The ioctl DMX_GET_EVENT has never been implemented.
I guess no software is using it because of its lack of implementation.
Future software won't use it, too, because this API doesn't make much
sense the way it is: Frontend events have their own different API.
Scrambling events can't be generated in a useful way by the hardware I
know of.
Signed-off-by: NAndreas Oberritter <obi@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

A few lines that do nothing in the or51132 frontend, removed.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

As QAM_64, QAM_256, and QAM_AUTO all use the same firmware, switching
between these modulations doesn't require a firmware re-load.  This also
fixes a mishandled error condition, in which the firmware file is loaded
into the kernel, the clock mode is changed, but then the firmware upload
to the device fails.  The modulation change is aborted, but the clock
mode would still be changed.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

It's "Terrestrial"
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Use new routing input defines in em28xx-cards.c
- Fix S-Video settings for tvp5150-based cards (input was copied from saa7115
  based cards and worked only because S-Video was selected in the default: case)
- Replace VIDIOC_S_INPUT by VIDIOC_INT_S_VIDEO_ROUTING in em28xx-video.c
- Remove the now obsolete VIDIOC_S_INPUT handler in saa7115.c
- Add VIDIOC_INT_G/S_VIDEO_ROUTING in tvp5150.c
- Add new media/tvp5150.h with the routing defines.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Some saa7115-based cards use a different crystal frequency and a different
audio clock generation. Add a new VIDIOC_INT_S_CRYSTAL_FREQ command to be
able to set these values.
Also change the default APLL setting to 0. It makes no sense to have the
audio clock independent from the video clock, this can lead to audio/video
synchronization problems. Setting this to 0 is also consistent with the old
saa7114.c source and the way the Hauppauge Windows driver sets it.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- improve handling of the EXTERN input: don't start an unnecessary carrier scan
- improve the LOG_STATUS output
- ensure that a carrier scan is started again when switching back to the tuner.
- set correct prescale for L-NICAM
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

There is some old code in the or51133 firmware loading function that
has no effect.  Left a comment to in case it helps someone trying
to reverse engineer the chip.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

* master.kernel.org:/home/rmk/linux-2.6-arm: (25 commits)
  [ARM] 3648/1: Update struct ucontext layout for coprocessor registers
  [ARM] Add identifying number for non-rt sigframe
  [ARM] Gather common sigframe saving code into setup_sigframe()
  [ARM] Gather common sigframe restoration code into restore_sigframe()
  [ARM] Re-use sigframe within rt_sigframe
  [ARM] Merge sigcontext and sigmask members of sigframe
  [ARM] Replace extramask with a full copy of the sigmask
  [ARM] Remove rt_sigframe puc and pinfo pointers
  [ARM] 3647/1: S3C24XX: add Osiris to the list of simtec pm machines
  [ARM] 3645/1: S3C2412: irq support for external interrupts
  [ARM] 3643/1: S3C2410: Add new usb clocks
  [ARM] 3642/1: S3C24XX: Add machine SMDK2413
  [ARM] 3641/1: S3C2412: Fixup gpio register naming
  [ARM] 3640/1: S3C2412: Use S3C24XX_DCLKCON instead of S3C2410_DCLKCON
  [ARM] 3639/1: S3C2412: serial port support
  [ARM] 3638/1: S3C2412: core clocks
  [ARM] 3637/1: S3C24XX: Add mpll clock, and set as fclk parent
  [ARM] 3636/1: S3C2412: Add selection of CPU_ARM926
  [ARM] 3635/1: S3C24XX: Add S3C2412 core cpu support
  [ARM] 3633/1: S3C24XX: s3c2410 gpio bugfix - wrong pin nos
  ...

This reverts commit 786dc1d3.

As Al so eloquently points out, the patch is crap. The old code was fine,
the new code was bogus.

It never dereferenced a user pointer, the "->" operator was to an array
member, which gives the _address_ of the member (in user space), not an
actual dereference at all.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Patch from Daniel Jacobowitz

In order for userspace to find saved coprocessor registers, move them from
struct rt_sigframe into struct ucontext.  Also allow space for glibc's
sigset_t, so that userspace and kernelspace can use the same ucontext
layout.  Define the magic numbers for iWMMXt in the header file for easier
reference.  Include the size of the coprocessor data in the magic numbers.

