- 28 10月, 2017 1 次提交
-
-
由 Vivien Didelot 提交于
The new bindings (dsa2.c) and the old bindings (legacy.c) share two helpers dsa_cpu_dsa_setup and dsa_cpu_dsa_destroy, used to register or deregister a fixed PHY if a given port has a corresponding device node. Unclutter the code by moving them into two new port.c helpers, dsa_port_fixed_link_register_of and dsa_port_fixed_link_(un)register_of. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 10月, 2017 3 次提交
-
-
由 Vivien Didelot 提交于
Now that DSA core provides port types, there is no need to keep this information at the switch level. This is a static information that is part of a DSA core dsa_port structure. Remove them. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
Introduce an enumerated type for ports, which will be way more explicit to identify a port type instead of digging into switch port masks. A port can be of type CPU, DSA, user, or unused by default. This is a static parsed information that cannot be changed at runtime. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
Introduce a dsa_user_ports() helper to return the ds->enabled_port_mask mask which is more explicit. This will also minimize diffs when touching this internal mask. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 10月, 2017 1 次提交
-
-
由 Vivien Didelot 提交于
The unapply functions are called on the error path. As for dsa_port_mask, enabled_port_mask and cpu_port_mask won't be used after so there's no need to unmask the corresponding port bit from them. This makes dsa_cpu_port_unapply() and dsa_dsa_port_unapply() identical, which can be factorized later. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 10月, 2017 1 次提交
-
-
由 Vivien Didelot 提交于
In the case of pdata, the dsa_cpu_parse function calls dev_put() before making sure it isn't NULL. Fix this. Fixes: 71e0bbde ("net: dsa: Add support for platform data") Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 10月, 2017 1 次提交
-
-
由 Vivien Didelot 提交于
The dsa_port structure has a "netdev" member, which can be used for either the master device, or the slave device, depending on its type. It is true that today, CPU port are not exposed to userspace, thus the port's netdev member can be used to point to its master interface. But it is still slightly confusing, so split it into more explicit "master" and "slave" members inside an anonymous union. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 10月, 2017 1 次提交
-
-
由 Vivien Didelot 提交于
Now that there is no user for the .set_addr function, remove it from DSA. If a switch supports this feature (like mv88e6xxx), the implementation can be done in the driver setup. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 10月, 2017 5 次提交
-
-
由 Vivien Didelot 提交于
Now that the dsa_ptr is a dsa_port instance, there is no need to keep the tag operations in the dsa_switch_tree structure. Remove it. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
With DSA, a master net device (CPU facing interface) has a dsa_ptr pointer to which hangs a dsa_switch_tree. This is not correct because a master interface is wired to a dedicated switch port, and because we can theoretically have several master interfaces pointing to several CPU ports of the same switch fabric. Change the master interface's dsa_ptr for the CPU dsa_port pointer. This is a step towards supporting multiple CPU ports. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
In preparation to make DSA master devices point to their corresponding CPU port instead of the whole tree, add copies of dst and rcv in the dsa_port structure so that we keep fast access in the receive hot path. Also keep the copies at the beginning of the dsa_port structure in order to ensure they are available in cacheline 1. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
The DSA tagging protocol operations are specific to each CPU port, thus the dsa_device_ops pointer belongs to the dsa_port structure. >From now on assign a slave's xmit copy from its CPU port tagging operations. This will ease the future support for multiple CPU ports. Also keep the tag_ops at the beginning of the dsa_port structure so that we ensure copies for hot path are in cacheline 1. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
When resolving the DSA tagging protocol used by a CPU switch, use a temporary "tag_ops" variable to store the dsa_device_ops instead of using directly dst->tag_ops. This will make the future patches moving this pointer around easier to read. There is no functional changes. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 9月, 2017 3 次提交
-
-
由 Vivien Didelot 提交于
DSA overrides the master device ethtool ops, so that it can inject stats from its dedicated switch CPU port as well. The related code is currently split in dsa.c and slave.c, but it only scopes the master net device. Move it to a new master.c DSA core file. This file will be later extented with master net device specific code. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
DSA overrides the master's ethtool ops so that we can inject its CPU port's statistics. Because of that, we need to setup the ethtool ops after the master's dsa_ptr pointer has been assigned, not before. This patch setups the ethtool ops after dsa_ptr is assigned, and restores them before it gets cleared. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
When a DSA switch tree is meant to be applied, it already has a CPU port. Thus remove the condition of dst->cpu_dp. Moreover, the next lines access dst->cpu_dp unconditionally. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 8月, 2017 1 次提交
-
-
由 Florian Fainelli 提交于
