- 26 5月, 2016 11 次提交
-
-
由 Ilya Dryomov 提交于
Introduce ceph_osd_request_target, containing all mapping-related fields of ceph_osd_request and calc_target() for calculating mappings and populating it. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Knowning just acting set isn't enough, we need to be able to record up set as well to detect interval changes. This means returning (up[], up_len, up_primary, acting[], acting_len, acting_primary) and passing it around. Introduce and switch to ceph_osds to help with that. Rename ceph_calc_pg_acting() to ceph_pg_to_up_acting_osds() and return both up and acting sets from it. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Rename ceph_oloc_oid_to_pg() to ceph_object_locator_to_pg(). Emphasise that returned is raw PG and return -ENOENT instead of -EIO if the pool doesn't exist. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Given struct foo { u64 id; struct rb_node bar_node; }; generate insert_bar(), erase_bar() and lookup_bar() functions with DEFINE_RB_FUNCS(bar, struct foo, id, bar_node) The key is assumed to be an integer (u64, int, etc), compared with < and >. nodefld has to be initialized with RB_CLEAR_NODE(). Start using it for MDS, MON and OSD requests and OSD sessions. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
They are called only once, from ceph_osdc_stop() and handle_osds_timeout() respectively. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Either unused or useless: osdmap->mkfs_epoch osd->o_marked_for_keepalive monc->num_generic_requests osdc->map_waiters osdc->last_requested_map osdc->timeout_tid osd_req_op_cls_response_data() osdmap_apply_incremental() @msgr arg Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Currently ceph_object_id can hold object names of up to 100 (CEPH_MAX_OID_NAME_LEN) characters. This is enough for all use cases, expect one - long rbd image names: - a format 1 header is named "<imgname>.rbd" - an object that points to a format 2 header is named "rbd_id.<imgname>" We operate on these potentially long-named objects during rbd map, and, for format 1 images, during header refresh. (A format 2 header name is a small system-generated string.) Lift this 100 character limit by making ceph_object_id be able to point to an externally-allocated string. Apart from being able to work with almost arbitrarily-long named objects, this allows us to reduce the size of ceph_object_id from >100 bytes to 64 bytes. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
For a message pool message, preallocate a page, just like we do for osd_op. For a normal message, take ceph_object_id into account and don't bother subtracting CEPH_OSD_SLAB_OPS ceph_osd_ops. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
The size of ->r_request and ->r_reply messages depends on the size of the object name (ceph_object_id), while the size of ceph_osd_request is fixed. Move message allocation into a separate function that would have to be called after ceph_object_id and ceph_object_locator (which is also going to become variable in size with RADOS namespaces) have been filled in: req = ceph_osdc_alloc_request(...); <fill in req->r_base_oid> <fill in req->r_base_oloc> ceph_osdc_alloc_messages(req); Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
ceph_osdc_build_request() is going away. Grab snapc and initialize ->r_snapid in ceph_osdc_alloc_request(). Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
- 26 4月, 2016 1 次提交
-
-
由 Ilya Dryomov 提交于