Also define magic numbers and layout for VFP, not yet saved.
Signed-off-by: NDaniel Jacobowitz <dan@codesourcery.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

* 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: radeon constify radeon microcode
  Add i915 ioctls to configure pipes for vblank interrupt.
  drm: update radeon to 1.25 add r200 vertex program support
  drm: radeon add a tcl state flush before accessing tcl vector space

* 'intelfb-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/intelfb-2.6:
  intelfb delousing

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: (40 commits)
  [SPARC64]: Update defconfig.
  [SPARC64]: Make auxio a real driver.
  [PARPORT] sunbpp: Convert to new SBUS device framework.
  [Documentation]: Update probing info in sbus_drivers.txt
  [SCSI] qlogicpti: Convert to new SBUS device framework.
  [SCSI] esp: Fix bug in esp_remove_common.
  [NET] sunhme: Kill useless loop over sdevs in quattro_sbus_find().
  [NET] myri_sbus: Kill unused next_module struct member.
  [NET] myri_sbus: Convert to new SBUS device layer.
  [NET] sunqe: Convert to new SBUS driver layer.
  [NET] sunbmac: Convert over to new SBUS device framework.
  [NET] sunlance: Convert to new SBUS driver framework.
  [NET] sunhme: Convert to new SBUS driver framework.
  [NET] sunhme: Kill __sparc__ and __sparc_v9__ ifdefs.
  [SCSI] sparc: Port esp to new SBUS driver layer.
  [SOUND] sparc: Port amd7930 to new SBUS device layer.
  [SBUS]: Rewrite and plug into of_device framework.
  [SPARC]: Port of_device layer and make ebus use it.
  [SPARC]: Port sparc64 in-kernel device tree code to sparc32.
  [SPARC64]: Add of_device layer and make ebus/isa use it.
  ...

This is the minimal resume trace code to find which device resume (if
any) results in problems.  Usually, you'd use the information this
generates as a starting point to adding more fine-grained trace event
points.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Considering that there isn't a lot of hw we can depend on during resume,
this is about as good as it gets.

This is x86-only for now, although the basic concept (and most of the
code) will certainly work on almost any platform.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

GDB couldn't reliably tell the difference between the old and new
non-rt sigframes, so provide it with a number at the beginning which
will never appear in the old sigframe, and hence provide gdb with a
reliable way to tell the two apart.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Ben Dooks

Enable power management for Simtec Osiris
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Ben Dooks

Move the decoding of the IRQ_EXT4 and above out of
the entry macro, and into an chained irq handler
as the EXTINT registers move depending on the CPU
being used.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Ben Dooks

Make the S3C2410 use the same usb clock naming
as the S3C2412
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Ben Dooks

Add basic support for the Samsung/Aiji SMDK2413
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Ben Dooks

The current S3C2412 has used to moving S3C24XX_
for the generic form of an register has been
moved from the S3C2410.

Fixup S3C2410_EXTINTx and S3C2410_EINFLTx to
S3C24XX_EXTINTx and S3C24XX_EXTINTx

Depends on Patch #3635/1, Patch #3640/1
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Ben Dooks

The current S3C2412 support has moved to using
S3C24XX_DCLKCON unless the specific DCLKCON is
required (S3C2412_DCLKCON or S3C2410_DKCLKCON)

Move the few places using S3C2410_DCLKCON to
S3C24XX_DCLKCON

Depends on Patch #3635/1
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Ben Dooks

Serial port support for the on-board UART blocks
on the Samsung S3C2412 and S3C2413 UARTs.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Ben Dooks

Clock support for the clocks on the Samsung S3C2412
and S3C2413 SoCs. This provides clock enables and
parent selection for all the standard clocks.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Ben Dooks

Update the clocks with the MPLL clock, and
use it as the parent. Also export these to
the rest of arch/arm/mach-s3c2410
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Ben Dooks

Select CONFIG_CPU_ARM926 when CONFIG_CPU_S3C2412 is
selected.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Ben Dooks

Add support for the Samsung S3C2412 and S3C2413 range
of SoCs. This patch contains the core identification,
debug macros, and basic register updates to get these
to build.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Ben Dooks

The s3c2410 gpio functions have a pair of bugs where
the code is using the pin function definitions instead
of the pin gpio numbers.

Also remove the changelog
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Andrew Victor

Remove the remaining legacy __mem_isa() definitions for the ARM
platforms.
Signed-off-by: NAndrew Victor <andrew@sanpeople.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Lennert Buytenhek
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Lennert Buytenhek

The ep93xx ohci bits have been merged into the gregkh-2.6 tree, which
means that they will probably go upstream soon, so make the core ep93xx
code instantiate an appropriate ep93xx-ohci platform device.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Lennert Buytenhek

Add an initial implementation of the clk_* API for the cirrus ep93xx
to the tree.  The initial implementation is somewhat minimal, with the
intention of extending it as we go along.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Lennert Buytenhek

Commit d6551e88 forgot to update the
description of what goes into r2 when calling iwmmxt_task_restore().
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>