1. 25 5月, 2012 27 次提交
    • T
      tick: Move skew_tick option into the HIGH_RES_TIMER section · 62cf20b3
      Thomas Gleixner 提交于
      commit 5307c955 (tick: Add tick skew boot option) broke the
      !CONFIG_HIGH_RES_TIMERS build.
      
      Move the boot option parsing into the CONFIG_HIGH_RES_TIMERS section.
      Reported-by: NIngo Molnar <mingo@elte.hu>
      Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      Cc: Mike Galbraith <mgalbraith@suse.de>
      62cf20b3
    • M
      clocksource: em_sti: Add DT support · fc0830fe
      Magnus Damm 提交于
      Update the em-sti driver to support DT.
      Signed-off-by: NMagnus Damm <damm@opensource.se>
      Cc: arnd@arndb.de
      Cc: horms@verge.net.au
      Cc: johnstul@us.ibm.com
      Cc: rjw@sisk.pl
      Cc: lethal@linux-sh.org
      Cc: gregkh@linuxfoundation.org
      Cc: olof@lixom.net
      Link: http://lkml.kernel.org/r/20120509143950.27521.7949.sendpatchset@w520Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      fc0830fe
    • M
      clocksource: em_sti: Emma Mobile STI driver · b9dbf951
      Magnus Damm 提交于
      The STI hardware is based on a single 48-bit 32kHz
      counter that together with two individual compare
      registers can generate interrupts. There are no
      timer operating modes selectable which means that
      the timer can not clear on match.
      
      This driver is providing clocksource support for the
      48-bit counter. Clockevents are also supported using
      the same timer in oneshot mode.
      Signed-off-by: NMagnus Damm <damm@opensource.se>
      Cc: horms@verge.net.au
      Cc: arnd@arndb.de
      Cc: johnstul@us.ibm.com
      Cc: rjw@sisk.pl
      Cc: lethal@linux-sh.org
      Cc: gregkh@linuxfoundation.org
      Cc: olof@lixom.net
      Link: http://lkml.kernel.org/r/20120525070344.23443.69756.sendpatchset@w520Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      b9dbf951
    • M
      clockevents: Make clockevents_config() a global symbol · e5400321
      Magnus Damm 提交于
      Make clockevents_config() into a global symbol to allow it to be used
      by compiled-in clockevent drivers. This is needed by drivers that want
      to update the timer frequency after registration time.
      Signed-off-by: NMagnus Damm <damm@opensource.se>
      Tested-by: NSimon Horman <horms@verge.net.au>
      Cc: arnd@arndb.de
      Cc: johnstul@us.ibm.com
      Cc: rjw@sisk.pl
      Cc: lethal@linux-sh.org
      Cc: gregkh@linuxfoundation.org
      Cc: olof@lixom.net
      Cc: Magnus Damm <magnus.damm@gmail.com>
      Link: http://lkml.kernel.org/r/20120509143934.27521.46553.sendpatchset@w520Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      e5400321
    • M
      tick: Add tick skew boot option · 5307c955
      Mike Galbraith 提交于
      Let the user decide whether power consumption or jitter is the
      more important consideration for their machines.
      
      Quoting removal commit af5ab277:
      
      "Historically, Linux has tried to make the regular timer tick on the
       various CPUs not happen at the same time, to avoid contention on
       xtime_lock.
          
       Nowadays, with the tickless kernel, this contention no longer happens
       since time keeping and updating are done differently. In addition,
       this skew is actually hurting power consumption in a measurable way on
       many-core systems."
      
      Problems:
      
      - Contrary to the above, systems do encounter contention on both
        xtime_lock and RCU structure locks when the tick is synchronized.
        
      - Moderate sized RT systems suffer intolerable jitter due to the tick
        being synchronized.
      
      - SGI reports the same for their large systems.
      
      - Fully utilized systems reap no power saving benefit from skew removal,
        but do suffer from resulting induced lock contention.
      
      - 0209f649 rcu: limit rcu_node leaf-level fanout
        This patch was born to combat lock contention which testing showed
        to have been _induced by_ skew removal.  Skew the tick, contention
        disappeared virtually completely.
      Signed-off-by: NMike Galbraith <mgalbraith@suse.de>
      Link: http://lkml.kernel.org/r/1336472458.21924.78.camel@marge.simpson.netSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
      5307c955
    • L
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc · ce004178
      Linus Torvalds 提交于
      Pull sparc changes from David S. Miller:
       "This has the generic strncpy_from_user() implementation architectures
        can now use, which we've been developing on linux-arch over the past
        few days.
      
