- 23 11月, 2018 25 次提交
-
-
由 Shay Agroskin 提交于
[ Upstream commit 64e28334 ] Querying interface FEC caps with 'ethtool [int]' after link reset throws warning regading link speed. This warning is not needed as there is already an indication in user space that the link is not up. Fixes: 0696d608 ("net/mlx5e: Receive buffer configuration") Signed-off-by: NShay Agroskin <shayag@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Valentine Fatiev 提交于
[ Upstream commit 228c4cd0 ] Loopback test had fixed packet size, which can be bigger than configured MTU. Shorten the loopback packet size to be bigger than minimal MTU allowed by the device. Text field removed from struct 'mlx5ehdr' as redundant to allow send small packets as minimal allowed MTU. Fixes: d605d668 ("net/mlx5e: Add support for ethtool self diagnostics test") Signed-off-by: NValentine Fatiev <valentinef@mellanox.com> Reviewed-by: NEran Ben Elisha <eranbe@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Or Gerlitz 提交于
[ Upstream commit 83621b7d ] We get the match level (none, l2, l3, l4) while going over the match dissectors of an offloaded tc rule. When doing this, the match level enum and the not min inline enum values should be used, fix that. This worked accidentally b/c both enums have the same numerical values. Fixes: d708f902 ('net/mlx5e: Get the required HW match level while parsing TC flow matches') Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NRoi Dayan <roid@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Xin Long 提交于
[ Upstream commit 69fec325 ] This reverts commit 22d7be26. The dst's mtu in transport can be updated by a non sctp place like in xfrm where the MTU information didn't get synced between asoc, transport and dst, so it is still needed to do the pmtu check in sctp_packet_config. Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Moshe Shemesh 提交于
[ Upstream commit 0073c8f7 ] In case of striding RQ, we use MPWRQ (Multi Packet WQE RQ), which means that WQE (RX descriptor) can be used for many packets and so the WQE is much bigger than MTU. In virtualization setups where the port mtu can be larger than the vf mtu, if received packet is bigger than MTU, it won't be dropped by HW on too small receive WQE. If we use linear SKB in striding RQ, since each stride has room for mtu size payload and skb info, an oversized packet can lead to crash for crossing allocated page boundary upon the call to build_skb. So driver needs to check packet size and drop it. Introduce new SW rx counter, rx_oversize_pkts_sw_drop, which counts the number of packets dropped by the driver for being too large. As a new field is added to the RQ struct, re-open the channels whenever this field is being used in datapath (i.e., in the case of linear Striding RQ). Fixes: 619a8f2a ("net/mlx5e: Use linear SKB in Striding RQ") Signed-off-by: NMoshe Shemesh <moshe@mellanox.com> Reviewed-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Yuval Avnery 提交于
[ Upstream commit a1f240f1 ] When core driver enters deattach/attach flow after pci reset, Number of logical CPUs may have changed. As a result we need to update the cpu affiliated resource tables. 1. indirect rqt list 2. eq table Reproduction (PowerPC): echo 1000 > /sys/kernel/debug/powerpc/eeh_max_freezes ppc64_cpu --smt=on # Restart driver modprobe -r ... ; modprobe ... # Link up ifconfig ... # Only physical CPUs ppc64_cpu --smt=off # Inject PCI errors so PCI will reset - calling the pci error handler echo 0x8000000000000000 > /sys/kernel/debug/powerpc/<PCI BUS>/err_injct_inboundA Call trace when trying to add non-existing rqs to an indirect rqt: mlx5e_redirect_rqt+0x84/0x260 [mlx5_core] (unreliable) mlx5e_redirect_rqts+0x188/0x190 [mlx5_core] mlx5e_activate_priv_channels+0x488/0x570 [mlx5_core] mlx5e_open_locked+0xbc/0x140 [mlx5_core] mlx5e_open+0x50/0x130 [mlx5_core] mlx5e_nic_enable+0x174/0x1b0 [mlx5_core] mlx5e_attach_netdev+0x154/0x290 [mlx5_core] mlx5e_attach+0x88/0xd0 [mlx5_core] mlx5_attach_device+0x168/0x1e0 [mlx5_core] mlx5_load_one+0x1140/0x1210 [mlx5_core] mlx5_pci_resume+0x6c/0xf0 [mlx5_core] Create cq will fail when trying to use non-existing EQ. Fixes: 89d44f0a ("net/mlx5_core: Add pci error handlers to mlx5_core driver") Signed-off-by: NYuval Avnery <yuvalav@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Or Gerlitz 提交于
[ Upstream commit 077ecd78 ] Currently, we are only supporting tc hw offloads when the eswitch support is compiled in, but we are not gating the adevertizment of the NETIF_F_HW_TC feature on this config being set. Fix it, and while doing that, also avoid dealing with the feature on ethtool when the config is not set. Fixes: e8f887ac ('net/mlx5e: Introduce tc offload support') Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NRoi Dayan <roid@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Or Gerlitz 提交于
