CodingStyle fix: don't use parenthesis on return, as it is not
a function.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Using return and goto inside macros is ugly and makes harder to
understand the code and the labels. Remove those macros, and add
a proper error debug message, when something bad happens.

This was generated using the following coccinelle script:

@@
@@
-DUMMY_READ();
+do {
+	u16 dummy;
+	RR16(demod->my_i2c_dev_addr, SCU_RAM_VERSION_HI__A, &dummy);
+} while (0);

@@
expression dev, addr, val;
@@
-WR16(dev, addr, val)
+CHK_ERROR(DRXJ_DAP.write_reg16func(dev, addr, val, 0))

@@
expression dev, addr, val;
@@
-RR16(dev, addr, val)
+CHK_ERROR(DRXJ_DAP.read_reg16func(dev, addr, val, 0))

@@
expression dev, addr, val;
@@
-WR32(dev, addr, val)
+CHK_ERROR(DRXJ_DAP.write_reg32func(dev, addr, val, 0))

@@
expression dev, addr, val;
@@
-RR32(dev, addr, val)
+CHK_ERROR(DRXJ_DAP.read_reg32func(dev, addr, val, 0))

@@
expression dev, addr, val, block;
@@
-WRB(dev, addr, val, block)
+CHK_ERROR(DRXJ_DAP.write_block_func(dev, addr, val, block, 0))

@@
expression dev, addr, val, block;
@@
-RRB(dev, addr, val, block)
+CHK_ERROR(DRXJ_DAP.read_block_func(dev, addr, val, block, 0))

@@
expression dev, addr, val;
@@
-BCWR16(dev, addr, val)
+CHK_ERROR(DRXJ_DAP.write_reg16func(dev, addr, val, DRXDAP_FASI_BROADCAST))

@@
expression dev, addr, val;
@@
-ARR32(dev, addr, val)
+CHK_ERROR(drxj_dap_atomic_read_reg32(dev, addr, val, 0))

@@
expression dev, addr, val;
@@
-SARR16(dev, addr, val)
+CHK_ERROR(drxj_dap_scu_atomic_read_reg16(dev, addr, val, 0))

@@
expression x;
@@
-CHK_ERROR(x);
+rc = x;
+if (rc != DRX_STS_OK) {
+	pr_err("error %d\n", rc);
+	goto rw_error;
+}
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

drivers/media/dvb-frontends/drx39xyj/drxj.c: In function ‘drxj_dap_scu_atomic_read_reg16’:
drivers/media/dvb-frontends/drx39xyj/drxj.c:4170:9: warning: ‘*((void *)&buf+1)’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  word = (u16) (buf[0] + (buf[1] << 8));
         ^
drivers/media/dvb-frontends/drx39xyj/drxj.c:4170:9: warning: ‘buf’ may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/media/dvb-frontends/drx39xyj/drxj.c: In function ‘drxj_dap_atomic_read_reg32.isra.59’:
drivers/media/dvb-frontends/drx39xyj/drxj.c:2186:7: warning: ‘*((void *)&buf+3)’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  word = (u32) buf[3];
       ^
drivers/media/dvb-frontends/drx39xyj/drxj.c:2188:10: warning: ‘*((void *)&buf+2)’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  word |= (u32) buf[2];
          ^
drivers/media/dvb-frontends/drx39xyj/drxj.c:2190:10: warning: ‘*((void *)&buf+1)’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  word |= (u32) buf[1];
          ^
drivers/media/dvb-frontends/drx39xyj/drxj.c:2192:10: warning: ‘buf’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  word |= (u32) buf[0];
          ^
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Some whitespace cleanups.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This were fixed with the help of this small perl script:

	#!/usr/bin/perl
	my $dir = shift or die "need a dir";
	my $type = shift or die "need type";
	my $var = shift or die "need var";
	sub handle_file {
		my $file = shift;
		my $out;
		open IN, $file or die "can't open $file";
		$out .= $_ while (<IN>);
		close IN;
		$out =~ s/\btypedef\s+($type)\s+\{([\d\D]+?)\s*\}\s+\b($var)[^\;]+\;/$type $var \{\2\};/;
		$out =~ s,\b($var)_t\s+,$type \1 ,g;
		$out =~ s,\bp_*($var)_t\s+,$type \1 *,g;
		$out =~ s,\b($var)_t\b,$type \1,g;
		$out =~ s,\bp_*($var)_t\b,$type \1 *,g;
		open OUT, ">$file" or die "can't open $file";
		print OUT $out;
		close OUT;
	}
	sub parse_dir {
		my $file = $File::Find::name;
		return if (!($file =~ /.[ch]$/));
		handle_file $file;
	}
	find({wanted => \&parse_dir, no_chdir => 1}, $dir);