        For good measure I ran both a 32-bit and a 64-bit glibc testsuite run,
        and the latter of which pointed out an adjustment I needed to make to
        sparc's user_addr_max() definition.  Linus, you were right, STACK_TOP
        was not the right thing to use, even on sparc itself :-)
      
        From Sam Ravnborg, we have a conversion of sparc32 over to the common
        alloc_thread_info_node(), since the aspect which originally blocked
        our doing so (sun4c) has been removed."
      
      Fix up trivial arch/sparc/Kconfig and lib/Makefile conflicts.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
        sparc: Fix user_addr_max() definition.
        lib: Sparc's strncpy_from_user is generic enough, move under lib/
        kernel: Move REPEAT_BYTE definition into linux/kernel.h
        sparc: Increase portability of strncpy_from_user() implementation.
        sparc: Optimize strncpy_from_user() zero byte search.
        sparc: Add full proper error handling to strncpy_from_user().
        sparc32: use the common implementation of alloc_thread_info_node()
      ce004178
    • L
      Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs · 9978306e
      Linus Torvalds 提交于
      Pull XFS update from Ben Myers:
      
       - Removal of xfsbufd
       - Background CIL flushes have been moved to a workqueue.
       - Fix to xfs_check_page_type applicable to filesystems where
         blocksize < page size
       - Fix for stale data exposure when extsize hints are used.
       - A series of xfs_buf cache cleanups.
       - Fix for XFS_IOC_ALLOCSP
       - Cleanups for includes and removal of xfs_lrw.[ch].
       - Moved all busy extent handling to it's own file so that it is easier
         to merge with userspace.
       - Fix for log mount failure.
       - Fix to enable inode reclaim during quotacheck at mount time.
       - Fix for delalloc quota accounting.
       - Fix for memory reclaim deadlock on agi buffer.
       - Fixes for failed writes and to clean up stale delalloc blocks.
       - Fix to use GFP_NOFS in blkdev_issue_flush
       - SEEK_DATA/SEEK_HOLE support
      
      * 'for-linus' of git://oss.sgi.com/xfs/xfs: (57 commits)
        xfs: add trace points for log forces
        xfs: fix memory reclaim deadlock on agi buffer
        xfs: fix delalloc quota accounting on failure
        xfs: protect xfs_sync_worker with s_umount semaphore
        xfs: introduce SEEK_DATA/SEEK_HOLE support
        xfs: make xfs_extent_busy_trim not static
        xfs: make XBF_MAPPED the default behaviour
        xfs: flush outstanding buffers on log mount failure
        xfs: Properly exclude IO type flags from buffer flags
        xfs: clean up xfs_bit.h includes
        xfs: move xfs_do_force_shutdown() and kill xfs_rw.c
        xfs: move xfs_get_extsz_hint() and kill xfs_rw.h
        xfs: move xfs_fsb_to_db to xfs_bmap.h
        xfs: clean up busy extent naming
        xfs: move busy extent handling to it's own file
        xfs: move xfsagino_t to xfs_types.h
        xfs: use iolock on XFS_IOC_ALLOCSP calls
        xfs: kill XBF_DONTBLOCK
        xfs: kill xfs_read_buf()
        xfs: kill XBF_LOCK
        ...
      9978306e
    • L
      Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · abe81e25
      Linus Torvalds 提交于
      Pull more relocation fixes from Peter Anvin:
       "These are additional symbols that have been found to either be
        absolute or look like they might end up being absolute on one version
        of GNU ld or another.  Unfortunately we have since that a different
        GNU ld version, 2.21, can generate bogus absolute symbols; again, this
        would have caused a malfunctioning kernel on x86-32 if relocated.
      
        The relocs.c changes changed silent corruption to a build time error.
      
        It is worth noting that if the various barrier symbols we use were
        more consistent in the namespace used this probably could be reduced
        to a single regexp; if nothing else it looks like there is migration
        toward a common __(start|stop)___.* namespace."
      
      * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        x86, relocs: Add jiffies and jiffies_64 to the relative whitelist
        x86-32, relocs: Whitelist more symbols for ld bug workaround
      abe81e25
    • L
      Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6 · b1bf7d4d
      Linus Torvalds 提交于
      Pull GPIO driver changes from Grant Likely:
       "Lots of gpio changes, both to core code and drivers.
      
