- 11 8月, 2010 36 次提交
-
-
由 TAMUKI Shoichi 提交于
To keep panic_timeout accuracy when running under a hypervisor, the current implementation only spins on long time (1 second) calls to mdelay. That brings a good effect, but the problem is the keyboard LEDs don't blink at all on that situation. This patch changes to call to panic_blink_enter() between every mdelay and keeps blinking in spite of long spin timer mode. The time to call to mdelay is now 100ms. Even this change will keep panic_timeout accuracy enough when running under a hypervisor. Signed-off-by: NTAMUKI Shoichi <tamuki@linet.gr.jp> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: NDmitry Torokhov <dtor@mail.ru> Cc: Anton Blanchard <anton@samba.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 FUJITA Tomonori 提交于
Architectures implement dma_is_consistent() in different ways (some misinterpret the definition of API in DMA-API.txt). So it hasn't been so useful for drivers. We have only one user of the API in tree. Unlikely out-of-tree drivers use the API. Even if we fix dma_is_consistent() in some architectures, it doesn't look useful at all. It was invented long ago for some old systems that can't allocate coherent memory at all. It's better to export only APIs that are definitely necessary for drivers. Let's remove this API. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 FUJITA Tomonori 提交于
dma_get_cache_alignment returns the minimum DMA alignment. Architectures defines it as ARCH_DMA_MINALIGN (formally ARCH_KMALLOC_MINALIGN). So we can unify dma_get_cache_alignment implementations. Note that some architectures implement dma_get_cache_alignment wrongly. dma_get_cache_alignment() should return the minimum DMA alignment. So fully-coherent architectures should return 1. This patch also fixes this issue. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 FUJITA Tomonori 提交于
Now each architecture has the own dma_get_cache_alignment implementation. dma_get_cache_alignment returns the minimum DMA alignment. Architectures define it as ARCH_KMALLOC_MINALIGN (it's used to make sure that malloc'ed buffer is DMA-safe; the buffer doesn't share a cache with the others). So we can unify dma_get_cache_alignment implementations. This patch: dma_get_cache_alignment() needs to know if an architecture defines ARCH_KMALLOC_MINALIGN or not (needs to know if architecture has DMA alignment restriction). However, slab.h define ARCH_KMALLOC_MINALIGN if architectures doesn't define it. Let's rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN. ARCH_KMALLOC_MINALIGN is used only in the internals of slab/slob/slub (except for crypto). Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Maurus Cuelenaere 提交于
Since "s3c-fb: Automatically calculate pixel clock when none is given", there's no need for manually calculating the pixel clock anymore so remove these lines and add the correct refresh rate where appropriately. Signed-off-by: NMaurus Cuelenaere <mcuelenaere@gmail.com> Cc: Pawel Osciak <p.osciak@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pawel Osciak 提交于
S5PV210 SoCs allow enabling/disabling DMA channels per window. For a window to display data from framebuffer memory, its channel has to be enabled. Signed-off-by: NPawel Osciak <p.osciak@samsung.com> Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pawel Osciak 提交于
S5PV210 allows per-window locking of register value updates from shadow registers. Signed-off-by: NPawel Osciak <p.osciak@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pawel Osciak 提交于
Add VSYNC interrupt support and an ioctl that allows waiting for it. Interrupts are turned on only when needed. Signed-off-by: NPawel Osciak <p.osciak@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pawel Osciak 提交于
Supports all bpp modes. The PRTCON register is used to disable in-hardware updates of registers that store start and end addresses of framebuffer memory. This prevents display corruption in case we do not make it before VSYNC with updating them atomically. With this feature there is no need to wait for a VSYNC interrupt before each such update. Signed-off-by: NPawel Osciak <p.osciak@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pawel Osciak 提交于
Add framebuffer device name initialization calls for S3C2443, S3C64xx and S5P machines. Signed-off-by: NPawel Osciak <p.osciak@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pawel Osciak 提交于
FRAMESEL1 bitfield starts on 13th bit, not on 14th. Signed-off-by: NPawel Osciak <p.osciak@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NBen Dooks <ben-linux@fluff.org> Cc: InKi Dae <inki.dae@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ben Dooks 提交于
Remove the palette setup code from the header files and put it into the main driver. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NPawel Osciak <p.osciak@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: KyungMin Park <kyungmin.park.samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ben Dooks 提交于
