Whoops.

kobject_register failed for hexium HV-PCI6/Orion (-13)
[<c01d3eb6>] kobject_register+0x31/0x47
[<c023a996>] bus_add_driver+0x4a/0xfd
[<c01de3c1>] __pci_register_driver+0x82/0xa4
[<d083400a>] hexium_init_module+0xa/0x47 [hexium_orion]
[<c013bdae>] sys_init_module+0x167b/0x1822
[<c01633f7>] do_sync_read+0xb8/0xf3
[<c0133fa3>] autoremove_wake_function+0x0/0x2d
[<c0145390>] audit_syscall_entry+0x118/0x13f
[<c0106ae2>] do_syscall_trace+0x104/0x14a
[<c0103d21>] syscall_call+0x7/0xb

slashes in kobject names aren't allowed.
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Some symbols at cx88-alsa were global. Making those static.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- When a firmware was downloaded dvb_usb_device_init returns NULL for the
  dvb_usb_device, then nothing should be done with that pointer and device,
  because it will re-enumerate.
- A new firmware should be used with digitv devices. 
- It should make "slave"-devices work and others, too.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Reassigning function pointers in a static led to infinite loops when using
multiple VP7045-based device at the same time on one system. Using kmalloc'd
copies for reassignments is better.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Use the parallel transport function of the MT352 demodulator in
TH7579 and LGZ201 -based FusionHDTV Bluebird usb boxes.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Use the parallel transport function of the MT352 in USB demodulator of the
Dual Digital board.
Signed-off-by: NChris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

support for Galaxis DVB-S rev1.3 (subsystem 13c2:0004)
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

fixed i2c return value, conversion mdelay to msleep
Signed-off-by: NMarkus Rechberger <mrechberger@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

South Korea uses NTSC-M but with A2 audio instead of BTSC. Several audio
chips need this information in order to set the correct audio processing
registers.
Acked-by: NMauro Carvalho Chehab <mauro_chehab@yahoo.com.br>
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

add IR support to KWorld DVB-T (cx22702-based)
Signed-off-by: NMarco Manenti <marco_manenti@colman.it>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

With DVB drivers enabled snd_87x (ALSA) don't detect.
Signed-off-by: NManu Abraham <manu@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- added signal detection support to tvp5150
Signed-off-by: NMarkus Rechberger <mrechberger@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Apparently, having the number of lines fixed at 4 reduces (or even kills)
the buzz found in NICAM stereo with analog sound.
Signed-off-by: NMarcin Rudowski <mar_rud@poczta.onet.pl>
Signed-off-by: NRicardo Cerqueira <v4l@cerqueira.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- rename DVB_USB_CXUSB one-liner description to:
  Conexant USB2.0 hybrid reference design support.
- with the addition of bluebird support to dvb-usb-cxusb,
  it now depends on lgdt330x and mt352 modules.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- V4L/DVB Maintainers list changed. This patch alters the email to the
  new address.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
Acked-By: NJohannes Stezenbach <js@linuxtv.org>

- allow tristate build for cx88-vp3054-i2c
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

memset clears once set structure, there is actually no need for memset,
because configure function do it for us.  Next, vfree(NULL) is legal, so
avoid useless labels.

Thanks Dave Jones for reporting this.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- changed comment in tuner-core.c
Signed-off-by: NMarkus Rechberger <mrechberger@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Fix printk type warning:
drivers/media/dvb/b2c2/flexcop-pci.c:164: warning:
format '%08x' expects type 'unsigned int', but argument 4 has type 'dma_addr_t'
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- fixed spelling error, exectuted --> executed.
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- default_tuner_init was called twice due to a missing break statement.
Signed-off-by: NMarkus Rechberger <mrechberger@gmail.com>
Acked-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Make needlessly global code static
- #if 0 the following unused global functions:
- b2c2/flexcop-dma.c: flexcop_dma_control_packet_irq()
- b2c2/flexcop-dma.c: flexcop_dma_config_packet_count()
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- The tda9887 has an I2C id reserved for it, but it hasn't been using
it.  Probably an oversight.  Fixed with this patch.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- make VP-3054 Secondary I2C Bus Support a Kconfig option.
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Recognise Hauppauge card #34519
Signed-off-by: NIan Pickworth <ian@pickworth.me.uk>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- rename dvb_pll_tbmv30111in to dvb_pll_samsung_tbmv
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Kill nxt2002 module in favor of nxt200x.
- Repair broken nxt2002 support in the nxt200x module.
- Make the flexcop driver use nxt200x instead of the nxt2002 module for the
  Air2PC 2nd generation PCI card.
- Remove the nxt2002 module from cvs and kernel build.
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Mark Typhoon cards as OEM of Lifeview.
Signed-off-by: NPeter Missel <peter.missel@onlinehome.de>
Signed-off-by: NNickolay V. Shmyrev <nshmyrev@yandex.ru>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Tvp5150 type were determined by a secondary register instead of
  using ROM code.
- tvp5150am1 have ROM=4.0, while tvp5150a have ROM=3.33 (decimal).
  All other ROM versions are reported as unknown tvp5150.
- Except for reporting, current code doesn't enable any special feature
  for tvp5150am1 or tvp5150a. Code should work for both models (but were
  tested only for tvp5150am1).
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- VIDEO_CX88_ALSA must select SND_PCM
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Add probe check for the tda9840 to prevent misdetection of a Micronas
  dpl3518a as a tda9840.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Add PCI ID for DigitalNow DVB-T Dual,
rebranded DViCO FusionHDTV DVB-T Dual.
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Added credits for sn9c102 kernel module and his author as
some parts of em28xx-video were based.
Acked-by: NLuca Risolia <luca.risolia@studio.unibo.it>
Acked-by: NMarkus Rechberger <mrechberger@gmail.com>
Acked-by: NLudovico Cavedon <cavedon@sssup.it>
Acked-by: NSascha Sommer <saschasommer@freenet.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The compat layer timeout handling changes in:

9f72949f

are busted.  This is most easily seen with an X application
that uses sub-second select/poll timeout such as emacs.  You
hit a key and it takes a second or so before the app responds.

The two ROUND_UP() calls upon entry are using {tv,ts}_sec where it
should instead be using {tv_usec,ts_nsec}, which perfectly explains
the observed incorrect behavior.

Another bug shot down with git bisect.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Or else we break on ppc32 and other 32-bit platforms.

Based upon a patch from Harald Welte.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>