        Changes do touch architecture code to remove the need for separate
        arm/gpio.h includes in most architectures.
      
        Some new drivers are added, and a number of gpio drivers are converted
        to use irq_domains for gpio inputs used as interrupts.  Device tree
        support has been amended to allow multiple gpio_chips to use the same
        device tree node.
      
        Remaining changes are primarily bug fixes."
      
      * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: (33 commits)
        gpio/generic: initialize basic_mmio_gpio shadow variables properly
        gpiolib: Remove 'const' from data argument of gpiochip_find()
        gpio/rc5t583: add gpio driver for RICOH PMIC RC5T583
        gpiolib: quiet gpiochip_add boot message noise
        gpio: mpc8xxx: Prevent NULL pointer deref in demux handler
        gpio/lpc32xx: Add device tree support
        gpio: Adjust of_xlate API to support multiple GPIO chips
        gpiolib: Implement devm_gpio_request_one()
        gpio-mcp23s08: dbg_show: fix pullup configuration display
        Add support for TCA6424A
        gpio/omap: (re)fix wakeups on level-triggered GPIOs
        gpio/omap: fix broken context restore for non-OFF mode transitions
        gpio/omap: fix missing check in *_runtime_suspend()
        gpio/omap: remove cpu_is_omapxxxx() checks from *_runtime_resume()
        gpio/omap: remove suspend/resume callbacks
        gpio/omap: remove retrigger variable in gpio_irq_handler
        gpio/omap: remove saved_wakeup field from struct gpio_bank
        gpio/omap: remove suspend_wakeup field from struct gpio_bank
        gpio/omap: remove saved_fallingdetect, saved_risingdetect
        gpio/omap: remove virtual_irq_start variable
        ...
      
      Conflicts:
      	drivers/gpio/gpio-samsung.c
      b1bf7d4d
    • L
      Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6 · 0708500d
      Linus Torvalds 提交于
      Pull device tree changes from Grant Likely:
       "Mostly documentation updates, but also includes an empty stub for
        non-CONFIG_OF builds."
      
      * tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6:
        dt/documentation: Fix value format description
        dt: add vendor prefix for EM Microelectronics
        ARM: DT: Add binding for GIC virtualization extentions (VGIC)
        of/irq: add empty irq_of_parse_and_map() for non-dt builds
      0708500d
    • L
      Merge tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6 · be122abe
      Linus Torvalds 提交于
      Pull SPI changes from Grant Likely:
       "Bug fixes and new features for SPI device drivers.  Also move device
        tree support code out of drivers/of and into drivers/spi/spi.c where
        it makes more sense."
      
      * tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6:
        spi: By default setup spi_masters with 1 chipselect and dynamics bus number
        SPI: PRIMA2: use the newest APIs of PINCTRL to fix compiling errors
        spi/spi-fsl-spi: reference correct pdata in fsl_spi_cs_control
        spi: refactor spi-coldfire-qspi to use SPI queue framework.
        spi/omap2-mcspi: convert to the pump message infrastructure
        spi/rspi: add dmaengine support
        spi/topcliff: use correct __devexit_p annotation
        spi: Dont call prepare/unprepare transfer if not populated
        spi/ep93xx: clean probe/remove routines
        spi/devicetree: Move devicetree support code into spi directory
        spi: use module_pci_driver
        spi/omap2-mcspi: Trivial optimisation
        spi: omap2-mcspi: add support for pm_runtime autosuspend
        spi/omap: Remove bus_num usage for instance index
        OMAP : SPI : use devm_* functions
        spi: omap2-mcspi: convert to module_platform_driver
        spi: omap2-mcspi: make it behave as a module
      be122abe
    • L
      Merge tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6 · b343c8be
      Linus Torvalds 提交于
      Pull irqdomain changes from Grant Likely:
       "Minor changes and fixups for irqdomain infrastructure.  The most
        important change adds the ability to remove a registered irqdomain."
      
      * tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6:
        irqdomain: Document size parameter of irq_domain_add_linear()
        irqdomain: trivial pr_fmt conversion.
        irqdomain: Kill off duplicate definitions.
        irqdomain: Make irq_domain_simple_map() static.
        irqdomain: Export remaining public API symbols.
        irqdomain: Support removal of IRQ domains.
      b343c8be
    • L
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha · 745914df
      Linus Torvalds 提交于
      Pull alpha updates from Matt Turner:
       "This pull adds the implementations of some Tru64 syscalls which allow
        some proprietary software such as the C compiler to work on Linux.
      