Starting the kernel client with cephx disabled and then enabling cephx and restarting userspace daemons can result in a crash: [262671.478162] BUG: unable to handle kernel paging request at ffffebe000000000 [262671.531460] IP: [<ffffffff811cd04a>] kfree+0x5a/0x130 [262671.584334] PGD 0 [262671.635847] Oops: 0000 [#1] SMP [262672.055841] CPU: 22 PID: 2961272 Comm: kworker/22:2 Not tainted 4.2.0-34-generic #39~14.04.1-Ubuntu [262672.162338] Hardware name: Dell Inc. PowerEdge R720/068CDY, BIOS 2.4.3 07/09/2014 [262672.268937] Workqueue: ceph-msgr con_work [libceph] [262672.322290] task: ffff88081c2d0dc0 ti: ffff880149ae8000 task.ti: ffff880149ae8000 [262672.428330] RIP: 0010:[<ffffffff811cd04a>] [<ffffffff811cd04a>] kfree+0x5a/0x130 [262672.535880] RSP: 0018:ffff880149aeba58 EFLAGS: 00010286 [262672.589486] RAX: 000001e000000000 RBX: 0000000000000012 RCX: ffff8807e7461018 [262672.695980] RDX: 000077ff80000000 RSI: ffff88081af2be04 RDI: 0000000000000012 [262672.803668] RBP: ffff880149aeba78 R08: 0000000000000000 R09: 0000000000000000 [262672.912299] R10: ffffebe000000000 R11: ffff880819a60e78 R12: ffff8800aec8df40 [262673.021769] R13: ffffffffc035f70f R14: ffff8807e5b138e0 R15: ffff880da9785840 [262673.131722] FS: 0000000000000000(0000) GS:ffff88081fac0000(0000) knlGS:0000000000000000 [262673.245377] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [262673.303281] CR2: ffffebe000000000 CR3: 0000000001c0d000 CR4: 00000000001406e0 [262673.417556] Stack: [262673.472943] ffff880149aeba88 ffff88081af2be04 ffff8800aec8df40 ffff88081af2be04 [262673.583767] ffff880149aeba98 ffffffffc035f70f ffff880149aebac8 ffff8800aec8df00 [262673.694546] ffff880149aebac8 ffffffffc035c89e ffff8807e5b138e0 ffff8805b047f800 [262673.805230] Call Trace: [262673.859116] [<ffffffffc035f70f>] ceph_x_destroy_authorizer+0x1f/0x50 [libceph] [262673.968705] [<ffffffffc035c89e>] ceph_auth_destroy_authorizer+0x3e/0x60 [libceph] [262674.078852] [<ffffffffc0352805>] put_osd+0x45/0x80 [libceph] [262674.134249] [<ffffffffc035290e>] remove_osd+0xae/0x140 [libceph] [262674.189124] [<ffffffffc0352aa3>] __reset_osd+0x103/0x150 [libceph] [262674.243749] [<ffffffffc0354703>] kick_requests+0x223/0x460 [libceph] [262674.297485] [<ffffffffc03559e2>] ceph_osdc_handle_map+0x282/0x5e0 [libceph] [262674.350813] [<ffffffffc035022e>] dispatch+0x4e/0x720 [libceph] [262674.403312] [<ffffffffc034bd91>] try_read+0x3d1/0x1090 [libceph] [262674.454712] [<ffffffff810ab7c2>] ? dequeue_entity+0x152/0x690 [262674.505096] [<ffffffffc034cb1b>] con_work+0xcb/0x1300 [libceph] [262674.555104] [<ffffffff8108fb3e>] process_one_work+0x14e/0x3d0 [262674.604072] [<ffffffff810901ea>] worker_thread+0x11a/0x470 [262674.652187] [<ffffffff810900d0>] ? rescuer_thread+0x310/0x310 [262674.699022] [<ffffffff810957a2>] kthread+0xd2/0xf0 [262674.744494] [<ffffffff810956d0>] ? kthread_create_on_node+0x1c0/0x1c0 [262674.789543] [<ffffffff817bd81f>] ret_from_fork+0x3f/0x70 [262674.834094] [<ffffffff810956d0>] ? kthread_create_on_node+0x1c0/0x1c0 What happens is the following: (1) new MON session is established (2) old "none" ac is destroyed (3) new "cephx" ac is constructed ... (4) old OSD session (w/ "none" authorizer) is put ceph_auth_destroy_authorizer(ac, osd->o_auth.authorizer) osd->o_auth.authorizer in the "none" case is just a bare pointer into ac, which contains a single static copy for all services. By the time we get to (4), "none" ac, freed in (2), is long gone. On top of that, a new vtable installed in (3) points us at ceph_x_destroy_authorizer(), so we end up trying to destroy a "none" authorizer with a "cephx" destructor operating on invalid memory! To fix this, decouple authorizer destruction from ac and do away with a single static "none" authorizer by making a copy for each OSD or MDS session. Authorizers themselves are independent of ac and so there is no reason for destroy_authorizer() to be an ac op. Make it an op on the authorizer itself by turning ceph_authorizer into a real struct. Fixes: http://tracker.ceph.com/issues/15447Reported-by: NAlan Zhang <alan.zhang@linux.com> Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Reviewed-by: NSage Weil <sage@redhat.com>
-
- 26 3月, 2016 7 次提交
-
-
由 Yan, Zheng 提交于
