Find out at browser startup the max width and use it when rendering jump
labels on the screen.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-7dxjiwqb77wz6f5lc05e0i0x@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This:

    0.00 :         ffffffff8116bd00:       lock btsl $0x0,(%r12)
  100.00 :         ffffffff8116bd07:       sbb    %eax,%eax
    0.00 :         ffffffff8116bd09:       test   %eax,%eax
    0.00 :         ffffffff8116bd0b:       jne    ffffffff8116bf5f <__mem_cgroup_commit_charge+0x28f>
    0.00 :         ffffffff8116bd11:       mov    (%r12),%rax
    0.00 :         ffffffff8116bd15:       test   $0x2,%al
    0.00 :         ffffffff8116bd17:       jne    ffffffff8116bf6e <__mem_cgroup_commit_charge+0x29e>
    0.00 :         ffffffff8116bd1d:       test   %r9b,%r9b
    0.00 :         ffffffff8116bd20:       jne    ffffffff8116be30 <__mem_cgroup_commit_charge+0x160>
    0.00 :         ffffffff8116bd26:       xor    %eax,%eax
    0.00 :         ffffffff8116bd28:       mov    %r13,0x8(%r12)
    0.00 :         ffffffff8116bd2d:       lock orb $0x2,(%r12)
    0.00 :         ffffffff8116bd33:       test   %r9b,%r9b
    0.00 :         ffffffff8116bd36:       je     ffffffff8116bdf3 <__mem_cgroup_commit_charge+0x123>

Becomes:

    0.00 :         30:       lock btsl $0x0,(%r12)
  100.00 :                   sbb    %eax,%eax
    0.00 :                   test   %eax,%eax
    0.00 :                   jne    28f
    0.00 :                   mov    (%r12),%rax
    0.00 :                   test   $0x2,%al
    0.00 :                   jne    29e
    0.00 :                   test   %r9b,%r9b
    0.00 :                   jne    160
    0.00 :         56:       xor    %eax,%eax
    0.00 :         58:       mov    %r13,0x8(%r12)
    0.00 :                   lock orb $0x2,(%r12)
    0.00 :                   test   %r9b,%r9b
    0.00 :                   je     123

I.e. We trow away all those useless addresses and keep just jump labels.
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-r2vmbtgz0l8coluj8flztgrn@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fixing some off by one cases in the process.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-fxumzufhk829z0q9anmvemea@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Its not just an rb_node, it carries extra state that is private to the
browser. And will carry some more in the next patches.

Better name it browser_disasm_line, i.e. something derived from
disasm_line, that specializes it.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-nev4b97vdvv35we1qmooym52@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

And implement the jump one, where if the operands string is not passed,
a compact form that uses just the target address is used.

Right now this is toggled via the 'o' option in the annotate browser,
switching from:

    0.00 :         ffffffff811661e8:       je     ffffffff81166204 <mem_cgroup_count_vm_event+0x44>
    0.00 :         ffffffff811661ea:       cmp    $0xb,%esi
    0.00 :         ffffffff811661ed:       je     ffffffff811661f8 <mem_cgroup_count_vm_event+0x38>

To:

    0.00 :         28:       je     44
    0.00 :         2a:       cmp    $0xb,%esi
    0.00 :         2d:       je     38
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-o88q46yh4kxgpd1chk5gvjl5@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

No need to do it everytime the user presses enter/-> on a call
instruction.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ybgss44m5ycry8mk7b1qdbre@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

So that at disassembly time we parse targets, etc.

Supporting jump instructions initially, call functions are next.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-7vzlh66n5or46n27ji658cnl@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

No need to reparse it everytime.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-90ncot487p4h5rzkn8h2whou@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

For lines with instructions find the name and operands, breaking those
tokens for consumption by the browser.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6aazb9f5o3d9zi28e6rruv12@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We want to move away from using 'objdump -dS' as the only disassembler
supported.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-lsn9pjuxxm5ezsubyhkmprw7@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Use cpu-clock-tick sw counter for cpu-cycles only if there is no hw
pmu available. This is the case if the syscall reports ENOENT. In
other cases (e.g. invalid attributes) we don't want the sw counter to
be used.

Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1333643188-26895-5-git-send-email-robert.richter@amd.comSigned-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Thread map is actually type pid_t and not int.
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1333643188-26895-3-git-send-email-robert.richter@amd.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This references are not exported, use static declaration.
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1333643188-26895-4-git-send-email-robert.richter@amd.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Move those files to new directory in order to be prepared to
further UI work. Makefile and header file pathes are adjusted
accordingly. Also fix a build breakage if NO_GTK2=1 is given.
Signed-off-by: NNamhyung Kim <namhyung.kim@lge.com>
Suggested-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Acked-by: NPekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl
Link: http://lkml.kernel.org/r/1333523765-12092-1-git-send-email-namhyung.kim@lge.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Move those files to new directory in order to be prepared to further UI
work. Makefile and header file pathes are adjusted accordingly.
Signed-off-by: NNamhyung Kim <namhyung.kim@lge.com>
Suggested-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Acked-by: NPekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl
Link: http://lkml.kernel.org/r/1333523666-12057-1-git-send-email-namhyung.kim@lge.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