        Also, it adds some big-endian ioread functions to help us get closer
        to building allyesconfig."
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
        alpha: add io{read,write}{16,32}be functions
        alpha: implement various OSF/1 stat syscalls
        alpha: implement setsysinfo(SSI_LMF) as a no-op
      745914df
    • D
      sparc: Fix user_addr_max() definition. · c5389831
      David S. Miller 提交于
      We need to use TASK_SIZE because for 64-bit tasks the value
      of STACK_TOP actually sits in the middle of the address space
      so we'll get false-negatives.
      
      Adjust the TASK_SIZE definition on sparc64 to accomodate this,
      in the context in which user_addr_max() is used we have the
      test_thread_flag() definition available but not the one for
      test_tsk_thread_flag().
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c5389831
    • L
      Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · c7523a7c
      Linus Torvalds 提交于
      Pull timer updates from Thomas Gleixner.
      
      Various trivial conflict fixups in arch Kconfig due to addition of
      unrelated entries nearby.  And one slightly more subtle one for sparc32
      (new user of GENERIC_CLOCKEVENTS), fixed up as per Thomas.
      
      * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
        timekeeping: Fix a few minor newline issues.
        time: remove obsolete declaration
        ntp: Fix a stale comment and a few stray newlines.
        ntp: Correct TAI offset during leap second
        timers: Fixup the Kconfig consolidation fallout
        x86: Use generic time config
        unicore32: Use generic time config
        um: Use generic time config
        tile: Use generic time config
        sparc: Use: generic time config
        sh: Use generic time config
        score: Use generic time config
        s390: Use generic time config
        openrisc: Use generic time config
        powerpc: Use generic time config
        mn10300: Use generic time config
        mips: Use generic time config
        microblaze: Use generic time config
        m68k: Use generic time config
        m32r: Use generic time config
        ...
      c7523a7c
    • D
      lib: Sparc's strncpy_from_user is generic enough, move under lib/ · 2922585b
      David S. Miller 提交于
      To use this, an architecture simply needs to:
      
      1) Provide a user_addr_max() implementation via asm/uaccess.h
      
      2) Add "select GENERIC_STRNCPY_FROM_USER" to their arch Kcnfig
      
      3) Remove the existing strncpy_from_user() implementation and symbol
         exports their architecture had.
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      Acked-by: NDavid Howells <dhowells@redhat.com>
      2922585b
    • D
      kernel: Move REPEAT_BYTE definition into linux/kernel.h · 44696908
      David S. Miller 提交于
      And make sure that everything using it explicitly includes
      that header file.
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      44696908
    • D
      sparc: Increase portability of strncpy_from_user() implementation. · 35c96460
      David S. Miller 提交于
      Hide details of maximum user address calculation in a new
      asm/uaccess.h interface named user_addr_max().
      
      Provide little-endian implementation in find_zero(), which should work
      but can probably be improved.
      
      Abstrace alignment check behind IS_UNALIGNED() macro.
      
      Kill double-semicolon, noticed by David Howells.
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      35c96460
    • L
      Merge tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 · 2f78d8e2
      Linus Torvalds 提交于
      Pull IEEE 1394 (FireWire) subsystem updates from Stefan Richter:
      
       - Fix mismatch between DMA mapping direction (was wrong) and DMA
         synchronization direction (was correct) of isochronous reception
         buffers of userspace drivers if vma-mapped for R/W access.  For
         example, libdc1394 was affected.
      
       - more consistent retry stategy in device discovery/ rediscovery, and
         improved failure diagnostics
      
       - various small cleanups, e.g. use SCSI layer's DMA mapping API in
         firewire-sbp2
      
      * tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
        firewire: sbp2: document the absence of alignment requirements
        firewire: sbp2: remove superfluous blk_queue_max_segment_size() call
        firewire: sbp2: use scsi_dma_(un)map
        firewire: sbp2: give correct DMA device to scsi framework
        firewire: core: fw_device_refresh(): clean up error handling
        firewire: core: log config rom reading errors
        firewire: core: log error in case of failed bus manager lock
        firewire: move rcode_string() to core
        firewire: core: improve reread_config_rom() interface
        firewire: core: wait for inaccessible devices after bus reset
        firewire: ohci: omit spinlock IRQ flags where possible
        firewire: ohci: correct signedness of a local variable
        firewire: core: fix DMA mapping direction
        firewire: use module_pci_driver
      2f78d8e2
    • L
      Merge branch 'drm-core-next' of git://people.freedesktop.org/~airlied/linux · f2fde3a6
      Linus Torvalds 提交于
      Pull main drm updates from Dave Airlie:
       "This is the main merge window request for the drm.
      
