- 29 10月, 2010 3 次提交
-
-
由 Maurus Cuelenaere 提交于
This way we don't need to modify Kconfig every time a new SoC comes along to make this driver support it. Also fix some typos while I'm at it. Signed-off-by: NMaurus Cuelenaere <mcuelenaere@gmail.com> Reviewed-by: NGuenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
I was wondering if that chip ever existed publicly... Apparently yes, so add support for it. Signed-off-by: NJean Delvare <khali@linux-fr.org> Tested-by: NAlexander Stein <alexander.stein@informatik.tu-chemnitz.de> Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
由 Guenter Roeck 提交于
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 26 10月, 2010 2 次提交
-
-
由 Simon Guinot 提交于
This patch adds hwmon support for fans connected to GPIO lines. Platform specific information such as GPIO pinout and speed conversion array (rpm from/to GPIO value) are passed to the driver via platform_data. Signed-off-by: NSimon Guinot <sguinot@lacie.com> Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
由 Guenter Roeck 提交于
This driver adds support for Linear Technology LTC4261 I2C Negative Voltage Hot Swap Controller. Reviewed-by: NIra W. Snyder <iws@ovro.caltech.edu> Reviewed-by: NTom Grennan <tom.grennan@ericsson.com> Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
- 21 10月, 2010 1 次提交
-
-
由 Jean Delvare 提交于
The hdaps driver isn't a hardware monitoring driver, so it shouldn't live under driver/hwmon. drivers/platform/x86 seems much more appropriate, as the driver is only useful on x86 laptops. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Frank Seidel <frank@f-seidel.de> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
- 25 9月, 2010 1 次提交
-
-
由 Jan Beulich 提交于
Other than coretemp, from which this code was apparently derived, there is no PCI specific code in this driver. Signed-off-by: NJan Beulich <jbeulich@novell.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
- 21 8月, 2010 1 次提交
-
-
由 Andrew Morton 提交于
Revert commit 7721fea3 ("hwmon: f71882fg: add support for the Fintek F71808E"). Hans said: : A second review after I've received a data sheet for this device from : Fintek has turned up a few bugs. : : Unfortunately Giel (nor I) have time to fix this in time for the 2.6.36 : cycle. Therefor I would like to see this patch reverted as not having any : support for the hwmon function of this superio chip is better then having : unreliable support. Cc: Giel van Schijndel <me@mortis.eu> Cc: Jean Delvare <khali@linux-fr.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 8月, 2010 4 次提交
-
-
由 Randy Dunlap 提交于
jc42 uses i2c interfaces, so it should depend on I2C. drivers/hwmon/jc42.c:426: error: implicit declaration of function 'i2c_check_functionality' drivers/hwmon/jc42.c:521: error: implicit declaration of function 'i2c_smbus_read_word_data' drivers/hwmon/jc42.c:529: error: implicit declaration of function 'i2c_smbus_write_word_data' drivers/hwmon/jc42.c:580: error: implicit declaration of function 'i2c_add_driver' drivers/hwmon/jc42.c:585: error: implicit declaration of function 'i2c_del_driver' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
Add support for the 6 temperature monitoring channels of the PC87427. Note that the sensors resolution can vary, and I couldn't find a way to figure it out, so we might have to compensate in user-space. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
由 Jean Delvare 提交于
Add initial support for PWM outputs of the PC87427 Super-I/O chip. Only mode change and manual fan speed control are supported. Automatic mode configuration isn't supported, and won't be until at least one board is known, which makes uses of the PWM outputs. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
由 Steve Glendinning 提交于
SMSC's EMC2103 family of temperature/fan controllers have 1 onboard and up to 3 external temperature sensors, and allow closed-loop control of one fan. This patch adds support for them. Signed-off-by: NSteve Glendinning <steve.glendinning@smsc.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 10 8月, 2010 4 次提交
-
-
由 Giel van Schijndel 提交于
Allow device probing to recognise the Fintek F71808E. Sysfs interface: * Fan/pwm control is the same as for F71889FG * Temperature and voltage sensor handling is largely the same as for the F71889FG - Has one temperature sensor less (doesn't have temp3) - Misses one voltage sensor (doesn't have V6, thus in6_input refers to what in7_input refers for F71889FG) For the purpose of the sysfs interface fxxxx_in_temp_attr[] is split up such that it can largely be reused. Signed-off-by: NGiel van Schijndel <me@mortis.eu> Cc: Jean Delvare <khali@linux-fr.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Chen Gong 提交于
