The CRTC .disable() helper operation is deprecated for atomic drivers,
the new .atomic_disable() helper operation being preferred. Convert all
atomic drivers to .atomic_disable() to avoid cargo-cult use of
.disable() in new drivers.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # for sun4i
Acked-by: Philipp Zabel <p.zabel@pengutronix.de> # for mediatek
Acked-by: Alexey Brodkin <abrodkin@synopsys.com> # for arcpgu
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # for atmel-hlcdc
Tested-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Vincent Abriou <vincent.abriou@st.com> # for sti
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> # for vmwgfx
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170630093646.7928-3-laurent.pinchart+renesas@ideasonboard.com

The old state is useful for drivers that need to perform operations at
enable time that depend on the transition between the old and new
states.

While at it, rename the operation to .atomic_enable() to be consistent
with .atomic_disable(), as the .enable() operation is used by atomic
helpers only.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # for sun4i
Acked-by: Philipp Zabel <p.zabel@pengutronix.de> # for imx-drm and mediatek
Acked-by: Alexey Brodkin <abrodkin@synopsys.com> # for arcpgu
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # for atmel-hlcdc
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> # for hdlcd and mali-dp
Acked-by: Stefan Agner <stefan@agner.ch> # for fsl-dcu
Tested-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Vincent Abriou <vincent.abriou@st.com> # for sti
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> # for vmwgfx
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170630093646.7928-2-laurent.pinchart+renesas@ideasonboard.com

The CRTC helper .commit() operation is legacy code, the atomic helpers
prefer the .enable() operation. Replace the .commit() helper operation
with .enable() in the driver.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170627211621.27767-4-laurent.pinchart+renesas@ideasonboard.com

The CRTC .dpms() helper operation is called by the atomic helpers only
when no .prepare(), .atomic_disable() or .disable() operation is
provided. As the qxl driver provides a .disable() operation, the .dpms()
operation is unused and can be removed.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170627211621.27767-3-laurent.pinchart+renesas@ideasonboard.com

Flagged by sparse.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Acked-by: NDaniel Vetter <daniel@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170620113916.6967-3-kraxel@redhat.com

qxl_release_map will enter an atomic context, but since we still need to
alloc memory for BOs, we better delay that until we have everything we
need, in case we need to sleep inside the allocation.  This avoids the
Sleep in atomic state below, which was reported by Mike.

