Vertical flipping is available on both Gen2 and Gen3, while horizontal
flipping is only available on Gen3.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Allow reconfiguration of the alpha value at runtime.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

We don't need to walk the pipeline when propagating the alpha value as
all the information needed for propagation is already available from the
pipeline structure.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Allow reconfiguration of the look-up table and processing mode at
runtime.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Allow reconfiguration of the look-up table at runtime.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Controls are applied to the hardware in the configure operation of the
VSP entities, which is only called when starting the video stream. To
enable runtime modification of controls we need to call the configure
operations for every frame. Doing so is currently not safe, as most
parameters shouldn't be modified during streaming. Furthermore the
configure operation can sleep, preventing it from being called from the
frame completion interrupt handler for the next frame.

Fix this by adding an argument to the configure operation to tell
entities whether to perform a full configuration (as done now) or a
partial runtime configuration. In the latter case the operation will
only configure the subset of parameters related to runtime-configurable
controls, and won't be allowed to sleep when doing so.

Because partial reconfiguration can depend on parameters computed when
performing a full configuration, the core guarantees that the configure
operation will always be called with full and partial modes in that
order at stream start. Entities thus don't have to duplicate
configuration steps in the full and partial code paths.

This change affects the VSP driver core only, all entities return
immediately from the configure operation when called for a partial
runtime configuration. Entities will be modified one by one in further
commits.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The CLU processing block is a 2D/3D lookup table that converts the input
three color component data into desired three color components using a
lookup table.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Replace the custom ioctl with a V4L2 control in order to standardize the
API.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The LUT mutex isn't initialized when creating the LUT, fix it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Freeing a fragment requires freeing DMA coherent memory, which can be
performed with interrupts disabled as per the DMA mapping API contract.
The fragments can't thus be freed synchronously when a display list is
recycled. Instead, move the fragments to a garbage list and use a work
queue to run the garbage collection.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Initialize the function field of all subdev entities instantiated by the
driver. This gets rids of multiple warnings printed by the media
controller core.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The LIF is only used when feeding the VSP output to the DU. The only way
to do so is by controlling the VSP directly from the DU driver and
disabling the VSP userspace API. There is thus no need to create a LIF
entity when the userspace API is enabled, as it can't be used in that
case.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The media device doesn't need to be exposed to userspace when the VSP is
fully controlled by the DU driver. Don't register it in that case.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Check the entity pointer instead of the feature flag to see if the
entity is available before creating related links. The two methods are
currently equivalent, but will differ in the future as we implement
support for ignoring some of the entities present in the hardware.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The intensity control reused the V4L2_CID_CONTRAST control ID by
mistake. Fix it by using an ID from the device-specific IDs range.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The device is stopped when STREAMOFF is called on the last video node in
the pipeline. This results in possible memory corruption and/or crashes,
as userspace could free buffers while the hardware is still writing to
them, and the frame completion interrupt handler could try to access
buffers that don't exist anymore.

Fix this by stopping the pipeline upon the first STREAMOFF call, not the
last.
Reported-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The structures are never modified, make them const.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The vsp1_pipeline wq field is a wait queue, not a work queue. Fix the
comment accordingly.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The vsp1_pipeline_reset() function loops over pipeline inputs and output
and resets them. When doing so it assumes both that the pipeline has
been correctly configured with an output, and that inputs are are stored
in the pipe inputs array at positions 0 to num_inputs-1.

Both the assumptions are incorrect. The pipeline might need to be reset
after a failed attempts to configure it, without any output specified.
Furthermore, inputs are stored in a positiong equal to their RPF index,
possibly creating holes in the inputs array if the RPFs are not used in
sequence.

Fix both issues by looping over the whole inputs array and skipping
unused entries, and ignoring the output when not set.

Fixes: ff7e97c9 ("[media] v4l: vsp1: Store pipeline pointer in rwpf")
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The number of UDS and WPF are set to incorrect values, fix them.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The VI6_RPF_ALPH_SEL ALPHA0 and ALPHA1 fields are inverted, swap them.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The DRM driver has switched to the new API, remove the deprecated macros
and inline wrapper.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The vsp1_du_atomic_update_ext() function takes 7 RPF configuration
parameters, and more will likely be added later. This makes the code
difficult to read and error-prone as multiple parameters have the same
type.

Make the API safer and easier to extend in the future by grouping all
parameters in a structure. Use macro magic to ease the transition to the
new function by allowing the old and new functions to be called using
the same name. The macros and static inline wrapper will be removed as
soon as the caller is updated.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The frame sequence number is global to the pipeline, there's no need to
store copies in each video node.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Turn the helper into a function that can retrieve crop and compose
selection rectangles.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Add a macro to cast from a struct media_entity to a struct vsp1_entity
to replace the manual implementations.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The output node value indicates the value to be used in a sampling point
register to use the node as the source of histogram data.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

On some platforms the VSP performs memory accesses through an FCP. When
that's the case get a reference to the FCP from the VSP DT node and
enable/disable it at runtime as needed.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The power domain performs functional clock handling when using runtime
PM, there's no need to enable and disable the clock manually.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Replace the manual refcount and clock management code by runtime PM.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The maximum image size supported by the WPF is 2048x2048 on Gen2 and
8190x8190 on Gen3. Update the code accordingly, and fix the maximum LIF
size for both Gen2 and Gen3.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The format is erroneously defined with an alpha channel. Fix it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Make the global alpha multiplier of DRM planes configurable. All the
necessary infrastructure is there, we just need to store the alpha value
passed through the DRM API.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Make the Z-order of planes configurable by assigning RPFs to BRU inputs
dynamically based on the Z-order position.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The Gen3 RPF includes an alpha multiplier that can both multiply the
alpha channel by a fixed global alpha value, and multiply the pixel
components to convert the input to premultiplied alpha.

As alpha premultiplication is available in the BRU for both Gen2 and
Gen3 we handle it there and use the Gen3 alpha multiplier for global
alpha multiplication only. This prevents conversion to premultiplied
alpha if no BRU is present in the pipeline, that use case will be
implemented later if needed.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Synchronize the userspace LUT setup with the pipeline operation by using
a display list fragment to store LUT data.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Display lists support up to 8 bodies but we currently use a single one.
To support preparing display lists for large look-up tables, add support
for multi-body display lists.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The vsp1_dl_list_put() function expects to be called with the display
list manager lock held. This assumption is correct for calls from within
the vsp1_dl.c file, but not for the external calls. Fix it by taking the
lock inside the function and providing an unlocked version for the
internal callers.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The field takes positive values only, make it unsigned.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The LUT set format handler overrides the requested format by mistake.
Fix it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>