If we do not have a master network device attached dst->cpu_dp will be NULL and accessing cpu_dp->netdev will create a trace similar to the one below. The correct check is on dst->cpu_dp period. [ 1.004650] DSA: switch 0 0 parsed [ 1.008078] Unable to handle kernel NULL pointer dereference at virtual address 00000010 [ 1.016195] pgd = c0003000 [ 1.018918] [00000010] *pgd=80000000004003, *pmd=00000000 [ 1.024349] Internal error: Oops: 206 [#1] SMP ARM [ 1.029157] Modules linked in: [ 1.032228] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.13.0-rc6-00071-g45b45afab9bd-dirty #7 [ 1.040772] Hardware name: Broadcom STB (Flattened Device Tree) [ 1.046704] task: ee08f840 task.stack: ee090000 [ 1.051258] PC is at dsa_register_switch+0x5e0/0x9dc [ 1.056234] LR is at dsa_register_switch+0x5d0/0x9dc [ 1.061211] pc : [<c08fb28c>] lr : [<c08fb27c>] psr: 60000213 [ 1.067491] sp : ee091d88 ip : 00000000 fp : 0000000c [ 1.072728] r10: 00000000 r9 : 00000001 r8 : ee208010 [ 1.077965] r7 : ee2b57b0 r6 : ee2b5780 r5 : 00000000 r4 : ee208e0c [ 1.084506] r3 : 00000000 r2 : 00040d00 r1 : 2d1b2000 r0 : 00000016 [ 1.091050] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 1.098199] Control: 32c5387d Table: 00003000 DAC: fffffffd [ 1.103957] Process swapper/0 (pid: 1, stack limit = 0xee090210) Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Fixes: 6d3c8c0d ("net: dsa: Remove master_netdev and use dst->cpu_dp->netdev") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 8月, 2017 2 次提交
-
-
由 Vivien Didelot 提交于
dsa_slave_create currently takes 4 arguments while it only needs the related dsa_port and its name. Remove all other arguments. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
dsa_cpu_dsa_setup currently takes 4 arguments but they are all available from the dsa_port argument. Remove all others. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 7月, 2017 1 次提交
-
-
由 Florian Fainelli 提交于
The mt7530 driver has its dsa_switch_ops::get_tag_protocol function check ds->cpu_port_mask to issue a warning in case the configured CPU port is not capable of supporting tags. After commit 14be36c2 ("net: dsa: Initialize all CPU and enabled ports masks in dsa_ds_parse()") we slightly re-arranged the initialization such that this was no longer working. Just make sure that ds->cpu_port_mask is set prior to the first call to get_tag_protocol, thus restoring the expected contract. In case of error, the CPU port bit is cleared. Fixes: 14be36c2 ("net: dsa: Initialize all CPU and enabled ports masks in dsa_ds_parse()") Reported-by: NSean Wang <sean.wang@mediatek.com> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 6月, 2017 1 次提交
-
-
由 Vivien Didelot 提交于
The current code only assigns the default cpu_dp to all user ports of the switch to which the CPU port belongs. The user ports of the other switches of the fabric thus don't have a default CPU port. This patch fixes this by assigning the cpu_dp of all user ports of all switches of the fabric when the tree is fully parsed. Fixes: a29342e7 ("net: dsa: Associate slave network device with CPU port") Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 6月, 2017 2 次提交
-
-
由 Florian Fainelli 提交于
In preparation for supporting multiple CPU ports with DSA, have the dsa_port structure know which CPU it is associated with. This will be important in order to make sure the correct CPU is used for transmission of the frames. If not for functional reasons, for performance (e.g: load balancing) and forwarding decisions. Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
In preparation for supporting multiple CPU ports, remove dst->master_netdev and ds->master_netdev and replace them with only one instance of the common object we have for a port: struct dsa_port::netdev. ds->master_netdev is currently write only and would be helpful in the case where we have two switches, both with CPU ports, and also connected within each other, which the multi-CPU port patch series would address. While at it, introduce a helper function used in net/dsa/slave.c to immediately get a reference on the master network device called dsa_master_netdev(). Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 6月, 2017 4 次提交
-
-
由 Florian Fainelli 提交于
Commit 9520ed8f ("net: dsa: use cpu_switch instead of ds[0]") replaced the use of dst->ds[0] with dst->cpu_switch since that is functionally equivalent, however, we can now run into an use after free scenario after unbinding then rebinding the switch driver. The use after free happens because we do correctly initialize dst->cpu_switch the first time we probe in dsa_cpu_parse(), then we unbind the driver: dsa_dst_unapply() is called, and we rebind again. dst->cpu_switch now points to a freed "ds" structure, and so when we finally dereference it in dsa_cpu_port_ethtool_setup(), we oops. To fix this, simply set dst->cpu_switch to NULL in dsa_dst_unapply() which guarantees that we always correctly re-assign dst->cpu_switch in dsa_cpu_parse(). Fixes: 9520ed8f ("net: dsa: use cpu_switch instead of ds[0]") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
There was no reason for duplicating the code that initializes ds->enabled_port_mask in both dsa_parse_ports_dn() and dsa_parse_ports(), instead move this to dsa_ds_parse() which is early enough before ops->setup() has run. While at it, we can now make dsa_is_cpu_port() check ds->cpu_port_mask which is a step towards being multi-CPU port capable. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
We have all the information we need in dsa_port, so use it instead of repeating the same arguments over and over again. Suggested-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