        It's big, but jam packed will lots of features and of course 0
        regressions.  (okay maybe there'll be one).
      
        Highlights:
      
         - new KMS drivers for server GPU chipsets: ast, mgag200 and cirrus
           (qemu only).  These drivers use the generic modesetting drivers.
      
         - initial prime/dma-buf support for i915, nouveau, radeon, udl and
           exynos
      
         - switcheroo audio support: so GPUs with HDMI can turn off the sound
           driver without crashing stuff.
      
         - There are some patches drifting outside drivers/gpu into x86 and
           EFI for better handling of multiple video adapters in Apple Macs,
           they've got correct acks except one trivial fixup.
      
         - Core:
      	edid parser has better DMT and reduced blanking support,
      	crtc properties,
      	plane properties,
      
         - Drivers:
      	exynos: add 2D core accel support, prime support, hdmi features
      	intel: more Haswell support, initial Valleyview support, more
      	    hdmi infoframe fixes, update MAINTAINERS for Daniel, lots of
      	    cleanups and fixes
      	radeon: more HDMI audio support, improved GPU lockup recovery
      	    support, remove nested mutexes, less memory copying on PCIE, fix
      	    bus master enable race (kexec), improved fence handling
      	gma500: cleanups, 1080p support, acpi fixes
      	nouveau: better nva3 memory reclocking, kepler accel (needs
      	    external firmware rip), async buffer moves on nv84+ hw.
      
        I've some more dma-buf patches that rely on the dma-buf merge for vmap
        stuff, and I've a few fixes building up, but I'd decided I'd better
        get rid of the main pull sooner rather than later, so the audio guys
        are also unblocked."
      
      Fix up trivial conflict due to some duplicated changes in
      drivers/gpu/drm/i915/intel_ringbuffer.c
      
      * 'drm-core-next' of git://people.freedesktop.org/~airlied/linux: (605 commits)
        drm/nouveau/nvd9: Fix GPIO initialisation sequence.
        drm/nouveau: Unregister switcheroo client on exit
        drm/nouveau: Check dsm on switcheroo unregister
        drm/nouveau: fix a minor annoyance in an output string
        drm/nouveau: turn a BUG into a WARN
        drm/nv50: decode PGRAPH DATA_ERROR = 0x24
        drm/nouveau/disp: fix dithering not being enabled on some eDP macbooks
        drm/nvd9/copy: initialise copy engine, seems to work like nvc0
        drm/nvc0/ttm: use copy engines for async buffer moves
        drm/nva3/ttm: use copy engine for async buffer moves
        drm/nv98/ttm: add in a (disabled) crypto engine buffer copy method
        drm/nv84/ttm: use crypto engine for async buffer copies
        drm/nouveau/ttm: untangle code to support accelerated buffer moves
        drm/nouveau/fbcon: use fence for sync, rather than notifier
        drm/nv98/crypt: non-stub implementation of the engine hooks
        drm/nouveau/fifo: turn all fifo modules into engine modules
        drm/nv50/graph: remove ability to do interrupt-driven context switching
        drm/nv50: remove manual context unload on context destruction
        drm/nv50: remove execution engine context saves on suspend
        drm/nv50/fifo: use hardware channel kickoff functionality
        ...
      f2fde3a6
    • L
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 28f3d717
      Linus Torvalds 提交于
      Pull more networking updates from David Miller:
       "Ok, everything from here on out will be bug fixes."
      
      1) One final sync of wireless and bluetooth stuff from John Linville.
         These changes have all been in his tree for more than a week, and
         therefore have had the necessary -next exposure.  John was just away
         on a trip and didn't have a change to send the pull request until a
         day or two ago.
      
      2) Put back some defines in user exposed header file areas that were
         removed during the tokenring purge.  From Stephen Hemminger and Paul
         Gortmaker.
      
      3) A bug fix for UDP hash table allocation got lost in the pile due to
         one of those "you got it..  no I've got it.." situations.  :-)
      
         From Tim Bird.
      
