- 23 2月, 2014 14 次提交
-
-
由 Micky Ching 提交于
If the host driver removed while card in the slot, the host will not power off card power correctly. This bug is produced because host eject flag set before the last mmc_set_ios callback, we should set the eject flag after power off. Signed-off-by: NMicky Ching <micky_ching@realsil.com.cn> Signed-off-by: NChris Ball <chris@printf.net>
-
由 Micky Ching 提交于
Add support for realtek rts5250 pci card reader. The card reader has some problems with DDR50 mode, so add a new quirks2 for broken ddr50. Signed-off-by: NMicky Ching <micky_ching@realsil.com.cn> Signed-off-by: NChris Ball <chris@printf.net>
-
由 Jarkko Nikula 提交于
This patch adds the erase capability to OMAP1/OMAP2420 MMC driver. Idea is the same than in commit 93caf8e6 ("omap_hsmmc: add erase capability") that we disable the data timeout interrupt for erases. Signed-off-by: NJarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: NTony Lindgren <tony@atomide.com> Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: NChris Ball <chris@printf.net>
-
由 Jarkko Nikula 提交于
Because use_dma is set only in mmc_omap_probe and unset nowhere there is no need to carry that flag in struct mmc_omap_host for mmc_omap_prepare_data function. Signed-off-by: NJarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: NTony Lindgren <tony@atomide.com> Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: NChris Ball <chris@printf.net>
-
由 Jarkko Nikula 提交于
Simplify probe and cleanup code by using devm_ioremap_resource. This also makes probe code to follow more common allocate private struct followed by other initialization style. Signed-off-by: NJarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: NTony Lindgren <tony@atomide.com> Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: NChris Ball <chris@printf.net>
-
由 Jarkko Nikula 提交于
Field mem_res in struct mmc_omap_host is used only once in mmc_omap_probe when setting the phys_base field so we may just se the phys_base straight and remove needless mem_res. Signed-off-by: NJarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: NTony Lindgren <tony@atomide.com> Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: NChris Ball <chris@printf.net>
-
由 Jarkko Nikula 提交于
host-irq is set twice so remove needless one. Signed-off-by: NJarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: NTony Lindgren <tony@atomide.com> Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: NChris Ball <chris@printf.net>
-
由 Jarkko Nikula 提交于
Signed-off-by: NJarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: NTony Lindgren <tony@atomide.com> Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: NChris Ball <chris@printf.net>
-
由 Jarkko Nikula 提交于
Omap MMC driver initialization can cause a NULL pointer dereference in tasklet_hi_action on Nokia N810 if its miniSD cover is open during driver initialization. [ 1.070000] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 1.080000] pgd = c0004000 [ 1.080000] [00000000] *pgd=00000000 [ 1.080000] Internal error: Oops: 80000005 [#1] PREEMPT ARM [ 1.080000] Modules linked in: [ 1.080000] CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 3.13.0-rc2+ #95 [ 1.080000] Workqueue: events menelaus_work [ 1.080000] task: c7863340 ti: c7878000 task.ti: c7878000 [ 1.080000] PC is at 0x0 [ 1.080000] LR is at tasklet_hi_action+0x68/0xa4 ... [ 1.080000] [<c003543c>] (tasklet_hi_action+0x68/0xa4) from [<c0034dd0>] (__do_softirq+0xbc/0x208) [ 1.080000] [<c0034dd0>] (__do_softirq+0xbc/0x208) from [<c003521c>] (irq_exit+0x84/0xac) [ 1.080000] [<c003521c>] (irq_exit+0x84/0xac) from [<c00135cc>] (handle_IRQ+0x64/0x84) [ 1.080000] [<c00135cc>] (handle_IRQ+0x64/0x84) from [<c000859c>] (omap2_intc_handle_irq+0x54/0x68) [ 1.080000] [<c000859c>] (omap2_intc_handle_irq+0x54/0x68) from [<c0015be0>] (__irq_svc+0x40/0x74) [ 1.080000] Exception stack(0xc7879d70 to 0xc7879db8) [ 1.080000] 9d60: 000003f1 0000000a 00000009 0000001c [ 1.080000] 9d80: c7879e70 c780bc10 c780bc10 00000000 00000001 00008603 c780bc78 