- 13 8月, 2013 3 次提交
-
-
由 Tomasz Figa 提交于
This patch removes remaining inclusions of plat/regs-timer.h as a preparation to remove the header. As a part of this, things like save and restore of PWM registers are removed from SoC-specific code, because it is handled in appropriate drivers now. Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com> Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: NHeiko Stuebner <heiko@sntech.de> Tested-by: NMark Brown <broonie@linaro.org> Tested-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Tomasz Figa 提交于
Since all the used PWM prescalers and dividers configuration has been moved to appropriate drivers, the pwm-clock infrastructure is now unused and so this patch removes it. Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com> Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: NHeiko Stuebner <heiko@sntech.de> Tested-by: NMark Brown <broonie@linaro.org> Tested-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Tomasz Figa 提交于
This patch modifies any board files using the legacy PWM device to use the new device instead. Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com> Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: NHeiko Stuebner <heiko@sntech.de> Tested-by: NMark Brown <broonie@linaro.org> Tested-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
- 06 8月, 2013 4 次提交
-
-
由 Tomasz Figa 提交于
As the need for an IRQ chip handling PWM timer interrupt chaining is gone now, this patch removes all the code made unnecessary. Signed-off-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: NHeiko Stuebner <heiko@sntech.de> Tested-by: NMark Brown <broonie@linaro.org> Tested-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Tomasz Figa 提交于
This patch moves all Samsung platforms using PWM clocksource from legacy samsung-time to new samsung-pwm-timer driver. Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com> Reviewed-by: NDaniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: NHeiko Stuebner <heiko@sntech.de> Tested-by: NMark Brown <broonie@linaro.org> Tested-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Tomasz Figa 提交于
This patch adds PWM platform data needed for legacy (non-DT) platforms to handle SoC-specific bits of the PWM/timer block. Signed-off-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: NHeiko Stuebner <heiko@sntech.de> Tested-by: NMark Brown <broonie@linaro.org> Tested-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Tomasz Figa 提交于
This patch makes all defintions of timer block base address use the same prefix to allow using the common name to define platform device resource. Signed-off-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: NHeiko Stuebner <heiko@sntech.de> Tested-by: NMark Brown <broonie@linaro.org> Tested-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
-
- 10 7月, 2013 1 次提交
-
-
由 Robin Holt 提交于
Preparing to move the parsing of reboot= to generic kernel code forces the change in reboot_mode handling to use the enum. [akpm@linux-foundation.org: fix arch/arm/mach-socfpga/socfpga.c] Signed-off-by: NRobin Holt <holt@sgi.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Russ Anderson <rja@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 19 6月, 2013 2 次提交
-
-
由 Tomasz Figa 提交于
This patch moves all platforms using the legacy watchdog reset helper function to the new watchdog reset driver. Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com> Tested-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Tushar Behera 提交于
For mach-exynos, uart_base is a pointer and the value is calculated in the machine folder. For other machines, uart_base is defined as a macro in platform directory. For symmetry, the uart_base macro definition is removed and the uart_base calculation is moved to specific machine folders. This would help us consolidating uncompress subroutine for s5p64x0. Signed-off-by: NTushar Behera <tushar.behera@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 26 4月, 2013 1 次提交
-
-
由 Daniel Lezcano 提交于
Remove the duplicated code and use the cpuidle common code for initialization. Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org> Acked-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 23 4月, 2013 1 次提交
-
-
由 Daniel Lezcano 提交于
The en_core_tk_irqen flag is set in all the cpuidle driver which means it is not necessary to specify this flag. Remove the flag and the code related to it. Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Kevin Hilman <khilman@linaro.org> # for mach-omap2/* Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 19 4月, 2013 1 次提交
-
-
由 Arnd Bergmann 提交于
The move is necessary to support early debug output on exynos with multiplatform configurations. This implies also moving the plat/debug-macro.S file, but we are leaving the remaining users of that file in place, to avoid adding large numbers of extra configuration options to Kconfig.debug Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
- 12 4月, 2013 1 次提交
-
-
由 Arnd Bergmann 提交于
The definitions have moved to include/linux/usb/samsung-usb-phy.h, and plat/usb-phy.h is unavailable from drivers in a multiplatform configuration. Also fix up the plat/usb-phy.h header file to use the definitions from the new header instead of providing a separate copy. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 09 4月, 2013 1 次提交
-
-
由 Paul Bolle 提交于
Twelve Kconfig symbols, all related to WM8350, WM8351, and WM8352, are unused. Commit 19d57ed5 ("mfd: Remove custom wm8350 cache implementation") removed all their (actual) users. Remove these symbols too. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 08 4月, 2013 2 次提交
-
-
由 Mark Brown 提交于
Allow the user to configure edge triggered IRQs, though we do not yet fully handle new interrupts occurring while an interrupt is being handled. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Padmavathi Venna 提交于
This patch removes the usage of DMACH_DT_PROP and dt_dmach_prop from dma code as the new generic dma dt binding support has been added. Signed-off-by: NPadmavathi Venna <padma.v@samsung.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 04 4月, 2013 3 次提交
-
-
由 Charles Keepax 提交于
A slightly slower rate provides more reliable jack detection during slower insertions. Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Charles Keepax 提交于
This patch clears the DMA flags when a DMA channel is requested. This is necessary because otherwise the channel may inherit incompatible settings from its last usage. Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Paul Bolle 提交于