[ Upstream commit d3a80bb5 ] For the "all" ethertype we should not care whether the packet has vlans. Besides being wrong, the way we did it caused FW error for rules such as: tc filter add dev eth0 protocol all parent ffff: \ prio 1 flower skip_sw action drop b/c the matching meta-data (outer headers bit in struct mlx5_flow_spec) wasn't set. Fix that by matching on vlan non-existence only if we were also told to match on the ethertype. Fixes: cee26487 ('net/mlx5e: Set vlan masks for all offloaded TC rules') Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reported-by: NSlava Ovsiienko <viacheslavo@mellanox.com> Reviewed-by: NJianbo Liu <jianbol@mellanox.com> Reviewed-by: NRoi Dayan <roid@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jon Maloy 提交于
[ Upstream commit 7ab412d3 ] When a link failure is detected locally, the link is reset, the flag link->in_session is set to false, and a RESET_MSG with the 'stopping' bit set is sent to the peer. The purpose of this bit is to inform the peer that this endpoint just is going down, and that the peer should handle the reception of this particular RESET message as a local failure. This forces the peer to accept another RESET or ACTIVATE message from this endpoint before it can re-establish the link. This again is necessary to ensure that link session numbers are properly exchanged before the link comes up again. If a failure is detected locally at the same time at the peer endpoint this will do the same, which is also a correct behavior. However, when receiving such messages, the endpoints will not distinguish between 'stopping' RESETs and ordinary ones when it comes to updating session numbers. Both endpoints will copy the received session number and set their 'in_session' flags to true at the reception, while they are still expecting another RESET from the peer before they can go ahead and re-establish. This is contradictory, since, after applying the validation check referred to below, the 'in_session' flag will cause rejection of all such messages, and the link will never come up again. We now fix this by not only handling received RESET/STOPPING messages as a local failure, but also by omitting to set a new session number and the 'in_session' flag in such cases. Fixes: 7ea817f4 ("tipc: check session number before accepting link protocol messages") Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jakub Kicinski 提交于
[ Upstream commit 63c82997 ] TCA_FLOWER_KEY_ENC_OPTS and TCA_FLOWER_KEY_ENC_OPTS_MASK can only currently contain further nested attributes, which are parsed by hand, so the policy is never actually used resulting in a W=1 build warning: net/sched/cls_flower.c:492:1: warning: ‘enc_opts_policy’ defined but not used [-Wunused-const-variable=] enc_opts_policy[TCA_FLOWER_KEY_ENC_OPTS_MAX + 1] = { Add the validation anyway to avoid potential bugs when other attributes are added and to make the attribute structure slightly more clear. Validation will also set extact to point to bad attribute on error. Fixes: 0a6e7778 ("net/sched: allow flower to match tunnel options") Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Acked-by: NSimon Horman <simon.horman@netronome.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Davide Caratti 提交于
[ Upstream commit 19ab69107d3ecfb7cd3e38ad262a881be40c01a3 ] tcf_idr_check_alloc() can return a negative value, on allocation failures (-ENOMEM) or IDR exhaustion (-ENOSPC): don't leak keys_ex in these cases. Fixes: 0190c1d4 ("net: sched: atomically check-allocate action") Signed-off-by: NDavide Caratti <dcaratti@redhat.com> Acked-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Florian Fainelli 提交于
[ Upstream commit 7cb6a2a2 ] A timing hazard exists when the network interface is stopped that allows a watchdog timeout to be processed by a separate core in parallel. This creates the potential for the timeout handler to wake the queues while the driver is shutting down, or access registers after their clocks have been removed. The more common case is that the watchdog timeout will produce a warning message which doesn't lead to a crash. The chances of this are greatly increased by the fact that bcm_sysport_netif_stop stops the transmit queues which can easily precipitate a watchdog time- out because of stale trans_start data in the queues. This commit corrects the behavior by ensuring that the watchdog timeout is disabled before enterring bcm_sysport_netif_stop. There are currently only two users of the bcm_sysport_netif_stop function: close and suspend. The