Pull staging/IIO driver rfixes from Greg KH:
 "Here are a number of small IIO and staging driver fixes for 4.11-rc6.
  Nothing big here, just iio fixes for reported issues, and an ashmem
  fix for a very old bug that has been reported by a number of Android
  vendors"

* tag 'staging-4.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: android: ashmem: lseek failed due to no FMODE_LSEEK.
  iio: hid-sensor-attributes: Fix sensor property setting failure.
  iio: accel: hid-sensor-accel-3d: Fix duplicate scan index error
  iio: core: Fix IIO_VAL_FRACTIONAL_LOG2 for negative values
  iio: st_pressure: initialize lps22hb bootime
  iio: bmg160: reset chip when probing
  iio: cros_ec_sensors: Fix return value to get raw and calibbias data.

Pull VFS fixes from Al Viro:
 "statx followup fixes and a fix for stack-smashing on alpha"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  alpha: fix stack smashing in old_adjtimex(2)
  statx: Include a mask for stx_attributes in struct statx
  statx: Reserve the top bit of the mask for future struct expansion
  xfs: report crtime and attribute flags to statx
  ext4: Add statx support
  statx: optimize copy of struct statx to userspace
  statx: remove incorrect part of vfs_statx() comment
  statx: reject unknown flags when using NULL path
  Documentation/filesystems: fix documentation for ->getattr()

Pull block fixes from Jens Axboe:
 "Here's a pull request for 4.11-rc, fixing a set of issues mostly
  centered around the new scheduling framework. These have been brewing
  for a while, but split up into what we absolutely need in 4.11, and
  what we can defer until 4.12. These are well tested, on both single
  queue and multiqueue setups, and with and without shared tags. They
  fix several hangs that have happened in testing.

  This is obviously larger than I would have preferred at this point in
  time, but I don't think we can shave much off this and still get the
  desired results.

  In detail, this pull request contains:

   - a set of five fixes for NVMe, mostly from Christoph and one from
     Roland.

   - a series from Bart, fixing issues with dm-mq and SCSI shared tags
     and scheduling. Note that one of those patches commit messages may
     read like an optimization, but it is in fact an important fix for
     queue restarts in particular.

   - a series from Omar, most importantly fixing a hang with multiple
     hardware queues when we fail to get a driver tag. Another important
     fix in there is for resizing hardware queues, which nbd does when
     handling multiple sockets for one connection.

   - fixing an imbalance in putting the ctx for hctx request allocations
     from Minchan"

* 'for-linus' of git://git.kernel.dk/linux-block:
  blk-mq: Restart a single queue if tag sets are shared
  dm rq: Avoid that request processing stalls sporadically
  scsi: Avoid that SCSI queues get stuck
  blk-mq: Introduce blk_mq_delay_run_hw_queue()
  blk-mq: remap queues when adding/removing hardware queues
  blk-mq-sched: fix crash in switch error path
  blk-mq-sched: set up scheduler tags when bringing up new queues
  blk-mq-sched: refactor scheduler initialization
  blk-mq: use the right hctx when getting a driver tag fails
  nvmet: fix byte swap in nvmet_parse_io_cmd
  nvmet: fix byte swap in nvmet_execute_write_zeroes
  nvmet: add missing byte swap in nvmet_get_smart_log
  nvme: add missing byte swap in nvme_setup_discard
  nvme: Correct NVMF enum values to match NVMe-oF rev 1.0
  block: do not put mq context in blk_mq_alloc_request_hctx

Pull pin control fix from Linus Walleij:
 "This late fix for pin control is hopefully the last I send this cycle.

  The problem was detected early in the v4.11 release cycle and there
  has been some back and forth on how to solve it. Sadly the proper fix
  arrives late, but at least not too late.

  An issue was detected with pin control on the Freescale i.MX after the
  refactorings for more general group and function handling.