Update coretemp supported CPU TjMax lists and some cleanup work. Signed-off-by: NChen Gong <gong.chen@linux.intel.com> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Huaxu Wan <huaxu.wan@intel.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Guenter Roeck 提交于
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Guenter Roeck 提交于
This driver adds support for the monitoring features of the Summit Microelectronics SMM665 Six-Channel Active DC Output Controller/Monitor. Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com> Acked-by: NJonathan Cameron <jic23@cam.ac.uk> Cc: Jean Delvare <khali@linux-fr.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 05 8月, 2010 1 次提交
-
-
由 Lars-Peter Clausen 提交于
Add support for reading the ADCIN pin of the ADC unit on JZ4740 SoCs. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Cc: lm-sensors@lm-sensors.org Acked-by: NJean Delvare <khali@linux-fr.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1425/Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 04 8月, 2010 1 次提交
-
-
由 Fenghua Yu 提交于
This patch adds a hwmon driver for package level thermal control. The driver dumps package level thermal information through sysfs interface so that upper level application (e.g. lm_sensor) can retrive the information. Instead of having the package level hwmon code in coretemp, I write a seperate driver pkgtemp because: First, package level thermal sensors include not only sensors for each core, but also sensors for uncore, memory controller or other components in the package. Logically it will be clear to have a seperate hwmon driver for package level hwmon to monitor wider range of sensors in a package. Merging package thermal driver into core thermal driver doesn't make sense and may mislead. Secondly, merging the two drivers together may cause coding mess. It's easier to include various package level sensors info if more sensor information is implemented. Coretemp code needs to consider a lot of legacy machine cases. Pkgtemp code only considers platform starting from Sandy Bridge. On a 1Sx4Cx2T Sandy Bridge platform, lm-sensors dumps the pkgtemp and coretemp: pkgtemp-isa-0000 Adapter: ISA adapter physical id 0: +33.0°C (high = +79.0°C, crit = +99.0°C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +32.0°C (high = +79.0°C, crit = +99.0°C) coretemp-isa-0001 Adapter: ISA adapter Core 1: +32.0°C (high = +79.0°C, crit = +99.0°C) coretemp-isa-0002 Adapter: ISA adapter Core 2: +32.0°C (high = +79.0°C, crit = +99.0°C) coretemp-isa-0003 Adapter: ISA adapter Core 3: +32.0°C (high = +79.0°C, crit = +99.0°C) [ hpa: folded v3 patch removing improper global variable "SHOW" ] Signed-off-by: NFenghua Yu <fenghua.yu@intel.com> LKML-Reference: <1280448826-12004-3-git-send-email-fenghua.yu@intel.com> Reviewed-by: NLen Brown <len.brown@intel.com> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 28 5月, 2010 5 次提交
-
-
由 Shubhrajyoti Datta 提交于
Add support for the Texas Instruments TMP105 temperature sensor device. Signed-off-by: NShubhrajyoti Datta <shubhrajyoti@ti.com> Acked-by: NJonathan Cameron <jic23@cam.ac.uk> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
Fixes from my driver review: http://lists.lm-sensors.org/pipermail/lm-sensors/2010-March/028051.html Only the small changes are in there, more important changes will come later separately as time permits. * Drop the remnants of the now gone detect function * The TMP102 has no known compatible chip * Include the right header files * Clarify why byte swapping of register values is needed * Strip resolution info bit from temperature register value * Set cache lifetime to 1/3 second * Don't arbitrarily reject limit values; clamp as needed * Make limit writing unconditional * Don't check for transaction types the driver doesn't use * Properly check for error when setting configuration * Report error on failed probe * Make the driver load automatically where needed * Various other minor fixes Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Steven King <sfking@fdwdc.com>
-
由 Steven King 提交于
Driver for the TI TMP102. The TI TMP102 is similar to the LM75. It differs from the LM75 by having a 16-bit conf register and the temp registers have a minimum resolution of 12 bits; the extended conf register can select 13-bit resolution (which this driver does) and also change the update rate (which this driver currently doesn't use). [JD: Fix tmp102_exit tag, must be __exit, not __init.] Signed-off-by: NSteven King <sfking@fdwdc.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Kalhan Trisal 提交于
Provides support for the EMC1403 thermal sensor. Only reporting of values is supported. The various Moorestown specific extras to do with thermal alerts and the like are not in this version of the driver. Considerably edited and tidied up by Alan Cox, plus fixes and detection bits from Jean Delvare. Signed-off-by: NKalhan Trisal <kalhan.trisal@intel.com> Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Matthew Garrett 提交于