    CC util/annotate.o
util/annotate.c: In function symbol__annotate:
util/annotate.c:87:16: error: parsed_line may be used uninitialized in this function [-Werror=maybe-uninitialized]
util/annotate.c:211:22: note: parsed_line was declared here
cc1: all warnings being treated as errors
make: *** [util/annotate.o] Error 1
make: *** Waiting for unfinished jobs....
Signed-off-by: NNamhyung Kim <namhyung.kim@lge.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ashay Rane <ashay.rane@tacc.utexas.edu>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/87ty0tlv4i.fsf@dasan.aot.lge.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Currently the parsers objects (bison/flex related) are each time perf
is built. No matter the generated files are already in place, the
parser generation is executed every time.

Changing the rules to have proper flex/bison objects generation
dependencies.

The parsers code is not rebuilt until the flex/bison source files
are touched. Also when flex/bison source is changed, only dependent
objects are rebuilt.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1334140791-3024-1-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Put generic enough build settings which could be reused by other tools
into a common Makefile.include file.

This commit reintroduces QUIET_SUBDIR{0,1} (see a3d1ee10) which are
going to be used in the following patches.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: http://lkml.kernel.org/r/1334162178-17152-2-git-send-email-bp@amd64.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The commit 65f3e56e ("perf tools: Remove auto-generated bison/flex
files") removed those files from git, so they'll be listed on untracked
files after building perf. Fix it.
Signed-off-by: NNamhyung Kim <namhyung.kim@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1333948274-20043-1-git-send-email-namhyung.kim@lge.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Using the same keystrokes as vim:

/ = search forward
n = search next forward/backwards
? = search backwards

Still needs to continue from start/end when not found, use HOME + / or
END + ? for now.

At some point we need a keybindings file to support ones favourite mode,
erm, like EMACS, etc.

Also we now need a 'h' window with all these keybindings.
Requested-by: NAndi Kleen <andi@firstfloor.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-rv30xj2i258n0gwkzlu0c0bc@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch prints the number of samples and the count of performance
events separately.

This allows comparing performance of different applications with each
other.

Previously, the sample count was displayed against an 'Events:' heading.
With this patch, the header now reads (for example):

Samples: 5K of event 'instructions'
Event count (approx.): 2993026545

The patch covers both the stdio and the browser interface.
Signed-off-by: NAshay Rane <ashay.rane@tacc.utexas.edu>
[ committer note: Fixed wrt e7f01d1e ]
Link: http://lkml.kernel.org/n/tip-h4nfjm8msedlk8gxkzivfh5y@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Now it is possible to press ENTER or -> (right arrow) on jump
instructions to navigate to the offset it points to.

More work needed to support <- to go back, i.e. a jump history.

This is done just like the callq case, i.e. parsing objdump output
lines, but should move to use Masami's disassembler at some point.
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-706qqe2xibeiocuabp39mby7@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

From the hit sorted rb_tree, so that we can use it in the upcoming jump
instruction support.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-44a7kl2atf9jxlg9npmotzdg@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

So that we can as well handle jumps. Later we'll move this to a proper
intruction table, etc.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-i98elvmix2cw6t8stu1iagfd@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The lines in objdump have this format:

    ffffffff8126543f:       jne    ffffffff81265494 <__list_del_entry+0x84>
<SNIP>
    ffffffff81265494:       mov    %rdi,%rcx

Since we now have objdump_line allowing tools to print the offset
independently from the rest of the line, allow toggling a view where
just offsets from the start of the function are shown:

     2f:       jne    ffffffff81265494 <__list_del_entry+0x84>
<SNIP>
     84:       mov    %rdi,%rcx

The offset view will be the default as soon as operations that deal with
offsets in a function are handled accodringly, i.e. in offset view the
above will become:

     2f:       jne    __list_del_entry+0x84
<SNIP>
     84:       mov    %rdi,%rcx

And then a follow up patch will allow navigating thru jumps, just like
we handle callq instructions.
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-4zpgimmz8xv7b5c920el7s45@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

And by default use "magenta" for it.

Both the --stdio and --tui routines follow the same semantics.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ede5zkaf7oorwvbqjezb4yg4@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Tools that want to change parts of the line to a different color and
then restore the previous one will use this, starting with the annotate
browser that will change the color of addresses if not on the current
entry, i.e. the selected one.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-uiajpevhxo4mzrvna6remb4a@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This routine was checking only if the provided address was after
sym->end, not if it was before sym->start.

Fix that by checking for both and return in both cases -ERANGE, so that
tools can communicate this to the user properly, or if they chose so, to
abort.