 [   43.910362] BUG: sleeping function called from invalid context at mm/slab.h:432
 [   43.910955] in_atomic(): 1, irqs_disabled(): 0, pid: 2077, name: Xorg
 [   43.911472] Preemption disabled at:
 [   43.911478] [<ffffffffa02b1c45>] qxl_bo_kmap_atomic_page+0xa5/0x100 [qxl]
 [   43.912103] CPU: 0 PID: 2077 Comm: Xorg Tainted: G            E   4.12.0-master #38
 [ 43.912550] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
 rel-1.8.1-0-g4adadbd-20161202_174313-build11a 04/01/2014
 [   43.913202] Call Trace:
 [   43.913371]  dump_stack+0x65/0x89
 [   43.913581]  ? qxl_bo_kmap_atomic_page+0xa5/0x100 [qxl]
 [   43.913876]  ___might_sleep+0x11a/0x190
 [   43.914095]  __might_sleep+0x4a/0x80
 [   43.914319]  ? qxl_bo_create+0x50/0x190 [qxl]
 [   43.914565]  kmem_cache_alloc_trace+0x46/0x180
 [   43.914836]  qxl_bo_create+0x50/0x190 [qxl]
 [   43.915082]  ? refcount_dec_and_test+0x11/0x20
 [   43.915332]  ? ttm_mem_io_reserve+0x41/0xe0 [ttm]
 [   43.915595]  qxl_alloc_bo_reserved+0x37/0xb0 [qxl]
 [   43.915884]  qxl_cursor_atomic_update+0x8f/0x260 [qxl]
 [   43.916172]  ? drm_atomic_helper_update_legacy_modeset_state+0x1d6/0x210 [drm_kms_helper]
 [   43.916623]  drm_atomic_helper_commit_planes+0xec/0x230 [drm_kms_helper]
 [   43.916995]  drm_atomic_helper_commit_tail+0x2b/0x60 [drm_kms_helper]
 [   43.917398]  commit_tail+0x65/0x70 [drm_kms_helper]
 [   43.917693]  drm_atomic_helper_commit+0xa9/0x100 [drm_kms_helper]
 [   43.918039]  drm_atomic_commit+0x4b/0x50 [drm]
 [   43.918334]  drm_atomic_helper_update_plane+0xf1/0x110 [drm_kms_helper]
 [   43.918902]  __setplane_internal+0x19f/0x280 [drm]
 [   43.919240]  drm_mode_cursor_universal+0x101/0x1c0 [drm]
 [   43.919541]  drm_mode_cursor_common+0x15b/0x1d0 [drm]
 [   43.919858]  drm_mode_cursor2_ioctl+0xe/0x10 [drm]
 [   43.920157]  drm_ioctl+0x211/0x460 [drm]
 [   43.920383]  ? drm_mode_cursor_ioctl+0x50/0x50 [drm]
 [   43.920664]  ? handle_mm_fault+0x93/0x160
 [   43.920893]  do_vfs_ioctl+0x96/0x6e0
 [   43.921117]  ? __fget+0x73/0xa0
 [   43.921322]  SyS_ioctl+0x41/0x70
 [   43.921545]  entry_SYSCALL_64_fastpath+0x1a/0xa5
 [   43.922188] RIP: 0033:0x7f1145804bc7
 [   43.922526] RSP: 002b:00007ffcd3e50508 EFLAGS: 00003246 ORIG_RAX: 0000000000000010
 [   43.923367] RAX: ffffffffffffffda RBX: 0000000000000040 RCX: 00007f1145804bc7
 [   43.923852] RDX: 00007ffcd3e50540 RSI: 00000000c02464bb RDI: 000000000000000b
 [   43.924299] RBP: 0000000000000040 R08: 0000000000000040 R09: 000000000000000c
 [   43.924694] R10: 00007ffcd3e50340 R11: 0000000000003246 R12: 0000000000000018
 [   43.925128] R13: 00000000022bc390 R14: 0000000000000040 R15: 00007ffcd3e5062c
Reported-by: NMike Galbraith <efault@gmx.de>
Signed-off-by: NGabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170519175819.15682-1-krisman@collabora.co.ukSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

Include <drm/*.h> instead of relative path from include/drm, then
remove the -Iinclude/drm compiler flag.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1493009447-31524-13-git-send-email-yamada.masahiro@socionext.com

My static checker complains that "release" is uninitialized if
qxl_alloc_release_reserved() fails, so let's add a check for that.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170314075410.GB5984@mwandaSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

Call qxl_add_monitors_config_modes() unconditionally.  Do all sanity
checks in that function.

Fix sanity checks.  monitors_config is the current monitor
configuration, whereas client_monitors_config is the configuration
requested by the spice client.  So when filling the mode list, based on
the spice client request, we need to look at
client_monitors_config->count not monitors_config->count.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NGabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1488363154-6889-5-git-send-email-kraxel@redhat.com

Try to read the client monitors config at driver load time, even without
explicit notification.  So in case that info was filled before the driver
loaded and we've missed the notifications because of that the settings
will still be used.

With that place we now have to take care to properly handle a empty client
monitors config, so we don't trip over an uninitialized client monitors
config.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NGabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1488363154-6889-4-git-send-email-kraxel@redhat.com

When reading the monitor config fails, don't retry forever.  If it fails
ten times in a row just give up to avoid the driver hangs.  Also add a
small delay after each attempt, so the host has a chance to complete a
partial update.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NGabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1488363154-6889-3-git-send-email-kraxel@redhat.com

Signed-off-by: NGabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170227204328.18761-14-krisman@collabora.co.ukSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170227204328.18761-13-krisman@collabora.co.ukSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

Now that the state objects are wired up, we can move to the final atomic
handlers.
Signed-off-by: NGabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170227204328.18761-12-krisman@collabora.co.ukSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170227204328.18761-11-krisman@collabora.co.ukSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170227204328.18761-10-krisman@collabora.co.ukSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

In the qxl atomic model, the primary doesn't stay pinned all the time,
instead it is only pinned/unpinned between prepare_fb and cleanup_fb.
So, we no longer need a final unpin of the primary framebuffer when
disabling the crtc.
Signed-off-by: NGabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170227204328.18761-9-krisman@collabora.co.ukSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170227204328.18761-8-krisman@collabora.co.ukSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170227204328.18761-7-krisman@collabora.co.ukSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

