Remove IRQF_DISABLED since it is deprecated and a no-op in the
current kernel.
Signed-off-by: NHans J. Koch <hjk@linutronix.de>
Acked-by: NJohn Ogness <john.ogness@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove IRQF_DISABLED flag since it is deprecated and a no-op in the
current kernel.
Signed-off-by: NHans J. Koch <hjk@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (79 commits)
  powerpc/8xx: Add support for the MPC8xx based boards from TQC
  powerpc/85xx: Introduce support for the Freescale P1022DS reference board
  powerpc/85xx: Adding DTS for the STx GP3-SSA MPC8555 board
  powerpc/85xx: Change deprecated binding for 85xx-based boards
  powerpc/tqm85xx: add a quirk for ti1520 PCMCIA bridge
  powerpc/tqm85xx: update PCI interrupt-map attribute
  powerpc/mpc8308rdb: support for MPC8308RDB board from Freescale
  powerpc/fsl_pci: add quirk for mpc8308 pcie bridge
  powerpc/85xx: Cleanup QE initialization for MPC85xxMDS boards
  powerpc/85xx: Fix booting for P1021MDS boards
  powerpc/85xx: Fix SWIOTLB initalization for MPC85xxMDS boards
  powerpc/85xx: kexec for SMP 85xx BookE systems
  powerpc/5200/i2c: improve i2c bus error recovery
  of/xilinxfb: update tft compatible versions
  powerpc/fsl-diu-fb: Support setting display mode using EDID
  powerpc/5121: doc/dts-bindings: update doc of FSL DIU bindings
  powerpc/5121: shared DIU framebuffer support
  powerpc/5121: move fsl-diu-fb.h to include/linux
  powerpc/5121: fsl-diu-fb: fix issue with re-enabling DIU area descriptor
  powerpc/512x: add clock structure for Video-IN (VIU) unit
  ...

* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (49 commits)
  microblaze: Add KGDB support
  microblaze: Support brki rX, 0x18 for user application debugging
  microblaze: Remove nop after MSRCLR/SET, MTS, MFS instructions
  microblaze: Simplify syscall rutine
  microblaze: Move PT_MODE saving to delay slot
  microblaze: Fix _interrupt function
  microblaze: Fix _user_exception function
  microblaze: Put together addik instructions
  microblaze: Use delay slot in syscall macros
  microblaze: Save kernel mode in delay slot
  microblaze: Do not mix register saving and mode setting
  microblaze: Move SAVE_STATE upward
  microblaze: entry.S: Macro optimization
  microblaze: Optimize hw exception rutine
  microblaze: Implement clear_ums macro and fix SAVE_STATE macro
  microblaze: Remove additional setup for kernel_mode
  microblaze: Optimize SAVE_STATE macro
  microblaze: Remove additional loading
  microblaze: Completely remove working with R11 register
  microblaze: Do not setup BIP in _debug_exception
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  arch/sparc/mm: Use GFP_KERNEL
  MAINTAINERS: Add trailing slash to SBUS path.
  sbus: autoconvert trivial BKL users to private mutex

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] increase ia64 static per cpu area
  [IA64] Put ia64 config files on the Uwe Kleine-König diet
  [IA64] perfmon: convert to unlocked_ioctl
  [IA64] beautify vmlinux.lds.h

* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (150 commits)
  MIPS: PowerTV: Separate PowerTV USB support from non-USB code
  MIPS: strip the un-needed sections of vmlinuz
  MIPS: Clean up the calculation of VMLINUZ_LOAD_ADDRESS
  MIPS: Clean up arch/mips/boot/compressed/decompress.c
  MIPS: Clean up arch/mips/boot/compressed/ld.script
  MIPS: Unify the suffix of compressed vmlinux.bin
  MIPS: PowerTV: Add Gaia platform definitions.
  MIPS: BCM47xx: Fix nvram_getenv return value.
  MIPS: Octeon: Allow more than 3.75GB of memory with PCIe
  MIPS: Clean up notify_die() usage.
  MIPS: Remove unused task_struct.trap_no field.
  Documentation: Mention that KProbes is supported on MIPS
  SAMPLES: kprobe_example: Make it print something on MIPS.
  MIPS: kprobe: Add support.
  MIPS: Add instrunction format for BREAK and SYSCALL
  MIPS: kprobes: Define regs_return_value()
  MIPS: Ritually kill stupid printk.
  MIPS: Octeon: Disallow MSI-X interrupt and fall back to MSI interrupts.
  MIPS: Octeon: Support 256 MSI on PCIe
  MIPS: Decode core number for R2 CPUs.
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6:
  xtensa: Disable PCI and nfsroot on simulation target
  xtensa: Add missing include in coprocessor.h
  xtensa: Fix the network driver for the simulator target
  xtensa: Shuffle include statements to fix linker script
  xtensa: Add -mforce-no-pic option is supported
  xtensa: Fixes due to bss boundary symbol name changes.
  xtensa: Fix linker script patch-up
  xtensa: Fix FLUSH_DCACHE macro for some variants.

