fs: scale files_lock

Improve scalability of files_lock by adding per-cpu, per-sb files lists,
protected with an lglock. The lglock provides fast access to the per-cpu lists
to add and remove files. It also provides a snapshot of all the per-cpu lists
(although this is very slow).

One difficulty with this approach is that a file can be removed from the list
by another CPU. We must track which per-cpu list the file is on with a new
variale in the file struct (packed into a hole on 64-bit archs). Scalability
could suffer if files are frequently removed from different cpu's list.

However loads with frequent removal of files imply short interval between
adding and removing the files, and the scheduler attempts to avoid moving
processes too far away. Also, even in the case of cross-CPU removal, the
hardware has much more opportunity to parallelise cacheline transfers with N
cachelines than with 1.

A worst-case test of 1 CPU allocating files subsequently being freed by N CPUs
degenerates to contending on a single lock, which is no worse than before. When
more than one CPU are allocating files, even if they are always freed by
different CPUs, there will be more parallelism than the single-lock case.

Testing results:

On a 2 socket, 8 core opteron, I measure the number of times the lock is taken
to remove the file, the number of times it is removed by the same CPU that
added it, and the number of times it is removed by the same node that added it.

Booting:    locks=  25049 cpu-hits=  23174 (92.5%) node-hits=  23945 (95.6%)
kbuild -j16 locks=2281913 cpu-hits=2208126 (96.8%) node-hits=2252674 (98.7%)
dbench 64   locks=4306582 cpu-hits=4287247 (99.6%) node-hits=4299527 (99.8%)

So a file is removed from the same CPU it was added by over 90% of the time.
It remains within the same node 95% of the time.

Tim Chen ran some numbers for a 64 thread Nehalem system performing a compile.

                throughput
2.6.34-rc2      24.5
+patch          24.9

                us      sys     idle    IO wait (in %)
2.6.34-rc2      51.25   28.25   17.25   3.25
+patch          53.75   18.5    19      8.75

So significantly less CPU time spent in kernel code, higher idle time and
slightly higher throughput.

Single threaded performance difference was within the noise of microbenchmarks.
That is not to say penalty does not exist, the code is larger and more memory
accesses required so it will be slightly slower.

Cc: linux-kernel@vger.kernel.org
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: NNick Piggin <npiggin@kernel.dk>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

tty: fix fu_list abuse

tty code abuses fu_list, which causes a bug in remount,ro handling.

If a tty device node is opened on a filesystem, then the last link to the inode
removed, the filesystem will be allowed to be remounted readonly. This is
because fs_may_remount_ro does not find the 0 link tty inode on the file sb
list (because the tty code incorrectly removed it to use for its own purpose).
This can result in a filesystem with errors after it is marked "clean".

Taking idea from Christoph's initial patch, allocate a tty private struct
at file->private_data and put our required list fields in there, linking
file and tty. This makes tty nodes behave the same way as other device nodes
and avoid meddling with the vfs, and avoids this bug.

The error handling is not trivial in the tty code, so for this bugfix, I take
the simple approach of using __GFP_NOFAIL and don't worry about memory errors.
This is not a problem because our allocator doesn't fail small allocs as a rule
anyway. So proper error handling is left as an exercise for tty hackers.

[ Arguably filesystem's device inode would ideally be divorced from the
driver's pseudo inode when it is opened, but in practice it's not clear whether
that will ever be worth implementing. ]

Cc: linux-kernel@vger.kernel.org
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NNick Piggin <npiggin@kernel.dk>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

fs: cleanup files_lock locking

Lock tty_files with a new spinlock, tty_files_lock; provide helpers to
manipulate the per-sb files list; unexport the files_lock spinlock.

Cc: linux-kernel@vger.kernel.org
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NNick Piggin <npiggin@kernel.dk>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

fs: remove extra lookup in __lookup_hash

Optimize lookup for create operations, where no dentry should often be
common-case. In cases where it is not, such as unlink, the added overhead
is much smaller than the removed.

Also, move comments about __d_lookup racyness to the __d_lookup call site.
d_lookup is intuitive; __d_lookup is what needs commenting. So in that same
vein, add kerneldoc comments to __d_lookup and clean up some of the comments:

- We are interested in how the RCU lookup works here, particularly with
  renames. Make that explicit, and point to the document where it is explained
  in more detail.
- RCU is pretty standard now, and macros make implementations pretty mindless.
  If we want to know about RCU barrier details, we look in RCU code.
- Delete some boring legacy comments because we don't care much about how the
  code used to work, more about the interesting parts of how it works now. So
  comments about lazy LRU may be interesting, but would better be done in the
  LRU or refcount management code.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

fs: fs_struct rwlock to spinlock

struct fs_struct.lock is an rwlock with the read-side used to protect root and
pwd members while taking references to them. Taking a reference to a path
typically requires just 2 atomic ops, so the critical section is very small.
Parallel read-side operations would have cacheline contention on the lock, the
dentry, and the vfsmount cachelines, so the rwlock is unlikely to ever give a
real parallelism increase.