      4) SKB coalescing in TCP needs to have stricter checks, otherwise we'll
         try to coalesce overlapping frags and crash.  Fix from Eric Dumazet.
      
      5) RCU routing table lookups can race with free_fib_info(), causing
         crashes when we deref the device pointers in the route.  Fix by
         releasing the net device in the RCU callback.  From Yanmin Zhang.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (293 commits)
        tcp: take care of overlaps in tcp_try_coalesce()
        ipv4: fix the rcu race between free_fib_info and ip_route_output_slow
        mm: add a low limit to alloc_large_system_hash
        ipx: restore token ring define to include/linux/ipx.h
        if: restore token ring ARP type to header
        xen: do not disable netfront in dom0
        phy/micrel: Fix ID of KSZ9021
        mISDN: Add X-Tensions USB ISDN TA XC-525
        gianfar:don't add FCB length to hard_header_len
        Bluetooth: Report proper error number in disconnection
        Bluetooth: Create flags for bt_sk()
        Bluetooth: report the right security level in getsockopt
        Bluetooth: Lock the L2CAP channel when sending
        Bluetooth: Restore locking semantics when looking up L2CAP channels
        Bluetooth: Fix a redundant and problematic incoming MTU check
        Bluetooth: Add support for Foxconn/Hon Hai AR5BBU22 0489:E03C
        Bluetooth: Fix EIR data generation for mgmt_device_found
        Bluetooth: Fix Inquiry with RSSI event mask
        Bluetooth: improve readability of l2cap_seq_list code
        Bluetooth: Fix skb length calculation
        ...
      28f3d717
    • L
      Merge branch 'perf-uprobes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 654443e2
      Linus Torvalds 提交于
      Pull user-space probe instrumentation from Ingo Molnar:
       "The uprobes code originates from SystemTap and has been used for years
        in Fedora and RHEL kernels.  This version is much rewritten, reviews
        from PeterZ, Oleg and myself shaped the end result.
      
        This tree includes uprobes support in 'perf probe' - but SystemTap
        (and other tools) can take advantage of user probe points as well.
      
        Sample usage of uprobes via perf, for example to profile malloc()
        calls without modifying user-space binaries.
      
        First boot a new kernel with CONFIG_UPROBE_EVENT=y enabled.
      
        If you don't know which function you want to probe you can pick one
        from 'perf top' or can get a list all functions that can be probed
        within libc (binaries can be specified as well):
      
      	$ perf probe -F -x /lib/libc.so.6
      
        To probe libc's malloc():
      
      	$ perf probe -x /lib64/libc.so.6 malloc
      	Added new event:
      	probe_libc:malloc    (on 0x7eac0)
      
        You can now use it in all perf tools, such as:
      
      	perf record -e probe_libc:malloc -aR sleep 1
      
        Make use of it to create a call graph (as the flat profile is going to
        look very boring):
      
      	$ perf record -e probe_libc:malloc -gR make
      	[ perf record: Woken up 173 times to write data ]
      	[ perf record: Captured and wrote 44.190 MB perf.data (~1930712
      
      	$ perf report | less
      
      	  32.03%            git  libc-2.15.so   [.] malloc
      	                    |
      	                    --- malloc
      
      	  29.49%            cc1  libc-2.15.so   [.] malloc
      	                    |
      	                    --- malloc
      	                       |
      	                       |--0.95%-- 0x208eb1000000000
      	                       |
      	                       |--0.63%-- htab_traverse_noresize
      
      	  11.04%             as  libc-2.15.so   [.] malloc
      	                     |
      	                     --- malloc
      	                        |
      
      	   7.15%             ld  libc-2.15.so   [.] malloc
      	                     |
      	                     --- malloc
      	                        |
      
      	   5.07%             sh  libc-2.15.so   [.] malloc
      	                     |
      	                     --- malloc
      	                        |
      	   4.99%  python-config  libc-2.15.so   [.] malloc
      	          |
      	          --- malloc
      	             |
      	   4.54%           make  libc-2.15.so   [.] malloc
      	                   |
      	                   --- malloc
      	                      |
      	                      |--7.34%-- glob
      	                      |          |
      	                      |          |--93.18%-- 0x41588f
      	                      |          |
      	                      |           --6.82%-- glob
      	                      |                     0x41588f
      
      	   ...
      
