- 17 10月, 2007 3 次提交
-
-
由 Michal Januszewski 提交于
Currently, if the refresh rate is not specified, fb_find_mode() returns the first known video mode with the requested resolution, which provides no guarantees wrt the refresh rate. Change this so that the mode with the highest refresh rate is returned when the driver provides a custom video mode database and the monitor limits, and a mode with the safe 60 Hz refresh rate otherwise. Signed-off-by: NMichal Januszewski <spock@gentoo.org> Signed-off-by: NAntonino Daplas <adaplas@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Antonino A. Daplas 提交于
Reported by: John Lumby <johnlumby@hotmail.com> Some of the entries in the mode database does not match the comments and/or the refresh field. Adjust the timings so they match with both the comments and the refresh rate. Signed-off-by: NAntonino Daplas <adaplas@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Januszewski 提交于
Make fb_destroy_modelist an exported symbol for use in the uvesafb driver. Signed-off-by: NMichal Januszewski <spock@gentoo.org> Signed-off-by: NAntonino Daplas <adaplas@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 5月, 2007 1 次提交
-
-
由 Robert P. J. Day 提交于
Following the programming advice laid down in the gcc manual, make sure the case "..." operator has spaces on either side. Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 2月, 2007 1 次提交
-
-
由 Tim Schmielau 提交于
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: NTim Schmielau <tim@physik3.uni-rostock.de> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 2月, 2007 3 次提交
-
-
由 Geert Uytterhoeven 提交于
fb_videomode_to_var(): reset the virtual screen parameters when converting from an fb_videomode to an fb_var_screeninfo. Without this the old virtual screen parameters are kept. Hence you cannot switch to a video mode with a lower resolution on frame buffer devices that don't support virtual screens and panning, as values are not supposed to be rounded down when they don't fit. I also reordered the assignments to match the order of the individual members. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: James Simmons <jsimmons@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
fbdev modedb: make more input and output pointer parameters const Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: James Simmons <jsimmons@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
fbdev modedb: Take into account the specified refresh rates for video modes specified by name, so e.g. all of `720p', `720p@60', and `720p@50' work. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: James Simmons <jsimmons@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 12月, 2006 1 次提交
-
-
由 Jordan Crouse 提交于
If no default mode is specified, it should be grabbed from the supplied database, not the default one. [teanropo@jyu.fi: fix it] [akpm@osdl.org: simplify it] [akpm@osdl.org: remove pointless DEFAULT_MODEDB_INDEX] Signed-off-by: NJordan Crouse <jordan.crouse@amd.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NTero Roponen <teanropo@jyu.fi> Cc: James Simmons <jsimmons@infradead.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 11 7月, 2006 1 次提交
-
-
由 Jon Smirl 提交于
MAX_NR_CONSOLES, fg_console, want_console and last_console are more of a function of the VT layer than the TTY one. Moving these to vt.h and vt_kern.h allows all of the framebuffer and VT console drivers to remove their dependency on tty.h. [akpm@osdl.org: fix alpha build] Signed-off-by: NJon Smirl <jonsmir@gmail.com> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 27 6月, 2006 3 次提交
-
-
由 Adrian Bunk 提交于
This patch removes the following unused EXPORT_SYMBOL's: - fbcvt.c: fb_find_mode_cvt - fbmem.c: fb_con_duit - fbmem.c: fb_new_modelist - macmodes.c: mac_var_to_vmode - modedb.c: fb_delete_videomode - modedb.c: fb_destroy_modelist Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
It's a false positive, but let's suppress it anyway. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dennis Munsie 提交于
Adds 1366x768 @ 60Hz to drivers/video/modedb.c. Signed-off-by: NDennis Munsie <dmunsie@cecropia.com> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 28 3月, 2006 2 次提交
-
-
由 Tobias Klauser 提交于
Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) and remove duplicates of ARRAY_SIZE. Some coding style and trailing whitespaces are also fixed. Compile-tested where possible (some are other arch or BROKEN) Signed-off-by: NTobias Klauser <tklauser@nuerscht.ch> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Olaf Hering 提交于