Replace it with a spinlock to avoid one or two atomic operations in typical
path lookup fastpath.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

fs: dentry allocation consolidation

There are 2 duplicate copies of code in dentry allocation in path lookup.
Consolidate them into a single function.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

fs: fix do_lookup false negative

In do_lookup, if we initially find no dentry, we take the directory i_mutex and
re-check the lookup. If we find a dentry there, then we revalidate it if
needed. However if that revalidate asks for the dentry to be invalidated, we
return -ENOENT from do_lookup. What should happen instead is an attempt to
allocate and lookup a new dentry.

This is probably not noticed because it is rare. It is only reached if a
concurrent create races in first (in which case, the dentry probably won't be
invalidated anyway), or if the racy __d_lookup has failed due to a
false-negative (which is very rare).

Fix this by removing code and have it use the normal reval path.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Limit the maximum number of mb_cache entries depending on the number of
hash buckets: if the only limit to the number of cache entries is the
available memory the hash chains can grow very long, taking a long time
to search.

At least partially solves https://bugzilla.lustre.org/show_bug.cgi?id=22771.
Signed-off-by: NAndreas Gruenbacher <agruen@suse.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

we want the assignment to err done inside the if () to be
visible after it, so (re)declaring err inside if () body
is wrong.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

... not harmless in this case - we have a string in the end of buffer
already.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

These flags aren't real I/O types, but tell ll_rw_block to always
lock the buffer instead of giving up on a failed trylock.

Instead add a new write_dirty_buffer helper that implements this semantic
and use it from the existing SWRITE* callers.  Note that the ll_rw_block
code had a bug where it didn't promote WRITE_SYNC_PLUG properly, which
this patch fixes.

In the ufs code clean up the helper that used to call ll_rw_block
to mirror sync_dirty_buffer, which is the function it implements for
compound buffers.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Instead of abusing a buffer_head flag just add a variant of
sync_dirty_buffer which allows passing the exact type of write
flag required.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

generic_acl_set didn't update the ctime of the file when its permission was
changed.

Steps to reproduce:
 # touch aaa
 # stat -c %Z aaa
 1275289822
 # setfacl -m  'u::x,g::x,o::x' aaa
 # stat -c %Z aaa
 1275289822                         <- unchanged

But, according to the spec of the ctime, vfs must update it.

Port of ext3 patch by Miao Xie <miaox@cn.fujitsu.com>.

CC: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Commit 77b8a75f introduced a warning at fs/inode.c:692 unlock_new_inode(),
caused by unlock_new_inode() being called on existing inodes as well.

This patch changes setup_inode() to only call unlock_new_inode() for I_NEW
inodes.
Signed-off-by: NAlexander Shishkin <virtuoso@slind.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

reiserfs_evict_inode calls end_writeback two times hitting
kernel BUG at fs/inode.c:298 becase inode->i_state is I_CLEAR already.
Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This commit makes the stack guard page somewhat less visible to user
space. It does this by:

 - not showing the guard page in /proc/<pid>/maps

   It looks like lvm-tools will actually read /proc/self/maps to figure
   out where all its mappings are, and effectively do a specialized
   "mlockall()" in user space.  By not showing the guard page as part of
   the mapping (by just adding PAGE_SIZE to the start for grows-up
   pages), lvm-tools ends up not being aware of it.

 - by also teaching the _real_ mlock() functionality not to try to lock
   the guard page.

   That would just expand the mapping down to create a new guard page,
   so there really is no point in trying to lock it in place.

It would perhaps be nice to show the guard page specially in
/proc/<pid>/maps (or at least mark grow-down segments some way), but
let's not open ourselves up to more breakage by user space from programs
that depends on the exact deails of the 'maps' file.

Special thanks to Henrique de Moraes Holschuh for diving into lvm-tools
source code to see what was going on with the whole new warning.

Reported-and-tested-by: François Valenduc <francois.valenduc@tvcablenet.be
Reported-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix parameter name in kernel-doc notation (causes a warning).
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Mark arguments to certain system calls as being const where they should be but
aren't.  The list includes:

 (*) The filename arguments of various stat syscalls, execve(), various utimes
     syscalls and some mount syscalls.

 (*) The filename arguments of some syscall helpers relating to the above.