In preparation for atomic conversion, let's use the transitional atomic
helpers drm_plane_helper_update/disable.
Signed-off-by: NGabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170227204328.18761-6-krisman@collabora.co.ukSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

Let's expose the primary plane initialization inside the qxl driver in
preparation for universal planes and atomic.
Signed-off-by: NGabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170227204328.18761-5-krisman@collabora.co.ukSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

qxl don't have support for hardware vblanks so we can't initialize it
here, otherwise we risk getting stuck in drm_wait_one_vblank.
Signed-off-by: NGabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170227204328.18761-4-krisman@collabora.co.ukSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

Every attempt to pin/unpin objects in memory requires
qxl_bo_reserve/unreserve calls around the pinning operation to protect
the object from concurrent access, which causes that call sequence to be
reproduced every place where pinning is needed.  In some cases, that
sequence was not executed correctly, resulting in potential unprotected
pinning operations.

This commit encapsulates the reservation inside a new wrapper to make
sure it is always handled properly.  In cases where reservation must be
done beforehand, for some reason, one can use the unprotected version
__qxl_bo_pin/unpin.
Signed-off-by: NGabriel Krisman Bertazi <krisman@collabora.co.uk>
Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170227204328.18761-3-krisman@collabora.co.ukSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

The vblank hooks in struct drm_driver are deprecated and only meant for
legacy drivers.  For modern drivers with DRIVER_MODESET flag, the hooks
in struct drm_crtc_funcs should be used instead.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-16-git-send-email-shawnguo@kernel.org

This is the recommended way to create the drm_device structure,
according to DRM documentation.
Signed-off-by: NGabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170127010548.27970-4-krisman@collabora.co.ukSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

Registering the connector explicitly right after creation is not
necessary for modesetting drivers, because drm_dev_register already takes
care of this on the core side, by calling drm_modeset_register_all.

In addition, performing the initialization too early will get in the way
of the load() hook removal, because the connector interface cannot be
published prior to registering the minors.
Signed-off-by: NGabriel Krisman Bertazi <krisman@collabora.co.uk>
CC: Dave Airlie <airlied@redhat.com>
CC: Daniel Vetter <daniel.vetter@ffwll.ch>
CC: dri-devel@lists.freedesktop.org
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170112161610.19924-1-krisman@collabora.co.uk

We want framebuffers to be mostly useable already before
drm_framebuffer_init() is called, and so we will start demanding that
all the interesting format/size/etc. information be filled in before
drm_framebuffer_init(). drm_helper_mode_fill_fb_struct() will do that
for us, so let's make sure it gets called before drm_framebuffer_init().

Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-16-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Pass the drm_device to drm_helper_mode_fill_fb_struct() so that we can
populate fb->dev early. Will make it easier to use the fb before we
register it.

@@
identifier fb, mode_cmd;
@@
 void drm_helper_mode_fill_fb_struct(
+				     struct drm_device *dev,
				     struct drm_framebuffer *fb,
				     const struct drm_mode_fb_cmd2 *mode_cmd
				     );

@@
identifier fb, mode_cmd;
@@
 void drm_helper_mode_fill_fb_struct(
+				     struct drm_device *dev,
				     struct drm_framebuffer *fb,
				     const struct drm_mode_fb_cmd2 *mode_cmd
				     )
{ ... }

@@
function func;
identifier dev;
expression E1, E2;
@@
func(struct drm_device *dev, ...)
{
 ...
 drm_helper_mode_fill_fb_struct(
+				dev,
				E1, E2);
 ...
}

@@
expression E1, E2;
@@
 drm_helper_mode_fill_fb_struct(
+				dev,
				E1, E2);

v2: Rerun spatch due to code changes
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481748539-18283-1-git-send-email-ville.syrjala@linux.intel.com

The use of drm_cvt_mode() in qxl_add_monitors_config_modes() means that
the resolutions we are going to present to user-space are going to be
rounded down to a multiple of 8. In the QXL arbitrary resolution case,
this is not useful.
This commit forces the actual width/height that was requested by the
client in the drm_display_mode structure rather than keeping the
rounded version.
Signed-off-by: NChristophe Fergeau <cfergeau@redhat.com>
Message-id: 20161108091209.25568-8-cfergeau@redhat.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

When the QXL driver receives a QXL_INTERRUPT_CLIENT_MONITORS_CONFIG interrupt,
we currently always notify userspace that there was some hotplug event.