c7879e4e [ 1.080000] 9da0: 00000002 c7879db8 c00343b0 c0160c9c 20000113 ffffffff [ 1.080000] [<c0015be0>] (__irq_svc+0x40/0x74) from [<c0160c9c>] (__aeabi_uidiv+0x20/0x9c) [ 1.080000] [<c0160c9c>] (__aeabi_uidiv+0x20/0x9c) from [<c00343b0>] (msecs_to_jiffies+0x18/0x24) [ 1.080000] [<c00343b0>] (msecs_to_jiffies+0x18/0x24) from [<c01ec3ec>] (omap_i2c_xfer+0x30c/0x458) [ 1.080000] [<c01ec3ec>] (omap_i2c_xfer+0x30c/0x458) from [<c01e9724>] (__i2c_transfer+0x3c/0x74) [ 1.080000] [<c01e9724>] (__i2c_transfer+0x3c/0x74) from [<c01eac4c>] (i2c_transfer+0x78/0x94) [ 1.080000] [<c01eac4c>] (i2c_transfer+0x78/0x94) from [<c01eb0bc>] (i2c_smbus_xfer+0x3c0/0x4f8) [ 1.080000] [<c01eb0bc>] (i2c_smbus_xfer+0x3c0/0x4f8) from [<c01eb414>] (i2c_smbus_write_byte_data+0x34/0x3c) [ 1.080000] [<c01eb414>] (i2c_smbus_write_byte_data+0x34/0x3c) from [<c01bb308>] (menelaus_write_reg+0x1c/0x40) [ 1.080000] [<c01bb308>] (menelaus_write_reg+0x1c/0x40) from [<c01bb904>] (menelaus_work+0xa0/0xc4) [ 1.080000] [<c01bb904>] (menelaus_work+0xa0/0xc4) from [<c00439c4>] (process_one_work+0x1fc/0x334) [ 1.080000] [<c00439c4>] (process_one_work+0x1fc/0x334) from [<c0043d6c>] (worker_thread+0x244/0x380) [ 1.080000] [<c0043d6c>] (worker_thread+0x244/0x380) from [<c0049d04>] (kthread+0xc0/0xd4) [ 1.080000] [<c0049d04>] (kthread+0xc0/0xd4) from [<c0012758>] (ret_from_fork+0x14/0x3c) [ 1.080000] Code: bad PC value [ 1.090000] ---[ end trace 7bc2fc7cd14f1d95 ]--- [ 1.100000] Kernel panic - not syncing: Fatal exception in interrupt Reason for this is that omap_notify_cover_event which calls tasklet_hi_schedule gets called before struct cover_tasklet is initialized. Call to omap_notify_cover_event on Nokia N810 happens from menelaus.c PMIC driver via board-n8x0.c during execution of mmc_add_host in case of open miniSD cover. Fix this by moving cover_timer and cover_tasklet initialization before mmc_add_host call in mmc_omap_new_slot. Signed-off-by: NJarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: NTony Lindgren <tony@atomide.com> Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: NChris Ball <chris@printf.net>
-
由 Kuninori Morimoto 提交于
This patch adds DT support for r8a7791. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: NSimon Horman <horms+renesas@verge.net.au> Signed-off-by: NChris Ball <chris@printf.net>
-
由 Kuninori Morimoto 提交于
This patch updates r8a7790 DT data to have SoC specific settings. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: NSimon Horman <horms+renesas@verge.net.au> Signed-off-by: NChris Ball <chris@printf.net>
-
由 Kuninori Morimoto 提交于
This patch updates r8a7779 DT data to have SoC specific settings. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: NSimon Horman <horms+renesas@verge.net.au> Signed-off-by: NChris Ball <chris@printf.net>
-
由 Kuninori Morimoto 提交于
This patch updates r8a7778 DT data to have SoC specific settings. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: NSimon Horman <horms+renesas@verge.net.au> Signed-off-by: NChris Ball <chris@printf.net>
-
由 Kuninori Morimoto 提交于
It is easier to read if sh_mobile_sdhi_of_cfg and sh_mobile_sdhi_of_match are closer. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: NSimon Horman <horms+renesas@verge.net.au> Signed-off-by: NChris Ball <chris@printf.net>
-
- 14 2月, 2014 10 次提交
-
-
由 Ulf Hansson 提交于
There are no reason to why the use of a non-volatile internal eMMC cache should be controlled by a host cap. Instead let's just enable it if the eMMC card supports it. Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org> Acked-by: NSeungwon Jeon <tgih.jun@samsung.com> Signed-off-by: NChris Ball <chris@printf.net>
-
由 Ulf Hansson 提交于
Earlier we disabled the cache during suspend, which meant a flush was internally at the eMMC performed as well. To simplify code we can make use of the mmc_flush_cache(), during mmc suspend, which makes the mmc_cache_ctrl() redundant so then we can remove it. Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org> Acked-by: NSeungwon Jeon <tgih.jun@samsung.com> Signed-off-by: NChris Ball <chris@printf.net>