 (*) The buffer argument of various write syscalls.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The last user is gone, so we can safely remove this
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: John Kacur <jkacur@redhat.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

logfs does not need the BKL, so use ->unlocked_ioctl instead
of ->ioctl in file operations.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJoern Engel <joern@logfs.org>
[ fixed trivial conflict ]
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

9c867fbe "partitions: fix sometimes unreadable partition strings" coverted
one line within the ibm partition code incorrectly. Fix this to get rid of
a build error.

fs/partitions/ibm.c: In function 'ibm_partition':
[...]
fs/partitions/ibm.c:185: error: too many arguments to function 'strlcat'

Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

This reverts commit 3bcf3860 (and the
accompanying commit c1e5c954 "vfs/fsnotify: fsnotify_close can delay
the final work in fput" that was a horribly ugly hack to make it work at
all).

The 'struct file' approach not only causes that disgusting hack, it
somehow breaks pulseaudio, probably due to some other subtlety with
f_count handling.

Fix up various conflicts due to later fsnotify work.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Previous patch relied on DNS_RESOLVER setting CONFIG_KEYS
but needs to be selected in NFS config when using the new
DNS resolver
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
CC: David Howells <dhowells@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Add a dummy printk function for the maintenance of unused printks through gcc
format checking, and also so that side-effect checking is maintained too.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 83ba7b07 ("writeback: simplify the write back thread queue")
broke writeback_in_progress() as in that commit we started to remove work
items from the list at the moment we start working on them and not at the
moment they are finished.  Thus if the flusher thread was doing some work
but there was no other work queued, writeback_in_progress() returned
false.  This could in particular cause unnecessary queueing of background
writeback from balance_dirty_pages() or writeout work from
writeback_sb_if_idle().

This patch fixes the problem by introducing a bit in the bdi state which
indicates that the flusher thread is processing some work and uses this
bit for writeback_in_progress() test.

NOTE: Both callsites of writeback_in_progress() (namely,
writeback_inodes_sb_if_idle() and balance_dirty_pages()) would actually
need a different information than what writeback_in_progress() provides.
They would need to know whether *the kind of writeback they are going to
submit* is already queued.  But this information isn't that simple to
provide so let's fix writeback_in_progress() for the time being.
Signed-off-by: NJan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Acked-by: NJens Axboe <jaxboe@fusionio.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Unify the logic for kupdate and non-kupdate cases.  There won't be
starvation because the inodes requeued into b_more_io will later be
spliced _after_ the remaining inodes in b_io, hence won't stand in the way
of other inodes in the next run.

It avoids unnecessary redirty_tail() calls, hence the update of
i_dirtied_when.  The timestamp update is undesirable because it could
later delay the inode's periodic writeback, or may exclude the inode from
the data integrity sync operation (which checks timestamp to avoid extra
work and livelock).

===
How the redirty_tail() comes about:

It was a long story..  This redirty_tail() was introduced with
wbc.more_io.  The initial patch for more_io actually does not have the
redirty_tail(), and when it's merged, several 100% iowait bug reports
arised:

reiserfs:
        http://lkml.org/lkml/2007/10/23/93

jfs:
        commit 29a424f2
        JFS: clear PAGECACHE_TAG_DIRTY for no-write pages

ext2:
        http://www.spinics.net/linux/lists/linux-ext4/msg04762.html

They are all old bugs hidden in various filesystems that become "visible"
with the more_io patch.  At the time, the ext2 bug is thought to be
"trivial", so not fixed.  Instead the following updated more_io patch with
redirty_tail() is merged:

	http://www.spinics.net/linux/lists/linux-ext4/msg04507.html

This will in general prevent 100% on ext2 and possibly other unknown FS bugs.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Michael Rubin <mrubin@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This was not a bug, since b_io is empty for kupdate writeback.  The next
patch will do requeue_io() for non-kupdate writeback, so let's fix it.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Michael Rubin <mrubin@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Avoid delaying writeback for an expire inode with lots of dirty pages, but
no active dirtier at the moment.  Previously we only do that for the
kupdate case.

Any filesystem that does delayed allocation or unwritten extent conversion
after IO completion will cause this - for example, XFS.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Acked-by: NJan Kara <jack@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Split get_dirty_limits() into global_dirty_limits()+bdi_dirty_limit(), so
that the latter can be avoided when under global dirty background
threshold (which is the normal state for most systems).
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Implement the ability for the root directory of a mounted AFS filesystem to
accept lookups of arbitrary directory names, to interpet the names as the names
of cells, to look the cell names up in the DNS for AFSDB records and to mount
the root.cell volume of the nominated cell on the pseudo-directory created by
lookup.