We do not need to have a reference to a dsa_switch, instead we should pass a reference to a CPU dsa_port, change that. This is a preliminary change to better support multiple CPU ports. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 6月, 2017 1 次提交
-
-
由 Vivien Didelot 提交于
dsa_ptr is not a void pointer anymore since Nov 2011, as of cf50dcc2 ("dsa: Change dsa_uses_{dsa, trailer}_tags() into inline functions"), but an explicit dsa_switch_tree pointer, thus remove the (void *) cast. Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 6月, 2017 1 次提交
-
-
由 Vivien Didelot 提交于
The current dsa_register_switch function takes a useless struct device pointer argument, which always equals ds->dev. Drivers either call it with ds->dev, or with the same device pointer passed to dsa_switch_alloc, which ends up being assigned to ds->dev. This patch removes the second argument of the dsa_register_switch and _dsa_register_switch functions. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 5月, 2017 2 次提交
-
-
由 Vivien Didelot 提交于
The public include/net/dsa.h file is meant for DSA drivers, while all DSA core files share a common private header net/dsa/dsa_priv.h file. Ensure that dsa_priv.h is the only DSA core file to include net/dsa.h, and add a new line to separate absolute and relative headers at the same time. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
A dsa_switch_tree instance holds a dsa_switch pointer and a port index to identify the switch port to which the CPU is attached. Now that the DSA layer has a dsa_port structure to hold this data, use it to point the switch CPU port. This patch simply substitutes s/dst->cpu_switch/dst->cpu_dp->ds/ and s/dst->cpu_port/dst->cpu_dp->index/. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 3月, 2017 2 次提交
-
-
由 Andrew Lunn 提交于
Register the switch and its ports with devlink. Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Tested-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrew Lunn 提交于
There is an include loop between netdevice.h, dsa.h, devlink.h because of NETDEV_ALIGN, making it impossible to use devlink structures in dsa.h. Break this loop by taking dsa.h out of netdevice.h, add a forward declaration of dsa_switch_tree and netdev_set_default_ethtool_ops() function, which is what netdevice.h requires. No longer having dsa.h in netdevice.h means the includes in dsa.h no longer get included. This breaks a few other files which depend on these includes. Add these directly in the affected file. Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 2月, 2017 1 次提交
-
-
由 Florian Fainelli 提交于
dsa_slave_create() can fail, and dsa_user_port_unapply() will properly check for the network device not being NULL before attempting to destroy it. We were not setting the slave network device as NULL if dsa_slave_create() failed, so we would later on be calling dsa_slave_destroy() on a now free'd and unitialized network device, causing crashes in dsa_slave_destroy(). Fixes: 83c0afae ("net: dsa: Add new binding implementation") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 2月, 2017 2 次提交
-
-
由 Florian Fainelli 提交于
Allow drivers to use the new DSA API with platform data. Most of the code in net/dsa/dsa2.c does not rely so much on device_nodes and can get the same information from platform_data instead. We purposely do not support distributed configurations with platform data, so drivers should be providing a pointer to a 'struct dsa_chip_data' structure if they wish to communicate per-port layout. Multiple CPUs port could potentially be supported and dsa_chip_data is extended to receive up to one reference to an upstream network device per port described by a dsa_chip_data structure. dsa_dev_to_net_device() increments the network device's reference count, so we intentionally call dev_put() to be consistent with the DT-enabled path, until we have a generic notifier based solution. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
Add a notifier block per DSA switch, registered against a notifier head in the switch fabric they belong to. This infrastructure will allow to propagate fabric-wide events such as port bridging, VLAN configuration, etc. If a DSA switch driver cares about cross-chip configuration, such events can be caught. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 1月, 2017 3 次提交
-
-
由 Vivien Didelot 提交于
Add the physical switch instance and port index a DSA port belongs to to the dsa_port structure. That can be used later to retrieve information about a physical port when configuring a switch fabric, or lighten up struct dsa_slave_priv. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
The dsa_switch structure contains the number of ports. Use it where the structure is valid instead of the DSA_MAX_PORTS value. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
Change the ports[DSA_MAX_PORTS] array of the dsa_switch structure for a zero-length array, allocated at the same time as the dsa_switch structure itself. A dsa_switch_alloc() helper is provided for that. This commit brings no functional change yet since we pass DSA_MAX_PORTS as the number of ports for the moment. Future patches can update the DSA drivers separately to support dynamic number of ports. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 1月, 2017 1 次提交
-
-
由 Florian Fainelli 提交于
Move the assignment of ports in _dsa_register_switch() closer to where it is checked, no functional change. Re-order declarations to be preserve the inverted christmas tree style. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-