- 05 6月, 2015 1 次提交
-
-
由 Majd Dibbiny 提交于
In ISSI > 0 mode, most of the MAD_IFC command features are deprecated, and can't be used. Therefore, when in that mode, we replace all of them with other commands that provide the required functionality. Signed-off-by: NMajd Dibbiny <majd@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 5月, 2015 1 次提交
-
-
由 Saeed Mahameed 提交于
- Query all supported types of dev caps on driver load. - Store the Cap data outbox per cap type into driver private data. - Introduce new Macros to access/dump stored caps (using the auto generated data types). - Obsolete SW representation of dev caps (no need for SW copy for each cap). - Modify IB driver to use new macros for checking caps. Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 4月, 2015 2 次提交
-
-
由 Saeed Mahameed 提交于
Preparation for ethernet driver. These functions will be used in drivers other than mlx5_ib. Signed-off-by: NAchiad Shochat <achiad@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Saeed Mahameed 提交于
Signed-off-by: NAchiad Shochat <achiad@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 12月, 2014 8 次提交
-
-
由 Haggai Eran 提交于
* Implement the relevant invalidation functions (zap MTTs as needed) * Implement interlocking (and rollback in the page fault handlers) for cases of a racing notifier and fault. * With this patch we can now enable the capability bits for supporting RC send/receive/RDMA read/RDMA write, and UD send. Signed-off-by: NSagi Grimberg <sagig@mellanox.com> Signed-off-by: NShachar Raindel <raindel@mellanox.com> Signed-off-by: NHaggai Eran <haggaie@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Haggai Eran 提交于
* Refactor MR registration and cleanup, and fix reg_pages accounting. * Create a work queue to handle page fault events in a kthread context. * Register a fault handler to get events from the core for each QP. The registered fault handler is empty in this patch, and only a later patch implements it. Signed-off-by: NSagi Grimberg <sagig@mellanox.com> Signed-off-by: NShachar Raindel <raindel@mellanox.com> Signed-off-by: NHaggai Eran <haggaie@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Haggai Eran 提交于
The new function allows updating the page tables of a memory region after it was created. This can be used to handle page faults and page invalidations. Since mlx5_ib_update_mtt will need to work from within page invalidation, so it must not block on memory allocation. It employs an atomic memory allocation mechanism that is used as a fallback when kmalloc(GFP_ATOMIC) fails. In order to reuse code from mlx5_ib_populate_pas, the patch splits this function and add the needed parameters. Signed-off-by: NHaggai Eran <haggaie@mellanox.com> Signed-off-by: NShachar Raindel <raindel@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Haggai Eran 提交于
This patch wraps together several changes needed for on-demand paging support in the mlx5_ib_populate_pas function, and when registering memory regions. * Instead of accepting a UMR bit telling the function to enable all access flags, the function now accepts the access flags themselves. * For on-demand paging memory regions, fill the memory tables from the correct list, and enable/disable the access flags per-page according to whether the page is present. * A new bit is set to enable writing of access flags when using the firmware create_mkey command. * Disable contig pages when on-demand paging is enabled. In addition the patch changes the UMR code to use PTR_ALIGN instead of our own macro. Signed-off-by: NHaggai Eran <haggaie@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Haggai Eran 提交于
The patch adds infrastructure to query ODP capabilities in the mlx5 driver. The code will read the capabilities from the device, and enable only those capabilities that both the driver and the device supports. At this point ODP is not supported, so no capability is copied from the device, but the patch exposes the global ODP device capability bit. Signed-off-by: NShachar Raindel <raindel@mellanox.com> Signed-off-by: NHaggai Eran <haggaie@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Haggai Eran 提交于
Add a helper function mlx5_ib_read_user_wqe to read information from user-space owned work queues. The function will be used in a later patch by the page-fault handling code in mlx5_ib. Signed-off-by: NHaggai Eran <haggaie@mellanox.com> [ Add stub for ib_umem_copy_from() for CONFIG_INFINIBAND_USER_MEM=n - Roland ] Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Haggai Eran 提交于
The current UMR interface doesn't allow partial updates to a memory region's page tables. This patch changes the interface to allow that. It also changes the way the UMR operation validates the memory region's state. When set, IB_SEND_UMR_FAIL_IF_FREE will cause the UMR operation to fail if the MKEY is in the free state. When it is unchecked the operation will check that it isn't in the free state. Signed-off-by: NHaggai Eran <haggaie@mellanox.com> Signed-off-by: NShachar Raindel <raindel@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Haggai Eran 提交于
