- 28 4月, 2007 1 次提交
-
-
由 Dmitriy Monakhov 提交于
Signed-off-by: NMonakhov Dmitriy <dmonakhov@openvz.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 26 4月, 2007 4 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
To clearly state the intent of copying to linear sk_buffs, _offset being a overly long variant but interesting for the sake of saving some bytes. Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
For the quite common 'skb->h.raw - skb->data' sequence. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
One less thing for drivers writers to worry about. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 2月, 2007 1 次提交
-
-
由 Stephen Hemminger 提交于
Nag message about planned sk98lin removal. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 05 12月, 2006 1 次提交
-
-
由 Mariusz Kozlowski 提交于
Fix parenthesis mismatch. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 04 12月, 2006 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 03 12月, 2006 1 次提交
-
-
由 Al Viro 提交于
... into anonymous union of __wsum and __u32 (csum and csum_offset resp.) Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 12月, 2006 2 次提交
-
-
由 Stephen Hemminger 提交于
Add MII ioctl support to the deprecated sk98lin driver. This allows comparison with skge driver's PHY settings. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
Add support for dumping the registers in the deprecated sk98lin driver. This is allows for easier comparison with settings in new skge driver. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 30 11月, 2006 1 次提交
-
-
由 Matt LaPlante 提交于
Fix various .c/.h typos in comments (no code changes). Signed-off-by: NMatt LaPlante <kernel1@cyberdogtech.com> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 05 10月, 2006 1 次提交
-
-
由 David Howells 提交于
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: NDavid Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
-
- 23 9月, 2006 1 次提交
-
-
由 Patrick McHardy 提交于
Replace CHECKSUM_HW by CHECKSUM_PARTIAL (for outgoing packets, whose checksum still needs to be completed) and CHECKSUM_COMPLETE (for incoming packets, device supplied full checksum). Patch originally from Herbert Xu, updated by myself for 2.6.18-rc3. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 9月, 2006 1 次提交
-
-
由 Jeff Garzik 提交于
Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 20 8月, 2006 1 次提交
-
-
由 Jeff Garzik 提交于
From: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: NMichal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 13 7月, 2006 1 次提交
-
-
由 Stephen Hemminger 提交于
Patch to correct broken collision threshold mask in (same problem as sky2 driver). Should be three bits wide, but the mask only allows for 1 bit to be set. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 03 7月, 2006 1 次提交
-
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 7月, 2006 1 次提交
-
-
由 Adrian Bunk 提交于
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 23 6月, 2006 1 次提交
-
-
由 Herbert Xu 提交于
First of all it is unnecessary to allocate a new skb in skb_pad since the existing one is not shared. More importantly, our hard_start_xmit interface does not allow a new skb to be allocated since that breaks requeueing. This patch uses pskb_expand_head to expand the existing skb and linearize it if needed. Actually, someone should sift through every instance of skb_pad on a non-linear skb as they do not fit the reasons why this was originally created. Incidentally, this fixes a minor bug when the skb is cloned (tcpdump, TCP, etc.). As it is skb_pad will simply write over a cloned skb. Because of the position of the write it is unlikely to cause problems but still it's best if we don't do it. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 3月, 2006 1 次提交
-
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 1月, 2006 1 次提交
-
-
由 Adrian Bunk 提交于
This patch contains the following possible cleanups: - make needlessly global functions static - remove unused code Signed-off-by: NAdrian Bunk <bunk@stusta.de> Cc: Stephen Hemminger <shemminger@osdl.org> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
- 10 1月, 2006 1 次提交
-
-
由 Adrian Bunk 提交于
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 09 1月, 2006 6 次提交
-
-
由 Stephen Hemminger 提交于
Don't enable the pci device twice (already done in the probe routine). Propogate the error codes from pci_request_region back to initial probing. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Stephen Hemminger 提交于
The sk98lin driver doesn't do proper error number handling during initialization. Note: -EAGAIN is a bogus return value for hardware errors. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Stephen Hemminger 提交于
Trivial use of kzalloc. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Stephen Hemminger 提交于
Sk98lin driver error recovery on two port boards is bad. If it fails the second allocation, it will not release resources properly. Also it registers the second port in the pci driver data If second port fails, might as well go with one port. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Stephen Hemminger 提交于
Sk98lin 64bit memory handling is wrong. It doesn't set the highdma flag; i.e. the kernel always does bounce buffers. It doesn't fallback to 32 bit mask if it can't get 64 bit mask. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Stephen Hemminger 提交于
Sk98lin driver has a routine marked __init that is called from the probe code. If using pci hotplug, this could be called after the initialization so it needs to be marked __devinit. So if you hot added a sk98lin board, the kernel would crash. I don't have hot plug hardware to actually try this feat. Also, there are two routines, only called from SkGeBoardInit that can be marked __devinit. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
- 04 1月, 2006 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
To help in reducing the number of include dependencies, several files were touched as they were getting needed headers indirectly for stuff they use. Thanks also to Alan Menegotto for pointing out that net/dccp/proto.c had linux/dccp.h include twice. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 12月, 2005 1 次提交
-
-
由 Stephen Hemminger 提交于
The checksum offsets for receive offload were not being set correctly. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
- 01 12月, 2005 6 次提交
-
-
由 shemminger@osdl.org 提交于
Remove device specific proc interface. It doesn't handle renames correctly; it ain't worth fixing. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 shemminger@osdl.org 提交于
Shrink size of per device data by removing redundant fields or things that are only used at boot up. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 shemminger@osdl.org 提交于
Allow control of checksumming parameters via ethtool. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 shemminger@osdl.org 提交于
Avoid possible confusion between skge and sk98lin driver by tagging messages properly. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 shemminger@osdl.org 提交于
Add permanent address and link status support via ethtool. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 shemminger@osdl.org 提交于
Remove code from sk98lin that does it's own checksum validation. This code is incorrect when dealing with nested protocols like VLAN's, and it is better to use regular receive code path to handle hardware checksum. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
- 17 11月, 2005 2 次提交
-
-
由 John W. Linville 提交于
Making SkPciWriteCfgDWord a static inline produces a warning due to a forward declaration in skdrv2nd.h. This patch removes that declaration. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Adrian Bunk 提交于
No external user and that small - such a function should be static inline and not a global function. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 09 11月, 2005 1 次提交
-
-
由 Olaf Hering 提交于
This patch removes almost all inclusions of linux/version.h. The 3 #defines are unused in most of the touched files. A few drivers use the simple KERNEL_VERSION(a,b,c) macro, which is unfortunatly in linux/version.h. There are also lots of #ifdef for long obsolete kernels, this was not touched. In a few places, the linux/version.h include was move to where the LINUX_VERSION_CODE was used. quilt vi `find * -type f -name "*.[ch]"|xargs grep -El '(UTS_RELEASE|LINUX_VERSION_CODE|KERNEL_VERSION|linux/version.h)'|grep -Ev '(/(boot|coda|drm)/|~$)'` search pattern: /UTS_RELEASE\|LINUX_VERSION_CODE\|KERNEL_VERSION\|linux\/\(utsname\|version\).h Signed-off-by: NOlaf Hering <olh@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-