- 23 8月, 2008 6 次提交
-
-
由 Harvey Harrison 提交于
ieee80211_get_hdrlen_from_skb internally checks the skb is long enough to hold the full ieee80211_hdr, else it returns zero. Use ieee80211_hdrlen which always returns the hdrlen and check the remaining room in the skb explicitly when removing encryption headers or the qos control field. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bruno Randolf 提交于
use the rates ERP flag to derive CCK or OFDM modulation for the radiotap header. (it might be more correct to get this information from the hardware itself, but it seems safe to assume this in most practical cases.) Signed-off-by: NBruno Randolf <br1@einfach.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bruno Randolf 提交于
and use it for the radiotap header Signed-off-by: NBruno Randolf <br1@einfach.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch adds ieee80211_queue_stopped that let drivers to query queue status Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Robert P. J. Day 提交于
Use "menuconfig" to make wireless support one-click selectable. Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Julia Lawall 提交于
Converts a test in error handling code to a sequence of labels. The semantic match that found the problem is: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E,E1,E2; @@ E = alloc_etherdev(...) ... when != E = E1 if (...) { ... free_netdev(E); ... return ...; } ... when != E = E2 ( if (...) { ... when != free_netdev(E); return dev; } | * if (...) { ... when != free_netdev(E); return ...; } | register_netdev(E) ) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 21 8月, 2008 2 次提交
-
-
由 Jarek Poplawski 提交于
dev_deactivate() can skip rescheduling of a qdisc by qdisc_watchdog() or other timer calling netif_schedule() after dev_queue_deactivate(). We prevent this checking aliveness before scheduling the timer. Since during deactivation the root qdisc is available only as qdisc_sleeping additional accessor qdisc_root_sleeping() is created. With feedback from Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
All of the SCTP-AUTH socket options could cause a panic if the extension is disabled and the API is envoked. Additionally, there were some additional assumptions that certain pointers would always be valid which may not always be the case. This patch hardens the API and address all of the crash scenarios. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 8月, 2008 13 次提交
-
-
由 David S. Miller 提交于
If dev_deactivate() is trying to quiesce the queue, it is theoretically possible for another cpu to livelock trying to process that queue. This happens because dev_deactivate() grabs the queue spinlock as it checks the queue state, whereas net_tx_action() does a trylock and reschedules the qdisc if it hits the lock. This breaks the livelock by adding a check on __QDISC_STATE_DEACTIVATED to net_tx_action() when the trylock fails. Based upon feedback from Herbert Xu and Jarek Poplawski. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This reverts commit 1cfa2666. qdisc_destroy() runs fully under RTNL again and not from softint any longer, so this change is no longer needed. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This reverts commit d4766692. qdisc_destroy() now runs in RTNL fully again, so this change is no longer needed. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
...Last block local var got just deleted. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Use incoming network tuple as seed for NAT port randomization. This avoids concerns of leaking net_random() bits, and also gives better port distribution. Don't have NAT server, compile tested only. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> [ added missing EXPORT_SYMBOL_GPL ] Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pablo Neira Ayuso 提交于
This patch removes a GFP_KERNEL allocation while holding a spin lock with bottom halves disabled in ctnetlink_change_helper(). This problem was introduced in 2.6.23 with the netfilter extension infrastructure. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pablo Neira Ayuso 提交于
Fix allocation with GFP_KERNEL in ctnetlink_create_conntrack() under read-side lock sections. This problem was introduced in 2.6.25. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pablo Neira Ayuso 提交于
If we create a conntrack that has NAT handlings and a helper, the helper is assigned twice. This happens because nf_nat_setup_info() - via nf_conntrack_alter_reply() - sets the helper before ctnetlink, which indeed does not check if the conntrack already has a helper as it thinks that it is a brand new conntrack. The fix moves the helper assignation before the set of the status flags. This avoids a bogus assertion in __nf_ct_ext_add (if netfilter assertions are enabled) which checks that the conntrack must not be confirmed. This problem was introduced in 2.6.23 with the netfilter extension infrastructure. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NPatrick McHardy <kaber@trash.net>
-
由 Anders Grafström 提交于
This patch fixes matching of inverted destination address type. Signed-off-by: NAnders Grafström <grfstrm@users.sourceforge.net> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gerrit Renker 提交于
Thanks is due to Wei Yongjun for the detailed analysis and description of this bug at http://marc.info/?l=dccp&m=121739364909199&w=2 The problem is that invalid packets received by a client in state REQUEST cause the retransmission timer for the DCCP-Request to be reset. This includes freeing the Request-skb ( in dccp_rcv_request_sent_state_process() ). As a consequence, * the arrival of further packets cause a double-free, triggering a panic(), * the connection then may hang, since further retransmissions are blocked. This patch changes the order of statements so that the retransmission timer is reset, and the pending Request freed, only if a valid Response has arrived (or the number of sysctl-retries has been exhausted). Further changes: ---------------- To be on the safe side, replaced __kfree_skb with kfree_skb so that if due to unexpected circumstances the sk_send_head is NULL the WARN_ON is used instead. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Based upon reports by Denys Fedoryshchenko, and feedback and help from Jarek Poplawski and Herbert Xu. We always either: 1) Never made an external reference to this qdisc. or 2) Did a dev_deactivate() which purged all asynchronous references. So do not lock the qdisc when we call qdisc_destroy(), it's illegal anyways as when we drop the lock this is free'd memory. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