-
由 Ulf Hansson 提交于
There are no active users of this host capability. The primary reason for adding this cap was due to a bug in ux500 boot loader code, which is not a relevant issue any more. So, let's remove it. Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NChris Ball <chris@printf.net>
-
由 Ulf Hansson 提交于
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NChris Ball <chris@printf.net>
-
由 Ulf Hansson 提交于
There is no need for keeping a host cap for MMC_CAP2_SANITIZE, instead we just make the feature default available. Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NChris Ball <chris@printf.net>
-
由 Ulf Hansson 提交于
Due to the removal of the Kconfig option MMC_UNSAFE_RESUME, several validations of a present bus_ops callback became redundant. Let's remove these. Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NChris Ball <chris@printf.net>
-
由 Ulf Hansson 提交于
Invoking system suspend or shutdown without using the Kconfig option MMC_UNSAFE_RESUME, did trigger an ungraceful power cut of the card. To improve the situation, change the behavior to always make use of the available bus_ops callbacks that handles system suspend and shutdown properly. By changing the behavior MMC_UNSAFE_RESUME becomes redundant, so lets's remove it. Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NChris Ball <chris@printf.net>
-
由 Ulf Hansson 提交于
Since the users of the exported PM functions are now using the modern PM ops macros, we can convert to the proper corresponding PM configs. Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org> Acked-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NChris Ball <chris@printf.net>
-
由 Ulf Hansson 提交于
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org> Acked-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NChris Ball <chris@printf.net>
-
由 Ulf Hansson 提交于
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org> Acked-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NChris Ball <chris@printf.net>
-
- 10 2月, 2014 8 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security由 Linus Torvalds 提交于
Pull SELinux fixes from James Morris. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: SELinux: Fix kernel BUG on empty security contexts. selinux: add SOCK_DIAG_BY_FAMILY to the list of netlink message types
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs fixes from Al Viro: "A couple of fixes, both -stable fodder. The O_SYNC bug is fairly old..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix a kmap leak in virtio_console fix O_SYNC|O_APPEND syncing the wrong range on write()
-
-
由 Al Viro 提交于
While we are at it, don't do kmap() under kmap_atomic(), *especially* for a page we'd allocated with GFP_KERNEL. It's spelled "page_address", and had that been more than that, we'd have a real trouble - kmap_high() can block, and doing that while holding kmap_atomic() is a Bad Idea(tm). Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
It actually goes back to 2004 ([PATCH] Concurrent O_SYNC write support) when sync_page_range() had been introduced; generic_file_write{,v}() correctly synced pos_after_write - written .. pos_after_write - 1 but generic_file_aio_write() synced pos_before_write .. pos_before_write + written - 1 instead. Which is not the same thing with O_APPEND, obviously. A couple of years later correct variant had been killed off when everything switched to use of generic_file_aio_write(). All users of generic_file_aio_write() are affected, and the same bug has been copied into other instances of ->aio_write(). The fix is trivial; the only subtle point is that generic_write_sync() ought to be inlined to avoid calculations useless for the majority of calls. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fixes from Chris Mason: "This is a small collection of fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix data corruption when reading/updating compressed extents Btrfs: don't loop forever if we can't run because of the tree mod log btrfs: reserve no transaction units in btrfs_ioctl_set_features btrfs: commit transaction after setting label and features Btrfs: fix assert screwup for the pending move stuff
