a216122876cd3b7e76d08390 ]

In case of ->vport_create() call scsi_add_host_with_dma() instead of
scsi_add_host() to pass correct dma device.
Signed-off-by: NVarun Prakash <varun@chelsio.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 17b18eaa6f59044a5172db7d07149e31ede0f920 ]

The intent of invoking configfs_depend_item in commit 7474f52a
("tcm_qla2xxx: Perform configfs depend/undepend for base_tpg")
was to prevent a physical Fibre Channel port removal when
virtual (NPIV) ports announced through that physical port are active.
The change does not work as expected: it makes enabled physical port
dependent on target configfs subsystem (the port's parent), something
the configfs guarantees anyway.

Besides, scheduling work in a worker thread and waiting for the work's
completion is not really a valid workaround for the requirement not to call
configfs_depend_item from a configfs callback: the call occasionally
deadlocks.

Thus, removing configfs_depend_item calls does not break anything and fixes
the deadlock problem.
Signed-off-by: NAnatoliy Glagolev <glagolig@gmail.com>
Acked-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2ee00f6a98c36f7e4ba07cc33f24cc5a69060cc9 ]

This patch avoids that the SCSI mid-layer keeps retrying forever if
ib_post_send() fails. This was discovered while testing immediate
data support and passing a too large num_sge value to ib_post_send().

Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a8da3c7873ea57acb8f9cea58c0af477522965aa ]

Function max310x_tx_empty() accesses the IRQSTS register, which is
cleared by IC when reading, so if there is an interrupt status, we
will lose it. This patch implement the transmitter check only by
the current FIFO level.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 22bba80500fdf624a7cfbb65fdfa97a038ae224d ]

The Broadcom controller on aries S5PV210 boards sends out a couple of
unknown packets after the firmware is loaded.  This will cause
logging of errors such as:
	Bluetooth: hci0: Frame reassembly failed (-84)

This is probably also the case with other boards, as there are related
Android userspace patches for custom ROMs such as
https://review.lineageos.org/#/c/LineageOS/android_system_bt/+/142721/
Since this appears to be intended behaviour, treated them as diagnostic
packets.

Note that this is another variant of commit 01d5e44a
("Bluetooth: hci_bcm: Handle empty packet after firmware loading")
Signed-off-by: NJonathan Bakker <xc-racer2@live.ca>
Signed-off-by: NPaweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 966e927bf8cc6a44f8b72582a1d6d3ffc73b12ad ]

If palmas_smps_read() fails, we should not use the read data in "reg"
which may contain random value. The fix inserts a check for the return
value of palmas_smps_read(): If it fails, we return the error code
upstream and stop using "reg".
Signed-off-by: NKangjie Lu <kjlu@umn.edu>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>