This helper duplicates last extent operation in OSD request, then adjusts the new extent operation's offset and length. The helper is for scatterd page writeback, which adds nonconsecutive dirty pages to single OSD request. Signed-off-by: NYan, Zheng <zyan@redhat.com> Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Turn r_ops into a flexible array member to enable large, consisting of up to 16 ops, OSD requests. The use case is scattered writeback in cephfs and, as far as the kernel client is concerned, 16 is just a made up number. r_ops had size 3 for copyup+hint+write, but copyup is really a special case - it can only happen once. ceph_osd_request_cache is therefore stuffed with num_ops=2 requests, anything bigger than that is allocated with kmalloc(). req_mempool is backed by ceph_osd_request_cache, which means either num_ops=1 or num_ops=2 for use_mempool=true - all existing users (ceph_writepages_start(), ceph_osdc_writepages()) are fine with that. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
ceph_osd_request_cache was introduced a long time ago. Also, osd_req is about to get a flexible array member, which ceph_osd_request_cache is going to be aware of. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Although msg_size is calculated correctly, the terms are grouped in a misleading way - snaps appears to not have room for a u32 length. Move calculation closer to its use and regroup terms. No functional change. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Yan, Zheng 提交于
This avoids defining large array of r_reply_op_{len,result} in in struct ceph_osd_request. Signed-off-by: NYan, Zheng <zyan@redhat.com> Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Follow userspace nomenclature on this - the next commit adds outdata_len. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
It is currently hard-coded in the mon_client that mdsmap and monmap subs are continuous, while osdmap sub is always "onetime". To better handle full clusters/pools in the osd_client, we need to be able to issue continuous osdmap subs. Revamp subs code to allow us to specify for each sub whether it should be continuous or not. Although not strictly required for the above, switch to SUBSCRIBE2 protocol while at it, eliminating the ambiguity between a request for "every map since X" and a request for "just the latest" when we don't have a map yet (i.e. have epoch 0). SUBSCRIBE2 feature bit is now required - it's been supported since pre-argonaut (2010). Move "got mdsmap" call to the end of ceph_mdsc_handle_map() - calling in before we validate the epoch and successfully install the new map can mess up mon_client sub state. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
- 25 2月, 2016 1 次提交
-
-
由 Ilya Dryomov 提交于
Commit d15f9d69 ("libceph: check data_len in ->alloc_msg()") mistakenly bumped the log level on the "tid %llu unknown, skipping" message. Turn it back into a dout() - stray replies are perfectly normal when OSDs flap, crash, get killed for testing purposes, etc. Cc: stable@vger.kernel.org # 4.3+ Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Reviewed-by: NAlex Elder <elder@linaro.org>
-
- 05 2月, 2016 1 次提交
-
-
由 Ilya Dryomov 提交于
Empty request_redirect_t (struct ceph_request_redirect in the kernel client) is now encoded with a bool. NEW_OSDOPREPLY_ENCODING feature bit overlaps with already supported CRUSH_TUNABLES5. Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Reviewed-by: NSage Weil <sage@redhat.com>
-
- 03 11月, 2015 4 次提交
-
-
由 Ilya Dryomov 提交于