However, gnome-shell/mutter is reacting to this event by attempting a
resolution change, which it does by issueing drmModeRmFB, drmModeAddFB,
and then drmModeSetCrtc. This has the side-effect of causing
qxl_crtc_mode_set() to tell the QXL virtual hardware that a primary
surface was destroyed and created. After going through QEMU and then the
remote SPICE client, a new identical monitors config message will be
sent, resulting in a QXL_INTERRUPT_CLIENT_MONITORS_CONFIG interrupt to
be emitted, and the same scenario occurring again.

As destroying/creating the primary surface causes a visible screen
flicker, this makes the guest hard to use (
https://bugzilla.redhat.com/show_bug.cgi?id=1266484 ).

This commit checks if the screen configuration we received is the same
one as the current one, and does not notify userspace about it if that's
the case.
Signed-off-by: NChristophe Fergeau <cfergeau@redhat.com>
Acked-by: NFrediano Ziglio <fziglio@redhat.com>
Message-id: 20161108091209.25568-7-cfergeau@redhat.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

They are not used outside of their respective source file
Signed-off-by: NChristophe Fergeau <cfergeau@redhat.com>
Acked-by: NFrediano Ziglio <fziglio@redhat.com>
Message-id: 20161108091209.25568-2-cfergeau@redhat.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The qxl driver currently destroys and recreates the
qxl "primary" any time the first crtc is set.

A side-effect of destroying the primary is mouse state
associated with the crtc is lost, which leads to
disappearing mouse cursors on wayland sessions.

This commit changes the driver to reapply the cursor
any time SetCrtc is called. It achieves this by keeping
a reference to the cursor bo on the qxl_crtc struct.
Signed-off-by: NRay Strode <rstrode@redhat.com>
Message-id: 1473433745-11016-1-git-send-email-halfline@gmail.com

https://bugzilla.redhat.com/show_bug.cgi?id=1200901Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The drm_gem_object_unreference_unlocked() function tests whether
its argument is NULL and then returns immediately.
Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/913198fa-2aa4-4804-8616-dd495428c0a5@users.sourceforge.net

Replace the legacy drm_vblank_{get,put}() with the new helper functions.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465224105-21485-12-git-send-email-gustavo@padovan.org

Replace the legacy drm_send_vblank_event() with the new helper function.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465224105-21485-4-git-send-email-gustavo@padovan.org

qxl doesn't have any functions for setting the gamma table, so this is
completely defunct.

Not nice to lie to userspace, so let's stop!

Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1459331485-28376-10-git-send-email-daniel.vetter@ffwll.ch

drm_gem_object_lookup() has never required the drm_device for its file
local translation of the user handle to the GEM object. Let's remove the
unused parameter and save some space.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: dri-devel@lists.freedesktop.org
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: Fixup kerneldoc too.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Use the fbdev deferred io support in drm_fb_helper which mirrors the
one qxl has had.
This patch has only been compile tested.
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461856717-6476-7-git-send-email-noralf@tronnes.org

The SPICE protocol considers the position of a cursor to be the location
of its active pixel on the display, so the cursor is drawn with its
top-left corner at "(x - hot_spot_x, y - hot_spot_y)" but the DRM cursor
position gives the location where the top-left corner should be drawn,
with the hotspot being a hint for drivers that need it.

This fixes the location of the window resize cursors when using Fluxbox
with the QXL DRM driver and both the QXL and modesetting X drivers.
Signed-off-by: NJohn Keeping <john@metanate.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Link: http://patchwork.freedesktop.org/patch/msgid/1447845445-2116-1-git-send-email-john@metanate.comSigned-off-by: NJani Nikula <jani.nikula@intel.com>

mode_fixup function for encoder drivers became optional with patch
http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com

This patch set nukes all the dummy mode_fixup implementations.

(made on top of Daniel topic/drm-misc branch)
Signed-off-by: NCarlos Palminha <palminha@synopsys.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/f35bc322f7af69ba0fea734d58b4daf5e0cd9786.1455540137.git.palminha@synopsys.com