Signed-off-by: NNick Piggin <npiggin@kernel.dk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Separate USB code into a file separate from asic/asic_devices.

Separating the USB code from everything else in asic/asic_devices.c goes
a long way toward reducing the use of that file as a dumping ground for
everything that didn't seem to fit anywhere else.
Signed-off-by: NDavid VomLehn <dvomlehn@cisco.com>
To: linux-mips@linux-mips.org
Cc: greg@kroah.com
Cc: linux-usb@vger.kernel.org
Patchwork: http://patchwork.linux-mips.org/patch/1522/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch use "strip -s" to strip the .symtab and .strtab sections of
vmlinuz.

Note: This patch is based on http://patchwork.linux-mips.org/patch/1324/Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1383/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

We have calculated VMLINUZ_LOAD_ADDRESS in shell, which is indecipherable. This
patch rewrites it in C.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
To: linux-mips <linux-mips@linux-mips.org>
Cc: Alexander Clouter <alex@digriz.org.uk>
Cc: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NAlexander Clouter <alex@digriz.org.uk>
Patchwork: https://patchwork.linux-mips.org/patch/1324/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

- Remove several outdated comments
- Clearify the definition of zimage_start and zimage_size and the their
  usage
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1382/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

- Remove unused symbols: _fdata, _text; only _edata and _end are needed by
  head.S
- Remove unused sections: .sbss, .stab, .gptab.sdata, .gptab.sbss
- Change the alignment to 16 bytes to ensure it is greater than any
  fundamental type of a MIPS compiler.
- Clean up comments
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1381/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The compressed vmlinux.bin is only a temp file so it's ok to use the same
suffix .z for them (.gz,.lzo,.lzma...) to remove several lines and simpify
the maintenance (no need to add the "suffix_$(xxx) := suffix" line).
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
To: linux-mips <linux-mips@linux-mips.org>
Cc: Alexander Clouter <alex@digriz.org.uk>
Cc: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Patchwork: https://patchwork.linux-mips.org/patch/1323/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

---

Define ASIC address, memory preallocations, and initialization code for the
Gaia platform.
Signed-off-by: NDavid VomLehn <dvomlehn@cisco.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1519/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Nvram_getenv should behave like cfe_getenv. cfe_getenv returns 0 on
success and -9 if the value was not found. If the input was wrong -8
will be returned by cfe_getenv.  Change nvram_getenv to do the same.
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1520/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

We reserve the 3.75GB - 4GB region of PCIe address space for device to
device transfers, making the corresponding physical memory under
direct mapping unavailable for DMA.

To allow for PCIe DMA to all physical memory we map this chunk of
physical memory with BAR1.  Because of the resulting discontinuity in
the mapping function, we remove a page of memory at each end of the
range so multi-page DMA buffers can never be allocated that span the
range.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1535/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The sixth argument of notify_die() is a signal number, the fifth is a
trap number.

Instead of passing a signal number in a randomly selected argument,
pass it in the sixth.  Extract the exception code from regs and pass
that as the trap number.

Get rid of redundant cast, and remove some gratuitous spaces.

Nobody actually does anything with the signal number or trap number,
but we might as well populate them with sensible values.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1532/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

It is initialized to zero and only ever read.  Remove it, and pass zero in
its place.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1531/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

MIPS now has KProbes support, so kprobes.txt should reflect it.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: ananth@in.ibm.com
To: anil.s.keshavamurthy@intel.com
To: davem@davemloft.net
To: masami.hiramatsu.pt@hitachi.com
Cc: linux-kernel@vger.kernel.org
Cc: hschauhan@nulltrace.org
Patchwork: https://patchwork.linux-mips.org/patch/1527/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This KProbes example is a little useless if it doesn't print anything.
For MIPS print similar messages to those produced on x86 and PPC.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: ananth@in.ibm.com
To: anil.s.keshavamurthy@intel.com
To: davem@davemloft.net
To: masami.hiramatsu.pt@hitachi.com
Cc: linux-kernel@vger.kernel.org
Cc: hschauhan@nulltrace.org
Patchwork: https://patchwork.linux-mips.org/patch/1528/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch is based on previous work by Sony and Himanshu Chauhan.