Since UMR code now uses its own context struct on the stack, the pas and dma pointers for the UMR operation that remained in the mlx5_ib_mr struct are not necessary. This patch removes them. Fixes: a74d2416 ("IB/mlx5: Refactor UMR to have its own context struct") Signed-off-by: NHaggai Eran <haggaie@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 31 7月, 2014 2 次提交
-
-
由 Jack Morgenstein 提交于
There were many places where parameters which should be u8/u16 were integer type. Additionally, in 2 places, a check for a non-null pointer was added before dereferencing the pointer (this is actually a bug fix). Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jack Morgenstein 提交于
In preparation for a new mlx5 device which is VPI (i.e., ports can be either IB or ETH), move the pci device functionality from mlx5_ib to mlx5_core. This involves the following changes: 1. Move mlx5_core_dev struct out of mlx5_ib_dev. mlx5_core_dev is now an independent structure maintained by mlx5_core. mlx5_ib_dev now has a pointer to that struct. This requires changing a lot of places where the core_dev struct was accessed via mlx5_ib_dev (now, this needs to be a pointer dereference). 2. All PCI initializations are now done in mlx5_core. Thus, it is now mlx5_core which does pci_register_device (and not mlx5_ib, as was previously). 3. mlx5_ib now registers itself with mlx5_core as an "interface" driver. This is very similar to the mechanism employed for the mlx4 (ConnectX) driver. Once the HCA is initialized (by mlx5_core), it invokes the interface drivers to do their initializations. 4. There is a new event handler which the core registers: mlx5_core_event(). This event handler invokes the event handlers registered by the interfaces. Based on a patch by Eli Cohen <eli@mellanox.com> Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 5月, 2014 1 次提交
-
-
由 Shachar Raindel 提交于
Instead of having the UMR context part of each memory region, allocate a struct on the stack. This allows queuing multiple UMRs that access the same memory region. Signed-off-by: NShachar Raindel <raindel@mellanox.com> Signed-off-by: NHaggai Eran <haggaie@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 08 3月, 2014 3 次提交
-
-
由 Sagi Grimberg 提交于
This commit takes care of the generated signature error CQE generated by the HW (if happened). The underlying mlx5 driver will handle signature error completions and will mark the relevant memory region as dirty. Once the consumer gets the completion for the transaction, it must check for signature errors on signature memory region using a new lightweight verb ib_check_mr_status(). In case the user doesn't check for signature error (i.e. doesn't call ib_check_mr_status() with status check IB_MR_CHECK_SIG_STATUS), the memory region cannot be used for another signature operation (REG_SIG_MR work request will fail). Signed-off-by: NSagi Grimberg <sagig@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Sagi Grimberg 提交于
If user requested signature enable we initialize relevant mlx5_ib_qp members. We mark the qp as sig_enable and we increase the effective SQ size, but still limit the user max_send_wr to original size computed. We also allow the create_qp routine to accept sig_enable create flag. Signed-off-by: NSagi Grimberg <sagig@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Sagi Grimberg 提交于
Support create_mr and destroy_mr verbs. Creating ib_mr may be done for either ib_mr that will register regular page lists like alloc_fast_reg_mr routine, or indirect ib_mrs that can register other (pre-registered) ib_mrs in an indirect manner. In addition user may request signature enable, that will mean that the created ib_mr may be attached with signature attributes (BSF, PSVs). Currently we only allow direct/indirect registration modes. Signed-off-by: NSagi Grimberg <sagig@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 23 1月, 2014 1 次提交
-
-
由 Eli Cohen 提交于
Implement resize CQ which is a mandatory verb in mlx5. Signed-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 15 1月, 2014 1 次提交
-
-
由 Eli Cohen 提交于
The variable start in struct mlx5_ib_mr is never used. Remove it. Signed-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 09 11月, 2013 1 次提交
-
-
由 Eli Cohen 提交于
Use asynchronous commands to execute up to eight concurrent create MR commands. This is to fill memory caches faster so we keep consuming from there. Also, increase timeout for shrinking caches to five minutes. Signed-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 09 7月, 2013 1 次提交
-
-
由 Eli Cohen 提交于
The driver is comprised of two kernel modules: mlx5_ib and mlx5_core. This partitioning resembles what we have for mlx4, except that mlx5_ib is the pci device driver and not mlx5_core. mlx5_core is essentially a library that provides general functionality that is intended to be used by other Mellanox devices that will be introduced in the future. mlx5_ib has a similar role as any hardware device under drivers/infiniband/hw. Signed-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> [ Merge in coccinelle fixes from Fengguang Wu <fengguang.wu@intel.com>. - Roland ] Signed-off-by: NRoland Dreier <roland@purestorage.com>
-