Commit a07613a5 ("Merge branch 'samsung/dt' into samsung/cleanup") added this line to arch/arm/mach-s3c64xx/Makefile: obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o But at that time CONFIG_S3C64XX_DEV_SPI wasn't a valid Kconfig macro anymore and arch/arm/mach-s3c64xx/dev-spi.c was already removed. So we can remove this line. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 05 3月, 2013 1 次提交
-
-
由 Romain Naour 提交于
Signed-off-by: NNaour Romain <romain.naour@openwide.fr> [tomasz.figa@gmail.com: tested on a Tiny6410 board] Reviewed-and-Tested-by: NTomasz Figa <tomasz.figa@gmail.com> Reviewed-by: NHeiko Stuebner <heiko@sntech.de> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 31 1月, 2013 1 次提交
-
-
由 Abhilash Kesavan 提交于
As per the Exynos5250 User Manual: When there are pending interrupt events, WFI/WFE instruction are ignored. To cancel the power-down sequence follow these steps: 1) Disable system power-down using CENTRAL_SEQ_CONFIGURATION register 2) Clear WAKEUP_STAT register 3) Enable interrupt service routine for CPU Code for early wakeup for exynos already exists. Remove the panic on suspend failure, clear the wakeup state register and return 1 from cpu_suspend to indicate a failed suspend (to a user daemon). Older Samsung SoCs have similar panics and I have removed them all. Haven't touched the S3C2410 sleep code. Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 17 1月, 2013 2 次提交
-
-
由 Dimitris Papastamos 提交于
We are using S3C_EINT(4) instead of S3C_EINT(5). Signed-off-by: NDimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Tomasz Figa 提交于
If there is no board selecting CONFIG_S3C_DEV_FB enabled, build will fail on arch/arm/mach-s3c64xx/pm.c, where s3c_device_fb is referenced. This patch adds ifdef guard around the code making it compile only when CONFIG_S3C_DEV_FB is enabled. Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 13 1月, 2013 4 次提交
-
-
由 Alessandro Rubini 提交于
The header is used by drivers/dma/amba-pl08x.c, which can be compiled under x86, where PL080 exists under a PCI-to-AMBA bridge. This patche moves it where it can be accessed by other architectures, and fixes all users. Signed-off-by: NAlessandro Rubini <rubini@gnudd.com> Acked-by: NGiancarlo Asnaghi <giancarlo.asnaghi@st.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NVinod Koul <vinod.koul@intel.com>
-
由 Rob Herring 提交于
Now that we have VIC moved to drivers/irqchip and all VIC DT init for platforms using irqchip_init, move gic.h and update the remaining includes. Signed-off-by: NRob Herring <rob.herring@calxeda.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Rubini <rubini@unipv.it> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Cc: STEricsson <STEricsson_nomadik_linux@list.st.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: linux-samsung-soc@vger.kernel.org
-
由 Rob Herring 提交于
Numerous includes of asm/hardware/vic.h aren't needed, so remove them. Signed-off-by: NRob Herring <rob.herring@calxeda.com> Acked-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Hubert Feurstein <hubert.feurstein@contec.at> Cc: Alessandro Rubini <rubini@unipv.it> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Cc: STEricsson <STEricsson_nomadik_linux@list.st.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Acked-By: NMaxime Ripard <maxime.ripard@free-electrons.com> Cc: linux-samsung-soc@vger.kernel.org Cc: patches@opensource.wolfsonmicro.com Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Rob Herring 提交于
Now that the VIC initialization sets up the handle_arch_irq pointer, we can remove it for all machines and make it static. Move vic_handle_irq to avoid a forward declaration. Signed-off-by: NRob Herring <rob.herring@calxeda.com> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Hubert Feurstein <hubert.feurstein@contec.at> Cc: Alessandro Rubini <rubini@unipv.it> Cc: STEricsson <STEricsson_nomadik_linux@list.st.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Acked-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: NJamie Iles <jamie@jamieiles.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Acked-by: NKukjin Kim <kgene.kim@samsung.com> Acked-by: NOlof Johansson <olof@lixom.net> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
- 11 1月, 2013 7 次提交
-
-
由 Tomasz Figa 提交于
Recently the regs-syscon-power.h header was moved from mach-s3c64xx/include/mach to mach-s3c64xx/, but cpuidle.c was not updated to include the header from its new location, which caused build error with CONFIG_CPU_IDLE enabled. This patch fixed the problem by updating the include line with proper header location. Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
The header file can be local in mach-s3c64xx/. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
The header file can be local in mach-s3c64xx/. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
The header file can be local in mach-s3c64xx/. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
The header can be local in mach-s3c64xx/. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
The header can be local in mach-s3c64xx/. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
The header can be local in mach-s3c64xx/. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 04 1月, 2013 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 25 12月, 2012 1 次提交
-
-
由 Stephen Warren 提交于
Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: NRobert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: NStephen Warren <swarren@nvidia.com>
-
- 20 12月, 2012 1 次提交
-
-
由 Padmavathi Venna 提交于
I2S controller has an internal mux for RCLK source clks. The list of source clk names were passed through platform data in non-dt case. Register the existing RCLK source clocks with clkdev using generic connection id. This is required as part of adding DT support for I2S controller driver. Signed-off-by: NPadmavathi Venna <padma.v@samsung.com> Acked-by: NSangbeom Kim <sbkim73@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 07 12月, 2012 1 次提交
-
-
由 Padmavathi Venna 提交于
Previously, the ASoC 'platform' (PCM/DMA) object was instantiated via a platform_device. This didn't represent the hardware well, since there was no separate hardware associated with this platform_device; it was a virtual device with sole purpose to call snd_soc_register_platform(). This change removes the platform_device completely. Each Samsung DAI now registers the ASoC 'platform' itself. Machine drivers are adjusted for the new 'platform' name. Signed-off-by: NPadmavathi Venna <padma.v@samsung.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 28 11月, 2012 1 次提交
-
-
由 Mark Brown 提交于
These are not actually connected but it saves them going through probe deferral. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-