        Or:
      
      	$ perf report -g flat | less
      
      	# Overhead        Command  Shared Object      Symbol
      	# ........  .............  .............  ..........
      	#
      	  32.03%            git  libc-2.15.so   [.] malloc
      	          27.19%
      	              malloc
      
      	  29.49%            cc1  libc-2.15.so   [.] malloc
      	          24.77%
      	              malloc
      
      	  11.04%             as  libc-2.15.so   [.] malloc
      	          11.02%
      	              malloc
      
      	   7.15%             ld  libc-2.15.so   [.] malloc
      	           6.57%
      	              malloc
      
      	 ...
      
        The core uprobes design is fairly straightforward: uprobes probe
        points register themselves at (inode:offset) addresses of
        libraries/binaries, after which all existing (or new) vmas that map
        that address will have a software breakpoint injected at that address.
        vmas are COW-ed to preserve original content.  The probe points are
        kept in an rbtree.
      
        If user-space executes the probed inode:offset instruction address
        then an event is generated which can be recovered from the regular
        perf event channels and mmap-ed ring-buffer.
      
        Multiple probes at the same address are supported, they create a
        dynamic callback list of event consumers.
      
        The basic model is further complicated by the XOL speedup: the
        original instruction that is probed is copied (in an architecture
        specific fashion) and executed out of line when the probe triggers.
        The XOL area is a single vma per process, with a fixed number of
        entries (which limits probe execution parallelism).
      
        The API: uprobes are installed/removed via
        /sys/kernel/debug/tracing/uprobe_events, the API is integrated to
        align with the kprobes interface as much as possible, but is separate
        to it.
      
        Injecting a probe point is privileged operation, which can be relaxed
        by setting perf_paranoid to -1.
      
        You can use multiple probes as well and mix them with kprobes and
        regular PMU events or tracepoints, when instrumenting a task."
      
      Fix up trivial conflicts in mm/memory.c due to previous cleanup of
      unmap_single_vma().
      
      * 'perf-uprobes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
        perf probe: Detect probe target when m/x options are absent
        perf probe: Provide perf interface for uprobes
        tracing: Fix kconfig warning due to a typo
        tracing: Provide trace events interface for uprobes
        tracing: Extract out common code for kprobes/uprobes trace events
        tracing: Modify is_delete, is_return from int to bool
        uprobes/core: Decrement uprobe count before the pages are unmapped
        uprobes/core: Make background page replacement logic account for rss_stat counters
        uprobes/core: Optimize probe hits with the help of a counter
        uprobes/core: Allocate XOL slots for uprobes use
        uprobes/core: Handle breakpoint and singlestep exceptions
        uprobes/core: Rename bkpt to swbp
        uprobes/core: Make order of function parameters consistent across functions
        uprobes/core: Make macro names consistent
        uprobes: Update copyright notices
        uprobes/core: Move insn to arch specific structure
        uprobes/core: Remove uprobe_opcode_sz
        uprobes/core: Make instruction tables volatile
        uprobes: Move to kernel/events/
        uprobes/core: Clean up, refactor and improve the code
        ...
      654443e2
    • M
      alpha: add io{read,write}{16,32}be functions · 25534eb7
      Michael Cree 提交于
      These functions are used in some PCI drivers with big-endian
      MMIO space.
      
      Admittedly it is almost certain that no one this side of the
      Moon would use such a card in an Alpha but it does get us
      closer to being able to build allyesconfig or allmodconfig,
      and it enables the Debian default generic config to build.
      Tested-by: NRaúl Porcel <armin76@gentoo.org>
      Signed-off-by: NMichael Cree <mcree@orcon.net.nz>
      Signed-off-by: NMatt Turner <mattst88@gmail.com>
      25534eb7
    • M
      alpha: implement various OSF/1 stat syscalls · 7a8bb98c
      Mans Rullgard 提交于
      This implements OSF/1 versions of stat, lstat, fstat, statfs64,
      and fstatfs64 syscalls.
      Signed-off-by: NMans Rullgard <mans@mansr.com>
      Signed-off-by: NMatt Turner <mattst88@gmail.com>
      7a8bb98c
    • M
      alpha: implement setsysinfo(SSI_LMF) as a no-op · 50744dee
      Mans Rullgard 提交于
      This allows running software using the Tru64 license manager.
      For simplicity, no check for a valid license is done.  This
      should not be seen as encouraging software piracy.
      Signed-off-by: NMans Rullgard <mans@mansr.com>
      Signed-off-by: NMatt Turner <mattst88@gmail.com>
      50744dee
    • L
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input · 2c01e7bc
      Linus Torvalds 提交于
      Pull input layer updates from Dmitry Torokhov:
       - a bunch of new drivers (DA9052/53 touchscreenn controller, Synaptics
         Navpoint, LM8333 keypads, Wacom I2C touhscreen);
       - updates to existing touchpad drivers (ALPS, Sntelic);
       - Wacom driver now supports Intuos5;
       - device-tree bindings in numerous drivers;
       - other cleanups and fixes.
      