close case already handles the issue by exiting the RUNNING state before invoking the driver close service. The suspend case now performs the netif_device_detach to exit the PRESENT state before the call to bcm_sysport_netif_stop rather than after it. These behaviors prevent any future scheduling of the driver timeout service during the window. The netif_tx_stop_all_queues function in bcm_sysport_netif_stop is replaced with netif_tx_disable to ensure synchronization with any transmit or timeout threads that may already be executing on other cores. For symmetry, the netif_device_attach call upon resume is moved to after the call to bcm_sysport_netif_start. Since it wakes the transmit queues it is not necessary to invoke netif_tx_start_all_queues from bcm_sysport_netif_start so it is moved into the driver open service. Fixes: 40755a0f ("net: systemport: add suspend and resume support") Fixes: 80105bef ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Matthew Cover 提交于
[ Upstream commit 8ebebcba ] When writing packets to a descriptor associated with a combined queue, the packets should end up on that queue. Before this change all packets written to any descriptor associated with a tap interface end up on rx-0, even when the descriptor is associated with a different queue. The rx traffic can be generated by either of the following. 1. a simple tap program which spins up multiple queues and writes packets to each of the file descriptors 2. tx from a qemu vm with a tap multiqueue netdev The queue for rx traffic can be observed by either of the following (done on the hypervisor in the qemu case). 1. a simple netmap program which opens and reads from per-queue descriptors 2. configuring RPS and doing per-cpu captures with rxtxcpu Alternatively, if you printk() the return value of skb_get_rx_queue() just before each instance of netif_receive_skb() in tun.c, you will get 65535 for every skb. Calling skb_record_rx_queue() to set the rx queue to the queue_index fixes the association between descriptor and rx queue. Signed-off-by: NMatthew Cover <matthew.cover@stackpath.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jon Maloy 提交于
[ Upstream commit adba75be ] We get the following warning: [ 47.926140] 32-bit node address hash set to 2010a0a [ 47.927202] [ 47.927433] ================================ [ 47.928050] WARNING: inconsistent lock state [ 47.928661] 4.19.0+ #37 Tainted: G E [ 47.929346] -------------------------------- [ 47.929954] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 47.930116] swapper/3/0 [HC0[0]:SC1[3]:HE1:SE0] takes: [ 47.930116] 00000000af8bc31e (&(&ht->lock)->rlock){+.?.}, at: rhashtable_walk_enter+0x36/0xb0 [ 47.930116] {SOFTIRQ-ON-W} state was registered at: [ 47.930116] _raw_spin_lock+0x29/0x60 [ 47.930116] rht_deferred_worker+0x556/0x810 [ 47.930116] process_one_work+0x1f5/0x540 [ 47.930116] worker_thread+0x64/0x3e0 [ 47.930116] kthread+0x112/0x150 [ 47.930116] ret_from_fork+0x3a/0x50 [ 47.930116] irq event stamp: 14044 [ 47.930116] hardirqs last enabled at (14044): [<ffffffff9a07fbba>] __local_bh_enable_ip+0x7a/0xf0 [ 47.938117] hardirqs last disabled at (14043): [<ffffffff9a07fb81>] __local_bh_enable_ip+0x41/0xf0 [ 47.938117] softirqs last enabled at (14028): [<ffffffff9a0803ee>] irq_enter+0x5e/0x60 [ 47.938117] softirqs last disabled at (14029): [<ffffffff9a0804a5>] irq_exit+0xb5/0xc0 [ 47.938117] [ 47.938117] other info that might help us debug this: [ 47.938117] Possible unsafe locking scenario: [ 47.938117] [ 47.938117] CPU0 [ 47.938117] ---- [ 47.938117] lock(&(&ht->lock)->rlock); [ 47.938117] <Interrupt> [ 47.938117] lock(&(&ht->lock)->rlock); [ 47.938117] [ 47.938117] *** DEADLOCK *** [ 47.938117] [ 47.938117] 2 locks held by swapper/3/0: [ 47.938117] #0: 0000000062c64f90 ((&d->timer)){+.-.}, at: call_timer_fn+0x5/0x280 [ 47.938117] #1: 00000000ee39619c (&(&d->lock)->rlock){+.-.}, at: tipc_disc_timeout+0xc8/0x540 [tipc] [ 47.938117] [ 47.938117] stack backtrace: [ 47.938117] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G E 4.19.0+ #37 [ 47.938117] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 47.938117] Call Trace: [ 47.938117] <IRQ> [ 47.938117] dump_stack+0x5e/0x8b [ 47.938117] print_usage_bug+0x1ed/0x1ff [ 47.938117] mark_lock+0x5b5/0x630 [ 47.938117] __lock_acquire+0x4c0/0x18f0 [ 47.938117] ? lock_acquire+0xa6/0x180 [ 47.938117] lock_acquire+0xa6/0x180 [ 47.938117] ? rhashtable_walk_enter+0x36/0xb0 [ 47.938117] _raw_spin_lock+0x29/0x60 [ 47.938117] ? rhashtable_walk_enter+0x36/0xb0 [ 47.938117] rhashtable_walk_enter+0x36/0xb0 [ 47.938117] tipc_sk_reinit+0xb0/0x410 [tipc] [ 47.938117] ? mark_held_locks+0x6f/0x90 [ 47.938117] ? __local_bh_enable_ip+0x7a/0xf0 [ 47.938117] ? lockdep_hardirqs_on+0x20/0x1a0 [ 47.938117] tipc_net_finalize+0xbf/0x180 [tipc] [ 47.938117] tipc_disc_timeout+0x509/0x540 [tipc] [ 47.938117] ? call_timer_fn+0x5/0x280 [ 47.938117] ? tipc_disc_msg_xmit.isra.19+0xa0/0xa0 [tipc] [ 47.938117] ? tipc_disc_msg_xmit.isra.19+0xa0/0xa0 [tipc] [ 47.938117] call_timer_fn+0xa1/0x280 [ 47.938117] ? tipc_disc_msg_xmit.isra.19+0xa0/0xa0 [tipc] [ 47.938117] run_timer_softirq+0x1f2/0x4d0 [ 47.938117] __do_softirq+0xfc/0x413 [ 47.938117] irq_exit+0xb5/0xc0 [ 47.938117] smp_apic_timer_interrupt+0xac/0x210 [ 47.938117] apic_timer_interrupt+0xf/0x20 [ 47.938117] </IRQ> [ 47.938117] RIP: 0010:default_idle+0x1c/0x140 [ 47.938117] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 41 54 55 53 65 8b 2d d8 2b 74 65 0f 1f 44 00 00 e8 c6 2c 8b ff fb f4 <65> 8b 2d c5 2b 74 65 0f 1f 44 00 00 5b 5d 41 5c c3 65 8b 05 b4 2b [ 47.938117] RSP: 0018:ffffaf6ac0207ec8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13 [ 47.938117] RAX: ffff8f5b3735e200 RBX: 0000000000000003 RCX: 0000000000000001 [ 47.938117] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff8f5b3735e200 [ 47.938117] RBP: 0000000000000003 R08: 0000000000000001 R09: 0000000000000000 [ 47.938117] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 47.938117] R13: 0000000000000000 R14: ffff8f5b3735e200 R15: ffff8f5b3735e200 [ 47.938117] ? default_idle+0x1a/0x140 [ 47.938117] do_idle+0x1bc/0x280 [ 47.938117] cpu_startup_entry+0x19/0x20 [ 47.938117] start_secondary+0x187/0x1c0 [ 47.938117] secondary_startup_64+0xa4/0xb0 The reason seems to be that tipc_net_finalize()->tipc_sk_reinit() is calling the function rhashtable_walk_enter() within a timer interrupt. We fix this by executing tipc_net_finalize() in work queue context. Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jon Maloy 提交于
[ Upstream commit 1c1274a5 ] The code for reading ancillary data from a received buffer is assuming the buffer is linear. To make this assumption true we have to linearize the buffer before message data is read. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Siva Reddy Kallam 提交于
[ Upstream commit 59663e42 ] This patch has the fix to avoid PHY lockup with 5717/5719/5720 in change ring and flow control paths. This patch solves the RX hang while doing continuous ring or flow control parameters with heavy traffic from peer. Signed-off-by: NSiva Reddy Kallam <siva.kallam@broadcom.com> Acked-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Stephen Mallon 提交于
[ Upstream commit cadf9df2 ] During tcp coalescing ensure that the skb hardware timestamp refers to the highest sequence number data. Previously only the software timestamp was updated during coalescing. Signed-off-by: NStephen Mallon <stephen.mallon@sydney.edu.au> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Xin Long 提交于
[ Upstream commit cc3ccf26 ] As rfc7496#section4.5 says about SCTP_PR_SUPPORTED: This socket option allows the enabling or disabling of the negotiation of PR-SCTP support for future associations. For existing associations, it allows one to query whether or not PR-SCTP support was negotiated on a particular association. It means only sctp sock's prsctp_enable can be set. Note that for the limitation of SCTP_{CURRENT|ALL}_ASSOC, we will add it when introducing SCTP_{FUTURE|CURRENT|ALL}_ASSOC for linux sctp in another patchset. v1->v2: - drop the params.assoc_id check as Neil suggested. Fixes: 28aa4c26 ("sctp: add SCTP_PR_SUPPORTED on sctp sockopt") Reported-by: NYing Xu <yinxu@redhat.com> Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Eric Dumazet 提交于
[ Upstream commit 33d9a2c7 ] eth_type_trans() assumes initial value for skb->pkt_type is PACKET_HOST. This is indeed the value right after a fresh skb allocation. However, it is possible that GRO merged a packet with a different value (like PACKET_OTHERHOST in case macvlan is used), so we need to make sure napi->skb will have pkt_type set back to PACKET_HOST. Otherwise, valid packets might be dropped by the stack because their pkt_type is not PACKET_HOST. napi_reuse_skb() was added in commit 96e93eab ("gro: Add internal interfaces for VLAN"), but this bug always has been there. Fixes: 96e93eab ("gro: Add internal interfaces for VLAN") Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Doug Berger 提交于