  We now have the proper fix for this"

* tag 'pinctrl-v4.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: core: Fix pinctrl_register_and_init() with pinctrl_enable()

Pull powerpc fixes from Michael Ellerman:
 "Some more powerpc fixes for 4.11:

  Headed to stable:

   - disable HFSCR[TM] if TM is not supported, fixes a potential host
     kernel crash triggered by a hostile guest, but only in
     configurations that no one uses

   - don't try to fix up misaligned load-with-reservation instructions

   - fix flush_(d|i)cache_range() called from modules on little endian
     kernels

   - add missing global TLB invalidate if cxl is active

   - fix missing preempt_disable() in crc32c-vpmsum

  And a fix for selftests build changes that went in this release:

   - selftests/powerpc: Fix standalone powerpc build

  Thanks to: Benjamin Herrenschmidt, Frederic Barrat, Oliver O'Halloran,
  Paul Mackerras"

* tag 'powerpc-4.11-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/crypto/crc32c-vpmsum: Fix missing preempt_disable()
  powerpc/mm: Add missing global TLB invalidate if cxl is active
  powerpc/64: Fix flush_(d|i)cache_range() called from modules
  powerpc: Don't try to fix up misaligned load-with-reservation instructions
  powerpc: Disable HFSCR[TM] if TM is not supported
  selftests/powerpc: Fix standalone powerpc build

In the case that compat_get_bitmap fails we do not want to copy the
bitmap to the user as it will contain uninitialized stack data and leak
sensitive data.
Signed-off-by: NChris Salls <salls@cs.ucsb.edu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, inputting the following command will succeed but actually the
value will be truncated:

  # echo 0x12ffffffff > /proc/sys/net/ipv4/tcp_notsent_lowat

This is not friendly to the user, so instead, we should report error
when the value is larger than UINT_MAX.

Fixes: e7d316a0 ("sysctl: handle error writing UINT_MAX to u32 fields")
Signed-off-by: NLiping Zhang <zlpnobody@gmail.com>
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

vfs_llseek will check whether the file mode has
FMODE_LSEEK, no return failure. But ashmem can be
lseek, so add FMODE_LSEEK to ashmem file.

Comment From Greg Hackmann:
	ashmem_llseek() passes the llseek() call through to the backing
	shmem file.  91360b02 ("ashmem: use vfs_llseek()") changed
	this from directly calling the file's llseek() op into a VFS
	layer call.  This also adds a check for the FMODE_LSEEK bit, so
	without that bit ashmem_llseek() now always fails with -ESPIPE.

Fixes: 91360b02 ("ashmem: use vfs_llseek()")
Signed-off-by: NShuxiao Zhang <zhangshuxiao@xiaomi.com>
Tested-by: NGreg Hackmann <ghackmann@google.com>
Cc: stable <stable@vger.kernel.org> # 3.18+
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull sparc fixes from David Miller:
 "Several fixes here, mostly having to due with either build errors or
  memory corruptions depending upon whether you have THP enabled or not"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: remove unused wp_works_ok macro
  sparc32: Export vac_cache_size to fix build error
  sparc64: Fix memory corruption when THP is enabled
  sparc64: Fix kernel panic due to erroneous #ifdef surrounding pmd_write()
  arch/sparc: Avoid DCTI Couples
  sparc64: kern_addr_valid regression
  sparc64: Add support for 2G hugepages
  sparc64: Fix size check in huge_pte_alloc

Pull KVM fixes from Radim Krčmář:
 "ARM:
   - Fix a problem with GICv3 userspace save/restore
   - Clarify GICv2 userspace save/restore ABI
   - Be more careful in clearing GIC LRs
   - Add missing synchronization primitive to our MMU handling code

  PPC:
   - Check for a NULL return from kzalloc

  s390:
   - Prevent translation exception errors on valid page tables for the
     instruction-exection-protection support

  x86:
   - Fix Page-Modification Logging when running a nested guest"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: PPC: Book3S HV: Check for kmalloc errors in ioctl
  KVM: nVMX: initialize PML fields in vmcs02
  KVM: nVMX: do not leak PML full vmexit to L1
  KVM: arm/arm64: vgic: Fix GICC_PMR uaccess on GICv3 and clarify ABI
  KVM: arm64: Ensure LRs are clear when they should be
  kvm: arm/arm64: Fix locking for kvm_free_stage2_pgd
  KVM: s390: remove change-recording override support
  arm/arm64: KVM: Take mmap_sem in kvm_arch_prepare_memory_region
  arm/arm64: KVM: Take mmap_sem in stage2_unmap_vm

Pull audit cleanup from Paul Moore:
 "A week later than I had hoped, but as promised, here is the audit
  uninline-fix we talked about during the last audit pull request.