Update the variant and window variant structures with the necessary changes to support the older style of hardware where these are not in the same place. Add the support for the s3c2443/s3c2416 hardware by using the platform-device s3c2443 to cover both, and add the initialisation data for these. Also change to including just the v4 header files for the moment until the last of the merging of these is sorted out. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NPawel Osciak <p.osciak@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: KyungMin Park <kyungmin.park.samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ben Dooks 提交于
Remove the various header files that configure this driver and use the platform device name to select the correct configuration at probe time. Currently this does not remove the header files, only updates the driver and the relevant platform files. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NPawel Osciak <p.osciak@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: KyungMin Park <kyungmin.park.samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 InKi Dae 提交于
It has been working fine at 16bpp but in case of pixel format more then 24bpp it would occur distortedness situation on that mode. so this patch set the word swap control bit of WINCONx to 1 as default value. but it should be set to 0 in case that each ENLOCAL bit of WINCON0 ~ 2 registers is enabled. this issue would be solved with local path feature soon. Signed-off-by: NInKi Dae <inki.dae@samsung.com> Reviewed-by: KyungMin Park <kyungmin.park.samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NPawel Osciak <p.osciak@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 InKi Dae 提交于
s5pv210 has five window layers (window0 ~ 4), among them, window0 ~ 2 could be used for local path with fimc(capture device) and fimd writeback feature so this patch makes default window layer for UI to be set at machine code. Signed-off-by: NInKi Dae <inki.dae@samsung.com> Reviewed-by: KyungMin Park <kyungmin.park.samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NPawel Osciak <p.osciak@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Grazvydas Ignotas 提交于
Pandora has TI WL1251 attached on MMC3, which is non-standard SDIO chip. Make use MMC_QUIRK_NONSTD_SDIO to tell SDIO core about it. Signed-off-by: NGrazvydas Ignotas <notasas@gmail.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Bob Copeland <me@bobcopeland.com> Cc: Kalle Valo <kvalo@adurom.com> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Kishore Kadiyala <kishore.kadiyala@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Grazvydas Ignotas 提交于
This will allow us to set up special cards in machine drivers just after they are detected by MMC core. Signed-off-by: NGrazvydas Ignotas <notasas@gmail.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Bob Copeland <me@bobcopeland.com> Cc: Kalle Valo <kvalo@adurom.com> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Kishore Kadiyala <kishore.kadiyala@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Uwe Kleine-König 提交于
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 12/19] ARM: cam60: don't use __init for cam60_spi_{flash_platform_data,partitions} Date: Thu, 5 Aug 2010 16:08:46 +0200 Message-Id: <1281017333-5563-12-git-send-email-u.kleine-koenig@pengutronix.de> These two structs are referenced by cam60_spi_devices. The latter is copied at init time to kmalloced memory and so the copy isn't freed after booting. So it must not contain references to .init memory. This isn't noticed by modpost as cam60_spi_devices is in .init.data, too. Noticed-and-Acked-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Uwe Kleine-König 提交于
cam60_spi_devices is passed to at91_add_device_spi which calls spi_register_board_info. The latter makes a copy of it, so living in .init.data is OK. This fixes the following warning in cam60_defconfig: WARNING: vmlinux.o(.data+0x2a00): Section mismatch in reference from the variable cam60_spi_devices to the (unknown reference) .init.data:(unknown) The variable cam60_spi_devices references the (unknown reference) __initdata (unknown) If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Acked-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Add support for the dedicated FIFO mode on newer SoCs such as the S5PV210 partly to improve support and to fix the bug where any non-EP0 IN endpoint requires its own FIFO allocation. To fix this, we ensure that any non-zero IN endpoint is given a TXFIFO using the same allocation method as the periodic case (all our current hardware has enough FIFOs and FIFO memory for a 1:1 mapping) and ensure that the necessary transmission done interrupt is enabled. The default settings from reset for the core point all EPs at FIFO0, used for the control endpoint. However, the controller documentation states that all IN endpoints _must_ have a unique FIFO to avoid any contention during transmission. Note, this leaves us with a large IN FIFO for EP0 (which re-uses the old NPTXFIFO) for an endpoint which cannot shift more than a pair of packets at a time... this is a waste, but it looks like we cannot re-allocate space to the individual IN FIFOs as they are already maxed out (to be confirmed). Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Igor Grinberg 提交于