      Fix annoying conflict in drivers/input/tablet/wacom_wac.c that I think
      implies that the input layer device naming is broken, but let's see.  I
      brough it up with Dmitry.
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits)
        Input: matrix-keymap - fix building keymaps
        Input: spear-keyboard - document DT bindings
        Input: spear-keyboard - add device tree bindings
        Input: matrix-keymap - wire up device tree support
        Input: matrix-keymap - uninline and prepare for device tree support
        Input: adp5588 - add support for gpio names
        Input: omap-keypad - dynamically handle register offsets
        Input: synaptics - fix compile warning
        MAINTAINERS: adjust input-related patterns
        Input: ALPS - switch to using input_mt_report_finger_count
        Input: ALPS - add semi-MT support for v4 protocol
        Input: Add Synaptics NavPoint (PXA27x SSP/SPI) driver
        Input: atmel_mxt_ts - dump each message on just 1 line
        Input: atmel_mxt_ts - do not read extra (checksum) byte
        Input: atmel_mxt_ts - verify object size in mxt_write_object
        Input: atmel_mxt_ts - only allow root to update firmware
        Input: atmel_mxt_ts - use CONFIG_PM_SLEEP
        Input: sentelic - report device's production serial number
        Input: tl6040-vibra - Device Tree support
        Input: evdev - properly handle read/write with count 0
        ...
      2c01e7bc
    • L
      Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media · ab11ca34
      Linus Torvalds 提交于
      Pull media updates from Mauro Carvalho Chehab:
       - some V4L2 API updates needed by embedded devices
       - DVB API extensions for ATSC-MH delivery system, used in US for mobile
         TV
       - new tuners for fc0011/0012/0013 and tua9001
       - a new dvb driver for af9033/9035
       - a new ATSC-MH frontend (lg2160)
       - new remote controller keymaps
       - Removal of a few legacy webcam driver that got replaced by gspca on
         several kernel versions ago
       - a new driver for Exynos 4/5 webcams(s5pp fimc-lite)
       - a new webcam sensor driver (smiapp)
       - a new video input driver for embedded (sta2x1xx)
       - several improvements, fixes, cleanups, etc inside the drivers.
      
      Manually fix up conflicts due to err() -> dev_err() conversion in
      drivers/staging/media/easycap/easycap_main.c
      
      * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (484 commits)
        [media] saa7134-cards: Remove a PCI entry added by mistake
        [media] radio-sf16fmi: add support for SF16-FMD
        [media] rc-loopback: remove duplicate line
        [media] patch for Asus My Cinema PS3-100 (1043:48cd)
        [media] au0828: Move the Kconfig knob under V4L_USB_DRIVERS
        [media] em28xx: simple comment fix
        [media] [resend] radio-sf16fmr2: add PnP support for SF16-FMD2
        [media] smiapp: Use v4l2_ctrl_new_int_menu() instead of v4l2_ctrl_new_custom()
        [media] smiapp: Add support for 8-bit uncompressed formats
        [media] smiapp: Allow generic quirk registers
        [media] smiapp: Use non-binning limits if the binning limit is zero
        [media] smiapp: Initialise rval in smiapp_read_nvm()
        [media] smiapp: Round minimum pre_pll up rather than down in ip_clk_freq check
        [media] smiapp: Use 8-bit reads only before identifying the sensor
        [media] smiapp: Quirk for sensors that only do 8-bit reads
        [media] smiapp: Pass struct sensor to register writing commands instead of i2c_client
        [media] smiapp: Allow using external clock from the clock framework
        [media] zl10353: change .read_snr() to report SNR as a 0.1 dB
        [media] media: add support to gspca/pac7302.c for 093a:2627 (Genius FaceCam 300)
        [media] m88rs2000 - only flip bit 2 on reg 0x70 on 16th try
        ...
      ab11ca34
  2. 24 5月, 2012 13 次提交