  The patch is slightly different than what we originally discussed as
  it made more sense to keep the audit_signal_info() function in
  auditsc.c rather than move it and bunch of other related
  variables/definitions into audit.c/audit.h.

  At some point in the future I need to look at how the audit code is
  organized across kernel/audit*, I suspect we could do things a bit
  better, but it doesn't seem like a -rc release is a good place for
  that ;)

  Regardless, this patch passes our tests without problem and looks good
  for v4.11"

* 'stable-4.11' of git://git.infradead.org/users/pcmoore/audit:
  audit: move audit_signal_info() into kernel/auditsc.c

Merge misc fixes from Andrew Morton:
 "10 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: move pcp and lru-pcp draining into single wq
  mailmap: update Yakir Yang email address
  mm, swap_cgroup: reschedule when neeed in swap_cgroup_swapoff()
  dax: fix radix tree insertion race
  mm, thp: fix setting of defer+madvise thp defrag mode
  ptrace: fix PTRACE_LISTEN race corrupting task->state
  vmlinux.lds: add missing VMLINUX_SYMBOL macros
  mm/page_alloc.c: fix print order in show_free_areas()
  userfaultfd: report actual registered features in fdinfo
  mm: fix page_vma_mapped_walk() for ksm pages

We currently have 2 specific WQ_RECLAIM workqueues in the mm code.
vmstat_wq for updating pcp stats and lru_add_drain_wq dedicated to drain
per cpu lru caches.  This seems more than necessary because both can run
on a single WQ.  Both do not block on locks requiring a memory
allocation nor perform any allocations themselves.  We will save one
rescuer thread this way.

On the other hand drain_all_pages() queues work on the system wq which
doesn't have rescuer and so this depend on memory allocation (when all
workers are stuck allocating and new ones cannot be created).

Initially we thought this would be more of a theoretical problem but
Hugh Dickins has reported:

: 4.11-rc has been giving me hangs after hours of swapping load.  At
: first they looked like memory leaks ("fork: Cannot allocate memory");
: but for no good reason I happened to do "cat /proc/sys/vm/stat_refresh"
: before looking at /proc/meminfo one time, and the stat_refresh stuck
: in D state, waiting for completion of flush_work like many kworkers.
: kthreadd waiting for completion of flush_work in drain_all_pages().

This worker should be using WQ_RECLAIM as well in order to guarantee a
forward progress.  We can reuse the same one as for lru draining and
vmstat.

Link: http://lkml.kernel.org/r/20170307131751.24936-1-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Suggested-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NMel Gorman <mgorman@suse.de>
Tested-by: NYang Li <pku.leo@gmail.com>
Tested-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Set current email address to replace previous employers email addresses.

Link: http://lkml.kernel.org/r/1491450722-6633-1-git-send-email-jeffy.chen@rock-chips.comSigned-off-by: NJeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We got need_resched() warnings in swap_cgroup_swapoff() because
swap_cgroup_ctrl[type].length is particularly large.

Reschedule when needed.

Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1704061315270.80559@chino.kir.corp.google.comSigned-off-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While running generic/340 in my test setup I hit the following race.  It
can happen with kernels that support FS DAX PMDs, so v4.10 thru
v4.11-rc5.

Thread 1				Thread 2
--------				--------
dax_iomap_pmd_fault()
  grab_mapping_entry()
    spin_lock_irq()
    get_unlocked_mapping_entry()
    'entry' is NULL, can't call lock_slot()
    spin_unlock_irq()
    radix_tree_preload()
					dax_iomap_pmd_fault()
					  grab_mapping_entry()
					    spin_lock_irq()
					    get_unlocked_mapping_entry()
					    ...
					    lock_slot()
					    spin_unlock_irq()
					  dax_pmd_insert_mapping()
					    <inserts a PMD mapping>
    spin_lock_irq()
    __radix_tree_insert() fails with -EEXIST
    <fall back to 4k fault, and die horribly
     when inserting a 4k entry where a PMD exists>

The issue is that we have to drop mapping->tree_lock while calling
radix_tree_preload(), but since we didn't have a radix tree entry to
lock (unlike in the pmd_downgrade case) we have no protection against
Thread 2 coming along and inserting a PMD at the same index.  For 4k
entries we handled this with a special-case response to -EEXIST coming
from the __radix_tree_insert(), but this doesn't save us for PMDs
because the -EEXIST case can also mean that we collided with a 4k entry
in the radix tree at a different index, but one that is covered by our
PMD range.