1) Introduce ulpi specific flags for control of the ulpi phy 2) Extend the generic ulpi driver with support for Function and Interface control of upli phy 3) Update the platforms using the generic ulpi driver with new ulpi flags 4) Remove the otg control flags not in use Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il> Signed-off-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Uwe Kleine-König 提交于
Commit 7536cf99 (ARM: imx: dynamically register spi_imx devices (imx27)) introduced a variable named "pca100_spi0_data" but passed "&pca100_spi_0_data" to imx27_add_spi_imx0. This wasn't noticed earlier because both SPI_IMX and MACH_PCA100 are not enabled in mx27_defconfig. This fixes a build failure: arch/arm/mach-imx/mach-pca100.c: In function 'pca100_init': arch/arm/mach-imx/mach-pca100.c:411: error: 'pca100_spi_0_data' undeclared (first use in this function) arch/arm/mach-imx/mach-pca100.c:411: error: (Each undeclared identifier is reported only once arch/arm/mach-imx/mach-pca100.c:411: error: for each function it appears in.) Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Uwe Kleine-König 提交于
This fixes: scripts/kconfig/mconf arch/arm/Kconfig arch/arm/Kconfig:1187: invalid option make[1]: *** [menuconfig] Error 1 make: *** [menuconfig] Error 2 which was introduced by 1cea7326 ([ARM] tegra: SMP support) Cc: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com> Cc: xsecute@googlemail.com Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Colin Cross <ccross@android.com> Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Linus Walleij 提交于
This moves the U300 timer code to look up its clock rate from the clock framework as is apropriate and also switches it over to use the generic code for *calc_mult_shift() on clock source and clock event. Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Linus Walleij 提交于
This removes the quirks to clock the U300 VIC and timer by custom hooks and moves the control out to the clock framework where it belongs. This is possible now that clocks are available early. Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Linus Walleij 提交于
This fixes a regression due to the new apb_pclk stuff in the U300 platform, makes it run by splitting the apb clock off the single UART clocks. For the MMCI and PL022 clocks we don't split them: these are actually hardwired to the same clock terminal and will thus simply have a double reference count and will be referenced twice. We also move clock registration to .init_irq() so they are available early enough for probing to be successful and remove the earlier quirk to clock primecells during PrimeCell registration. Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Linus Walleij 提交于
This converts the U300 to uninverted logic for MMCI card detect, fixing a regression in the current tree. Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Will Deacon 提交于
On versions of the Cortex-A9 prior to r2p0, performing TLB invalidations by ASID match can result in the incorrect ASID being broadcast to other CPUs. As a consequence of this, the targetted TLB entries are not invalidated across the system. This workaround changes the TLB flushing routines to invalidate entries regardless of the ASID. Cc: <stable@kernel.org> Tested-by: NRob Clark <rob@ti.com> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Alexander Shishkin 提交于
The first read from ETM OS save and restore register after the power down bit deassertion returns garbage. Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NAlexander Shishkin <virtuoso@slind.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Alexander Shishkin 提交于
Add notion of ETM OS lock, save and restore registers. Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NAlexander Shishkin <virtuoso@slind.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Rabin Vincent 提交于
Add a comment describing the mcount variants and how the callsites look like. Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Signed-off-by: NRabin Vincent <rabin@rab.in> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Rabin Vincent 提交于
The mcount implementation currently uses a different indentation style from the rest of the file (and the rest of the ARM assembly in the kernel). Clean it up. Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Signed-off-by: NRabin Vincent <rabin@rab.in> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Rabin Vincent 提交于
"ARM: Auto calculate ZRELADDR and provide option for exceptions" broke the Thumb-2 decompressor because it removed an entry in the LC0 table but didn't adjust the offset the Thumb-2 code uses to load the SP from that table. Fix it, and also change the ARM code to use the separate SP-load since ARM instructions that include the SP in the LDM register list are deprecated. Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NRabin Vincent <rabin@rab.in> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Uwe Kleine-König 提交于