This facility is requested by passing:

	-o autocell

to the mountpoint for which this is desired, usually the /afs mount.

To use this facility, a DNS upcall program is required for AFSDB records.  This
can be obtained from:

	http://people.redhat.com/~dhowells/afs/dns.afsdb.c

It should be compiled with -lresolv and -lkeyutils and installed as, say:

	/usr/sbin/dns.afsdb

Then the following line needs to be added to /sbin/request-key.conf:

	create	dns_resolver afsdb:*	*	/usr/sbin/dns.afsdb %k

This can be tested by mounting AFS, say:

	insmod dns_resolver.ko
	insmod af-rxrpc.ko
	insmod kafs.ko rootcell=grand.central.org
	mount -t afs "#grand.central.org:root.cell." /afs -o autocell

and doing:

	ls /afs/grand.central.org/

which should show:

	archive/  cvs/  doc/  local/  project/  service/  software/  user/  www/

if it works.
Signed-off-by: NWang Lei <wang840925@gmail.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

If the DNS server returns an error, allow that to be cached in the DNS resolver
key in lieu of a value.  Userspace passes the desired error number as an option
in the payload:

	"#dnserror=<number>"

Userspace must map h_errno from the name resolution routines to an appropriate
Linux error before passing it up.  Something like the following mapping is
recommended:

	[HOST_NOT_FOUND]	= ENODATA,
	[TRY_AGAIN]		= EAGAIN,
	[NO_RECOVERY]		= ECONNREFUSED,
	[NO_DATA]		= ENODATA,

in lieu of Linux errors specifically for representing name service errors.  The
filesystem must map these errors appropropriately before passing them to
userspace.  AFS is made to map ENODATA and EAGAIN to EDESTADDRREQ for the
return to userspace; ECONNREFUSED is allowed to stand as is.

The error can be seen in /proc/keys as a negative number after the description
of the key.  Compare, for example, the following key entries:

2f97238c I--Q--     1  53s 3f010000     0     0 dns_resol afsdb:grand.centrall.org: -61
338bfbbe I--Q--     1  59m 3f010000     0     0 dns_resol afsdb:grand.central.org: 37

If the error option is supplied in the payload, the main part of the payload is
discarded.  The key should have an expiry time set by userspace.
Signed-off-by: NWang Lei <wang840925@gmail.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Use the kernel DNS resolver to translate hostnames to IP addresses.  Create a
new config option to choose between the legacy DNS resolver and the new
resolver.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Acked-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Signed-off-by: NSuresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

This adds byte order autodetection (of PDP-11 and LE filesystems).  No
attempt is made to detect big-endian filesystems -- were there any?
Tested with PDP-11 v7 filesystems and PC-IX maintenance floppy.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NLubomir Rintel <lkundrak@v3.sk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Newly mkfs-ed filesystems from Seventh Edition have last modification time
set to zero, but are otherwise perfectly valid.

Also, tighten up other sanity checks to filter out most filesystems with

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NLubomir Rintel <lkundrak@v3.sk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

So that the module gets autoloaded when a v7 filesystem is mounted.
Signed-off-by: NLubomir Rintel <lkundrak@v3.sk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We can clean up the work queue on this error path.  This function is
called from afs_init().
Signed-off-by: NDan Carpenter <error27@gmail.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix this garbage happening quite often:

==>	 sda:
	scsi 3:0:0:0: CD-ROM            TOSHIBA
==>	 sda1 sda2 sda3 sda4 <sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
			    ^^^
	Uniform CD-ROM driver Revision: 3.20
	sr 3:0:0:0: Attached scsi CD-ROM sr0
==>	 sda5 sda6 sda7 >

Make "sda: sda1 ..." lines actually lines.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since the entire fs/proc directory is conditionally included based on
CONFIG_PROC_FS, it's redundant to check that same variable within that
directory.
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If signalfd is used to consume a signal generated by a POSIX interval
timer or POSIX message queue, the ssi_int field does not reflect the data
(sigevent->sigev_value) supplied to timer_create(2) or mq_notify(3).  (The
ssi_ptr field, however, is filled in.)

This behavior differs from signalfd's treatment of sigqueue-generated
signals -- see the default case in signalfd_copyinfo.  It also gives
results that differ from the case when a signal is handled conventionally
via a sigaction-registered handler.

So, set signalfd_siginfo->ssi_int in the remaining cases (__SI_TIMER,
__SI_MESGQ) where ssi_ptr is set.

akpm: a non-back-compatible change.  Merge into -stable to minimise the
number of kernels which are in the field and which miss this feature.
Signed-off-by: NNathan Lynch <ntl@pobox.com>
Acked-by: NDavide Libenzi <davidel@xmailserver.org>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>