A timing hazard exists when the network interface is stopped that allows a watchdog timeout to be processed by a separate core in parallel. This creates the potential for the timeout handler to wake the queues while the driver is shutting down, or access registers after their clocks have been removed. The more common case is that the watchdog timeout will produce a warning message which doesn't lead to a crash. The chances of this are greatly increased by the fact that bcmgenet_netif_stop stops the transmit queues which can easily precipitate a watchdog time- out because of stale trans_start data in the queues. This commit corrects the behavior by ensuring that the watchdog timeout is disabled before enterring bcmgenet_netif_stop. There are currently only two users of the bcmgenet_netif_stop function: close and suspend. The close case already handles the issue by exiting the RUNNING state before invoking the driver close service. The suspend case now performs the netif_device_detach to exit the PRESENT state before the call to bcmgenet_netif_stop rather than after it. These behaviors prevent any future scheduling of the driver timeout service during the window. The netif_tx_stop_all_queues function in bcmgenet_netif_stop is replaced with netif_tx_disable to ensure synchronization with any transmit or timeout threads that may already be executing on other cores. For symmetry, the netif_device_attach call upon resume is moved to after the call to bcmgenet_netif_start. Since it wakes the transmit queues it is not necessary to invoke netif_tx_start_all_queues from bcmgenet_netif_start so it is moved into the driver open service. [ Upstream commit 09e805d2 ] Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by: NDoug Berger <opendmb@gmail.com> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 David Ahern 提交于
[ Upstream commit 7ddacfa5 ] Preethi reported that PMTU discovery for UDP/raw applications is not working in the presence of VRF when the socket is not bound to a device. The problem is that ip6_sk_update_pmtu does not consider the L3 domain of the skb device if the socket is not bound. Update the function to set oif to the L3 master device if relevant. Fixes: ca254490 ("net: Add VRF support to IPv6 stack") Reported-by: NPreethi Ramachandra <preethir@juniper.net> Signed-off-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Xin Long 提交于
[ Upstream commit 761f6026 ] These is no need to hold dst before calling rt6_remove_exception_rt(). The call to dst_hold_safe() in ip6_link_failure() was for ip6_del_rt(), which has been removed in Commit 93531c67 ("net/ipv6: separate handling of FIB entries from dst based routes"). Otherwise, it will cause a dst leak. This patch is to simply remove the dst_hold_safe() call before calling rt6_remove_exception_rt() and also do the same in ip6_del_cached_rt(). It's safe, because the removal of the exception that holds its dst's refcnt is protected by rt6_exception_lock. Fixes: 93531c67 ("net/ipv6: separate handling of FIB entries from dst based routes") Fixes: 23fb93a4 ("net/ipv6: Cleanup exception and cache route handling") Reported-by: NLi Shuang <shuali@redhat.com> Signed-off-by: NXin Long <lucien.xin@gmail.com> Reviewed-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Sabrina Dubroca 提交于
[ Upstream commit 16f7eb2b ] The various types of tunnels running over IPv4 can ask to set the DF bit to do PMTU discovery. However, PMTU discovery is subject to the threshold set by the net.ipv4.route.min_pmtu sysctl, and is also disabled on routes with "mtu lock". In those cases, we shouldn't set the DF bit. This patch makes setting the DF bit conditional on the route's MTU locking state. This issue seems to be older than git history. Signed-off-by: NSabrina Dubroca <sd@queasysnail.net> Reviewed-by: NStefano Brivio <sbrivio@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Michał Mirosław 提交于
[ Upstream commit e84b4794 ] Don't request tag insertion when it isn't present in outgoing skb. Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 배석진 提交于
[ Upstream commit 62230715 ] Only first fragment has the sport/dport information, not the following ones. If we want consistent hash for all fragments, we need to ignore ports even for first fragment. This bug is visible for IPv6 traffic, if incoming fragments do not have a flow label, since skb_get_hash() will give different results for first fragment and following ones. It is also visible if any routing rule wants dissection and sport or dport. See commit 5e5d6fed ("ipv6: route: dissect flow in input path if fib rules need it") for details. [edumazet] rewrote the changelog completely. Fixes: 06635a35 ("flow_dissect: use programable dissector in skb_flow_dissect and friends") Signed-off-by: N배석진 <soukjin.bae@samsung.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 21 11月, 2018 15 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
由 Greg Kroah-Hartman 提交于
