Added I/O and DMA allocators to be used by drivers.
Signed-off-by: NMikael Starvik <starvik@axis.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Updates to device drivers.

* Use I/O and DMA allocators.
* Use wait_event_interruptible instead of interrutiple_sleep_on.
* Added spinlocks SMP.
* Changed restore_flags to local_irq_restore etc.
* Updated IDE driver include to fit 2.6.12.
Signed-off-by: NMikael Starvik <starvik@axis.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Improvements to crash debug code.
Signed-off-by: NMikael Starvik <starvik@axis.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Changes to console.

* Added LF->CRLF translation
* Make use of real console framework.
Signed-off-by: NMikael Starvik <starvik@axis.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Changes to configuration and build system.

* Added v32 sub architecture.
* Use generic hard IRQ.
* Added SMP options.
* Added options to OOPS at NMI and reboot at OOM.
* Made it possible to set objtree.
* Added option to select Kernel GDB serial port.
* Corrected Kconfig usage.
* Added system profiler.
Signed-off-by: NMikael Starvik <starvik@axis.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Changes necessary to make the sub-arch split complete.
Signed-off-by: NMikael Starvik <starvik@axis.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There's no help text for CONFIG_DEBUG_STACKOVERFLOW - add one.
Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There's no help text for CONFIG_DEBUG_STACKOVERFLOW - add one.
Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch has removed obsolete GIU driver for vr41xx.  This patch already
has been applied to mips tree.
Signed-off-by: NYoichi Yuasa <yuasa@hh.iij4u.or.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Presently the LparMap, one of the structures the kernel shares with the
legacy iSeries hypervisor has a fixed offset address in head.S.  This patch
changes this so the LparMap is a normally initialized structure, without
fixed address.  This allows us to use macros to compute some of the values
in the structure, which wasn't previously possible because the assembler
always uses signed-% which gets the wrong answers for the computations in
question.

Unfortunately, a gcc bug means that doing this requires another structure
(hvReleaseData) to be initialized in asm instead of C, but on the whole the
result is cleaner than before.
Signed-off-by: NDavid Gibson <dwg@au1.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

PPC64 machines before Power4 need a segment table page allocated for each
CPU.  Currently these are allocated statically in a big array in head.S for
all CPUs.  The segment tables need to be in the first segment (so
do_stab_bolted doesn't take a recursive fault on the stab itself), but
other than that there are no constraints which require the stabs for the
secondary CPUs to be statically allocated.

This patch allocates segment tables dynamically during boot, using
lmb_alloc() to ensure they are within the first 256M segment.  This reduces
the kernel image size by 192k...

Tested on RS64 iSeries, POWER3 pSeries, and POWER5.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Making a few functions static saves a few bytes, but only on ppc32.

     text	   data	    bss	    dec	    hex	filename
  3752421	1605208	 345608	5703237	 570645	../O-ppc64_iSeries_defconfig/vmlinux
  3709411	2042552	 339992	6091955	 5cf4b3	../O-ppc64_maple_defconfig/vmlinux
  5397329	3054824	 679856	9132009	 8b57e9	../O-ppc64_pSeries_defconfig/vmlinux
 -3882695	 417552	 197760	4498007	 44a257	../O-ppc_common_defconfig/vmlinux
 -3414510	 574500	 241440	4230450	 408d32	../O-ppc_pmac_defconfig/vmlinux
 +3882627	 417168	 197760	4497555	 44a093	../O-ppc_common_defconfig/vmlinux
 +3414442	 575428	 241440	4231310	 40908e	../O-ppc_pmac_defconfig/vmlinux
Signed-off-by: NOlaf Hering <olh@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

genrtc.c won't compile on ppc64.  Seems that ppc32 does support it though?