Add a modeline for the Philips 200W display. aty128fb does not do DDC, it picks 1920x1440 or similar. It works ok with nvidiafb because it can ask for DDC data. mode "1680x1050-60" # D: 146.028 MHz, H: 65.191 kHz, V: 59.863 Hz geometry 1680 1050 1680 1050 16 timings 6848 280 104 30 3 176 6 hsync high vsync high rgba 5/11,6/5,5/0,0/0 endmode hwinfo --monitor 20: None 00.0: 10000 Monitor [Created at monitor.206] Unique ID: rdCR.pzUFTofo1S4 Parent ID: 002j.bJRsY88eNSC Hardware Class: monitor Model: "PHILIPS Philips 200W" Vendor: PHL "PHILIPS" Device: eisa 0x0832 "Philips 200W" Serial ID: "VN 016596" Resolution: 720x400@70Hz Resolution: 640x480@60Hz Resolution: 640x480@67Hz Resolution: 640x480@72Hz Resolution: 640x480@75Hz Resolution: 800x600@56Hz Resolution: 800x600@60Hz Resolution: 800x600@72Hz Resolution: 800x600@75Hz Resolution: 832x624@75Hz Resolution: 1024x768@60Hz Resolution: 1024x768@70Hz Resolution: 1024x768@75Hz Resolution: 1280x1024@75Hz Resolution: 1152x864@70Hz Resolution: 1152x864@75Hz Resolution: 1280x960@60Hz Resolution: 1280x1024@60Hz Resolution: 1680x1050@60Hz Size: 433x271 mm Driver Info #0: Max. Resolution: 1680x1050 Vert. Sync Range: 56-85 Hz Hor. Sync Range: 30-93 kHz Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #5 (VGA compatible controller) Signed-off-by: NOlaf Hering <olh@suse.de> Acked-by: N"Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 09 11月, 2005 1 次提交
-
-
由 Michael Hanselmann 提交于
This patch adds the framebuffer mode required for an Apple PowerBook G4 Titanium. Signed-off-by: NMichael Hanselmann <linux-kernel@hansmi.ch> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 07 11月, 2005 2 次提交
-
-
由 Antonino A. Daplas 提交于
Add new helper, fb_find_best_display(), which will search the modelist for the best mode for the attached display. This requires an EDID block that is converted to struct fb_monspecs and a private modelist. The search will be done in this manner: - if 1st detailed timing is preferred, use that - else if dimensions of the display are known, use that to estimate xres and - else if modelist has detailed timings, use the first detailed timing - else, use the very first entry from the modelist Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michal Januszewski 提交于
Currently the fb_find_nearest_mode() function finds a mode with screen resolution closest to that described by the 'var' argument and with some arbitrary refresh rate (eg. in the following sequence of refresh rates: 70 60 53 85 75, 53 is selected). This patch fixes the function so that it looks for the closest mode as far as both resolution and refresh rate are concerned. The function's first argument is changed to fb_videomode so that the refresh rate can be specified by the caller, as fb_var_screeninfo doesn't have any fields that could directly hold this data. Signed-off-by: NMichal Januszewski <spock@gentoo.org> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 10 9月, 2005 1 次提交
-
-
由 Antonino A. Daplas 提交于
The Coordinated Video Timings (CVT) is the latest standard approved by VESA concerning video timings generation. It addresses the limitation of GTF which is designed mainly for CRT displays. CRT's have a high blanking requirement (as much as 25% of the horizontal frame length) which artificially increases the pixelclock. Digital displays, on the other hand, needs to conserve the pixelclock as much as possible. The GTF also does not take into account the different aspect ratios in its calculation. The new function added is fb_find_mode_cvt(). It is called by fb_find_mode() if it recognizes a mode option string formatted for CVT. The format is: <xres>x<yres>[M][R][-<bpp>][<at-sign><refresh>][i][m] The 'M' tells the function to calculate using CVT. On it's own, it will compute a timing for CRT displays at 60Hz. If the 'R' is specified, 'reduced blanking' computation will be used, best for flatpanels. The 'i' and the 'm' is for 'interlaced mode' and 'with margins' respectively. To determine if CVT was used, check for dmesg for something like this: CVT Mode - <pix>M<n>[-R], ie: .480M3-R (800x600 reduced blanking) where: pix - product of xres and yres, in MB M - is a CVT mode n - the aspect ratio (3 - 4:3; 4 - 5:4; 9 - 16:9, 15:9; A - 16:10) -R - reduced blanking Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 09 8月, 2005 1 次提交
-
-
由 Antonino Daplas 提交于
Reported by:Vincent Fortier (Bugzilla Bug 4768) "At boot time the screen appears moved to the mid right portion of the actual video pannel making the end of the line appears at the left edge... It simply looks like moved half way to the right" His particular hardware has a display with an unusual dimension (1920x1200) but unfortunately has no EDID block. None of the entries in the global mode database is correct for this particular display, and it particularly has difficulty scaling up 640x480 (the default startup mode of nvidiafb) to 1920x1200 which causes the above described problem. 1, Add 1920x1200 to the global mode database. 2. Let nvidiafb base the startup mode from the flatpanel dimensions only if the EDID block is absent, no boot mode parameter is specified by the user, and a flatpanel/LCD display is attached. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-