This reverts commit 22083c02 which is commit 4abb951b upstream. Jean writes: This commit was tagged with: Link: https://bugzilla.kernel.org/show_bug.cgi?id=200011 Tested-by: Jean-Marc Lenoir Cc: All applicable <stable@vger.kernel.org> making it sound like it was fixing an actual bug. This is not the case. The commit fixes a side issue discovered while investigating bug #200011. It does NOT fix bug #200011 itself (as explicitly reported by Jean-Marc at https://bugzilla.kernel.org/show_bug.cgi?id=200011#c65 ). It does however cause regressions, despite what the commit message says. See: https://bugzilla.kernel.org/show_bug.cgi?id=201721 and I expect more similar regressions, as ACPI resource conflicts are very frequent. This commit was not stable material to start with. It is intrusive, presents a risk of side effects, and does not solve an actual bug that is bothering users. Reported-by: NJean Delvare <jdelvare@suse.de> Cc: Jean-Marc Lenoir <archlinux@jihemel.com> Cc: Erik Schmauss <erik.schmauss@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Stefano Stabellini 提交于
commit f9005571 upstream. xen_create_contiguous_region has now only an implementation if CONFIG_XEN_PV is defined. However, on ARM we never set CONFIG_XEN_PV but we do have an implementation of xen_create_contiguous_region which is required for swiotlb-xen to work correctly (although it just sets *dma_handle). [backport: remove change to xen_remap_pfn] Cc: <stable@vger.kernel.org> # 4.12 Fixes: 16624390 ("xen: create xen_create/destroy_contiguous_region() stubs for PVHVM only builds") Signed-off-by: NStefano Stabellini <stefanos@xilinx.com> Reviewed-by: NJuergen Gross <jgross@suse.com> CC: Jeff.Kubascik@dornerworks.com CC: Jarvis.Roach@dornerworks.com CC: Nathan.Studer@dornerworks.com CC: vkuznets@redhat.com CC: boris.ostrovsky@oracle.com CC: jgross@suse.com CC: julien.grall@arm.com Signed-off-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Ville Syrjälä 提交于
commit 44a7276b upstream. In my haste to remove irq_port[] I accidentally changed the way we deal with hpd pins that are shared by multiple encoders (DP and HDMI for pre-DDI platforms). Previously we would only handle such pins via ->hpd_pulse(), but now we queue up the hotplug work for the HDMI encoder directly. Worse yet, we now count each hpd twice and this increment the hpd storm count twice as fast. This can lead to spurious storms being detected. Go back to the old way of doing things, ie. delegate to ->hpd_pulse() for any pin which has an encoder with that hook implemented. I don't really like the idea of adding irq_port[] back so let's loop through the encoders first to check if we have an encoder with ->hpd_pulse() for the pin, and then go through all the pins and decided on the correct course of action based on the earlier findings. I have occasionally toyed with the idea of unifying the pre-DDI HDMI and DP encoders into a single encoder as well. Besides the hotplug processing it would have the other benefit of preventing userspace from trying to enable both encoders at the same time. That is simply illegal as they share the same clock/data pins. We have some testcases that will attempt that and thus fail on many older machines. But for now let's stick to fixing just the hotplug code. Cc: stable@vger.kernel.org # 4.19+ Cc: Lyude Paul <lyude@redhat.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Fixes: b6ca3eee ("drm/i915: Nuke dev_priv->irq_port[]") Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181108200424.28371-1-ville.syrjala@linux.intel.comReviewed-by: NLyude Paul <lyude@redhat.com> (cherry picked from commit 5a3aeca9) Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Lyude Paul 提交于
commit 541ff7e9 upstream. Turns out that if you trigger an HPD storm on a system that has an MST topology connected to it, you'll end up causing the kernel to eventually hit a NULL deref: [ 332.339041] BUG: unable to handle kernel NULL pointer dereference at 00000000000000ec [ 332.340906] PGD 0 P4D 0 [ 332.342750] Oops: 0000 [#1] SMP PTI [ 332.344579] CPU: 2 PID: 25 Comm: kworker/2:0 Kdump: loaded Tainted: G O 4.18.0-rc3short-hpd-storm+ #2 [ 332.346453] Hardware name: LENOVO 20BWS1KY00/20BWS1KY00, BIOS JBET71WW (1.35 ) 09/14/2018 [ 332.348361] Workqueue: events intel_hpd_irq_storm_reenable_work [i915] [ 332.350301] RIP: 0010:intel_hpd_irq_storm_reenable_work.cold.3+0x2f/0x86 [i915] [ 332.352213] Code: 00 00 ba e8 00 00 00 48 c7 c6 c0 aa 5f a0 48 c7 c7 d0 73 62 a0 4c 89 c1 4c 89 04 24 e8 7f f5 af e0 4c 8b 04 24 44 89 f8 29 e8 <41> 39 80 ec 00 00 00 0f 85 43 13 fc ff 41 0f b6 86 b8 04 00 00 41 [ 332.354286] RSP: 0018:ffffc90000147e48 EFLAGS: 00010006 [ 332.356344] RAX: 0000000000000005 RBX: ffff8802c226c9d4 RCX: 0000000000000006 [ 332.358404] RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffff88032dc95570 [ 