The following bit in ceph_msg_revoke_incoming() is unsafe: struct ceph_connection *con = msg->con; if (!con) return; mutex_lock(&con->mutex); <more msg->con use> There is nothing preventing con from getting destroyed right after msg->con test. One easy way to reproduce this is to disable message signing only on the server side and try to map an image. The system will go into a libceph: read_partial_message ffff880073f0ab68 signature check failed libceph: osd0 192.168.255.155:6801 bad crc/signature libceph: read_partial_message ffff880073f0ab68 signature check failed libceph: osd0 192.168.255.155:6801 bad crc/signature loop which has to be interrupted with Ctrl-C. Hit Ctrl-C and you are likely to end up with a random GP fault if the reset handler executes "within" ceph_msg_revoke_incoming(): <yet another reply w/o a signature> ... <Ctrl-C> rbd_obj_request_end ceph_osdc_cancel_request __unregister_request ceph_osdc_put_request ceph_msg_revoke_incoming ... osd_reset __kick_osd_requests __reset_osd remove_osd ceph_con_close reset_connection <clear con->in_msg->con> <put con ref> put_osd <free osd/con> <msg->con use> <-- !!! If ceph_msg_revoke_incoming() executes "before" the reset handler, osd/con will be leaked because ceph_msg_revoke_incoming() clears con->in_msg but doesn't put con ref, while reset_connection() only puts con ref if con->in_msg != NULL. The current msg->con scheme was introduced by commits 38941f80 ("libceph: have messages point to their connection") and 92ce034b ("libceph: have messages take a connection reference"), which defined when messages get associated with a connection and when that association goes away. Part of the problem is that this association is supposed to go away in much too many places; closing this race entirely requires either a rework of the existing or an addition of a new layer of synchronization. In lieu of that, we can make it *much* less likely to hit by disassociating messages only on their destruction and resend through a different connection. This makes the code simpler and is probably a good thing to do regardless - this patch adds a msg_con_set() helper which is is called from only three places: ceph_con_send() and ceph_con_in_msg_alloc() to set msg->con and ceph_msg_release() to clear it. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
We can use msg->con instead - at the point we sign an outgoing message or check the signature on the incoming one, msg->con is always set. We wouldn't know how to sign a message without an associated session (i.e. msg->con == NULL) and being able to sign a message using an explicitly provided authorizer is of no use. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ioana Ciornei 提交于
This patch changes the osd_req_op_data() macro to not evaluate arguments more than once in order to follow the kernel coding style. Signed-off-by: NIoana Ciornei <ciorneiioana@gmail.com> Reviewed-by: NAlex Elder <elder@linaro.org> [idryomov@gmail.com: changelog, formatting] Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Shraddha Barke 提交于
Since handle_reply() does not use its con argument, remove it. Signed-off-by: NShraddha Barke <shraddha.6596@gmail.com> Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
- 16 10月, 2015 1 次提交
-
-
由 Ilya Dryomov 提交于
This covers only the simplest case - an object size sized write, but it's still useful in tiering setups when EC is used for the base tier as writefull op can be proxied, saving an object promotion. Even though updating ceph_osdc_new_request() to allow writefull should just be a matter of fixing an assert, I didn't do it because its only user is cephfs. All other sites were updated. Reflects ceph.git commit 7bfb7f9025a8ee0d2305f49bf0336d2424da5b5b. Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Reviewed-by: NAlex Elder <elder@linaro.org>
-
- 09 9月, 2015 1 次提交
-
-
由 Ilya Dryomov 提交于