I have done some cleanup and implemented JProbes and KRETPROBES.  The
KRETPROBES part is pretty much copied verbatim from powerpc.  A possible
future enhance might be to factor out the common code.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Cc: Himanshu Chauhan <hschauhan@nulltrace.org>
To: linux-mips@linux-mips.org
To: ananth@in.ibm.com,
To: anil.s.keshavamurthy@intel.com
To: davem@davemloft.net
To: masami.hiramatsu.pt@hitachi.com
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1525/
Patchwork: https://patchwork.linux-mips.org/patch/1530/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: ananth@in.ibm.com
To: anil.s.keshavamurthy@intel.com
To: davem@davemloft.net
To: masami.hiramatsu.pt@hitachi.com
Cc: linux-kernel@vger.kernel.org
Cc: hschauhan@nulltrace.org
Patchwork: https://patchwork.linux-mips.org/patch/1524/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: ananth@in.ibm.com
To: anil.s.keshavamurthy@intel.com
To: davem@davemloft.net
To: masami.hiramatsu.pt@hitachi.com
Cc: linux-kernel@vger.kernel.org,
Cc: hschauhan@nulltrace.org
Patchwork: https://patchwork.linux-mips.org/patch/1529/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This belongs into userland.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

MSI-X interrupts are not supported yet for Octeon, return error if
MSI-X interrupts are requested by driver so that the driver will fall
back to use MSI interrupts.
Signed-off-by: NChandrakala Chavva <cchavva@caviumnetworks.com>
To: linux-mips@linux-mips.org
Cc: David Daney <ddaney@caviumnetworks.com>
Patchwork: https://patchwork.linux-mips.org/patch/1506/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>

Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1507/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The struct cpuinfo_mips.core field should be populated with the
physical core number.  For R2 CPUs, this is carried in the low 10 bits
of Ebase.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1505/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

While at it, drop 0x prefix.
Signed-off-by: NKulikov Vasiliy <segooon@gmail.com>
To: kernel-janitors@vger.kernel.org
Cc: Chris Dearman <chris@mips.com>
Cc: "Robert P. J. Day" <rpjday@crashcourse.ca>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: André Goddard Rosa <andre.goddard@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1458/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

LOONGSON2_PERFCNT_IRQ is used for the irq number of the performance
overflow interrupts; LOONGSON_PERFCNT_IRQ is unused so remove it.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1494/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

On FuLoong-2F IP6 is shared by the performance counter overflow interrupt
and the Bonito northbridge interrupt.  To reduce overhead only call
do_IRQ() when oprofile is enabled to reduce overhead.

This patch adds an inline function do_perfcnt_IRQ() to hide the #if's ,
which can be shared by the other Loongson machines, i.e. gdium.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1492/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

set_irq_trigger_mode() is not needed on all platforms so remove it
and move the related source code to mach_init_irq().

This will allow gdium to share the common irq.c without adding an empty
set_irq_trigger_mode().
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1493/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The OCTEON is a MIPS64 based SOC family with an on chip watchdog unit.

The driver is split into two source files one for the C code and one
for assembly.  Assembly is needed to handle the NMI and then print the
machine state before the reboot is triggered.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Marc Zyngier <maz@misterjones.org>
Cc: Thierry Reding <thierry.reding@avionic-design.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
To: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org,
Patchwork: https://patchwork.linux-mips.org/patch/1503/Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 create mode 100644 drivers/watchdog/octeon-wdt-main.c
 create mode 100644 drivers/watchdog/octeon-wdt-nmi.S

This is used by the forthcoming OCTEON watchdog patch.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: wim@iguana.be
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1498/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The forthcoming Octeon watchdog driver will use them.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: wim@iguana.be
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1499/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The forthcoming watchdog driver will use it.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: wim@iguana.be
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1499/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

A 'select EXPORT_UASM' in Kconfig will cause the uasm to be exported
for use in modules.  When it is exported, all the uasm data and code
cease to be __init and __initdata.

Also daddiu_bug cannot be __cpuinitdata if uasm is exported.  The
cleanest thing is to just make it normal data.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: wim@iguana.be
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1500/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

These are OCTEON specific instructions.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: wim@iguana.be
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1496/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: wim@iguana.be
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1495/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>