The LM64 appears to be an LM63 with added GPIO lines. Add support for the hwmon functionality - GPIO can be added at some later stage if someone has a need for them. Signed-off-by: NMatthew Garrett <mjg@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 25 5月, 2010 1 次提交
-
-
由 Paul Thomas 提交于
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NPaul Thomas <pthomas8589@gmail.com> Cc: Jonathan Cameron <jic23@cam.ac.uk> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 30 3月, 2010 1 次提交
-
-
由 Jaswinder Singh Rajput 提交于
Intel X58 have asc7621a chip. So added X58 entry in Kconfig for asc7621. Also arranged existing models in ascending order. Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 06 3月, 2010 5 次提交
-
-
由 Amerigo Wang 提交于
adt7473 driver is obsoleted by adt7475 driver. And it is scheduled to be removed in Feb 2010. Signed-off-by: NWANG Cong <amwang@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 George Joseph 提交于
Hwmon driver for Andigilog aSC7621 family monitoring chips. Signed-off-by: NGeorge Joseph <george.joseph@fairview5.com> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Wolfram Sang 提交于
Add basic support for the ADT7411. Reads out all conversion results (via I2C, SPI yet missing) and allows some on-the-fly configuration. Tested with a custom board. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Sven Anders 提交于
Add watchdog functionality to the Winbond W83793 driver. Signed-off-by: NSven Anders <anders@anduras.de> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
This chips is found on several Zotac Ion ITX boards, amongst others. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: MC Matti <mcmatti17@googlemail.com> Cc: Manuel Lamotte-Schubert <mls@pronego.com>
-
- 12 1月, 2010 1 次提交
-
-
由 Tomaz Mertelj 提交于
Signed-off-by: <tomaz.mertelj@guest.arnes.si> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 1月, 2010 1 次提交
-
-
由 Yong Wang 提交于
The max junction temperature of Atom N450/D410/D510 CPUs is 100 degrees Celsius. Since these CPUs are always coupled with Intel NM10 chipset in one package, the best way to verify whether an Atom CPU is N450/D410/D510 is to check the host bridge device. Signed-off-by: NYong Wang <yong.y.wang@intel.com> Acked-by: NHuaxu Wan <huaxu.wan@intel.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 18 12月, 2009 1 次提交
-
-
由 Samu Onkalo 提交于
Signed-off-by: NSamu Onkalo <samu.p.onkalo@nokia.com> Cc: Éric Piel <eric.piel@tremplin-utc.net> Cc: Kalhan Trisal <kalhan.trisal@intel.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 12月, 2009 2 次提交
-
-
由 Harald Welte 提交于
This is a driver for the on-die digital temperature sensor of VIA's recent CPU models. [JD: Misc clean-ups.] Signed-off-by: NHarald Welte <HaraldWelte@viatech.com> Cc: Juerg Haefliger <juergh@gmail.com> Signed-off-by: NJean Delvare <khali@linux-fr.org> Tested-by: NAdam Nielsen <a.nielsen@shikadi.net>
-
由 Clemens Ladisch 提交于
This adds a driver for the internal temperature sensor of AMD Family 10h and 11h CPUs. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 16 12月, 2009 1 次提交
-
-
由 Éric Piel 提交于
Most of the documentation and comments were written when the driver was only supporting one type of chip, only via ACPI/HP. Update the info to the much clearer understanding that we have now. Signed-off-by: NÉric Piel <eric.piel@tremplin-utc.net> Signed-off-by: NSamu Onkalo <samu.p.onkalo@nokia.com> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 12月, 2009 4 次提交
-
-
由 Jean Delvare 提交于
The ADT7476 has 5 dedicated pins for VID input, and the +12V input can optionally be used as a 6th VID pin. Add support for VID input. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: "Darrick J. Wong" <djwong@us.ibm.com>
-
由 Jean Delvare 提交于
Add support for the Analog Devices ADT7476 chip. This chip is largely compatible with the ADT7473 and ADT7475, with additional features. In particular, it has 5 voltage inputs instead of 2, and VID input pins. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: "Darrick J. Wong" <djwong@us.ibm.com>
-
由 Jean Delvare 提交于
Add support for the Analog Devices ADT7490 chip. This chip is largely compatible with the ADT7473 and ADT7475, with additional features. In particular, it has 6 voltage inputs instead of 2. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: "Darrick J. Wong" <djwong@us.ibm.com>
-
由 Jean Delvare 提交于
Add support for the ADT7473 to the adt7475 driver, and mark the adt7473 driver for removal. The ADT7473 and ADT7475 chips are almost the same chip and essentially compatible, so there's no point in having separate drivers for them. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: "Darrick J. Wong" <djwong@us.ibm.com>
-