- 20 4月, 2008 31 次提交
-
-
由 Cyrill Gorcunov 提交于
There is possible NULL pointer dereference if kstr[n]dup failed. So fix them for safety. Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
When a server rejects our credential with an AUTH_REJECTEDCRED or similar, we need to refresh the credential and then retry the request. However, we do want to allow any requests that are in flight to finish executing, so that we can at least attempt to process the replies that depend on this instance of the credential. The solution is to ensure that gss_refresh() looks up an entirely new RPCSEC_GSS credential instead of attempting to create a context for the existing invalid credential. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
If the downcall completes before we get the spin_lock then we currently fail to refresh the credential. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
NFSv4 requires us to ensure that we break the TCP connection before we're allowed to retransmit a request. However in the case where we're retransmitting several requests that have been sent on the same connection, we need to ensure that we don't interfere with the attempt to reconnect and/or break the connection again once it has been established. We therefore introduce a 'connection' cookie that is bumped every time a connection is broken. This allows requests to track if they need to force a disconnection. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
The condition for exiting from the loop in xs_tcp_send_request() should be that we find we're not making progress (i.e. number of bytes sent is 0). Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
We need to try to ensure that we always use the same credentials whenever we re-establish the clientid on the server. If not, the server won't recognise that we're the same client, and so may not allow us to recover state. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
With the recent change to generic creds, we can no longer use cred->cr_ops->cr_name to distinguish between RPCSEC_GSS principals and AUTH_SYS/AUTH_NULL identities. Replace it with the rpc_authops->au_name instead... Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Benny points out that zero-padding of multiword bitfields is necessary, and that delimiting each word is nice to avoid endianess confusion. bhalevy: without zero padding output can be ambiguous. Also, since the printed array of two 32-bit unsigned integers is not a 64-bit number, delimiting the output with a semicolon makes more sense. Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Benny Halevy 提交于
All use sites for nfs{,4}_stat_to_errno negate their return value. It's more efficient to return a negative error from the stat_to_errno convertors rather than negating its return value everywhere. This also produces slightly smaller code. Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Now that we've added the 'generic' credentials (that are independent of the rpc_client) to the nfs_open_context, we can use those in the NLM client to ensure that the lock/unlock requests are authenticated to whoever originally opened the file. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Both NLM and NFSv4 should be able to clean up adequately in the case where the user interrupts the RPC call... Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
We shouldn't remove the lock from the list of blocked locks until the CANCEL call has completed since we may be racing with a GRANTED callback. Also ensure that we send an UNLOCK if the CANCEL request failed. Normally that should only happen if the process gets hit with a fatal signal. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Currently, it returns success as long as the RPC call was sent. We'd like to know if the CANCEL operation succeeded on the server. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
The signal masks have been rendered obsolete by the preceding patch. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Peter Staubach comments: > In the course of investigating testing failures in the locking phase of > the Connectathon testsuite, I discovered a couple of things. One was > that one of the tests in the locking tests was racy when it didn't seem > to need to be and two, that the NFS client asynchronously releases locks > when a process is exiting. ... > The Single UNIX Specification Version 3 specifies that: "All locks > associated with a file for a given process shall be removed when a file > descriptor for that file is closed by that process or the process holding > that file descriptor terminates.". > > This does not specify whether those locks must be released prior to the > completion of the exit processing for the process or not. However, > general assumptions seem to be that those locks will be released. This > leads to more deterministic behavior under normal circumstances. The following patch converts the NFSv2/v3 locking code to use the same mechanism as NFSv4 for sending asynchronous RPC calls and then waiting for them to complete. This ensures that the UNLOCK and CANCEL RPC calls will complete even if the user interrupts the call, yet satisfies the above request for synchronous behaviour on process exit. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
When we replace the existing synchronous RPC calls with asynchronous calls, the reference count will be needed in order to allow us to examine the result of the RPC call. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Also fix up nlmclnt_lock() so that it doesn't pass modified versions of fl->fl_flags to nlmclnt_cancel() and other helpers. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
