- 17 7月, 2014 6 次提交
-
-
由 Geir Ola Vaagland 提交于
This patch implements section 5.3.4. of RFC6458, that is, support for 'SCTP Send Information Structure' (SCTP_SNDINFO) which can be placed into ancillary data cmsghdr structure for sendmsg() calls. The sctp_sndinfo structure is defined as per RFC as below ... struct sctp_sndinfo { uint16_t snd_sid; uint16_t snd_flags; uint32_t snd_ppid; uint32_t snd_context; sctp_assoc_t snd_assoc_id; }; ... and supplied under cmsg_level IPPROTO_SCTP, cmsg_type SCTP_SNDINFO, while cmsg_data[] contains struct sctp_sndinfo. An sctp_sndinfo item always corresponds to the data in msg_iov. Joint work with Daniel Borkmann. Signed-off-by: NGeir Ola Vaagland <geirola@gmail.com> Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.infradead.org/linux-mtd由 Linus Torvalds 提交于
Pull MTD fixes from Brian Norris: - Fix ELM suspend/resume - Reduce warnings if NAND ECC is too weak - Add CFI support for Sharp LH28F640BF NOR The last fix is coming in because other commits in the 3.16 cycle depended on this support. * tag 'for-linus-20140716' of git://git.infradead.org/linux-mtd: mtd: cfi_cmdset_0001.c: add support for Sharp LH28F640BF NOR mtd: nand: reduce the warning noise when the ECC is too weak mtd: devices: elm: fix elm_context_save() and elm_context_restore() functions
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler fixes from Ingo Molnar: "A cpufreq lockup fix and a compiler warning fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix compiler warnings x86, tsc: Fix cpufreq lockup
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "Tooling fixes and an Intel PMU driver fixlet" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Do not allow optimized switch for non-cloned events perf/x86/intel: ignore CondChgd bit to avoid false NMI handling perf symbols: Get kernel start address by symbol name perf tools: Fix segfault in cumulative.callchain report
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "Things seem to calm down so far, just a small few HD-audio fixes (regression fixes and a new codec ID addition) popping up" * tag 'sound-3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix broken PM due to incomplete i915 initialization ALSA: hda - Revert stream assignment order for Intel controllers ALSA: hda - Add new GPU codec ID 0x10de0070 to snd-hda ALSA: hda: Fix build warning
-
- 16 7月, 2014 34 次提交
-
-
由 David S. Miller 提交于
Veaceslav Falico says: ==================== bonding: convert pr_* to netdev_* Currently bonding uses pr_info/warn/etc. function to print something, while it's encouraged to use netdev_info/warn/etc. in net/. This patchset converts them where possible (i.e. where we have a working net_device). Also, convert pr_ratelimit* to net_() and remove the pr_fmt, to unify netdev_* and pr_* outputs. ==================== CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NVeaceslav Falico <vfalico@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Veaceslav Falico 提交于
To maintain the same message structure as netdev_* functions print. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NVeaceslav Falico <vfalico@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Veaceslav Falico 提交于
CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NVeaceslav Falico <vfalico@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Veaceslav Falico 提交于
CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NVeaceslav Falico <vfalico@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Veaceslav Falico 提交于
To maintain the same message structure as netdev_* functions print. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NVeaceslav Falico <vfalico@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Veaceslav Falico 提交于
CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NVeaceslav Falico <vfalico@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Veaceslav Falico 提交于
One occurance left intact as it's unrelated to net_device. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NVeaceslav Falico <vfalico@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Veaceslav Falico 提交于
To maintain the same message structure as netdev_* functions print. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NVeaceslav Falico <vfalico@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Veaceslav Falico 提交于
CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NVeaceslav Falico <vfalico@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Veaceslav Falico 提交于
To maintain the same message structure as netdev_* functions print. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NVeaceslav Falico <vfalico@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Veaceslav Falico 提交于
Several functions left out cause we might not have at that time a valid bond/slave/port. Also, converted severa pr_ratelimited into net_ratelimited. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NVeaceslav Falico <vfalico@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Veaceslav Falico 提交于
To maintain the same message structure as netdev_* functions print. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NVeaceslav Falico <vfalico@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Veaceslav Falico 提交于
Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NVeaceslav Falico <vfalico@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mugunthan V N 提交于
instead of return error on zero rx_coalesce_usecs, disable coalesce Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
During the conversion to "static" functions this one got left out, only its prototype was converted, thus resulting in: drivers/net/bonding//bond_options.c:674:5: warning: symbol 'bond_option_mode_set' was not declared. Should it be static? Fix it by making it static and also break the line in two as it was too long. CC: Stephen Hemminger <stephen@networkplumber.org> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: David S. Miller <davem@davemloft.net> Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Veaceslav Falico 提交于
Currently we exit if the slave isn't the first slave, doesn't support mac address setting and fail_over_mac isn't FOM_ACTIVE. It's wrong because we only require ndo_set_mac_address in case bonding is in active-backup mode and FOM isn't FOM_ACTIVE. To fix this - only exit with an error if we're in a/b mode and have fail_over_mac != FOM_ACTIVE. Also, maintain current behaviour on the first slave (forcibly change fom to FOM_ACTIVE) to not break anyone's configuration. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NVeaceslav Falico <vfalico@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Edward Cree 提交于
Added a counter rx_noskb_drop for failure to allocate an skb. Summed the per-channel rx_nodesc_trunc counters earlier so that they can be included in rx_dropped. Signed-off-by: NEdward Cree <ecree@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christoph Schulz 提交于
If using a demand-dialled PPP unit for a PPP multilink master, the pppd daemon needs to reset the sequence counter between two connections. This allows the daemon to reuse the PPP unit instead of destroying and recreating it. As there is no API to reset the counter, this patch resets the counter whenever the SC_MULTILINK flag is set. Signed-off-by: NChristoph Schulz <develop@kristov.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs由 Linus Torvalds 提交于
Pull quota fix from Jan Kara: "Fix locking of dquot shrinker" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: quota: missing lock in dqcache_shrink_scan()
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio由 Linus Torvalds 提交于
Pull GPIO fix from Linus Walleij: "Fix up some merge confusion from the merge window" * tag 'gpio-v3.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: mcp23s08: Eliminates redundant checking.