This is a follow up to 14cb0deb (arm/imx/gpio: add spinlock protection) and fixes the following build failure: CC arch/arm/mach-imx/pcm970-baseboard.o In file included from arch/arm/include/asm/gpio.h:6, from include/linux/gpio.h:8, from arch/arm/mach-imx/pcm970-baseboard.c:20: arch/arm/plat-mxc/include/mach/gpio.h:40: error: expected specifier-qualifier-list before 'spinlock_t' Cc: stable@kernel.org Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 hyc@symas.com 提交于
This patch is against the 2.6.34 source. Paraphrased from the 1989 BSD patch by David Borman @ cray.com: These are the changes needed for the kernel to support LINEMODE in the server. There is a new bit in the termios local flag word, EXTPROC. When this bit is set, several aspects of the terminal driver are disabled. Input line editing, character echo, and mapping of signals are all disabled. This allows the telnetd to turn off these functions when in linemode, but still keep track of what state the user wants the terminal to be in. New ioctl: TIOCSIG Generate a signal to processes in the current process group of the pty. There is a new mode for packet driver, the TIOCPKT_IOCTL bit. When packet mode is turned on in the pty, and the EXTPROC bit is set, then whenever the state of the pty is changed, the next read on the master side of the pty will have the TIOCPKT_IOCTL bit set. This allows the process on the server side of the pty to know when the state of the terminal has changed; it can then issue the appropriate ioctl to retrieve the new state. Since the original BSD patches accompanied the source code for telnet I've left that reference here, but obviously the feature is useful for any remote terminal protocol, including ssh. The corresponding feature has existed in the BSD tty driver since 1989. For historical reference, a good copy of the relevant files can be found here: http://anonsvn.mit.edu/viewvc/krb5/trunk/src/appl/telnet/?pathrev=17741Signed-off-by: NHoward Chu <hyc@symas.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 10 8月, 2010 1 次提交
-
-
由 Cesar Eduardo Barros 提交于
kunmap_atomic() is currently at level -4 on Rusty's "Hard To Misuse" list[1] ("Follow common convention and you'll get it wrong"), except in some architectures when CONFIG_DEBUG_HIGHMEM is set[2][3]. kunmap() takes a pointer to a struct page; kunmap_atomic(), however, takes takes a pointer to within the page itself. This seems to once in a while trip people up (the convention they are following is the one from kunmap()). Make it much harder to misuse, by moving it to level 9 on Rusty's list[4] ("The compiler/linker won't let you get it wrong"). This is done by refusing to build if the type of its first argument is a pointer to a struct page. The real kunmap_atomic() is renamed to kunmap_atomic_notypecheck() (which is what you would call in case for some strange reason calling it with a pointer to a struct page is not incorrect in your code). The previous version of this patch was compile tested on x86-64. [1] http://ozlabs.org/~rusty/index.cgi/tech/2008-04-01.html [2] In these cases, it is at level 5, "Do it right or it will always break at runtime." [3] At least mips and powerpc look very similar, and sparc also seems to share a common ancestor with both; there seems to be quite some degree of copy-and-paste coding here. The include/asm/highmem.h file for these three archs mention x86 CPUs at its top. [4] http://ozlabs.org/~rusty/index.cgi/tech/2008-03-30.html [5] As an aside, could someone tell me why mn10300 uses unsigned long as the first parameter of kunmap_atomic() instead of void *? Signed-off-by: NCesar Eduardo Barros <cesarb@cesarb.net> Cc: Russell King <linux@arm.linux.org.uk> (arch/arm) Cc: Ralf Baechle <ralf@linux-mips.org> (arch/mips) Cc: David Howells <dhowells@redhat.com> (arch/frv, arch/mn10300) Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> (arch/mn10300) Cc: Kyle McMartin <kyle@mcmartin.ca> (arch/parisc) Cc: Helge Deller <deller@gmx.de> (arch/parisc) Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> (arch/parisc) Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> (arch/powerpc) Cc: Paul Mackerras <paulus@samba.org> (arch/powerpc) Cc: "David S. Miller" <davem@davemloft.net> (arch/sparc) Cc: Thomas Gleixner <tglx@linutronix.de> (arch/x86) Cc: Ingo Molnar <mingo@redhat.com> (arch/x86) Cc: "H. Peter Anvin" <hpa@zytor.com> (arch/x86) Cc: Arnd Bergmann <arnd@arndb.de> (include/asm-generic) Cc: Rusty Russell <rusty@rustcorp.com.au> ("Hard To Misuse" list) Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 8月, 2010 3 次提交
-
-
由 Kukjin Kim 提交于
This patch fixes on missing s3c-sdhci card detection method for hsmmc3. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch fixes on missing S5P_DEV_FIMC in plat-s5p/Kconfig. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Sylwester Nawrocki 提交于
Change variant of the FIMC driver for compatibility with older SoC version (EVT0) used on Aquila board. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-