Qdisc locks are initialized in the same function, qdisc_alloc(), so lockdep can't distinguish tx qdisc lock from rx and reports "possible recursive locking detected" when both these locks are taken eg. while using act_mirred with ifb. This looks like a false positive. Anyway, after this patch these locks will be reported more exactly. Reported-by: NDenys Fedoryshchenko <denys@visp.net.lb> Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Based upon initial discovery and patch by Jarek Poplawski. The qdisc watchdogs can be attached to any qdisc, not just the root, so make sure we schedule the correct one. CBQ has a similar bug. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 8月, 2008 14 次提交
-
-
由 Ron Rindjunsky 提交于
This patch fixes needless probe request caused by zero value in sta->last_rx inside ieee80211_associated flow Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
Guard rfkill controllers attached to a rfkill class against state changes after class suspend has been issued. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Marcel Holtmann 提交于
The Bluetooth entries for the MAINTAINERS file are a little bit too much. Consolidate them into two entries. One for Bluetooth drivers and another one for the Bluetooth subsystem. Also the MODULE_AUTHOR should indicate the current maintainer of the module and actually not the original author. Fix all Bluetooth modules to provide current maintainer information. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
The Bluetooth adapters and connections are best presented via a class in sysfs. The removal of the links inside the Bluetooth class broke assumptions by userspace programs on how to find attached adapters. This patch creates adapters and connections as part of the Bluetooth class, but it uses different device types to distinguish them. The userspace programs can now easily navigate in the sysfs device tree. The unused platform device and bus have been removed to keep the code simple and clean. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 David S. Miller 提交于
Based upon a bug report by Josip Rodin. Packet schedulers should only return NET_XMIT_DROP iff the packet really was dropped. If the packet does reach the device after we return NET_XMIT_DROP then TCP can crash because it depends upon the enqueue path return values being accurate. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Noticed by Jarek Poplawski. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yang Hongyang 提交于
When get receiving interface index while no message is received, the bounded device's index of the socket should be returned. RFC 3542: Issuing getsockopt() for the above options will return the sticky option value i.e., the value set with setsockopt(). If no sticky option value has been set getsockopt() will return the following values: - For the IPV6_PKTINFO option, it will return an in6_pktinfo structure with ipi6_addr being in6addr_any and ipi6_ifindex being zero. Signed-off-by: NYang Hongyang <yanghy@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jussi Kivilinna 提交于
Use return value from inner qdisc requeue when value returned isn't NET_XMIT_SUCCESS, instead of always returning NET_XMIT_DROP. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
We can now kill them synchronously with all of the previous dev_deactivate() cures. This makes netdev destruction and shutdown saner as the qdiscs hold references to the device. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
From: Jarek Poplawski <jarkao2@gmail.com> When we are destroying non-root qdiscs, we need to lock the root of the qdisc tree not the the qdisc itself. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
The condition under which the previous qdisc has no more references after we've attached &noop_qdisc is that both RUNNING and SCHED are both seen clear while holding the root lock. So just make specifically that check in the polling loop, instead of this overly complex "check without then check with lock held" sequence. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
Change handling of the __QDISC_STATE_SCHED flag in net_tx_action() to enable proper control in dev_deactivate(). Now, if this flag is seen as unset under root_lock means a qdisc can't be netif_scheduled. Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This new state lets dev_deactivate() mark a qdisc as having been deactivated. dev_queue_xmit() and ing_filter() check for this bit and do not try to process the qdisc if the bit is set. dev_deactivate() polls the qdisc after setting the bit, waiting for both __QDISC_STATE_RUNNING and __QDISC_STATE_SCHED to clear. This isn't perfect yet, but subsequent changesets will make it so. This part is just one piece of the puzzle. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 8月, 2008 4 次提交
-
-
由 Rusty Russell 提交于
There's an skb_copy_datagram_iovec() to copy out of a paged skb, but nothing the other way around (because we don't do that). We want to allocate big skbs in tun.c, so let's add the function. It's a carbon copy of skb_copy_datagram_iovec() with enough changes to be annoying. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
skb_gso_segment didn't preserve some attributes in the original skb such as the netfilter fields. This was harmless until they were used which is the case for packets going through lo. This patch makes it call __copy_skb_header which also picks up some other missing attributes. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Add more ethtool generic operations to dump the bridge offload settings. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
Let me first state that disabling the route cache hash rebuild should not be done without extensive analysis on the risk profile and careful deliberation. However, there are times when this can be done safely or for testing. For example, when you have mechanisms for ensuring that offending parties do not exist in your network. This patch lets the user disable the rebuild if the interval is set to zero. This also incidentally fixes a divide-by-zero error with name-spaces. In addition, this patch makes the effect of an interval change immediate rather than it taking effect at the next rebuild as is currently the case. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 8月, 2008 1 次提交
-
-
由 Jarek Poplawski 提交于
Fix a bug with spin_lock_bh() inserted instead of spin_unlock_bh() by some recent patch. Reported-by: NDenys Fedoryshchenko <denys@visp.net.lb> Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-