-
由 David S. Miller 提交于
Eric Dumazet says: ==================== bonding: rcu cleanups RCU was added to bonding in linux-3.12 but lacked proper sparse annotations. Using __rcu annotation actually helps to spot all accesses to bond->curr_active_slave & cond->current_arp_slave are correctly protected, with full sparse & LOCKDEP support. Lets clean the code. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Using __rcu annotation actually helps to spot all accesses to bond->current_arp_slave are correctly protected, with LOCKDEP support. Signed-off-by: NEric Dumazet <edumazet@google.com> Reviewed-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
RCU was added to bonding in linux-3.12 but lacked proper sparse annotations. Using __rcu annotation actually helps to spot all accesses to bond->curr_active_slave are correctly protected, with LOCKDEP support. Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-by: NVeaceslav Falico <vfalico@gmail.com> Reviewed-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
curr_active_slave is rcu protected, and bonding_show_mii_status() only wants to check if pointer is NULL or not. Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-by: NVeaceslav Falico <vfalico@gmail.com> Reviewed-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Only keep bond_option_active_slave_get_rcu() helper. bond_fill_info() uses a new bond_option_active_slave_get_ifindex() helper. Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-by: NVeaceslav Falico <vfalico@gmail.com> Reviewed-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://gitorious.org/linux-can/linux-can-next由 David S. Miller 提交于
Marc Kleine-Budde says: ==================== pull-request: can-next 2014-07-15 this is a pull request of 4 patches for net-next/master. Prabhakar Lad contributes a patch that converts the c_can driver to use the devm api. The remaining four patches by Nikita Edward Baruzdin improve the SJA1000 driver with loopback testing support and introduce a new testing mode presume ack, for successful transmission even if no ACK is received. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Willem de Bruijn 提交于
The SO_TIMESTAMPING API defines option SOF_TIMESTAMPING_SYS_HW. This feature is deprecated. It should not be implemented by new device drivers. Existing drivers do not implement it, either -- with one exception. Driver developers are encouraged to expose the NIC hw clock as a PTP HW clock source, instead, and synchronize system time to the HW source. The control flag cannot be removed due to being part of the ABI, nor can the structure scm_timestamping that is returned. Due to the one legacy driver, the internal datapath and structure are not removed. This patch only clearly marks the interface as deprecated. Device drivers should always return a syststamp value of zero. Signed-off-by: NWillem de Bruijn <willemb@google.com> ---- We can consider adding a WARN_ON_ONCE in__sock_recv_timestamp if non-zero syststamp is encountered Acked-by: NRichard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Willem de Bruijn 提交于
Add SO_TIMESTAMPING to sockets of type PF_INET[6]/SOCK_RAW: Add the necessary sock_tx_timestamp calls to the datapath for RAW sockets (ping sockets already had these calls). Fix the IP output path to pass the timestamp flags on the first fragment also for these sockets. The existing code relies on transhdrlen != 0 to indicate a first fragment. For these sockets, that assumption does not hold. This fixes http://bugzilla.kernel.org/show_bug.cgi?id=77221 Tested SOCK_RAW on IPv4 and IPv6, not PING. Signed-off-by: NWillem de Bruijn <willemb@google.com> Acked-by: NRichard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Tom Lendacky says: ==================== amd-xgbe: Remove baseT workaround for fixed speeds The following series expands the speed/duplex settings array in phy.c to support additional media types. With this expansion the workaround in the amd-xgbe driver to set/remove baseT media types based on whether auto negotiation is enabled can be removed. This patch series is based on net-next. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lendacky, Thomas 提交于
With the addition of entries in the phy speed/duplex settings array to support KR and KX mode, the work-around to add/remove baseT settings to run at a fixed speed is no longer needed. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lendacky, Thomas 提交于
Expand the phy speed/duplex settings array to support more than just baseT features. This change adds entries to support the following additional speed/duplex/media types: SUPPORTED_10000baseKR_Full SUPPORTED_10000baseKX4_Full SUPPORTED_2500baseX_Full SUPPORTED_1000baseKX_Full Additionally, it changes the 10GbE baseT entry from using the hardcoded value 10000 to the SPEED_10000 define. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Fabian Frederick says: ==================== net: remove unnecessary break after goto/return Small patchset addressing break redundancy on net branch (suggested by Joe Perches). ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabian Frederick 提交于
Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabian Frederick 提交于
Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-