We do this wrong btw - we should be selecting GEN_RTC in each
arch/xxx/Kconfig.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This bites me all day when I use our default config for ppc64.  We use a
patch to fix the compile errors and provide the CONFIG_MAC_EMUMOUSEBTN
functionality (which is behind CONFIG_INPUT_ADBHID).  But Benh doesnt like
it.

http://ozlabs.org/pipermail/linuxppc64-dev/2005-March/003423.html

Just hide all the ADB parts from via-pmu on ppc64 instead.

drivers/macintosh/adbhid.c: In function `adbhid_init':
drivers/macintosh/adbhid.c:1199: error: `_MACH_chrp' undeclared (first use in this function)
drivers/macintosh/adbhid.c:1199: error: (Each undeclared identifier is reported only once
drivers/macintosh/adbhid.c:1199: error: for each function it appears in.)

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

update defconfig, use new CONFIG_HZ and set it to 100 just for the kicks.
Signed-off-by: NOlaf Hering <olh@suse.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Added missing include of cpm2.h in correct order to allow TQM8260 to build
Signed-off-by: NKumar Gala <kumar.gala@freescale.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix the MAL channels count in PPC 440SP OCP definition.  PPC 440SP has only
1 EMAC attached to MAL.
Signed-off-by: NEugene Surovegin <ebs@ebshome.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The following trivial patch changes dma_map_page() to use page_to_bus()
instead of open-coding it (incorrectly in some cases).
Signed-off-by: NEugene Surovegin <ebs@ebshome.net>
Signed-off-by: NMatt Porter <mporter@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Updated radstone_ppc7d_defconfig to include the ds1337 driver which is used
by the platform code.  This fixes the link error when building.
Signed-off-by: NKumar Gala <kumar.gala@freescale.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Updated prpmc750 platform code to include serial_reg.h to fix building.
Signed-off-by: NKumar Gala <kumar.gala@freescale.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Typo bug that was using PCI1 defines instead of PCI2 when setting up the
second PCI bus controller on 85xx based systems.  This hasn't been a real
issue since currently the PCI2 sizes are the same as the PCI1 sizes for
currently supported boards.

Thanks to Andrew Klossner @ Xerox for point this out.
Signed-off-by: NKumar Gala <kumar.gala@freescale.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The 2.6.12.3 kernel compilation fails for ARCH=ppc when CONFIG_PQ2FADS=y.
This patch has been tested on Freescale PQ2FADS-ZU and -VR boards.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

On PPC 8xx, the DataTLBMiss handler does not jump directly to the page
fault handler, as was the case in v2.4.

It instead loads an invalid TLB which causes a subsequent DataTLBError
exception.

The comment on top of it haven't been update to reflect the change, though.
Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The UARTs on the MPC824x are unique devices and really shouldn't be thought
of as a DUART.  In addition, if both UARTs are in use we need to configure
the part to enable the 2nd UART since the pins for the UARTs are
multiplexed.  Adds support to run the 824x Sandpoint with both UARTs if
desired.
Signed-off-by: NMatt McClintock <msm@freescale.com>
Signed-off-by: NKumar Gala <kumar.gala@freescale.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Added a proper prototype for cpm2_reset() which gets rid of a build
warning.
Signed-off-by: NJon Loeliger <jdl@freescale.com>
Signed-off-by: NKumar Gala <kumar.gala@freescale.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

update pmac_defconfig

enable all relevant options in common_defconfig,
so it can serve as a compiletest for PPC_MULTIPLATFORM configuration
Signed-off-by: NOlaf Hering <olh@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

use new Kconfig.hz on ppc/ppc64, use also Kconfig.preempt for ppc
Signed-off-by: NOlaf Hering <olh@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Originally __free_pages_bulk used the relative page number within a zone to
define its buddies.  This meant that to maintain the "maximally aligned"
requirements (that an allocation of size N will be aligned at least to N
physically) zones had to also be aligned to 1<<MAX_ORDER pages.  When
__free_pages_bulk was updated to use the relative page frame numbers of the
free'd pages to pair buddies this released the alignment constraint on the
'left' edge of the zone.  This allows _either_ edge of the zone to contain
partial MAX_ORDER sized buddies.  These simply never will have matching
buddies and thus will never make it to the 'top' of the pyramid.