Only ->alloc_msg() should check data_len of the incoming message against the preallocated ceph_msg, doing it in the messenger is not right. The contract is that either ->alloc_msg() returns a ceph_msg which will fit all of the portions of the incoming message, or it returns NULL and possibly sets skip, signaling whether NULL is due to an -ENOMEM. ->alloc_msg() should be the only place where we make the skip/no-skip decision. I stumbled upon this while looking at con/osd ref counting. Right now, if we get a non-extent message with a larger data portion than we are prepared for, ->alloc_msg() returns a ceph_msg, and then, when we skip it in the messenger, we don't put the con/osd ref acquired in ceph_con_in_msg_alloc() (which is normally put in process_message()), so this also fixes a memory leak. An existing BUG_ON in ceph_msg_data_cursor_init() ensures we don't corrupt random memory should a buggy ->alloc_msg() return an unfit ceph_msg. While at it, I changed the "unknown tid" dout() to a pr_warn() to make sure all skips are seen and unified format strings. Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Reviewed-by: NAlex Elder <elder@linaro.org>
-
- 25 6月, 2015 3 次提交
-
-
由 Ilya Dryomov 提交于
There are currently three libceph-level timeouts that the user can specify on mount: mount_timeout, osd_idle_ttl and osdkeepalive. All of these are in seconds and no checking is done on user input: negative values are accepted, we multiply them all by HZ which may or may not overflow, arbitrarily large jiffies then get added together, etc. There is also a bug in the way mount_timeout=0 is handled. It's supposed to mean "infinite timeout", but that's not how wait.h APIs treat it and so __ceph_open_session() for example will busy loop without much chance of being interrupted if none of ceph-mons are there. Fix all this by verifying user input, storing timeouts capped by msecs_to_jiffies() in jiffies and using the new ceph_timeout_jiffies() helper for all user-specified waits to handle infinite timeouts correctly. Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Reviewed-by: NAlex Elder <elder@linaro.org>
-
由 Yan, Zheng 提交于
Signed-off-by: NYan, Zheng <zyan@redhat.com> Reviewed-by: NAlex Elder <elder@linaro.org>
-
由 Yan, Zheng 提交于
Signed-off-by: NYan, Zheng <zyan@redhat.com> Reviewed-by: NAlex Elder <elder@linaro.org>
-
- 21 5月, 2015 2 次提交
-
-
由 Ilya Dryomov 提交于
This reverts commit ba9d114e. .. which introduced a regression that prevented all lingering requests requeued in kick_requests() from ever being sent to the OSDs, resulting in a lot of missed notifies. In retrospect it's pretty obvious that r_req_lru_item item in the case of lingering requests can be used not only for notarget, but also for unsent linkage due to how tightly actual map and enqueue operations are coupled in __map_request(). The assertion that was being silenced is taken care of in the previous ("libceph: request a new osdmap if lingering request maps to no osd") commit: by always kicking homeless lingering requests we ensure that none of them ends up on the notarget list outside of the critical section guarded by request_mutex. Cc: stable@vger.kernel.org # 3.18+, needs b0494532 "libceph: request a new osdmap if lingering request maps to no osd" Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Reviewed-by: NSage Weil <sage@redhat.com>
-
由 Ilya Dryomov 提交于
This commit does two things. First, if there are any homeless lingering requests, we now request a new osdmap even if the osdmap that is being processed brought no changes, i.e. if a given lingering request turned homeless in one of the previous epochs and remained homeless in the current epoch. Not doing so leaves us with a stale osdmap and as a result we may miss our window for reestablishing the watch and lose notifies. MON=1 OSD=1: # cat linger-needmap.sh #!