Some manual work were needed.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Most of the changes were done with scripts like:
	for i in drivers/media/dvb-frontends/drx39xyj/*.[ch]; do perl -ne '$var = "drx_sig_quality"; s,\b($var)_t\s+,struct \1 ,g; s,\bp_*($var)_t\s+,struct \1 *,g; s,\b($var)_t\b,struct \1,g; s,\bp_*($var)_t\b,struct \1 *,g; print $_' <$i >a && mv a $i; done
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This file is not used anywhere. Drop it.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

drivers/media/dvb-frontends/drx39xyj/drx_driver.c:181:7: warning: no previous prototype for 'get_scan_context' [-Wmissing-prototypes]
 void *get_scan_context(pdrx_demod_instance_t demod, void *scan_context)

drivers/media/dvb-frontends/drx39xyj/drx_driver.c: At top level:
drivers/media/dvb-frontends/drx39xyj/drx_driver.c:842:5: warning: no previous prototype for 'ctrl_dump_registers' [-Wmissing-prototypes]
 int ctrl_dump_registers(pdrx_demod_instance_t demod,
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

No functional changes.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

None of those vars are used on those functions. Just remove them.

After this patch, there's just one of such warnings:

	drivers/media/dvb-frontends/drx39xyj/drxj.c: In function 'ctrl_get_qam_sig_quality':
	drivers/media/dvb-frontends/drx39xyj/drxj.c:7872:6: warning: variable 'ber_cnt' set but not used [-Wunused-but-set-variable]
	  u32 ber_cnt = 0; /* BER count */

We'll keep it, as BER count will be useful when converting the
frontend to report statistics via DVBv5 API
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This function is not static. Also, it is not used anywhere.
So, drop it.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This time, use checkpatch --strict --fix.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

There's no reason at all to use CamelCase here. Convert all of
them to normal case.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Instead of manually fixing the issues, use the --fix experimental
checkpatch. That solves a bunch of checkpatch issues.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Patch generated with this script:

for i in drivers/media/dvb-frontends/drx39xyj/*.[ch]; do perl -ne 's,(enum|struct|void|int|u32|u64|u16|u8|s8|s16|s32|s64)\s+(\S+)\s+\*[ ]+,\1 \2 *,g; print $_' <$i >a && mv a $i; done
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

There are lots of typedefs there. Let's get rid of them.

Most of the work here is due to this small script:

	if [ "$3" == "" ]; then
		echo "usage: $0 type DRXName drx_name"
	fi
	t=$1; f=$2; g=$3
	for i in *.[ch]; do
		sed s,"p${f}_t","$t $g *",g <$i >a && mv a $i && \
		sed s,"${f}_t","$t $g",g <$i >a && mv a $i
	done

Just kept there the function typedefs, as those are still useful.

Yet, all those tuner_ops can likely be just removed on a latter
cleanup patch.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Move them into drx_driver.h

That makes easier to cleanup further what's there at the
headers.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Most of the work were done by those small scripts:

for i in *; do sed s,pDRXFrequency_t,"s32 *",g <$i >a && mv a $i; done
for i in *; do sed s,DRXFrequency_t,"s32",g <$i >a && mv a $i; done
for i in *; do sed s,pDRXSymbolrate_t,"u32 *",g <$i >a && mv a $i; done
for i in *; do sed s,DRXSymbolrate_t,"u32",g <$i >a && mv a $i; done
for i in *; do sed s,FALSE,false,g <$i >a && mv a $i; done
for i in *; do sed s,TRUE,true,g <$i >a && mv a $i; done
for i in *; do sed s,Bool_t,bool,g <$i >a && mv a $i; done
for i in *; do sed s,pbool,"bool *",g <$i >a && mv a $i; done

The only remaining things there are the return values.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Patch created using this small script:

for j in 8 16 32; do for i in *; do sed s,pu${j}_t,"u$j *",g <$i >a && mv a $i; done; done
for j in 8 16 32; do for i in *; do sed s,ps${j}_t,"s$j *",g <$i >a && mv a $i; done; done
for j in 8 16 32; do for i in *; do sed s,s${j}_t,"s$j",g <$i >a && mv a $i; done; done
for j in 8 16 32; do for i in *; do sed s,u${j}_t,"u$j",g <$i >a && mv a $i; done; done

and fixing the bsp_types.h header.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