So, correctly handle both the 4k and 2M collision cases by explicitly
re-checking the radix tree for an entry at our index once we reacquire
mapping->tree_lock.

This patch has made it through a clean xfstests run with the current
v4.11-rc5 based linux/master, and it also ran generic/340 500 times in a
loop.  It used to fail within the first 10 iterations.

Link: http://lkml.kernel.org/r/20170406212944.2866-1-ross.zwisler@linux.intel.comSigned-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: <stable@vger.kernel.org>    [4.10+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Setting thp defrag mode of "defer+madvise" actually sets "defer" in the
kernel due to the name similarity and the out-of-order way the string is
checked in defrag_store().

Check the string in the correct order so that
TRANSPARENT_HUGEPAGE_DEFRAG_KSWAPD_OR_MADV_FLAG is set appropriately for
"defer+madvise".

Fixes: 21440d7e ("mm, thp: add new defer+madvise defrag option")
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1704051814420.137626@chino.kir.corp.google.comSigned-off-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In PT_SEIZED + LISTEN mode STOP/CONT signals cause a wakeup against
__TASK_TRACED.  If this races with the ptrace_unfreeze_traced at the end
of a PTRACE_LISTEN, this can wake the task /after/ the check against
__TASK_TRACED, but before the reset of state to TASK_TRACED.  This
causes it to instead clobber TASK_WAKING, allowing a subsequent wakeup
against TRACED while the task is still on the rq wake_list, corrupting
it.

Oleg said:
 "The kernel can crash or this can lead to other hard-to-debug problems.
  In short, "task->state = TASK_TRACED" in ptrace_unfreeze_traced()
  assumes that nobody else can wake it up, but PTRACE_LISTEN breaks the
  contract. Obviusly it is very wrong to manipulate task->state if this
  task is already running, or WAKING, or it sleeps again"

[akpm@linux-foundation.org: coding-style fixes]
Fixes: 9899d11f ("ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL")
Link: http://lkml.kernel.org/r/xm26y3vfhmkp.fsf_-_@bsegall-linux.mtv.corp.google.comSigned-off-by: NBen Segall <bsegall@google.com>
Acked-by: NOleg Nesterov <oleg@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When __{start,end}_ro_after_init is referenced from C code, we run into
the following build errors on blackfin:

  kernel/extable.c:169: undefined reference to `__start_ro_after_init'
  kernel/extable.c:169: undefined reference to `__end_ro_after_init'

The build error is due to the fact that blackfin is one of the few
arches that prepends an underscore '_' to all symbols defined in C.

Fix this by wrapping __{start,end}_ro_after_init in vmlinux.lds.h with
VMLINUX_SYMBOL(), which adds the necessary prefix for arches that have
HAVE_UNDERSCORE_SYMBOL_PREFIX.

Link: http://lkml.kernel.org/r/1491259387-15869-1-git-send-email-jeyu@redhat.comSigned-off-by: NJessica Yu <jeyu@redhat.com>
Acked-by: NKees Cook <keescook@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Eddie Kovsky <ewk@edkovsky.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fixes: 11fb9989 ("mm: move most file-based accounting to the node")
Link: http://lkml.kernel.org/r/1490377730.30219.2.camel@beget.ruSigned-off-by: NAlexander Polyakov <apolyakov@beget.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>	[4.8+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

fdinfo for userfault file descriptor reports UFFD_API_FEATURES.  Up
until recently, the UFFD_API_FEATURES was defined as 0, therefore
corresponding field in fdinfo always contained zero.  Now, with
introduction of several additional features, UFFD_API_FEATURES is not
longer 0 and it seems better to report actual features requested for the
userfaultfd object described by the fdinfo.

First, the applications that were using userfault will still see zero at
the features field in fdinfo.  Next, reporting actual features rather
than available features, gives clear indication of what userfault
features are used by an application.