The patch below removes a now redundant check ensuring that the mem_map was
aligned to MAX_ORDER.
Signed-off-by: NAndy Whitcroft <apw@shadowen.org>
Cc: Christoph Lameter <christoph@lameter.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The madvise() system call returns -EBADF for areas which does not map to
files, only for *behaviour* request MADV_WILLNEED.

According to man pages, madvise returns :

EBADF - the map exists, but the area maps something that isn't a file.

Fixes bug 2995.
Signed-off-by: NSuzuki K P <suzuki@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Attached patch removes #ifdef CONFIG_WATCHDOG_NOWAYOUT mess duplicated in
almost every watchdog driver and replaces it with common define in
linux/watchdog.h.
Signed-off-by: NAndrey Panin <pazke@donpac.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

powernow-k8.c: In function `query_current_values_with_pending_wait':
powernow-k8.c:110: warning: `hi' may be used uninitialized in this function
Signed-off-by: NBrian Gerst <bgerst@didntduck.org>
Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add support for the MRi PCIDS1 dual port serial card.  This card is a
little controversial since it is the subject of a PCI vendor/device ID
clash.  (See
http://www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html).  I have
for now just used the hex ID 0x950a.  The divisor was part calculated part
iterated, so may not be exactly correct (but works for me at all settings
between 300 - 115300 bps).

Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

For some reason halfmd4 isn't being linked into the kernel any more and
modular ext3 wants it.

So statically link the halfmd4 code into the kernel.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix bug identifued by Richard Purdie <rpurdie@rpsys.net>.

oprofile calls check_user_page_readable() from interrupt context, so we
deadlock over various VFS locks.

But check_user_page_readable() doesn't imply either a read or a write of the
page's contents.  Change __follow_page() so that check_user_page_readable()
can tell __follow_page() that we're not accessing the page's contents, and use
that info to avoid the troublesome lock-takings.

Also, make follow_page() inline for the single callsite in memory.c to save a
bit of stack space.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Oliver Paukstadt from our test department is testing the xip patches in
Linus' git-tree.  He found a problem that shows when reading a file that
contains sparse blocks (holes) on a -o xip mounted ext2 filesystem: the
BUG_ON() in fs/ext2/xip.c:40 triggers where it should not.  The problem was
introduced by a cleanup in my previous patch, this patch fixes it.
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch fixes a microcode lockup in my CD-ROM adapters when a blank CD
is inserted.  However, do not try to burn CDs yet!  I'm pretty sure that
trying it will end in coasters.

 - Fix a few cases where we were unable to resynchronize with replies
   for previous commands. The main thing is to keep reading replies
   in case of a stall. This is done with the new state CLRRS.
 - Since I am forgetting the basic state machine already, document it.
 - Move counter increments in the looping path in its own function.
 - Fix a harmless buglet in case CSW read fails to submit: do not
   override state.
 - Implement the Alan Stern's idea for adaptive signature checking.
Signed-off-by: NPete Zaitcev <zaitcev@yahoo.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

All mempolicy changes must be inside the spinlock and readding the rb_erase
prevents a crash while doing:

> echo "1" > /tmp/numatest
> numactl --length=0x4000 --shm /tmp/numatest --localalloc
> numactl --length=0x2000 --offset=0 --shm /tmp/numatest --membind=0
> numactl --length=0x2000 --offset=0x2000 --shm /tmp/numatest --membind=1
> ipcs
> ipcrm -M "the_key_value_of_this_shm_area"

Based on a patch by John Blackwood

Cc: <john.blackwood@ccur.com>
Cc: <andrea@suse.de>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- updates the version

- fix mixing of declarations and code.  The mixing of declarations and
  code displays warnings when used against RedHat RHEL4.0 distro (compiler
  version is 3.4.3-22.1) and hence I separated them out.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The jsm driver uses a static number of 253.  The major number 253 is a
reserved for "LOCAL/EXPERIMENTAL USE" by both char and block devices.  So
take advantage of the dynamic allocation of major number by the kernel.
Signed-off-by: NV. Ananda Krishnan <mansarov@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>