We want to ensure that req->rq_private_buf.len is updated before req->rq_received, so that call_decode() doesn't use an old value for req->rq_rcv_buf.len. In 'call_decode()' itself, instead of using task->tk_status (which is set using req->rq_received) must use the actual value of req->rq_private_buf.len when deciding whether or not the received RPC reply is too short. Finally ensure that we set req->rq_rcv_buf.len to zero when retrying a request. A typo meant that we were resetting req->rq_private_buf.len in call_decode(), and then clobbering that value with the old rq_rcv_buf.len again in xprt_transmit(). Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
It is quite possible that the OPEN, CLOSE, LOCK, LOCKU,... compounds fail before the actual stateful operation has been executed (for instance in the PUTFH call). There is no way to tell from the overall status result which operations were executed from the COMPOUND. The fix is to move incrementing of the sequence id into the XDR layer, so that we do it as we process the results from the stateful operation. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
There should be no need to invalidate a perfectly good state owner just because of a stale filehandle. Doing so can cause the state recovery code to break, since nfs4_get_renew_cred() and nfs4_get_setclientid_cred() rely on finding active state owners. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
In the case of readpage() we need to ensure that the pages get unlocked, and that the error is flagged. In the case of O_DIRECT, we need to ensure that the pages are all released. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
It is possible for nfs_wb_page() to sometimes exit with 0 return value, yet the page is left in a dirty state. For instance in the case where the server rebooted, and the COMMIT request failed, then all the previously "clean" pages which were cached by the server, but were not guaranteed to have been writted out to disk, have to be redirtied and resent to the server. The fix is to have nfs_wb_page_priority() check that the page is clean before it exits... This fixes a condition that triggers the BUG_ON(PagePrivate(page)) in nfs_create_request() when we're in the nfs_readpage() path. Also eliminate a redundant BUG_ON(!PageLocked(page)) while we're at it. It turns out that clear_page_dirty_for_io() has the exact same test. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
..and always destroy using a 'soft' RPC call. Destroying GSS credentials isn't mandatory; the server can always cope with a few credentials not getting destroyed in a timely fashion. This actually fixes a hang situation. Basically, some servers will decide that the client is crazy if it tries to destroy an RPC context for which they have sent an RPCSEC_GSS_CREDPROBLEM, and so will refuse to talk to it for a while. The regression therefor probably was introduced by commit 0df7fb74. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
The rest of the networking layer uses SOCK_ASYNC_NOSPACE to signal whether or not we have someone waiting for buffer memory. Convert the SUNRPC layer to use the same idiom. Remove the unlikely()s in xs_udp_write_space and xs_tcp_write_space. In fact, the most common case will be that there is nobody waiting for buffer space. SOCK_NOSPACE is there to tell the TCP layer whether or not the cwnd was limited by the application window. Ensure that we follow the same idiom as the rest of the networking layer here too. Finally, ensure that we clear SOCK_ASYNC_NOSPACE once we wake up, so that write_space() doesn't keep waking things up on xprt->pending. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
call_verify() can, under certain circumstances, free the RPC slot. In that case, our cached pointer 'req = task->tk_rqstp' is invalid. Bug was introduced in commit 220bcc2a (SUNRPC: Don't call xprt_release in call refresh). Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 20 3月, 2008 9 次提交
-
-
由 Chuck Lever 提交于
Clean up: refactor the encoding of the opaque 16-byte private argument in xdr_encode_mon(). This will be updated later to support IPv6 addresses. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Switch to using the new mon_id encoder function. Now that we've refactored the encoding of SM_MON requests, we've discovered that the pre-computed buffer length maximums are incorrect! Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: document the argument type that xdr_encode_common() is marshalling by introducing a new function. The new function will replace xdr_encode_common() in just a sec. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: introduce a new XDR encoder specifically for the my_id argument of SM_MON requests. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: introduce a new XDR encoder specifically for the mon_name argument of SM_MON requests. This will be updated later to support IPv6 addresses in addition to IPv4 addresses. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Introduce a special helper function to check the length of NSM strings before they are placed on the wire. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean-up: replace __inline__ and use up-to-date function declaration conventions. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: RPC protocol version numbers are u32. Make sure we use an appropriate type for NLM version numbers when calling nlm_lookup_host(). Eliminates a harmless mixed sign comparison in nlm_host_lookup(). Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Bruce Fields says: "By the way, we've got another config-related nit here: http://bugzilla.linux-nfs.org/show_bug.cgi?id=156 You can build lockd without CONFIG_SYSCTL set, but then the module will fail to load." For now, disable the sysctl registration calls in lockd if CONFIG_SYSCTL is not enabled. This allows the kernel to build properly if PROC_FS or SYSCTL is not enabled, but an NFS client is desired. In the long run, we would like to be able to build the kernel with an NFS client but without lockd. This makes sense, for example, if you want an NFSv4-only NFS client, as NFSv4 doesn't use NLM at all. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-