After removing the typedef, it is now clear that HICommand() were
abusing of a var that was expecting to be constant:

drivers/media/dvb-frontends/drx39xyj/drxj.c: In function ‘HICommand’:
drivers/media/dvb-frontends/drx39xyj/drxj.c:2272:3: warning: passing argument 1 of ‘drxDapDRXJFunct_g.writeReg16Func’ discards ‘const’ qualifier from pointer target type [enabled by default]
drivers/media/dvb-frontends/drx39xyj/drxj.c:2272:3: note: expected ‘struct i2c_device_addr *’ but argument is of type ‘const struct i2c_device_addr *’
drivers/media/dvb-frontends/drx39xyj/drxj.c:2273:3: warning: passing argument 1 of ‘drxDapDRXJFunct_g.writeReg16Func’ discards ‘const’ qualifier from pointer target type [enabled by default]
drivers/media/dvb-frontends/drx39xyj/drxj.c:2273:3: note: expected ‘struct i2c_device_addr *’ but argument is of type ‘const struct i2c_device_addr *’
drivers/media/dvb-frontends/drx39xyj/drxj.c:2274:3: warning: passing argument 1 of ‘drxDapDRXJFunct_g.writeReg16Func’ discards ‘const’ qualifier from pointer target type [enabled by default]
drivers/media/dvb-frontends/drx39xyj/drxj.c:2274:3: note: expected ‘struct i2c_device_addr *’ but argument is of type ‘const struct i2c_device_addr *’
drivers/media/dvb-frontends/drx39xyj/drxj.c:2275:3: warning: passing argument 1 of ‘drxDapDRXJFunct_g.writeReg16Func’ discards ‘const’ qualifier from pointer target type [enabled by default]
drivers/media/dvb-frontends/drx39xyj/drxj.c:2275:3: note: expected ‘struct i2c_device_addr *’ but argument is of type ‘const struct i2c_device_addr *’
drivers/media/dvb-frontends/drx39xyj/drxj.c:2278:3: warning: passing argument 1 of ‘drxDapDRXJFunct_g.writeReg16Func’ discards ‘const’ qualifier from pointer target type [enabled by default]
drivers/media/dvb-frontends/drx39xyj/drxj.c:2278:3: note: expected ‘struct i2c_device_addr *’ but argument is of type ‘const struct i2c_device_addr *’
drivers/media/dvb-frontends/drx39xyj/drxj.c:2279:3: warning: passing argument 1 of ‘drxDapDRXJFunct_g.writeReg16Func’ discards ‘const’ qualifier from pointer target type [enabled by default]
drivers/media/dvb-frontends/drx39xyj/drxj.c:2279:3: note: expected ‘struct i2c_device_addr *’ but argument is of type ‘const struct i2c_device_addr *’
drivers/media/dvb-frontends/drx39xyj/drxj.c:2291:2: warning: passing argument 1 of ‘drxDapDRXJFunct_g.writeReg16Func’ discards ‘const’ qualifier from pointer target type [enabled by default]
drivers/media/dvb-frontends/drx39xyj/drxj.c:2291:2: note: expected ‘struct i2c_device_addr *’ but argument is of type ‘const struct i2c_device_addr *’
drivers/media/dvb-frontends/drx39xyj/drxj.c:2311:4: warning: passing argument 1 of ‘drxDapDRXJFunct_g.readReg16Func’ discards ‘const’ qualifier from pointer target type [enabled by default]
drivers/media/dvb-frontends/drx39xyj/drxj.c:2311:4: note: expected ‘struct i2c_device_addr *’ but argument is of type ‘const struct i2c_device_addr *’
drivers/media/dvb-frontends/drx39xyj/drxj.c:2315:3: warning: passing argument 1 of ‘drxDapDRXJFunct_g.readReg16Func’ discards ‘const’ qualifier from pointer target type [enabled by default]
drivers/media/dvb-frontends/drx39xyj/drxj.c:2315:3: note: expected ‘struct i2c_device_addr *’ but argument is of type ‘const struct i2c_device_addr *’
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Most of the hard work here were done by this small script:

for i in *; do sed s,pI2CDeviceAddr_t,"struct i2c_device_addr *",g <$i >a && mv a $i; done
for i in *; do sed s,I2CDeviceAddr_t,"struct i2c_device_addr",g <$i >a && mv a $i; done

Only bsp_i2c.h were added by hand.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Make checkpatch.pl happy.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

There were some DVB internal API changes, since this driver were
written. Change it to work with the new API.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Do the automatic CodingStyle fixes found at Lindent.

No functional changes.
Acked-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Relicense the drx-j driver under a standard 3-clause BSD license, which makes
it GPL compatible.

This was done explicitly with permission from Trident Microsystems.
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add support for the Trident DRX-J driver, including a card profile for the
PCTV 80e which uses the chip.

Thanks to Trident for allowing the release of this code under a BSD license,
and of course Hauppauge/PCTV for pushing for its release to the community.