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "Tooling fixes, mostly related to the KASLR fallout, but also other fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf buildid-cache: Check relocation when checking for existing kcore perf tools: Adjust kallsyms for relocated kernel perf tests: No need to set up ref_reloc_sym perf symbols: Prevent the use of kcore if the kernel has moved perf record: Get ref_reloc_sym from kernel map perf machine: Set up ref_reloc_sym in machine__create_kernel_maps() perf machine: Add machine__get_kallsyms_filename() perf tools: Add kallsyms__get_function_start() perf symbols: Fix symbol annotation for relocated kernel perf tools: Fix include for non x86 architectures perf tools: Fix AAAAARGH64 memory barriers perf tools: Demangle kernel and kernel module symbols too perf/doc: Remove mention of non-existent set_perf_event_pending() from design.txt
-
- 09 2月, 2014 8 次提交
-
-
When using a mix of compressed file extents and prealloc extents, it is possible to fill a page of a file with random, garbage data from some unrelated previous use of the page, instead of a sequence of zeroes. A simple sequence of steps to get into such case, taken from the test case I made for xfstests, is: _scratch_mkfs _scratch_mount "-o compress-force=lzo" $XFS_IO_PROG -f -c "pwrite -S 0x06 -b 18670 266978 18670" $SCRATCH_MNT/foobar $XFS_IO_PROG -c "falloc 26450 665194" $SCRATCH_MNT/foobar $XFS_IO_PROG -c "truncate 542872" $SCRATCH_MNT/foobar $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foobar This results in the following file items in the fs tree: item 4 key (257 INODE_ITEM 0) itemoff 15879 itemsize 160 inode generation 6 transid 6 size 542872 block group 0 mode 100600 item 5 key (257 INODE_REF 256) itemoff 15863 itemsize 16 inode ref index 2 namelen 6 name: foobar item 6 key (257 EXTENT_DATA 0) itemoff 15810 itemsize 53 extent data disk byte 0 nr 0 gen 6 extent data offset 0 nr 24576 ram 266240 extent compression 0 item 7 key (257 EXTENT_DATA 24576) itemoff 15757 itemsize 53 prealloc data disk byte 12849152 nr 241664 gen 6 prealloc data offset 0 nr 241664 item 8 key (257 EXTENT_DATA 266240) itemoff 15704 itemsize 53 extent data disk byte 12845056 nr 4096 gen 6 extent data offset 0 nr 20480 ram 20480 extent compression 2 item 9 key (257 EXTENT_DATA 286720) itemoff 15651 itemsize 53 prealloc data disk byte 13090816 nr 405504 gen 6 prealloc data offset 0 nr 258048 The on disk extent at offset 266240 (which corresponds to 1 single disk block), contains 5 compressed chunks of file data. Each of the first 4 compress 4096 bytes of file data, while the last one only compresses 3024 bytes of file data. Therefore a read into the file region [285648 ; 286720[ (length = 4096 - 3024 = 1072 bytes) should always return zeroes (our next extent is a prealloc one). The solution here is the compression code path to zero the remaining (untouched) bytes of the last page it uncompressed data into, as the information about how much space the file data consumes in the last page is not known in the upper layer fs/btrfs/extent_io.c:__do_readpage(). In __do_readpage we were correctly zeroing the remainder of the page but only if it corresponds to the last page of the inode and if the inode's size is not a multiple of the page size. This would cause not only returning random data on reads, but also permanently storing random data when updating parts of the region that should be zeroed. For the example above, it means updating a single byte in the region [285648 ; 286720[ would store that byte correctly but also store random data on disk. A test case for xfstests follows soon. Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: NChris Mason <clm@fb.com>
-
由 Josef Bacik 提交于