Link: http://lkml.kernel.org/r/1491140181-22121-1-git-send-email-rppt@linux.vnet.ibm.comSigned-off-by: NMike Rapoport <rppt@linux.vnet.ibm.com>
Reviewed-by: NAndrea Arcangeli <aarcange@redhat.com>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Doug Smythies reports oops with KSM in this backtrace, I've been seeing
the same:

  page_vma_mapped_walk+0xe6/0x5b0
  page_referenced_one+0x91/0x1a0
  rmap_walk_ksm+0x100/0x190
  rmap_walk+0x4f/0x60
  page_referenced+0x149/0x170
  shrink_active_list+0x1c2/0x430
  shrink_node_memcg+0x67a/0x7a0
  shrink_node+0xe1/0x320
  kswapd+0x34b/0x720

Just as observed in commit 4b0ece6f ("mm: migrate: fix
remove_migration_pte() for ksm pages"), you cannot use page->index
calculations on ksm pages.

page_vma_mapped_walk() is relying on __vma_address(), where a ksm page
can lead it off the end of the page table, and into whatever nonsense is
in the next page, ending as an oops inside check_pte()'s pte_page().

KSM tells page_vma_mapped_walk() exactly where to look for the page, it
does not need any page->index calculation: and that's so also for all
the normal and file and anon pages - just not for THPs and their
subpages.  Get out early in most cases: instead of a PageKsm test, move
down the earlier not-THP-page test, as suggested by Kirill.

I'm also slightly worried that this loop can stray into other vmas, so
added a vm_end test to prevent surprises; though I have not imagined
anything worse than a very contrived case, in which a page mlocked in
the next vma might be reclaimed because it is not mlocked in this vma.

Fixes: ace71a19 ("mm: introduce page_vma_mapped_walk()")
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1704031104400.1118@eggly.anvilsSigned-off-by: NHugh Dickins <hughd@google.com>
Reported-by: NDoug Smythies <dsmythies@telus.net>
Tested-by: NDoug Smythies <dsmythies@telus.net>
Reviewed-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Without this fix (and another to the userspace component itself
described later), the kernel will be unable to process any OrangeFS
requests after the userspace component is restarted (due to a crash or
at the administrator's behest).

The bug here is that inside orangefs_remount, the orangefs_request_mutex
is locked.  When the userspace component restarts while the filesystem
is mounted, it sends a ORANGEFS_DEV_REMOUNT_ALL ioctl to the device,
which causes the kernel to send it a few requests aimed at synchronizing
the state between the two.  While this is happening the
orangefs_request_mutex is locked to prevent any other requests going
through.

This is only half of the bugfix.  The other half is in the userspace
component which outright ignores(!) requests made before it considers
the filesystem remounted, which is after the ioctl returns.  Of course
the ioctl doesn't return until after the userspace component responds to
the request it ignores.  The userspace component has been changed to
allow ORANGEFS_VFS_OP_FEATURES regardless of the mount status.

Mike Marshall says:
 "I've tested this patch against the fixed userspace part. This patch is
  real important, I hope it can make it into 4.11...

  Here's what happens when the userspace daemon is restarted, without
  the patch:

    =============================================
    [ INFO: possible recursive locking detected ]
    [   4.10.0-00007-ge98bdb30 #1 Not tainted    ]
    ---------------------------------------------
    pvfs2-client-co/29032 is trying to acquire lock:
     (orangefs_request_mutex){+.+.+.}, at: service_operation+0x3c7/0x7b0 [orangefs]
                  but task is already holding lock:
     (orangefs_request_mutex){+.+.+.}, at: dispatch_ioctl_command+0x1bf/0x330 [orangefs]

    CPU: 0 PID: 29032 Comm: pvfs2-client-co Not tainted 4.10.0-00007-ge98bdb30 #1
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-1.fc25 04/01/2014
    Call Trace:
     __lock_acquire+0x7eb/0x1290
     lock_acquire+0xe8/0x1d0
     mutex_lock_killable_nested+0x6f/0x6e0
     service_operation+0x3c7/0x7b0 [orangefs]
     orangefs_remount+0xea/0x150 [orangefs]
     dispatch_ioctl_command+0x227/0x330 [orangefs]
     orangefs_devreq_ioctl+0x29/0x70 [orangefs]
     do_vfs_ioctl+0xa3/0x6e0
     SyS_ioctl+0x79/0x90"
Signed-off-by: NMartin Brandenburg <martin@omnibond.com>
Acked-by: NMike Marshall <hubcap@omnibond.com>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull PCI fixes from Bjorn Helgaas:

 - fix ThunderX legacy firmware resources

 - fix ARTPEC-6 and DesignWare platform driver NULL pointer dereferences

 - fix HiSilicon link error

* tag 'pci-v4.11-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: dwc: Fix dw_pcie_ops NULL pointer dereference
  PCI: dwc: Select PCI_HOST_COMMON for hisi
  PCI: thunder-pem: Fix legacy firmware PEM-specific resources

To improve scalability, if hardware queues are shared, restart
a single hardware queue in round-robin fashion. Rename
blk_mq_sched_restart_queues() to reflect the new semantics.
Remove blk_mq_sched_mark_restart_queue() because this function
has no callers. Remove flag QUEUE_FLAG_RESTART because this
patch removes the code that uses this flag.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

While running the srp-test software I noticed that request
processing stalls sporadically at the beginning of a test, namely
when mkfs is run against a dm-mpath device. Every time when that
happened the following command was sufficient to resume request
processing:

    echo run >/sys/kernel/debug/block/dm-0/state

This patch avoids that such request processing stalls occur. The
test I ran is as follows:

    while srp-test/run_tests -d -r 30 -t 02-mq; do :; done
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
Signed-off-by: NJens Axboe <axboe@fb.com>

If a .queue_rq() function returns BLK_MQ_RQ_QUEUE_BUSY then the block
driver that implements that function is responsible for rerunning the
hardware queue once requests can be queued again successfully.

commit 52d7f1b5 ("blk-mq: Avoid that requeueing starts stopped
queues") removed the blk_mq_stop_hw_queue() call from scsi_queue_rq()
for the BLK_MQ_RQ_QUEUE_BUSY case. Hence change all calls to functions
that are intended to rerun a busy queue such that these examine all
hardware queues instead of only stopped queues.

Since no other functions than scsi_internal_device_block() and
scsi_internal_device_unblock() should ever stop or restart a SCSI
queue, change the blk_mq_delay_queue() call into a
blk_mq_delay_run_hw_queue() call.

Fixes: commit 52d7f1b5 ("blk-mq: Avoid that requeueing starts stopped queues")
Fixes: commit 7e79dadc ("blk-mq: stop hardware queue in blk_mq_delay_queue()")
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Long Li <longli@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Introduce a function that runs a hardware queue unconditionally
after a delay. Note: there is already a function that stops and
restarts a hardware queue after a delay, namely blk_mq_delay_queue().

This function will be used in the next patch in this series.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Long Li <longli@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Pull device mapper fixes from Mike Snitzer:

 - two stable fixes for the verity target's FEC support

 - a stable fix for raid target's raid1 support (when no bitmap is used)

 - a 4.11 cache metadata v2 format fix to properly test blocks are clean

* tag 'dm-4.11-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm verity fec: fix bufio leaks
  dm raid: fix NULL pointer dereference for raid1 without bitmap
  dm cache metadata: fix metadata2 format's blocks_are_clean_separate_dirty
  dm verity fec: limit error correction recursion

Pull arm64 fixes from Will Deacon:
 "We've got a regression fix for the signal raised when userspace makes
  an unsupported unaligned access and a revert of the contiguous
  (hugepte) support for hugetlb, which has once again been found to be
  broken. One day, maybe, we'll get it right.

  Summary:

   - restore previous SIGBUS behaviour for unhandled unaligned user
     accesses

   - revert broken support for the contiguous bit in hugetlb (again...)"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  Revert "Revert "arm64: hugetlb: partial revert of 66b3923a""
  arm64: mm: unaligned access by user-land should be received as SIGBUS

Pull metag usercopy fixes from James Hogan:
 "Metag usercopy fault handling fixes

  These patches fix a bunch of longstanding (some over a decade old)
  metag user copy fault handling bugs. Thanks go to Al Viro for spotting
  some of the questionable code in the first place"

* tag 'metag-for-v4.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
  metag/usercopy: Add missing fixups
  metag/usercopy: Fix src fixup in from user rapf loops
  metag/usercopy: Set flags before ADDZ
  metag/usercopy: Zero rest of buffer from copy_from_user
  metag/usercopy: Add early abort to copy_to_user
  metag/usercopy: Fix alignment error checking
  metag/usercopy: Drop unused macros

Pull ACPI fix from Rafael Wysocki:
 "This fixes a core device enumeration code change made in 4.10, in
  order to address a reported issue, that went too far.