[pdickeybeta@gmail.com: modified to fix compilation errors and also to move
 the driver files from the drx39xy subdirectory to the frontends directory]

[m.chehab@samsung.com: fix merge conflicts, commented drx-j compilation and
 added EM28XX_R06_I2C_CLK setup also to the board setup]
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Those ioctls were added back in 2009, at changeset 1cb662a3
but were never documented. Fortunately, the original commit is
good enough to serve as the basis for documenting it. Also, the
support for it is done by dmxdev implementation.

So, add a proper documentation for it, based on the description
of the original changeset.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

If an attempt to set LNA fails, restore the cache to LNA_AUTO,
in order to make it to reflect the current LNA status.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

That helps to understand what's going there.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Several URBs will be simply not filled. Don't call the DVB
core software filter for those empty URBs.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Implement em28xx_usb_driver suspend, resume, and reset_resume hooks.
These hooks will invoke em28xx core em28xx_suspend_extension() and
em28xx_resume_extension() to suspend and resume registered extensions.

Approach:
Add power management support to em28xx usb driver. This driver works in
conjunction with extensions for each of the functions on the USB device
for video/audio/dvb/remote functionality that is present on media USB
devices it supports. During suspend and resume each of these extensions
will have to do their part in suspending the components they control.

Adding suspend and resume hooks to the existing struct em28xx_ops will
enable the extensions the ability to implement suspend and resume hooks
to be called from em28xx driver. The overall approach is as follows:

-- add suspend and resume hooks to em28xx_ops
-- add suspend and resume routines to em28xx-core to invoke suspend
   and resume hooks for all registered extensions.
-- change em28xx dvb, audio, input, and video extensions to implement
   em28xx_ops: suspend and resume hooks. These hooks do what is necessary
   to suspend and resume the devices they control.
Signed-off-by: NShuah Khan <shuah.kh@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Implement em28xx_ops: suspend/resume hooks. em28xx usb driver will
invoke em28xx_ops: suspend and resume hooks for all its extensions
from its suspend() and resume() interfaces.
Signed-off-by: NShuah Khan <shuah.kh@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Implement em28xx_ops: suspend/resume hooks. em28xx usb driver will
invoke em28xx_ops: suspend and resume hooks for all its extensions
from its suspend() and resume() interfaces.

[m.chehab@samsung.com: Fix a breakage caused by calling a non-existing
 function call: schedule_delayed_work_sync(), and test if IR was defined
 at suspend/resume]
Signed-off-by: NShuah Khan <shuah.kh@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Implement em28xx_ops: suspend/resume hooks. em28xx usb driver will
invoke em28xx_ops: suspend and resume hooks for all its extensions
from its suspend() and resume() interfaces.
Signed-off-by: NShuah Khan <shuah.kh@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Implement em28xx_ops: suspend/resume hooks. em28xx usb driver will
invoke em28xx_ops: suspend and resume hooks for all its extensions
from its suspend() and resume() interfaces.
Signed-off-by: NShuah Khan <shuah.kh@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

em28xx usb driver will have to suspend and resume its extensions. Adding
suspend and resume to em28xx_ops gives extensions the ability to install
suspend and resume that can be invoked from em28xx_usb driver suspend()
and resume() interfaces.

Approach:
Add power management support to em28xx usb driver. This driver works in
conjunction with extensions for each of the functions on the USB device
for video/audio/dvb/remote functionality that is present on media USB
devices it supports. During suspend and resume each of these extensions
will have to do their part in suspending the components they control.

Adding suspend and resume hooks to the existing struct em28xx_ops will
enable the extensions the ability to implement suspend and resume hooks
to be called from em28xx driver. The overall approach is as follows:

-- add suspend and resume hooks to em28xx_ops
-- add suspend and resume routines to em28xx-core to invoke suspend
   and resume hooks for all registered extensions.
-- change em28xx dvb, audio, input, and video extensions to implement
   em28xx_ops: suspend and resume hooks. These hooks do what is necessary
   to suspend and resume the devices they control.
Signed-off-by: NShuah Khan <shuah.kh@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Restructure the way we bring the various GPIOs out of reset.  In particular:

1.  we only need to setup the GPIOs as outputs once
2.  there's no point in writing 0x40 to register 0x00 since that's the EEPROM
    write protect and already it's configured as an input
3.  Separate out the act of enabling the power supply and bringing the tuner
    and demod out of reset.  If you don't then the chip may not be properly
    enabled (as the power supply is still ramping up when the chip comes
    out of reset).  This can result in probing failures.
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

An attempt was made to read dvbs2_snr_tab[80],
though dvbs2_snr_tab has only 80 elements.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

We are checking sizeof() the wrong variable!
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

No need to check lock twice here.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>