This problem was reported previously but the fixes involved either doing
what was being done for the > end case, i.e. silently drop the sample,
returning 0, or aborting at this function, which is in a lib (or better,
is slated to be at some point) and shouldn't abort.

The 'report' tool already checks this value and uses pr_debug to warn
the user.

This patch makes the 'top' tool check it too and warn once per map where
such range problem takes place.
Reported-by: NDavid Miller <davem@davemloft.net>
Reported-by: NSorin Dumitru <dumitru.sorin87@gmail.com>
Reported-by: NStephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-lw8gs7p9i9nhldilo82tzpne@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

If there's an event with no samples in data file, the perf report
command can segfault after entering the event details menu.

Following steps reproduce the issue:

 # ./perf record -e syscalls:sys_enter_kexec_load,syscalls:sys_enter_mmap ls
 # ./perf report
 # enter '0 syscalls:sys_enter_kexec_load' menu
 # pres ENTER twice

Above steps are valid assuming ls wont run kexec.. ;)

The check for sellection to be NULL is missing. The fix makes sure it's
being check. Above steps now endup with menu being displayed allowing
'Exit' as the only option.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1333570898-10505-2-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When a process exec()'s, all the maps are retired, but we keep the hist
entries around which hold references to those outdated maps.

If the same library gets mapped in for which we have hist entries, a new
map will be created.  But when we take a perf entry hit within that map,
we'll find the existing hist entry with the older map.

This causes symbol translations to be done incorrectly.  For example,
the perf entry processing will lookup the correct uptodate map entry and
use that to calculate the symbol and DSO relative address.  But later
when we update the histogram we'll translate the address using the
outdated map file instead leading to conditions such as out-of-range
offsets in symbol__inc_addr_samples().

Therefore, update the map of the hist_entry dynamically at lookup/
creation time.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Cc: stable@kernel.org
Link: http://lkml.kernel.org/r/20120327.031418.1220315351537060808.davem@davemloft.netSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We were only decaying the entries for the offsets that were associated
with an objdump line.

That way, when we accrued the whole instruction addr range, more than
100% was appearing in some cases in the live annotation TUI.

Fix it by not traversing the source code line at all, just iterate thru
the complete addr range decaying each one.
Reported-by: NMike Galbraith <mgalbraith@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-hcae5oxa22syjrnalsxz7s6n@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

TODO: Accrue the cycles in the skip_list to an idle total, and show this
on the 'top' UI, as suggested by Steven.

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-9nfecmgghgl5747rjxqpc28f@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

On a system running glibc trunk perf doesn't build:

    CC builtin-sched.o
builtin-sched.c: In function ‘get_cpu_usage_nsec_parent’: builtin-sched.c:399:16: error: storage size of ‘ru’ isn’t known builtin-sched.c:403:2: error: implicit declaration of function ‘getrusage’ [-Werror=implicit-function-declaration]
    [...]

Fix it by including sys/resource.h.
Signed-off-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120404084527.GA294@x4Signed-off-by: NIngo Molnar <mingo@kernel.org>

These should not be in the Git history - they are auto-generated.

Extend the Makefile rules of the parser files to include the generation
run.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120327183335.GA27621@gmail.com
[ committer note: Fixed up O= handling ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We were not noticing it because symbol__inc_addr_samples was erroneously
dropping samples that hit the last byte in a function.

Working on a fix for a problem reported by David Miller, Stephane
Eranian and Sorin Dumitru, where addresses < sym->start were causing
problems, I noticed this other problem.

Cc: David Ahern <dsahern@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sorin Dumitru <dumitru.sorin87@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pqjaq4cr1xs2xen73pjhbav4@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The commit 89812fc8 ("perf tools: Add parser generator for events
parsing") changed event parsing engine but missed the ref-cycles event.
Add it.
Signed-off-by: NNamhyung Kim <namhyung.kim@lge.com>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1333016517-10591-1-git-send-email-namhyung.kim@lge.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Therefore, in symbol__get_source_line(), use map__rip_2objdump
instead of calling map->unmap_ip() unconditionally.

Link: http://lkml.kernel.org/r/20120325.162812.59519424882536855.davem@davemloft.netSigned-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

If DIE entries corresponding to declarations appear before definition
entry, probe finder returns error instead of continuing to look further
for a definition entry.

This patch ensures we reach to the DIE entry corresponding to the
definition and get the function address.

V2: A simpler solution based on Masami's suggestion.
Signed-off-by: NPrashanth Nageshappa <prashanth@linux.vnet.ibm.com>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/4F703FB9.9020407@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We should use "[unknown]" in this case, in concert with the code in
_hist_entry__dso_snprintf().

Otherwise we'll crash when recomputing the histogram column lengths in
hists__calc_col_len().
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Link: http://lkml.kernel.org/r/20120325.162822.2267799792062571623.davem@davemloft.netSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

That causes us to end up using the XPG version of basename which can
modify it's argument.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Link: http://lkml.kernel.org/r/20120327.000301.1122788061724345175.davem@davemloft.netSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>