  Specifics:

   - Refine the check for the existence of _HID in find_child_checks()
     so that it doesn't trigger for device objects with device IDs made
     up by the kernel (Rafael Wysocki)"

* tag 'acpi-4.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / scan: Prefer devices without _HID for _ADR matching

Pull Xen fix from Juergen Gross:
 "A fix for error path cleanup in the xenbus handler"

* tag 'for-linus-4.11b-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xenbus: remove transaction holder from list before freeing

I saw some very confusing sysctl output on my system:
  # cat /proc/sys/net/core/xfrm_aevent_rseqth
  -2
  # cat /proc/sys/net/core/xfrm_aevent_etime
  -10
  # cat /proc/sys/net/ipv4/tcp_notsent_lowat
  -4294967295

Because we forget to set the *negp flag in proc_douintvec, so it will
become a garbage value.

Since the value related to proc_douintvec is always an unsigned integer,
so we can set *negp to false explictily to fix this issue.

Fixes: e7d316a0 ("sysctl: handle error writing UINT_MAX to u32 fields")
Signed-off-by: NLiping Zhang <zlpnobody@gmail.com>
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit e7d316a0 ("sysctl: handle error writing UINT_MAX to u32
fields") introduced the proc_douintvec helper function, but it forgot to
add the related sanity check when doing register_sysctl_table.  So add
it now.
Signed-off-by: NLiping Zhang <zlpnobody@gmail.com>
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

blk_mq_update_nr_hw_queues() used to remap hardware queues, which is the
behavior that drivers expect. However, commit 4e68a011 changed
blk_mq_queue_reinit() to not remap queues for the case of CPU
hotplugging, inadvertently making blk_mq_update_nr_hw_queues() not remap
queues as well. This breaks, for example, NBD's multi-connection mode,
leaving the added hardware queues unused. Fix it by making
blk_mq_update_nr_hw_queues() explicitly remap the queues.

Fixes: 4e68a011 ("blk-mq: don't redistribute hardware queues on a CPU hotplug event")
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

In elevator_switch(), if blk_mq_init_sched() fails, we attempt to fall
back to the original scheduler. However, at this point, we've already
torn down the original scheduler's tags, so this causes a crash. Doing
the fallback like the legacy elevator path is much harder for mq, so fix
it by just falling back to none, instead.
Signed-off-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

If a new hardware queue is added at runtime, we don't allocate scheduler
tags for it, leading to a crash. This hooks up the scheduler framework
to blk_mq_{init,exit}_hctx() to make sure everything gets properly
initialized/freed.
Signed-off-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Preparation cleanup for the next couple of fixes, push
blk_mq_sched_setup() and e->ops.mq.init_sched() into a helper.
Signed-off-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

While dispatching requests, if we fail to get a driver tag, we mark the
hardware queue as waiting for a tag and put the requests on a
hctx->dispatch list to be run later when a driver tag is freed. However,
blk_mq_dispatch_rq_list() may dispatch requests from multiple hardware
queues if using a single-queue scheduler with a multiqueue device. If
blk_mq_get_driver_tag() fails, it doesn't update the hardware queue we
are processing. This means we end up using the hardware queue of the
previous request, which may or may not be the same as that of the
current request. If it isn't, the wrong hardware queue will end up
waiting for a tag, and the requests will be on the wrong dispatch list,
leading to a hang.

The fix is twofold:

1. Make sure we save which hardware queue we were trying to get a
   request for in blk_mq_get_driver_tag() regardless of whether it
   succeeds or not.
2. Make blk_mq_dispatch_rq_list() take a request_queue instead of a
   blk_mq_hw_queue to make it clear that it must handle multiple
   hardware queues, since I've already messed this up on a couple of
   occasions.

This didn't appear in testing with nvme and mq-deadline because nvme has
more driver tags than the default number of scheduler tags. However,
with the blk_mq_update_nr_hw_queues() fix, it showed up with nbd.
Signed-off-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NJens Axboe <axboe@fb.com>