A user reported a 100% cpu hang with my new delayed ref code. Turns out I forgot to increase the count check when we can't run a delayed ref because of the tree mod log. If we can't run any delayed refs during this there is no point in continuing to look, and we need to break out. Thanks, Signed-off-by: NJosef Bacik <jbacik@fb.com> Signed-off-by: NChris Mason <clm@fb.com>
-
由 David Sterba 提交于
Added in patch "btrfs: add ioctls to query/change feature bits online" modifications to superblock don't need to reserve metadata blocks when starting a transaction. Signed-off-by: NDavid Sterba <dsterba@suse.cz> Signed-off-by: NChris Mason <clm@fb.com>
-
由 Jeff Mahoney 提交于
The set_fslabel ioctl uses btrfs_end_transaction, which means it's possible that the change will be lost if the system crashes, same for the newly set features. Let's use btrfs_commit_transaction instead. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.cz> Signed-off-by: NChris Mason <clm@fb.com>
-
由 Josef Bacik 提交于
Wang noticed that he was failing btrfs/030 even though me and Filipe couldn't reproduce. Turns out this is because Wang didn't have CONFIG_BTRFS_ASSERT set, which meant that a key part of Filipe's original patch was not being built in. This appears to be a mess up with merging Filipe's patch as it does not exist in his original patch. Fix this by changing how we make sure del_waiting_dir_move asserts that it did not error and take the function out of the ifdef check. This makes btrfs/030 pass with the assert on or off. Thanks, Signed-off-by: NJosef Bacik <jbacik@fb.com> Reviewed-by: NFilipe Manana <fdmanana@gmail.com> Signed-off-by: NChris Mason <clm@fb.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl由 Linus Torvalds 提交于
Pull pinctrl fixes from Linus Walleij: "First round of pin control fixes for v3.14: - Protect pinctrl_list_add() with the proper mutex. This was identified by RedHat. Caused nasty locking warnings was rootcased by Stanislaw Gruszka. - Avoid adding dangerous debugfs files when either half of the subsystem is unused: pinmux or pinconf. - Various fixes to various drivers: locking, hardware particulars, DT parsing, error codes" * tag 'pinctrl-v3.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: tegra: return correct error type pinctrl: do not init debugfs entries for unimplemented functionalities pinctrl: protect pinctrl_list add pinctrl: sirf: correct the pin index of ac97_pins group pinctrl: imx27: fix offset calculation in imx_read_2bit pinctrl: vt8500: Change devicetree data parsing pinctrl: imx27: fix wrong offset to ICONFB pinctrl: at91: use locked variant of irq_set_handler
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq fix from Thomas Gleixner: "Add a missing Kconfig dependency" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Generic irq chip requires IRQ_DOMAIN
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Peter Anvin: "Quite a varied little collection of fixes. Most of them are relatively small or isolated; the biggest one is Mel Gorman's fixes for TLB range flushing. A couple of AMD-related fixes (including not crashing when given an invalid microcode image) and fix a crash when compiled with gcov" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, microcode, AMD: Unify valid container checks x86, hweight: Fix BUG when booting with CONFIG_GCOV_PROFILE_ALL=y x86/efi: Allow mapping BGRT on x86-32 x86: Fix the initialization of physnode_map x86, cpu hotplug: Fix stack frame warning in check_irq_vectors_for_cpu_disable() x86/intel/mid: Fix X86_INTEL_MID dependencies arch/x86/mm/srat: Skip NUMA_NO_NODE while parsing SLIT mm, x86: Revisit tlb_flushall_shift tuning for page flushes except on IvyBridge x86: mm: change tlb_flushall_shift for IvyBridge x86/mm: Eliminate redundant page table walk during TLB range flushing x86/mm: Clean up inconsistencies when flushing TLB ranges mm, x86: Account for TLB flushes only when debugging x86/AMD/NB: Fix amd_set_subcaches() parameter type x86/quirks: Add workaround for AMD F16h Erratum792 x86, doc, kconfig: Fix dud URL for Microcode data
-