332.360466] RBP: 0000000000000005 R08: 0000000000000000 R09: ffff88031b3dc840 [ 332.362528] R10: 0000000000000000 R11: 000000031a069602 R12: ffff8802c226ca20 [ 332.364575] R13: ffff8802c2268000 R14: ffff880310661000 R15: 000000000000000a [ 332.366615] FS: 0000000000000000(0000) GS:ffff88032dc80000(0000) knlGS:0000000000000000 [ 332.368658] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 332.370690] CR2: 00000000000000ec CR3: 000000000200a003 CR4: 00000000003606e0 [ 332.372724] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 332.374773] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 332.376798] Call Trace: [ 332.378809] process_one_work+0x1a1/0x350 [ 332.380806] worker_thread+0x30/0x380 [ 332.382777] ? wq_update_unbound_numa+0x10/0x10 [ 332.384772] kthread+0x112/0x130 [ 332.386740] ? kthread_create_worker_on_cpu+0x70/0x70 [ 332.388706] ret_from_fork+0x35/0x40 [ 332.390651] Modules linked in: i915(O) vfat fat joydev btusb btrtl btbcm btintel bluetooth ecdh_generic iTCO_wdt wmi_bmof i2c_algo_bit drm_kms_helper intel_rapl syscopyarea sysfillrect x86_pkg_temp_thermal sysimgblt coretemp fb_sys_fops crc32_pclmul drm psmouse pcspkr mei_me mei i2c_i801 lpc_ich mfd_core i2c_core tpm_tis tpm_tis_core thinkpad_acpi wmi tpm rfkill video crc32c_intel serio_raw ehci_pci xhci_pci ehci_hcd xhci_hcd [last unloaded: i915] [ 332.394963] CR2: 00000000000000ec This appears to be due to the fact that with an MST topology, not all intel_connector structs will have ->encoder set. So, fix this by skipping connectors without encoders in intel_hpd_irq_storm_reenable_work(). For those wondering, this bug was found on accident while simulating HPD storms using a Chamelium connected to a ThinkPad T450s (Broadwell). Changes since v1: - Check intel_connector->mst_port instead of intel_connector->encoder Signed-off-by: NLyude Paul <lyude@redhat.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181106213017.14563-3-lyude@redhat.com (cherry picked from commit fee61dee) Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Lyude Paul 提交于
commit 7c451230 upstream. This hasn't caused any issues yet that I'm aware of, but as Ville Syrjälä pointed out - we need to make sure that intel_connector->mst_port is set before initializing MST connectors, since in theory we could potentially check intel_connector->mst_port in i915_hpd_poll_init_work() after registering the connector but before having written it's value. Signed-off-by: NLyude Paul <lyude@redhat.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20181106213017.14563-2-lyude@redhat.com (cherry picked from commit 66a5ab10) Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Chris Wilson 提交于
commit 0a823e8f upstream. Ensure that the writes into the context image are completed prior to the register mmio to trigger execution. Although previously we were assured by the SDM that all writes are flushed before an uncached memory transaction (our mmio write to submit the context to HW for execution), we have empirical evidence to believe that this is not actually the case. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108656 References: https://bugs.freedesktop.org/show_bug.cgi?id=108315 References: https://bugs.freedesktop.org/show_bug.cgi?id=106887Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Acked-by: NMika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181108081740.25615-1-chris@chris-wilson.co.uk Cc: stable@vger.kernel.org (cherry picked from commit 987abd5c) Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Chris Wilson 提交于
commit fb5bbae9 upstream. Exercising the gpu reloc path strenuously revealed an issue where the updated relocations (from MI_STORE_DWORD_IMM) were not being observed upon execution. After some experiments with adding pipecontrols (a lot of pipecontrols (32) as gen4/5 do not have a bit to wait on earlier pipe controls or even the current on), it was discovered that we merely needed to delay the EMIT_INVALIDATE by several flushes. It is important to note that it is the EMIT_INVALIDATE as opposed to the EMIT_FLUSH that needs the delay as opposed to what one might first expect -- that the delay is required for the TLB invalidation to take effect (one presumes to purge any CS buffers) as opposed to a delay after flushing to ensure the writes have landed before triggering invalidation. Testcase: igt/gem_tiled_fence_blits Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181105094305.5767-1-chris@chris-wilson.co.uk (cherry picked from commit 55f99bf2) Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Chris Wilson 提交于
