- 03 2月, 2008 40 次提交
-
-
由 Bryan Wu 提交于
Signed-off-by: NBryan Wu <bryan.wu@analog.com> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Bryan Wu 提交于
There is no suspend/resume operation in NFC driver at all, currently. Signed-off-by: NBryan Wu <bryan.wu@analog.com> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Li Zefan 提交于
With CONFIG_MTD_PARTITIONS not set, got this: drivers/mtd/nand/plat_nand.c:113: warning: unused variable 'pdata' Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Justin Treon 提交于
Patch for unlocking all Intel flash that has instant locking on power up. The patch has been tested on Intel M18, P30 and J3D Strata Flash. 1. The automatic unlocking can be disabled for a particular partition in the map or the command line. a. For the bit mask in the map it should look like: .mask_flags = MTD_POWERUP_LOCK, b. For the command line parsing it should look like: mtdparts=0x80000(bootloader)lk 2. This will only unlock parts with instant individual block locking. Intel parts with legacy unlocking will not be unlocked. Signed-off-by: NJustin Treon <justin_treon@yahoo.com> Signed-off-by: NJared Hulbert <jaredeh@gmail.com> Acked-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Atsushi Nemoto 提交于
Call parse_mtd_partitions before checking board's partition_info, so that "mtdparts=" option can override board's default setting. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Richard Purdie 提交于
Various minor cleaups to mtdoops: * Don't support the mtd->erasesize < OOPS_PAGE_SIZE case * Tweak printks and make the device mtdoops connects to more visible * CON_PRINTBUFFER flag is uneeded Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Richard Purdie 提交于
Add a spinlock to ensure writes to the mtdoops buffer memory are sequential and don't race. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Richard Purdie 提交于
Writing to the flash needs to be done in a workqueue. The console write functions may be called in any context which can lead to lockups otherwise. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Richard Purdie 提交于
Add further error return code checks to the mtdoops driver. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Roel Kluin 提交于
drivers/mtd/devices/lart.c:119:#define FLASH_DEVICE_16mbit_BOTTOM 0x88f488f4 As was, unless "manufacturer != FLASH_MANUFACTURER" this returned true Signed-off-by: NRoel Kluin <12o3l@tiscali.nl> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
drivers/mtd/ubi/scan.c: In function 'ubi_scan': drivers/mtd/ubi/scan.c:772: warning: 'ec' may be used uninitialized in this function Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
drivers/mtd/ubi/wl.c:746: warning: 'pe' may be used uninitialized in this function Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Scott Wood 提交于
Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Ilpo Järvinen 提交于
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Ilpo Järvinen 提交于
$ codiff $OBJ.old $OBJ drivers/mtd/chips/jedec_probe.c: cfi_jedec_setup | -320 jedec_probe_chip | -7073 2 functions changed, 7393 bytes removed, diff: -7393 drivers/mtd/chips/jedec_probe.c: jedec_reset | +1151 1 function changed, 1151 bytes added, diff: +1151 drivers/mtd/chips/jedec_probe.o: 3 functions changed, 1151 bytes added, 7393 bytes removed, diff: -6242 Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Borislav Petkov 提交于
Since this is used only in idetape_blkdev_ioctl(), remove the typedef and make the struct function-local. Bart: - s/sizeof(struct idetape_config)/sizeof(config)/ Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
Those are already in mtio.h. Bart: - undo 'unsigned int/unsigned long' -> 'uint/ulong' conversion Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
idetape_active_next_stage() was rather ambiguous wrt its purpose. Make that more explicit and remove superfluous comment. Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
This is not a network driver. Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
ide-tape has depended on EXPERIMENTAL for ages. Change that since the driver is being only maintained now. Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
Also, remove those which weren't used. Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
They seem just to sit there completely unused. Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
Also, shorten function name idetape_get_blocksize_from_block_descriptor() and move its definition up thereby getting rid of its forward declaration. Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
There should be no functional changes resulting from this patch. Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
There should be no functional changes resulting from this patch. Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
There should be no functional changes resulting from this patch. Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
All those 2-byte values denoting the different capabilities are being written to the local copy of the caps buffer without being converted to big endian for simplicity of usage and shorter code later. Also, we add some comments stating which are the fields of the caps page in question in order to alleviate the cryptic pointer casting exercises as in e.g. idetape_get_mode_sense_results(). There should be no functional changes resulting from this patch. Bart: - remove two needless "!!" Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
The device capabilities are probed for during device initialization so this info is available through proc/ioctl() und it is redundant here. Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Cc: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
Bart: - remove 'capabilities->speed' chunk - re-add brackets to block_descrp assignment Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
Bart: - remove unnecessary comment change - remove two needless "!!" Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
Also, cleanup whitespace and update comments. Bart: - remove reference to drivers/block/ide.c - move driver documentation to Documentation/ide/ide-tape.txt Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
No reason to use ide_init_hwif_ports() in ide-cs (as a nice side-effect this makes ide-cs work on archs that don't define IDE_ARCH_OBSOLETE_INIT). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Move check_dma_crc() to ide-dma.c and add inline version for CONFIG_BLK_DEV_IDEDMA=n case. * Rename check_dma_crc() to ide_check_dma_crc(). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
While at it: * Remove needless '!drive->crc_count' check. Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-