/bin/bash rbd create --size 1 test DEV=$(rbd map test) ceph osd out 0 rbd map dne/dne # obtain a new osdmap as a side effect (!) sleep 1 ceph osd in 0 rbd resize --size 2 test # rbd info test | grep size -> 2M # blockdev --getsize $DEV -> 1M N.B.: Not obtaining a new osdmap in between "osd out" and "osd in" above is enough to make it miss that resize notify, but that is a bug^Wlimitation of ceph watch/notify v1. Second, homeless lingering requests are now kicked just like those lingering requests whose mapping has changed. This is mainly to recognize that a homeless lingering request makes no sense and to preserve the invariant that a registered lingering request is not sitting on any of r_req_lru_item lists. This spares us a WARN_ON, which commit ba9d114e ("libceph: clear r_req_lru_item in __unregister_linger_request()") tried to fix the _wrong_ way. Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Reviewed-by: NSage Weil <sage@redhat.com>
-
- 19 2月, 2015 2 次提交
-
-
由 Ilya Dryomov 提交于
a255651d ("ceph: ensure auth ops are defined before use") made kfree() in put_osd() conditional on the authorizer. A mechanical mistake most likely - fix it. Cc: Alex Elder <elder@linaro.org> Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Reviewed-by: NSage Weil <sage@redhat.com> Reviewed-by: NAlex Elder <elder@linaro.org>
-
由 Ilya Dryomov 提交于
It turns out it's possible to get __remove_osd() called twice on the same OSD. That doesn't sit well with rb_erase() - depending on the shape of the tree we can get a NULL dereference, a soft lockup or a random crash at some point in the future as we end up touching freed memory. One scenario that I was able to reproduce is as follows: <osd3 is idle, on the osd lru list> <con reset - osd3> con_fault_finish() osd_reset() <osdmap - osd3 down> ceph_osdc_handle_map() <takes map_sem> kick_requests() <takes request_mutex> reset_changed_osds() __reset_osd() __remove_osd() <releases request_mutex> <releases map_sem> <takes map_sem> <takes request_mutex> __kick_osd_requests() __reset_osd() __remove_osd() <-- !!! A case can be made that osd refcounting is imperfect and reworking it would be a proper resolution, but for now Sage and I decided to fix this by adding a safe guard around __remove_osd(). Fixes: http://tracker.ceph.com/issues/8087 Cc: Sage Weil <sage@redhat.com> Cc: stable@vger.kernel.org # 3.9+: 7c6e6fc5: libceph: assert both regular and lingering lists in __remove_osd() Cc: stable@vger.kernel.org # 3.9+: cc9f1f51: libceph: change from BUG to WARN for __remove_osd() asserts Cc: stable@vger.kernel.org # 3.9+ Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Reviewed-by: NSage Weil <sage@redhat.com> Reviewed-by: NAlex Elder <elder@linaro.org>
-
- 18 12月, 2014 4 次提交
-
-
由 Yan, Zheng 提交于
allow specifying position of extent operation in multi-operations osd request. This is required for cephfs to convert inline data to normal data (compare xattr, then write object). Signed-off-by: NYan, Zheng <zyan@redhat.com> Reviewed-by: NIlya Dryomov <idryomov@redhat.com>
-
由 Yan, Zheng 提交于
Add CEPH_OSD_OP_CREATE support. Also change libceph to not treat CEPH_OSD_OP_DELETE as an extent op and add an assert to that end. Signed-off-by: NYan, Zheng <zyan@redhat.com> Reviewed-by: NIlya Dryomov <idryomov@redhat.com>
-
由 Yan, Zheng 提交于
Signed-off-by: NYan, Zheng <zyan@redhat.com> Reviewed-by: NIlya Dryomov <idryomov@redhat.com>
-
由 Yan, Zheng 提交于
Signed-off-by: NYan, Zheng <zyan@redhat.com>
-
- 14 11月, 2014 2 次提交
-
-
由 Ilya Dryomov 提交于
No reason to use BUG_ON for osd request list assertions. Signed-off-by: NIlya Dryomov <idryomov@redhat.com> Reviewed-by: NAlex Elder <elder@linaro.org>
-
由 Ilya Dryomov 提交于
kick_requests() can put linger requests on the notarget list. This means we need to clear the much-overloaded req->r_req_lru_item in __unregister_linger_request() as well, or we get an assertion failure in ceph_osdc_release_request() - !list_empty(&req->r_req_lru_item). AFAICT the assumption was that registered linger requests cannot be on any of req->r_req_lru_item lists, but that's clearly not the case. Signed-off-by: NIlya Dryomov <idryomov@redhat.com> Reviewed-by: NAlex Elder <elder@linaro.org>
-