commit 0014868b upstream. Since the flags are being used to operate on a u64 variable, they too need to be marked as such so that the inverses are full width (and not zero extended on 32b kernels and bdw+). Reported-by: NSergii Romantsov <sergii.romantsov@globallogic.com> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Reviewed-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181102161232.17742-2-chris@chris-wilson.co.uk (cherry picked from commit 83b466b1) Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Ville Syrjälä 提交于
commit 6a8915d0 upstream. We deinit the lpe audio device before we call drm_atomic_helper_shutdown(), which means the platform device may already be gone when it comes time to shut down the crtc. As we don't know when the last reference to the platform device gets dropped by the audio driver we can't assume that the device and its data are still around when turning off the crtc. Mark the platform device as gone as soon as we do the audio deinit. Cc: stable@vger.kernel.org Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181105194604.6994-1-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit f45a7977) Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Chris Wilson 提交于
commit 08560328 upstream. Beware mixing unsigned long constants and 64b values, as on 32b the constant will be zero extended and discard the high 32b when used as a mask! Reported-by: NSergii Romantsov <sergii.romantsov@globallogic.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108282Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: NMatthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181025091823.20571-2-chris@chris-wilson.co.uk (cherry picked from commit 6fc4e48f) Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Ville Syrjälä 提交于
commit df5e31c2 upstream. We're no longer programming any watermarks when we're disabling a pipe. That means ilk_wm_merge() & co. will keep considering the any pipe that is getting disabled as still enabled. Thus we either get no LP1+ watermakrs (ilk-ivb), or we get suboptimal ones (hsw-bdw). This seems to have been broken by commit b6b178a7 ("drm/i915: Calculate ironlake intermediate watermarks correctly, v2."). Before that we apparently had some difference between the intermediate and optimal watermarks and so we would program the optiomal ones. Now intermediate and optimal are identical for disabled pipes and so we don't program either. Fix this by programming the intermediate watermarks even for disabled pipes. We were already doing that for skl+. We'll leave out gmch platforms for now since those do the merging in a different manner and should work as is. We'll want to unify this eventually, but play it safe for now and just put in a FIXME. Cc: stable@vger.kernel.org Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: b6b178a7 ("drm/i915: Calculate ironlake intermediate watermarks correctly, v2.") Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181025130536.29024-1-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc (cherry picked from commit a748faea) Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Ville Syrjälä 提交于
commit f42f3438 upstream. Let's not leak obj->framebuffer_references when we decide that the framebuffer domensions are not suitable for NV12. Cc: stable@vger.kernel.org Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Vidya Srinivas <vidya.srinivas@intel.com> Fixes: e44134f2 ("drm/i915: Add NV12 support to intel_framebuffer_init") Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181029140031.11765-1-ville.syrjala@linux.intel.comReviewed-by: NMatt Roper <matthew.d.roper@intel.com> (cherry picked from commit 3b90946f) Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Chris Wilson 提交于
commit c5828105 upstream. Since we use a 64b virtual GTT irrespective of the system, we want to ensure that the GTT computations remains 64b even on 32b systems, including treatment of huge virtual pages. No code generation changes on 64b: Reported-by: NSergii Romantsov <sergii.romantsov@globallogic.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108282Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: NMatthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181025091823.20571-1-chris@chris-wilson.co.uk (cherry picked from commit 9125963a) Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Clint Taylor 提交于
commit 65034931 upstream. HDMI 2.0 594Mhz modes were incorrectly selecting 25.200Mhz Automatic N value mode instead of HDMI specification values. V2: Fix 88.2 Hz N value Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: NClint Taylor <clinton.a.taylor@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1540493521-1746-2-git-send-email-clinton.a.taylor@intel.com (cherry picked from commit 5a400aa3) Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-